I want to recreate the method drawRect with a nested for-loop
I have absolutely no idea how to start to create a method that will draw an unfilled rect. on the picture instantiated.
The constructor of the class eats the following parameters:
int width, int height
I have the Color class imported and I use the usual parameters:
int xStartingPt, int yStartingPt, int width, int height, Color color
Please help me get started.
And when you have a specific question, post you code and ask it.
Read the tutorial as suggested, you don't "draw onto the image". If you do a quick check of the API for Image or BufferedImage, you'll very soon come to that conclusion.
Similar Messages
-
Multiplication Table with Two Nested For Loops
I am trying to code a multiplication table in which the user enters the number of rows between 2 and 10 and enters the number of columns from 2 to 10. This must be in nested for loop format somewhat like this:
rows has been assigned the input variable for rows and columns is the name for input value for columns
for (int i = 1; i <=rows; i++)
for (int j = 1; j <=columns; j++)
i * j
i can't figure out how to get it to print out in table format or if the calculation coding is correct. can anyone help me please?
it should look like this for rows is 4 and columns is 7
1 2 3 4 5 6 7
2 4 6 8 10 12 14
3 6 9 12 15 18 21
4 8 12 16 20 24 28
Edited by: hatecodingsomuch on Feb 22, 2009 8:15 PMhatecodingsomuch wrote:
I refuse to ask for help from people who are acting like they are all-knowing and unwilling to help someone, considering I am asking for help...to learn. Obviously I am not understanding java very well and I don't need to be ridiculed like this from members who are supposed to help "NEW TO JAVA" individuals. Get off your high horse or get off the website. I will never use this again.Good luck with that.
You do seem to be yet another "do my homework for me" type of flunkie. I predict you'll soon have an epiphany that software development really isn't for you.
I hope you know how to say "Do you want fries with that, sir?" better than the next guy so you can edge him out. -
Want to print the whole month with or without overtime for each employee
Hi,
I have Oracle forms/reports10g R2, Below query returns employee overtime correctly but I want to add the whole month with it in simple words if one employee have overtime for five days in a month I want the query to return the whole month including five overtime days for each employee and let say if we have ten employees query return whole month for each employee either he have or overtime or not how can I implement this in report it becomes agony for me, anyone please suggest a solution.
Thanks and regards, Khawar.
---Query---
select o.ot_date , o.start_dt_time as start_time, o.end_dt_time as end_time, o.ot_details, et.holiday, et.staff_id, e.staff_name, e.desig
from overtime o, emp_ot et, employee e
where o.complain_no = et.complain_no
and o.inc_type_code = et.inc_type_code
and et.staff_id = e.staff_id
order by 1, 2, 3, e.staff_idHi Michael,
Thanks for reply, I think I didn't explain as I should, I want to print Overtime report for each employee let say employee A123 did overtime for five days in DEC than what I want is to print report for employee A123 for the whole month means when I print report blank cell should come where A123 don't have data (I mean other 25/26 days).
The structure of tables are as
SQL> desc overtime
Name Null? Type
COMPLAIN_NO NOT NULL NUMBER(5)
OT_DATE NOT NULL DATE
START_DT_TIME NOT NULL DATE
INC_REF_NO NUMBER(5)
END_DT_TIME NOT NULL DATE
INC_TYPE_CODE NOT NULL VARCHAR2(10)
DISTRICT_CODE VARCHAR2(6)
BUSBAR_VOL VARCHAR2(5)
OT_DETAILS VARCHAR2(2000)
SQL> desc EMP_OT
Name Null? Type
STAFF_ID NOT NULL VARCHAR2(8)
COMPLAIN_NO NOT NULL NUMBER(5)
INC_TYPE_CODE NOT NULL VARCHAR2(10)
HOLIDAY NUMBER
Each employee associated with primary key i.e COMPLAIN_NO and INC_TYPE_CODE
in each OVERTIME table record we may have more than one employee in EMP_OT table.
above detail may clear my query.
Thanks and Regards,
Khawar. -
I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
I want to use the sound card with LabView
Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.
Christi,
In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
Hope this helps
Roland -
There are 5 of us in this house with IPhones and we all want to control the apple tv with our phones. We all have separate iTunes accounts. How do we do this?
I have 3 iPhones in my house and 1 apple tv.
I do NOT set a password on my apple tv, so any iPhone can send video to the tv.
Any iPhone can use the apple remote option also.
Just play a video and click that square with an arrow and play on apple tv. The video comes up from any iPhone in my house.
Same goes for pics, etc -
Client wanted to delete the document created with the wrong GL with the WB
Dear All,
The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
We have tried to reverse it through a reversal posting. But it could not be done.
Client wanted to delete the document created with the wrong GL with the WBS element.
How this can be set right?
Please advice.
Regards
Bijudasdocument cannot be deleted in SAP
reverse the document and then report -
Client wanted to delete the document created with the wrong GL with the WBS
Dear All,
The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
We have tried to reverse it through a reversal posting. But it could not be done.
Client wanted to delete the document created with the wrong GL with the WBS element.
How this can be set right?
Please advice.
Regardsdocument cannot be deleted in SAP
reverse the document and then report -
i purchased gems from a game and didnt get them because my method was declined i want to remove the order so i dont pay for it and so i can update my other apps and i want to remove the method i will be thankfull if someone help me without updating the payment method i cant update my apps in my iphone i want to remove the method and remove the order i dont want it
Click here and ask the iTunes Store staff for assistance.
(125742) -
I want to use the Iphone 6 as an ipod for now, but i will evetually get a prepaid plan. So will buying the iphone 6 with t-obile contract free work?
Using an iPhone without a wireless service plan
-
I have a student Visa. I wanted to purchase the new macbook with retina display. Can i clam a VAT refund?
When I go to europe and head back to the states I can go to customs at their airport i.e france, italy or germany and get VAT refund for all the purchases I made. It does not work the other way around. purchase in the US heading back to europe as far as I know but you can ask US customs at the airport if they do such thing, just make sure you have copies of your receipts.
-
The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg
Hi,
I am getting bellow error when i am running my application. I am using JDeveloper 11.1.2.3
<Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<BC4JConfigLifeCycleCallBack> <contextInitialized> MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
oracle.mds.exception.MDSRuntimeException: MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
at oracle.mds.core.MetadataObject.getBean(MetadataObject.java:327)
at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:558)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:120)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:110)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:101)
at oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack.contextInitialized(BC4JConfigLifeCycleCallBack.java:114)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Nov 6, 2013 9:53:11 AM AST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reop
I seen oracle docs solution
MDS-01702: The method getBean() is not valid for metadata object {0} - it is allowed on only bean metadata objects.
Cause: An attempt was made to access the metadata object using the bean API but the metadata object was not a bean metadata object. The schema for the root element may not have been registered with MDS, or the beans were not available on the classpath.
Action: Regenerate the beans from the schema definitions and ensure that the correct versions are on the classpath. Check that the schemas are registered with the MDS instance.
Level: 1
Type: ERROR
Impact: Configuration
But i am not getting what i do in my application for removing this error.
MaroofDo you use MDS in your application?
It's possible that you see a leftover of an earlier deployment.
Do you get the same error if you only start the integrated server (application server navigator->integrated server->debug or run)?
IF you don't get it when you only start the server without running your application, the problem is somewhere in your app. If you get the error it's probably an old deployment or a configuration error of your server. In this case stop jdev, rename the DefaultDomain folder C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain tp C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\xxxDefaultDomain and start jdev again. Then use hte application server navigator to create a new integrated server (you should see this option as the DefaultDomain folder is not present) and once the new integrated server is created test again.
Timo -
Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems. -
Replace the following open/fetch/close statements with a cursor FOR loop
Hi anyone could you please help me,
I would like to replace the following open/fetch/close statements with a cursor FOR loop.
Codes are:
CREATE OR REPLACE PROCEDURE COMOES.orchid_shipment_interface IS
-- get the com shipment header records
CURSOR c_com_shphdr ( p_dwn_end_dt DATE ) IS
SELECT custno client_id
, plheadno plheadno
, DECODE(carr_no,'FEDX',lading_no,'UPS',lading_no,carrier_pro_no) tracking_no
, carr_no||'/'||carr_method carrier_id
, plantid plant_id
, carr_no
, lading_no
, del_custaddr ship_to_id
, ol_type cfm_order_type
, del_custno
, shipterm freight_terms
, del_custattn attn_line
, custaddr
FROM com_plhead@com_pricing.world
WHERE status = '9'
AND (mod_dat) > p_dwn_end_dt;
-- get the com shipment address records
CURSOR c_com_shpadr (p_custaddr VARCHAR2) IS
SELECT name1 addr_name
, street1 addr_line1
, street2 addr_line2
, city city
, state state_cd
, zip zip
, country country_cd
, phone work_phone
, email email1
FROM com_address@com_pricing.world
WHERE addr_id = p_custaddr;
-- get the com shipment detail records
CURSOR c_com_shpdtl ( p_plheadno NUMBER) IS
SELECT pll.plheadno pllheadno
, pll.pllineno ord_line_no
, pll.ol_no erp_line_no
, pll.ol_segno
, pll.fg_id sku
, pll.qty_shipped ship_qty
, pll.ordno erp_ord_no
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = p_plheadno
AND NOT EXISTS (SELECT '1'
FROM com_pkg_int_interface@com_pricing.world cpi
WHERE pll.ordno = cpi.ordno
AND pll.ol_no = cpi.ol_no);
-- type declaration
-- type declaration of com table.
TYPE t_com_shphdr IS TABLE OF c_com_shphdr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shphdr IS TABLE OF orchid_shipment_hdr_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpadr IS TABLE OF c_com_shpadr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpadr IS TABLE OF orchid_shipment_address_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpdtl IS TABLE OF c_com_shpdtl%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpdtl IS TABLE OF orchid_shipment_dtl_intf%ROWTYPE INDEX BY BINARY_INTEGER;
lv_company_code com_customer.business_unit%TYPE;
lv_erp_ord_no com_plline.ordno%TYPE;
lv_actual_ship_date com_plline.confirm_date%TYPE;
lv_po_no com_oline.po_no%TYPE;
lv_ord_date com_oline.entrydate%TYPE;
lv_hdr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_adr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_dtl_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_sku_desc com_salesitem.title%TYPE;
lv_ord_qty com_oldelseg.qty%TYPE;
lr_com_shphdr t_com_shphdr;
lr_orchid_shphdr t_orchid_shphdr;
lr_com_shpadr t_com_shpadr;
lr_orchid_shpadr t_orchid_shpadr;
lr_com_shpdtl t_com_shpdtl;
lr_orchid_shpdtl t_orchid_shpdtl;
-- variable declaration
ln_shphdr_seq NUMBER(10):= 0;
ln_shpadr_seg NUMBER(10):= 0;
ln_shpdtl_seq NUMBER(10):= 0;
cnt NUMBER(10):= 0;
cnt1 NUMBER(10):= 0;
ld_hdr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_hdr_dwn_status download_batch_info.dwn_status%TYPE;
ld_hdr_download_end_tstamp DATE;
ln_hdr_running_seq NUMBER(10) := 0;
ld_adr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_adr_dwn_status download_batch_info.dwn_status%TYPE;
ld_adr_download_end_tstamp DATE;
ln_adr_running_seg NUMBER(10) := 0;
ld_dtl_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_dtl_dwn_status download_batch_info.dwn_status%TYPE;
ld_dtl_download_end_tstamp DATE;
ln_dtl_running_seq NUMBER(10) := 0;
BEGIN
-- get the batch control number details from batch information table for shipment header
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_hdr_batch_ctrl_no
, ld_hdr_dwn_end_dt
, lc_hdr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment address
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_adr_batch_ctrl_no
, ld_adr_dwn_end_dt
, lc_adr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment details
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_dtl_batch_ctrl_no
, ld_dtl_dwn_end_dt
, lc_dtl_dwn_status
FROM download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- if previous run is not sucess then do nothing and return.
OPEN c_com_shphdr ( ld_hdr_dwn_end_dt ) ;
LOOP
-- delete the collection for every cycle
lr_com_shphdr.DELETE;
lr_orchid_shphdr.DELETE;
lr_com_shpadr.DELETE;
lr_orchid_shpadr.DELETE;
lr_com_shpdtl.DELETE;
lr_orchid_shpdtl.DELETE;
-- fetch the order header records to collection
FETCH c_com_shphdr BULK COLLECT INTO lr_com_shphdr LIMIT 500;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shphdr.COUNT = 0;
-- build your logic there to populate the data into order header collection.
FOR i IN 1..lr_com_shphdr.COUNT
LOOP
-- accumulate header running sequence number
ln_hdr_running_seq := ln_hdr_running_seq + 1;
ln_shphdr_seq := ln_hdr_running_seq;
-- Get the business unit for the customer from com_customer
BEGIN
SELECT business_unit
INTO lv_company_code
FROM com_customer@com_pricing.world
WHERE custno = lr_com_shphdr(i).del_custno;
EXCEPTION
WHEN OTHERS THEN
lv_company_code := NULL;
END;
-- Get the ordno, confirm_date from COM_PLLINE
BEGIN
SELECT ordno
, confirm_date
INTO lv_erp_ord_no
, lv_actual_ship_date
FROM com_plline@com_pricing.world cpl
WHERE cpl.plheadno = lr_com_shphdr(i).plheadno
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_erp_ord_no := NULL;
lv_actual_ship_date := NULL;
END;
-- Get the po_no, Entry_date from COM_OLINE
BEGIN
SELECT po_no
, entrydate
INTO lv_po_no
, lv_ord_date
FROM com_oline@com_pricing.world col
WHERE col.ordno = lv_erp_ord_no
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_po_no := NULL;
lv_ord_date := NULL;
END;
-- To assign the Bol Number from Lading Number
IF lr_com_shphdr(i).carr_no NOT IN ('FEDX','UPS') THEN
lr_orchid_shphdr(i).bol_no := lr_com_shphdr(i).lading_no;
ELSE
lr_orchid_shphdr(i).bol_no := NULL;
END IF;
-- For each order header get the Shipment Delivery Adderss
OPEN c_com_shpadr ( lr_com_shphdr(i).custaddr);
FETCH c_com_shpadr BULK COLLECT INTO lr_com_shpadr;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpadr.COUNT = 0;
-- biuld your logic here to populate the del address collection.
FOR j IN 1..lr_com_shpadr.COUNT
LOOP
-- accumulate the loop count into temp variable, so that will through tell each set of order header.
cnt := cnt + 1;
-- accumolate the header running sequence number.
ln_adr_running_seg := ln_adr_running_seg + 1;
ln_shpadr_seg := ln_adr_running_seg;
-- move the order address data into collection.
lr_orchid_shpadr(cnt).client_id := lr_com_shphdr(i).del_custno;
lr_orchid_shpadr(cnt).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpadr(cnt).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpadr(cnt).addr_name := lr_com_shpadr(j).addr_name;
lr_orchid_shpadr(cnt).attn_line := lr_com_shphdr(i).attn_line;
lr_orchid_shpadr(cnt).addr_line1 := lr_com_shpadr(j).addr_line1;
lr_orchid_shpadr(cnt).addr_line2 := lr_com_shpadr(j).addr_line2;
lr_orchid_shpadr(cnt).addr_line3 := NULL;
lr_orchid_shpadr(cnt).addr_line4 := NULL;
lr_orchid_shpadr(cnt).addr_line5 := NULL;
lr_orchid_shpadr(cnt).city := lr_com_shpadr(j).city;
lr_orchid_shpadr(cnt).state_cd := lr_com_shpadr(j).state_cd;
lr_orchid_shpadr(cnt).zip := lr_com_shpadr(j).zip;
lr_orchid_shpadr(cnt).zip_ext := NULL;
lr_orchid_shpadr(cnt).country_cd := lr_com_shpadr(j).country_cd;
lr_orchid_shpadr(cnt).tax_geo_cd := NULL;
lr_orchid_shpadr(cnt).work_phone := lr_com_shpadr(j).work_phone;
lr_orchid_shpadr(cnt).email1 := lr_com_shpadr(j).email1;
lr_orchid_shpadr(cnt).cre_dat := SYSDATE;
lr_orchid_shpadr(cnt).cre_usr := USER;
lr_orchid_shpadr(cnt).batch_ctrl_no := lv_adr_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpadr;
-- For each order header get the order detail/delivery segment data
OPEN c_com_shpdtl ( lr_com_shphdr(i).plheadno );
FETCH c_com_shpdtl BULK COLLECT INTO lr_com_shpdtl;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpdtl.COUNT = 0;
-- build your logic here to populate the order detail collection
FOR k IN 1..lr_com_shpdtl.COUNT
LOOP
-- accumulate the loop count into a temp variable, so that will through till each set of Order Header.
cnt1 := cnt1 + 1;
-- accumulate header running sequence number
ln_dtl_running_seq := ln_dtl_running_seq + 1;
ln_shpdtl_seq := ln_dtl_running_seq;
-- Get Quantity for the delvery from delevery segment table.
BEGIN
SELECT NVL(Qty,0)
INTO lv_ord_qty
FROM com_oldelseg@com_pricing.world cds
WHERE cds.ordno = lr_com_shpdtl(k).erp_ord_no
AND cds.ol_no = lr_com_shpdtl(k).erp_line_no
AND cds.ol_segno = lr_com_shpdtl(k).ol_segno;
EXCEPTION
WHEN OTHERS THEN
lv_ord_qty := NULL;
END;
-- Get Title for the salesitem from the salesitem table.
BEGIN
SELECT Title
INTO lv_sku_desc
FROM com_salesitem@com_pricing.world cs
WHERE cs.fg_id = lr_com_shpdtl(k).sku;
EXCEPTION
WHEN OTHERS THEN
lv_sku_desc := NULL;
END;
-- move the Order detail data into collection
lr_orchid_shpdtl(cnt1).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shpdtl(cnt1).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpdtl(cnt1).ord_line_no := lr_com_shpdtl(k).ord_line_no;
lr_orchid_shpdtl(cnt1).erp_line_no := lr_com_shpdtl(k).erp_line_no;
lr_orchid_shpdtl(cnt1).sku := lr_com_shpdtl(k).sku;
lr_orchid_shpdtl(cnt1).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpdtl(cnt1).container_no := NULL;
lr_orchid_shpdtl(cnt1).ord_qty := lv_ord_qty;
lr_orchid_shpdtl(cnt1).ship_qty := lr_com_shpdtl(k).ship_qty;
lr_orchid_shpdtl(cnt1).price_point := NULL;
lr_orchid_shpdtl(cnt1).pick_invoice_no := NULL;
lr_orchid_shpdtl(cnt1).cancel_qty := NULL;
lr_orchid_shpdtl(cnt1).bldg_id := NULL; --lr_com_shpdtl(k).bldg_id;
lr_orchid_shpdtl(cnt1).sku_company := NULL; --lr_com_shpdtl(k).sku_company;
lr_orchid_shpdtl(cnt1).sku_desc := lv_sku_desc;
lr_orchid_shpdtl(cnt1).icc_cd1 := NULL; --lr_com_shpdtl(k).icc_cd1;
lr_orchid_shpdtl(cnt1).erp_ord_no := lr_com_shpdtl(k).erp_ord_no;
lr_orchid_shpdtl(cnt1).cre_dat := SYSDATE;
lr_orchid_shpdtl(cnt1).cre_usr := USER;
lr_orchid_shpdtl(cnt1).batch_ctrl_no := lv_dtl_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpdtl;
-- build the logic to populate Order Header
lr_orchid_shphdr(i).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shphdr(i).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shphdr(i).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shphdr(i).container_no := NULL; -- container number is not maintained in COM
lr_orchid_shphdr(i).carrier_id := lr_com_shphdr(i).carrier_id;
lr_orchid_shphdr(i).plant_id := lr_com_shphdr(i).plant_id;
lr_orchid_shphdr(i).erp_ord_no := lv_erp_ord_no;
lr_orchid_shphdr(i).erp_ord_no2 := NULL;
lr_orchid_shphdr(i).po_no := lv_po_no;
lr_orchid_shphdr(i).ship_to_id := lr_com_shphdr(i).ship_to_id;
lr_orchid_shphdr(i).ship_to_addr_id := lr_com_shphdr(i).custaddr;
lr_orchid_shphdr(i).scac := NULL; --lr_com_shphdr(i).scac;
lr_orchid_shphdr(i).actual_ship_date := lv_actual_ship_date;
lr_orchid_shphdr(i).cfm_order_type := lr_com_shphdr(i).cfm_order_type;
lr_orchid_shphdr(i).company_code := lv_company_code;
lr_orchid_shphdr(i).no_of_order_lines := NULL; --lr_com_shphdr(i).no_of_order_lines;
lr_orchid_shphdr(i).pick_invoice_no := NULL;
lr_orchid_shphdr(i).ord_date := lv_ord_date;
lr_orchid_shphdr(i).orig_tender_date := NULL;
lr_orchid_shphdr(i).orig_delv_date := NULL;
lr_orchid_shphdr(i).delivery_flag := NULL;
lr_orchid_shphdr(i).delv_date_from := NULL;
lr_orchid_shphdr(i).delv_date_to := NULL;
lr_orchid_shphdr(i).orig_carr_cd := NULL;
lr_orchid_shphdr(i).routing_comment := NULL;
lr_orchid_shphdr(i).segment_type := NULL;
lr_orchid_shphdr(i).back_order_flag := NULL;
lr_orchid_shphdr(i).addr_override_flag := NULL;
lr_orchid_shphdr(i).fmx_assigned_carr := NULL;
lr_orchid_shphdr(i).fmx_assigned_ship_date := NULL;
lr_orchid_shphdr(i).fmx_assigned_delv_date := NULL;
lr_orchid_shphdr(i).freight_terms := lr_com_shphdr(i).freight_terms;
lr_orchid_shphdr(i).fmx_load_id := NULL;
lr_orchid_shphdr(i).asn_type := NULL;
lr_orchid_shphdr(i).icc_cd1 := NULL; --lr_com_shphdr(i).icc_cd1;
lr_orchid_shphdr(i).trans_type := NULL;
lr_orchid_shphdr(i).ref_no1 := NULL;
lr_orchid_shphdr(i).ref_no2 := NULL;
lr_orchid_shphdr(i).ref_no3 := NULL;
lr_orchid_shphdr(i).ref_no4 := NULL;
lr_orchid_shphdr(i).cre_dat := SYSDATE;
lr_orchid_shphdr(i).cre_usr := USER;
lr_orchid_shphdr(i).batch_ctrl_no := lv_hdr_batch_ctrl_no;
-- logic to get total boxes and weight.
BEGIN
SELECT SUM(no_cartons), SUM(weight)
INTO lr_orchid_shphdr(i).total_boxes
, lr_orchid_shphdr(i).weight
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = lr_com_shphdr(i).plheadno;
EXCEPTION
WHEN OTHERS THEN
lr_orchid_shphdr(i).total_boxes := NULL;
lr_orchid_shphdr(i).weight := NULL;
END;
END LOOP;
-- initialize the variables for next loop cycle.
cnt := 0;
cnt1 := 0;
-- populate the shipment header interface table.
FOR x IN 1..lr_orchid_shphdr.COUNT
LOOP
ld_hdr_download_end_tstamp := lr_orchid_shphdr(x).cre_dat;
INSERT INTO orchid_shipment_hdr_intf
(record_qualifier
,client_id
,ord_no
,tracking_no
,container_no
,bol_no
,carrier_id
,plant_id
,erp_ord_no
,erp_ord_no2
,po_no
,ship_to_id
,ship_to_addr_id
,scac
,actual_ship_date
,cfm_order_type
,company_code
,no_of_order_lines
,pick_invoice_no
,total_boxes
,weight
,ord_date
,orig_tender_date
,orig_delv_date
,delivery_flag
,delv_date_from
,delv_date_to
,orig_carr_cd
,routing_comment
,segment_type
,back_order_flag
,addr_override_flag
,fmx_assigned_carr
,fmx_assigned_ship_date
,fmx_assigned_delv_date
,freight_terms
,fmx_load_id
,asn_type
,upl_status
,icc_cd1
,trans_type
,ref_no1
,ref_no2
,ref_no3
,ref_no4
,cre_dat
,cre_usr
,batch_ctrl_no)
VALUES
( 10
,lr_orchid_shphdr(x).client_id
,lr_orchid_shphdr(x).ord_no
,lr_orchid_shphdr(x).tracking_no
,lr_orchid_shphdr(x).container_no
,lr_orchid_shphdr(x).bol_no
,lr_orchid_shphdr(x).carrier_id
,lr_orchid_shphdr(x).plant_id
,lr_orchid_shphdr(x).erp_ord_no
,lr_orchid_shphdr(x).erp_ord_no2
,lr_orchid_shphdr(x).po_no
,lr_orchid_shphdr(x).ship_to_id
,lr_orchid_shphdr(x).ship_to_addr_id
,lr_orchid_shphdr(x).scac
,lr_orchid_shphdr(x).actual_ship_date
,lr_orchid_shphdr(x).cfm_order_type
,lr_orchid_shphdr(x).company_code
,lr_orchid_shphdr(x).no_of_order_lines
,lr_orchid_shphdr(x).pick_invoice_no
,lr_orchid_shphdr(x).total_boxes
,lr_orchid_shphdr(x).weight
,lr_orchid_shphdr(x).ord_date
,lr_orchid_shphdr(x).orig_tender_date
,lr_orchid_shphdr(x).orig_delv_date
,lr_orchid_shphdr(x).delivery_flag
,lr_orchid_shphdr(x).delv_date_from
,lr_orchid_shphdr(x).delv_date_to
,lr_orchid_shphdr(x).orig_carr_cd
,lr_orchid_shphdr(x).routing_comment
,lr_orchid_shphdr(x).segment_type
,lr_orchid_shphdr(x).back_order_flag
,lr_orchid_shphdr(x).addr_override_flag
,lr_orchid_shphdr(x).fmx_assigned_carr
,lr_orchid_shphdr(x).fmx_assigned_ship_date
,lr_orchid_shphdr(x).fmx_assigned_delv_date
,lr_orchid_shphdr(x).freight_terms
,lr_orchid_shphdr(x).fmx_load_id
,lr_orchid_shphdr(x).asn_type
,00
,lr_orchid_shphdr(x).icc_cd1
,lr_orchid_shphdr(x).trans_type
,lr_orchid_shphdr(x).ref_no1
,lr_orchid_shphdr(x).ref_no2
,lr_orchid_shphdr(x).ref_no3
,lr_orchid_shphdr(x).ref_no4
,lr_orchid_shphdr(x).cre_dat
,lr_orchid_shphdr(x).cre_usr
,lr_orchid_shphdr(x).batch_ctrl_no);
END LOOP;
-- populate the shipment address interface table.
FOR y IN 1..lr_orchid_shpadr.COUNT
LOOP
ld_adr_download_end_tstamp := lr_orchid_shpadr(y).cre_dat;
INSERT INTO orchid_shipment_address_intf
( record_qualifier
, client_id
, ord_no
, tracking_no
, addr_name
, attn_line
, addr_line1
, addr_line2
, addr_line3
, addr_line4
, addr_line5
, city
, state_cd
, zip
, zip_ext
, country_cd
, tax_geo_cd
, work_phone
, email1
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 14
, lr_orchid_shpadr(y).client_id
, lr_orchid_shpadr(y).ord_no
, lr_orchid_shpadr(y).tracking_no
, lr_orchid_shpadr(y).addr_name
, lr_orchid_shpadr(y).attn_line
, lr_orchid_shpadr(y).addr_line1
, lr_orchid_shpadr(y).addr_line2
, lr_orchid_shpadr(y).addr_line3
, lr_orchid_shpadr(y).addr_line4
, lr_orchid_shpadr(y).addr_line5
, lr_orchid_shpadr(y).city
, lr_orchid_shpadr(y).state_cd
, lr_orchid_shpadr(y).zip
, lr_orchid_shpadr(y).zip_ext
, lr_orchid_shpadr(y).country_cd
, lr_orchid_shpadr(y).tax_geo_cd
, lr_orchid_shpadr(y).work_phone
, lr_orchid_shpadr(y).email1
, lr_orchid_shpadr(y).cre_dat
, lr_orchid_shpadr(y).cre_usr
, lr_orchid_shpadr(y).batch_ctrl_no);
END LOOP;
-- populate the shipment detail interface table.
FOR z IN 1..lr_orchid_shpdtl.COUNT
LOOP
ld_dtl_download_end_tstamp := lr_orchid_shpdtl(z).cre_dat;
INSERT INTO orchid_shipment_dtl_intf
( record_qualifier
, client_id
, ord_no
, ord_line_no
, erp_line_no
, sku
, tracking_no
, container_no
, ord_qty
, ship_qty
, price_point
, pick_invoice_no
, cancel_qty
, bldg_id
, sku_company
, sku_desc
, icc_cd1
, erp_ord_no
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 20
, lr_orchid_shpdtl(z).client_id
, lr_orchid_shpdtl(z).ord_no
, lr_orchid_shpdtl(z).ord_line_no
, lr_orchid_shpdtl(z).erp_line_no
, lr_orchid_shpdtl(z).sku
, lr_orchid_shpdtl(z).tracking_no
, lr_orchid_shpdtl(z).container_no
, lr_orchid_shpdtl(z).ord_qty
, lr_orchid_shpdtl(z).ship_qty
, lr_orchid_shpdtl(z).price_point
, lr_orchid_shpdtl(z).pick_invoice_no
, lr_orchid_shpdtl(z).cancel_qty
, lr_orchid_shpdtl(z).bldg_id
, lr_orchid_shpdtl(z).sku_company
, lr_orchid_shpdtl(z).sku_desc
, lr_orchid_shpdtl(z).icc_cd1
, lr_orchid_shpdtl(z).erp_ord_no
, lr_orchid_shpdtl(z).cre_dat
, lr_orchid_shpdtl(z).cre_usr
, lr_orchid_shpdtl(z).batch_ctrl_no);
END LOOP;
COMMIT;
END LOOP;
CLOSE c_com_shphdr;
-- set the status to success
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plhead_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_address_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plline_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_dtl_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
-- Update the download status to success in the interface table.
-- Shipment Header
COMMIT;
EXCEPTION
WHEN OTHERS THEN
-- load is not sucess then set the status to fail
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Following error occured while executing ORCHID_SHIPMENT_INTF procedure...!!!'||SQLERRM);
RAISE;
END orchid_shipment_interface;Edited by: BluShadow on 03-Aug-2011 13:28
added {noformat}{noformat} tags. Please read {message:id=9360002} to learn to do this yourself. &nbPlease read the Forum FAQ on how to ask a question, particularly how to format code
SQL and PL/SQL FAQ
SQL and PL/SQL FAQ
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html -
Hi All,
When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online. Do you still want to import the songs?" This has happened for four CD's in a row now. Today, after importing some other CD's in the regular way, all of a sudden, iTunes won't recognize the Eagles - "Hotel California" CD, the Eagles "**** Freezes Over" CD, "The Best of Roy Orbison" or "Milestones" by Miles Davis.
What happened? Anybody know?We've gotten the same error at the same time. I guess we need to let this play out. In the meantime, I'm gonna update iTunes.
Maybe you are looking for
-
Can not install salt 12.1.1.0 on redhat 6.4
Hi ! I have redhat 6.4 and try to install tuxedo 12.1.1.0 + salt 12.1.1.0. I have tuxedo installed successful. when I try to install salt, it faild like this: [hanql@redhat64 ~]$ ./salt12110_64_linux_5_86.bin -i console Preparing to install... Extra
-
HT2589 Is there anyway to delete an old apple id
Ii purchase 2 songs from I tunes yesterday on my phone for some reasons when I hooked my phone to my MacBook and i pad to download the new songs I was charged 3 times for each apple product I have that never happened before I did change my apple id
-
I would like to cancel my icloud. I am within the 15days trial
I recently bought icloud storage on my iPhone but I realize that I do not really need it so I would like my money back. I am within the 15 day trial period. I really appreciate trying it out. Thank you for your time and help. lg2
-
Re: Need Help With Helpdesk w/ Multiple Sites
We thought about this, but we want one central website for all the end-users to go to. Is there any way to then (depending on what location the user sets on their ticket) to send to one of these Spiceworks sub-sites? I was thinking about make a rule
-
Installing Windows XP on MacBook
I bought a new MacBook just after they were introduced. One of the main incentives to me was that I could, if I so chose, install the Windows XP operating system. I don't need this OS except in two critical areas: My scuba dive computer data can be d