I want to restore my phone by connecting my Iphone4 to iTunes in Mac but it doesn't show phone device. What should i do now??????
I have problem when I updated iOS7 yesterday. At first, there was a message popped out in my Iphone 4 said "iOS7 available for u to update, then i clicked "update", then it said "wait while it verifying", after that my phone tuned blank and what i saw was only the "logo of apple". Until now i see only that Apple logo, i can't either switch my phone on or off.
My iTunes in Mac is just updated to version 11.1
I want to restore my phone by connecting my Iphone4 to iTunes in Mac but it doesn't show phone device.
I don't know why it doesnt connect to pc(Mac pro).
Any solution?
You need to restart the phone in DFU mode and update the software.
To restart the phone in DFU mode press the power and home button simultaneously for like 10 seconds once the phone is switched off release the power button keep holding the home button while you connect to the computer which has Itunes running and then you can restore or update the software, you can download the update and connect after the software has been downloaded if your phone disconnects, And enjoy you new IOS7.
Similar Messages
-
Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??
The USB drive must be formatted for Mac in Mac OS Extended (Journaled), or if you want to use both Mac and Windows files, the drive can be formatted in FAT32.
A number of drives are formatted for Windows only in a format called NTFS. This willl not work on the Time Capsule.
In addition, the USB port on the Time Capsule is under powered. You almost always have to use a powered USB hub when you connect a drive to the Time Capsule...even if the drive has its own power supply. -
I need to connect my bluetooth keyboard on my mac, but it doesn't have bluetooth installed
I need to connect my bluetooth keyboard on my mac, but it doesn't have bluetooth installed. eMac 2004 running 10.4.7 Tiger.
In the case you have explained you will have to do some shopping around. I am sure there is something out there that is available and will work with a Mac. The key here though is it must have the software available with the Keyboard or Mouse to insure that it will work on your older model Mac. Normally all you need to do is follow there instructions to a tee to make them work. I have 2 different items that work trouble free on 2 different Mac's. One other thing to keep in mind is you may have some trouble tracking down what you are looking for.
Here may very well be a place to start.
https://www.macsales.com/
CHEERS
AND GOOD LUCK ON YOUR QUEST.
DON -
I'd like to buy something from Appstore. I click for example "Free" and I'm waiting for window with Apple ID or something but nothing happens. What should I do with that?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
NOTE:
You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE -
i got my new iPhone 5 and i connected it to my iTunes on mac and it ask me if i want to setup as new iPhone or restore backup and i restore back up but now i want to delete backup and set up as new iPhone, is the anyhow?
The iCloud backup includes most things except non-iTunes purchased but the iTunes backup does not include those either. For what iCloud includes see:
iCloud: iCloud storage and backup overview -
My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
my phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???
PLEASE HELP!!!Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
everytime i want to restore my previews backup to my new iphone, itunes asks for my password, when i enter my password it tells me my password is incorrect, but its not! i have even changed my password. but still nothing! I get the same error from itunes!!!!
Try using your computer password. I tried any password I could think of relating to my phones, but it was none of them; it was, in fact, my computer password.
-
When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?
If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only. -
My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?
This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software) -
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone
Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.
-
my phone has locked after updating , what should i do now to unlock ? now i don't live in usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .
The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
Buy a new phone. -
I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??
I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??
-
when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this message?
Apple has shutdown MobileMe. You have to switch over to iCloud.
Maybe you are looking for
-
Limiting rotation of Transform to one axis at a time.
I have a situation where I want to force a transform returned from a picking tool to only rotate around or translate along a single axis. To do this, I'm using the transformChanged() function shown below. It works fine for the translation changes, bu
-
Hello everyone, we have just bought a USRP-2932, and on the first run I get this error: Error -1074118627 occurred at niUSRP Initiate.vi Possible reason(s): A runtime or configuration error occurred. Code: 2410 Details: LookupError: Path not found in
-
Tcode CS02 changed triggers idoc but not CS21 using BD21
Hi when bom is changed using CS02 then when using BD21 triggers IDOC for the message type but when bom is changed using CS21 then it does not trigger idoc using BD21 I checked the code for BD21 message type function I found that change pointer (bdcp2
-
Transferring entire music/video library from apple t.v. to new computer
My old computer died and everything got erased but luckily everything is saved on my apple t.v. is there any way to transfer everything on my apple t.v. to my new laptop that runs on vista? help is greatly appreciated.
-
Can't type apostrophes on Photoshop CS4
I have a problem when using Photoshop CS4 on a MAC where when I type an apostrophe or single quotation mark it comes out as an i with an acute accent above it. When typed not next to a letter it comes out as e with dotted accent about it. This doesn'