I want to run an NI GPIB card and a Keithly GPIB in the same machine.

I want to run a NI GPIB and a Keithly in the same machine for software development. Our labs use both types of card. Another employee tried to make it happen, but failed. I would like to use 1 machine due to software licensing issues.

Hi,
There shouldn't be any interaction between the two GPIB drivers. The NI interfaces will use NI-488.2, wil the Keithley interfaces will use their low-level device driver. Each driver will manage the their own hardware.
In LabVIEW, you will use the NI-488.2 Vis to communicate with the NI interface. The Keithley driver has to install their own driver interface VIs.
The only problem is you want to use VISA for both interfaces. I don't know if there is a Keithley implementation of VISA, but there can nly be one installed in the system. The NI_VISA driver will allow you to control the NI interface, but not the Keithley interface. You can still use the Keithley interface using the low-level driver.
Finally, here is a knowledge base I found that has
some information that may be useful to you Using a Keithley PC488 GPIB Interface with LabVIEW
Hope this helps.
DiegoF
National Instruments.

Similar Messages

  • Can I run 64 bit LabVIEW and 32 bit LabVIEW on the same machine?

    If I have a 64 bit OS (Windows 7 64 bit or Server 2008 64 bit) can I install and run 32 and 64 bit LabVIEW on the same machine?
    John

    LabVIEW 64-Bit vs. 32-Bit Applications FAQ
    Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
    A. Yes.
    The FAQ will likely answer other questions you have regarding the restrictions and issues you will have with having both versions and compiling in one vs the other.

  • I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

    I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

    Hi BelleDesign,
    "Headers" is short for "Continuing Headers."
    Use a Header when you want recurring information on a series of pages in your document.
    If ii, iii, etc. are page numbers, you can place them in Headers using Insert > Page Number, then formatting the page number to lower case Roman numerals.
    For more on Headers and Footers, see Chapter 3, Working with document parts in the Pages '09 User Guide, available for download via the Help menu in Pages. Discussion of Headers and Footers starts on Page 54.
    Regards,
    Barry

  • My WLan card and my Bluetooth have both the same MAC address?

    Hello dear Arch Forumers.
    I've recently purchased a brand new Sony VAIO SVF 14415. I installed Arch in Legacy BIOS mode (I didn't want to deal with the UEFI stuff and I don't use windows anyway, so I erased the complete disk and started from scratch) successfully without any glitches except for the wifi card (broadcom device) and the bluetooth device. For the wireless connection I installed the Broadcom-wl driver from AUR and worked fine, then I went after the bluetooth integration (I'm using KDE). I installed every package in the official repositories to make it work, I also enabled the systemd service for bluetooth management but no luck to get it to work...
    Then I tried with CLI tools to see if I could diagnose the problem and I noticed that both my bluetooth and wireless device have the same MAC address (see the image below).
    Even though I found something I still don't have a clue about how to proceed to make the bluetooth work. Can someone help me?
    Kind Regards!
    EDIT: I'm sorry, I just realized the last character is different in both mac addresses but the bluetooth still doesn't work.
    Last edited by Silex89 (2014-01-21 20:01:29)

    If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.

  • Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

    Hi,
    I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
    Thank you,
    Martin Giffy D'Souza
    [http://apex-smb.blogspot.com/]

    I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
    I can't remember if I used different ports or same port.

  • Can you run Logic Pro 8 and Logic Pro X on the same machine?

    Hello all!
    Congratulations to us on the release of the new Logic Pro!
    I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!).  I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
    As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
    I am planning my Logic Pro and Mac OS migrations!  Thanks!!

    Try here:
    https://discussions.apple.com/community/professional_applications/logic_pro
    This forum is FCP X.
    Al

  • How to install & run FF 3.6.3 and 3.0.19 at the same time?

    I would like to run simultaneous FF 3.0.19 and the latest version because of extensions that don't work on the new version.
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100317 SeaMonkey/2.0.4

    Did you do a search on the add-ons page to see if there are replacement extensions with similar features?
    You can also look at the portable version: http://portableapps.com/apps/internet/browsers/portable_firefox

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    If you're positive the information is correct, ask the issuing bank why the transaction is being rejected.
    You're getting this error because the store can not authorize the card with your bank.

  • Labview runs CANBus and DNP3 software model at the same time

    I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
    As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
    Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
    I proposed two possible ways to conduct communication, bt not sure if it is possible.
    1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
    2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
    The diagram of the communication system is shown in the attachments.
    Attachments:
    Commnucation system diagram.pdf ‏118 KB

    To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
    IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
    To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
    ¿Do you see a trend developing here?

  • How to run two instances of weblogic server as an NT service on the same machine

    I have to have two instances, one I want to use it for development(testing
    purposes) and the other one I need to use it as a live one(Production)
    So that I can test my applications independently without disturbing the live
    application.
    Thanks
    Madhu

    I can start one instance as an NT service, but the other instance, I have to
    start with the command. I need to run as an NT service because I need to
    use NTRealm
    Security
    I have created a new domain , server listening to different port.
    Thanks
    madhu
    Bruce Blackshaw <[email protected]> wrote in message
    news:[email protected]..
    "m holur" <[email protected]> wrote in message
    news:<3c0d2b66$[email protected]>...
    I have to have two instances, one I want to use it fordevelopment(testing
    purposes) and the other one I need to use it as a live one(Production)
    So that I can test my applications independently without disturbing thelive
    application.I would not recommend having development and production on the same
    machine.
    But if you wish to do so, you can create multiple domains under the
    same installation, say one for dev and one for prod. On the same
    machine make sure they listen on different ports. This, of course,
    ties you to the same version for development and production - making
    it impossible to upgrade just one.
    You may be able to do two completely different installations (i.e.
    different BEA HOMEs) on the same machine - I haven't tried this but it
    looks possible. This would mean you could upgrade each separately. The
    presence of BEAHOMELIST in the registry on NT seems to indicate this
    should work.
    Bruce Blackshaw
    Free Java FTP Library
    http://www.enterprisedt.com/downloads/ftp.html

  • How to run 2 weblogic instance in the same machine

    is it possible to run 2 weblogic instance in the same machine ?
    I have created 2 domains ...domain-1 and domain-2 in my hard disk and both of them have startWeblogic.cmd in them..
    but i cant run them simultaneously though individually they run.
    they differ by HTTP port and Debug port but still they dont run simultaneously
    can you please comment ?

    yea...i thought about it .
    but as both of them are same application and they are using the same DB connection pool , JMS queue ....i just dont want to mix all these.
    so i have created two seperate domian . and i run them individually and they work fine.
    However , they are having different ports though .
    But when i run the second one while the first one is running ....the second one does not starts up
    here is the error when i click on startsWeblogic.cmd when the other is already running.
    java version "1.4.2_08"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
    BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 (build ari-49095-20050826-1856-win-ia32, Native Threads, GC strategy: pa
    Starting WLS with line:
    d:\bea\JROCKI~1\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.
    === Debugging ===
    This window is necessary for debugging code using WebLogic Workshop
    ERROR: Proxy already running...
    weblogic.debugging.comm.TransportException
    at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
    at weblogic.debugging.engine.ProxyThread.run()V(ProxyThread.java:77)
    at java.lang.Thread.run()V(Unknown Source)
    at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
    Caused by: java.net.BindException: Address in use
    at jrockit.net.SocketNativeIO.bind(ILjava/net/InetAddress;I)I(Unknown Source)
    at jrockit.net.SocketNativeIO.bind(Ljava/io/FileDescriptor;Ljava/net/InetAddress;I)I(Unknown Source)
    at java.net.AbstractSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
    at java.net.PlainSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
    at java.net.ServerSocket.bind(Ljava/net/SocketAddress;I)V(ServerSocket.java:318)
    at java.net.ServerSocket.<init>(IILjava/net/InetAddress;)V(ServerSocket.java:185)
    at java.net.ServerSocket.<init>(I)V(ServerSocket.java:97)
    at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
    ... 3 more
    Could not bind to Weblogic server (Error attaching to Weblogic Server.).
    Message was edited by:
    Unknown_Citizen

  • TS1292 What is iTunes Gigt Card and how i can find the code

    Dear Team,
    I just started use Iphone4, I have problem during redeem, i want to understand more what is iTuned gift Card and how i can find the cord

    Look on the back of the card.  You may have to scratch off.

  • Can you run 3G and connect to wifi at the same time?

    Is it possible to use the iPhone 5 to search 3G and connect to wifi at the same time? I'm trying to run my Apple TV but only have 3G that is run through my phone. I want to play Netflix using Apple TV run from 3G through my phone.

    The phone and the ATV need to be on the same wireless network.  You cannot communicate with the ATV using 3G on the phone

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

Maybe you are looking for

  • Runtime error while Forthnightly utilisation of CENVAT J2IU

    Hi All, When i am executing T.code J2IU i am getting following runtime error Runtime Errors         PERFORM_CONFLICT_UC_STRUCT Except.                    CX_SY_DYN_CALL_ILLEGAL_TYPE Date and Time          16.02.2009 15:18:35 Short text      Structure

  • Forcing user to enter values at table level

    Hi, I have created a table ztest. How to force user to enter the values for certain fields in the table which are not keys, similar to not null in RDBMS. selecting the initial values filed in SE11 populates with some default value, but it doesnt forc

  • Why FileUtils::CopyFile doesn't work with blank space?

    Hi all, If I have a destination directory with blank space inside, looks like: "C:\Users\Pattrick James\Documents" for Windows or "Macintosh HD:Users:Pattrick James:Documents" for Mac. Then I want to copy a file to that directory, use FileUtils::Copy

  • Website not displaying correctly when uploaded to internet

    Hi there, I've created shadows on one of my websites using gradients and aligning them with boxes to create the background to parts of the website.  It displays fine in Muse, but when I upload it, it's not aligned.  Here is the website:  http://www.h

  • Oracle 8i, propagation problem with Advanced Active Queues

    In our application we use Advanced Active Queuing to exchange data between servers. The job responsable for the propagation of the messages to another server suddenly stops without obvious reason ?! We already tried to modify the processes parameter