I want to trigger samples or tracks in GB 08 with a midi foot controller

I am trying to utilize my macbook with GB08 to keep my investment low for mow. I am thinking of purchasing a midi foot controller like the Roland FC300 or the Behringer FCB1010 to trigger playing of tracks during a live performance. These sounds that I want to trigger are mostly keyboard/synth/horn parts.
How can I do this? I know I will need to also purchase a midi to usb interface. Is this possible?
Our guitar player has cubase that we could load onto the macbook. Will this work better?
Please help me out here. Looking to fill out our sound - Classic rock cover band - bass,guitar, drums, & a singer. We have given up on finding a decent & reliable key player.
Thanks!
Honz

Hello.
I don't have Amplitude. But with NI GuitarRig I do like this:
1. Select an AUDIO track. Set the input of the track to match the incoming (clean) signal from your guitar.
Set an appropriate recording level on your audio interface (Like -10 to -6 db on the peaks).
Turn down the volume on the AUDIO track.
2. Select an AUDIO INSTRUMENT track. In the instrument pop-up-menu select "AU Midi controlled FX", and then select Guitar RIg2 MFX (Hopefully you will find Amplitude here).
3. Read the manual and learn how to route midi from your "Ground Control MIDI foot controller" to the Amplitude Plug-in.
4. Near the top on your Plug-in window you will find the Side Chain Button. Press, Hold and select the input of incoming signal from your guitar. (The same input as in step 1).
You should now hear you guitar playing thru your plug-in and you should be able to midi-control whatever you want.
To make a recording:
5. Let the AUDIO INSTRUMENT track remain selected. SHIFT-Click the rec-button on the AUDIO track (I have to click twice to get both the channel and the button selected).
6. Record (and don't forget to use your midi controler).
7. You will now have an audio recording with your clean guitar signal on the AUDIO track + a recording with the mididata on the AUDIO INSTRUMENT track.
To hear the recording:
8. Go to your Plug-in window Side Chain Button. Change the input to match the track where you just recorded the clean guitar signal.
9. Listen and Enjoy
10. Please tell me there is an easier way to do this.
Good Luck,
Orjan
Imac 17", 1,9 Ghz   Mac OS X (10.4.8)   1,5 GB RAM, 250 GB HD, Logic Pro 7.1.1

Similar Messages

  • How can I acquire and record pre trigger samples

    Hi I would like to acquire and record pre trigger samples. I have used many different methods including: 
    http://digital.ni.com/public.nsf/allkb/9DE9E3E4DAD​9EE93862579C60018B6EA
    the problem is I would like to acquire pre trigger samples before start trigger not reference trigger. I think reference trigger is used for stop triggering not start triggering. Could you please help me on this
    Thanks? 

    Hi tintin_99,
    I hope you are well and thank you for posting your issues to the forum. 
    I wanted to ask you some further information in regards to your application:
    - What version of LabVIEW do you have?
    - What operating system (OS) are you running on your PC/laptop?
    - Which application programming interface (API) are you using? NI-DAQmx, NI-Scope?
    When you mention you want to acquire the pre-trigger samples before the start trigger and not the reference trigger, how are you currently doing this? Would you be able to post up your code so that everyone can have a look at it?
    Here are some further links to look at:
    - Continous Analog Input Acquisition with Pre-trigger Scans using 2 E-series Boards
    - How Can I Acquire Pretrigger Samples with NI-SCOPE?
    - Software Analog Trigger with Pre-Trigger Samples
    - Synchronized Analog Input/Ouput with an Analog Trigger and Pre-Triggered Samples
    I hope this is alright for now.
    Kind Regards,
    Dom C

  • Track a Line String with a Trigger

    Hi,
    (sorry for my bad english)
    I need to know if i can track a Line String with a trigger. For example, in my case, i've to colums called "COORDINATEPARTENZA" and "COORDINATEARRIVO". From contains a CONTROID() coordinates, anche TO contains CENTROID() coordinates. Now, can i track a line in a colums "LINE" with a trigger? All in automatic?
    There is a method to take the coordinates from "COORDINATEPARTENZA" and "COORDINATEARRIVO" and track an automatic stringline with a trigger?
    This is the code:
    This is the Trigger:
    CREATE OR REPLACE TRIGGER "TRIGGERPERCORSO"
    BEFORE INSERT OR UPDATE OF luo_nomeluogo ON "SPOSTAMENTI"
    FOR EACH ROW
    DECLARE
    partenza VISUALPERCORSO.coordinatepartenza%TYPE;
    arrivo VISUALPERCORSO.coordinatearrivo%TYPE;
    vecchioluogo LUOGHI.nomeluogo%TYPE;
    nuovocodicespostamento SPOSTAMENTI.codicespostamento%TYPE;
    presenza NUMERIC;
    BEGIN
    SELECT COUNT(*) INTO presenza
    FROM spostamenti
    WHERE ope_codiceopera = :new.ope_codiceopera;
    IF (presenza >= 1) then
    SELECT luo_nomeluogo INTO vecchioluogo
    FROM (SELECT * FROM spostamenti
    WHERE ope_codiceopera = :new.ope_codiceopera
    ORDER BY codicespostamento DESC)
    WHERE ROWNUM <2;
    SELECT SDO_GEOM.SDO_CENTROID (c.COLLOCAZIONE, m.diminfo) INTO partenza
    FROM LUOGHI c, user_sdo_geom_metadata m
    WHERE m.table_name = 'LUOGHI' AND m.column_name = 'COLLOCAZIONE' AND c.nomeluogo = vecchioluogo;
    SELECT SDO_GEOM.SDO_CENTROID (d.COLLOCAZIONE, n.diminfo) INTO arrivo
    FROM LUOGHI d, user_sdo_geom_metadata n
    WHERE n.table_name = 'LUOGHI' AND n.column_name = 'COLLOCAZIONE' AND d.nomeluogo = :new.luo_nomeluogo;
    INSERT INTO VISUALPERCORSO(LUOGOPARTENZA, OPE_CODICEOPERA, COORDINATEPARTENZA, LUOGOARRIVO, COORDINATEARRIVO) VALUES (vecchioluogo, :new.ope_codiceopera, partenza, :new.luo_nomeluogo, arrivo);
    END IF;
    END;
    So, now i need to track a line (with oracle spatial) from "COORDINATEPARTENZA" to "COORDINATE ARRIVO". With another trigger.
    Thanks a lot (sorry for my bad english).

    "COORDINATEPARTENZA" and "COORDINATEARRIVO" are points, correct?
    If I understand, you need to create a line from initial point (PARTENZA) to final point (ARRIVO) in a trigger.
    Yes, you can do it.
    Anyway, you can write to me in italian (miguel dot fornari at gmail).

  • I am using quicktime player and i want to add a music track can anyone help me please

    I want to add a music track to my quicktime movie any help out there

    HI sjr64,
    I would suggest that you use iMovie or a similar video editing program to add a music track to your video:
    iMovie (2013): Add audio and music
    http://support.apple.com/kb/PH14708
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

    I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

    Ah that was it, thanks a lot common sense really but thanks for the help

  • Want to trigger the workflow from MIGO

    Hi Experts,
          I want to trigger the workflow from MIGO transaction and should handle the created material document number (i.e. I am doing the goods receipt for the process order, when he post it, the material document details (material doc number) should be mailed immediately when it is created). Please give me the suggestions for the same.
    Thanks & Regards,
    Ravi.

    Dear Ravi,
    Please refer this link [Trigger workflow from MIGO tcode|Trigger workflow in MIGO Tcode;.
    KR,
    Bharath

  • I want to bulk purchase single tracks, how do i go about this without buying and paying each time

    I want to bulk purchase single tracks for my ipod, how do i go about this without buying and paying each time, can i not amass a number of tracks and then go to checkout. It seems to want to charge me each time. Help!

    Put them in your wishlist

  • Where can I find the sample Issue Tracker application?

    Where can I find the sample Issue tracker application?
    Regards.

    Hi Maxim
    Your version is for HTMLDB 1.5.
    I found a (little bit) newer version for htmldb 1.6: http://htmldb.oracle.com/pls/otn/f?p=18326:7:14841698881447966533::::P7_ID:1184
    But I don't testet it.
    Greetings
    Sven

  • Unable to import sample Usage Tracking RPD objects

    Hi guys,
    OBIEE version 10.1.3.3.0. We are trying to import the objects that come in the sample Usage Tracking RPD (OracleBI/server/Sample/usagetracking/UsageTracking.rpd) into our own RPD. We have been able to create the S_NQ_ACCT table which is working fine and the BI Server populates with user activity in our Oracle DB. We also created and populated the NQ_LOGIN_GROUP, S_ETL_DAY and S_ETL_TIME_DAY tables from the scripts provided in OracleBI/server/Sample/usagetracking/SQL_Server_Time/. I added all the objects to the Physical Layer and updated row counts with no problems. I am now trying to import the objects into the Business Layer in the Admin Tool. When I try to copy/paste the Measures object from the sample RPD I get the following error:
    [nQSError: 28006] Near Line 904, <"join nQ_CALENDAR Year Ago NQSACCT">: Not defined.
    I am doing the following replacement:
    "OBI Usage Tracking"."Catalog"."dbo"
    for
    "Usage Tracking".""."MIOBIEE_O"
    Which covers the different DB setup in my RPD. What else am I missing?

    I didn't copy paste the objects from one repository to the other, but I imported the UsageTracking.rpd into our main repository, by clicking on File, Import -> from Repository.
    Before you do this, you must make this option available. Under Tools, Options and tab General, you must check the "Allow import from repository" option.
    Then you should check the database settings in the connection pool, for instance the call interface, this can be OCI instead of ODBC.
    Regards,
    Stijn

  • I want to share my GB track with friends. I have "shared" it with iTunes, then what do I do?

    I don't know how to get my GB track to my friends, some of whom will have macs and some pcs. I have "shared" it with iTunes, but then what do I do? I know I can burn it to a cd, but I just want to send them the file. I've been told I can make it a podcast and post it on my Facebook page, but I don't know how to do this either! Basically, I want to be able to send a link to the track so that foks with either macs or pcs can listen to it. Thanks!

    What is your GarageBand version?
    In GarageBand '11 you have the option "Share > Send Podcast to iWeb". You will have to use the software you are using to create webpages to link to that file.
    In GarageBand 10.0 you can use the option "Share > SoundCloud".
    If you only want a place to put the song for download, get yourself a Dropbox, see:  Download Dropbox for Mac OS
    In GarageBand, use "Export Song to Disk".
    Then put the song into the "public" folder in your dropbox and send the link to your friends.

  • I want to create a backing track in GB '09--how to change chords?

    I want to create a backing track for a song I've written.   I want to use all software instruments--drums, bass, strings, guitar. (It's akin to a disco/Philadelphia sound fmor the early/mid-70s.)  The idea is that this will be playing over a sound system while I sing the song live in a performance.
    I have figured out how to use the instrument loops as well as establish the key and the tempo.   At this point, though, I don't know how to get the guitar/bass/strings to change the chords.   For example, I start in Bb minor for two measures, then got to F7 for two measures, back to Bb minor for two measures, and then A diminished for two measures.  Can anyone give me guidance as to how to plunk in these chords?   Thanks.

    At this point, though, I don't know how to get the guitar/bass/strings to change the chords.
    A basic chord progression can be done by transposing a copy of the loop using "pitch" slider in the Track Editor. For example, setting the Pitch slider to "-3" will transpose the selected loop down three half note steps. To go from Bb to F set the slider to "-5". The loop browser can beset to show only major or minor chords in the "Scale" pop-up menu.
    Only, to add a seventh or to make a chord "diminished", transposition alone will not suffice. In this case it is best to use software instrument loops, where you can shift the individual notes in the Track Editor or add a seventh note, like below, with an "A"  added to the basic Bb major. For "A diminished" lower the top note by two half steps and transpose by +2 half note steps.

  • How to export all tracks into audio files with the same duration

    Hi everybody.
    I am trying to export all the tracks into different audio files.
    It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
    Thanks!!
    Alessandro

    sambino wrote:
    I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
    each track is composed not only by played instruments but also by moments of silence.
    Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
    When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
    The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
    By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
    iSchwartz wrote:
    exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
    If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

  • I want to have chords played so I can experiment with soloing my guitar. Is there a place to choose chords to be played back in GarageBand? For instance I want a Cmajor 7th chord looped? etc.

    I want to have chords played so I can experiment with soloing my guitar. Is there a place to choose chords to be played back in GarageBand? For instance I want a Cmajor 7th chord looped? etc.

    No extra gear required.
    Open up Logic
    Select 'software instrument' from the New Tracks box (which opens automatically with a new project)
    Select an instrument from the Library (to the right of the Global Tracks field), e.g. piano
    Click on the Tools icon, a drop-down list appears
    Select the Pencil tool
    Click in the Global Tracks area, next to your piano instrument track. A green box of a few bars will open
    Doubleclick on that and then, using the Pencil Tool again, draw your notes for each chord.
    Drag and 'draw' a green bar at the top of Global Tracks, and that's your loop.
    Play it and jam along!

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I want to update my IWorks which I have downloaded with another Apple ID in this same computer. What I have to do?

    I want to update my IWorks which I have downloaded with another Apple ID in this same computer. What I have to do?

    Update it from the original Apple ID or delete and redownload the applications when signed into another one; the second option may require repurchasing them.
    (111224)

Maybe you are looking for