I was charging my iPad2 and when reaching 90% it just went black and can't be started again. Anyone that have had this problem and know what to do?
I was charging my iPad2 and when reaching 90% it just went black and can't be started again. Anyone that have had this problem and know what to do?
I have had this problem several times. The iPad comes off charging with a black screen and only a hard reset works to get it back. Then you have to go to settings to be sure nothing changed there.
I have had serveral hard resets and three restore operations and the problem recurs. I am not sure if it is the iPad2 or an app that is causing the problem. So far I can live with it as is.
Jay
Similar Messages
-
I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?
Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike -
When using apple tv, it also controls a macbook. anyone that have got this problem
installed an apple tv but when i started to use it, it began to control a macbook.
has this happend to anyone else?
it´s the 1080 versjon apple tv (2) i thinkThey use the same type of remote that's why.
You can pair remotes with devices, computers so the device/computer only responds to that remote.
Simpler if you don't use a remote with the Mac just to go to System Preferences and under Security>General there should be an entry to disable the Mac IR sensor.
AC -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?
This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11 -
In the two days since updating to iOS8 my iPad has restart itself randomly 5 times. I was wondering if anyone else had this problem and if there is an update coming out to fix it.
Hi DSfromMO2,
I have this happening to me too... it is frustrating enough for me to pitch my computer out the 4th floor office window. I found somewhere on these forums a solution which worked for me, but only for a short time. I'm back to having this stupid glitch. Anyway, the "temporary" solution seems to be to boot into Safe Mode by holding the Shift button down when you hear the startup chime, then let go when you see the Apple logo on the screen. You'll see you've done it right because it'll say Safe Mode somewhere on screen (upper right hand corner?). Restart again normally and your Mail should be free from these weird demons, but they'll be back. -
have an Ipod Touch and when I activate the shuffle mode it keeps replaying the same song. How do I fix this problem?
While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
By the way, this is the iPod Shuffle forum. Since you have an iPod Touch, you should have posted this in the iPod Touch forum.
B-rock -
When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?
See "error -3259" here.
-
When trying to update to iOS 7.0.4 I get a message saying that the update has failed. I've followed the instructions on Apple Support. Has anybody else had this problem and if so, how did you get over it?
Check For Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%204/deb765f74dc0acb6038 d1fc55eed7fce_zps9330117d.jpg -
I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?
The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?
What version of FCP X are you using?
What is the full spec of your Mac?
What codec (file format) of video are you working with.
Andy -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
When trying to edit a text message on my iphone5 the edit bubble will pop up but it is non responsive for about thirty seconds before it will respond to the key functions. It just lags behind. Has anyone else had this problem and if so is there a fix?
I rarely record automation, and when I do I never do a second pass (usually hand draw automation in) but I have had problems with Logic 7 no longer playing back automation. I've been told its fixed in Logic 8, but in the mean time here is a work around.
Select the region where the automation is (if there is no region, create one using the pencil tool and expand it to cover all automation) and go OPTIONS menu -> TRACK AUTOMATION -> "Move current track data to region data." Now everything should play back as expected. If you want to edit the data, simply select "move current region data to track data" and edit away.
For some reason, Logic 7 will sometimes stop reading track automation data, but I have yet to have it stop reading region automation. This is a bug, and according to other users, has been fixed in Logic 8. Hope this helps until we eventually upgrade -
i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.
Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo. -
I have removed every possible componet of Mozilla Firefox from my computer and I still get a message when I turn on my computer that Firefox had a problem and needed to close. How do I get this completely removed from my computer?
See:
* http://kb.mozillazine.org/Profile_backup
You can transfer files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
I have two questions: 1) I have multiple logins in my iMAC. How do I move photos/albums from one login to another? 2) I have created albums with "Description" for each photos, so that, in a slide show, any one can see what is being shown on the photo
-
I had to replace my solid state drive in my macbook pro. Since it was full of a strange virus nobody could identify, I only saved the files I needed and no programs. Now I tried to get the full version of Lightroom 5 again but it would not accept my
-
Samsung Note 3 not compatible with Share Name ID
I recently bought a Note 3 and today was trying to change the Share Name ID but it states that it's not compatible with my device. Has anyone else experienced this? I was logged in as account manager as I only have 1 physical voice line on my account
-
I downloaded Photoshop CS6 Extended and it has Raw 7.0 -- where can I get |Raw 7.3????
-
Hi Friends I Tried Below Link https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/technologies/ms%20word-like%20spell%20checker%20for%20sap%20gui%20fields But everytime it is raising exception 'Control Error' In belo