I was strucked in BDC recording scenario help me?

Hi expertsu2026u2026u2026
I am working on the scenario BDC Recording for fk01 and I am getting an error?
Error is : Different number of parameters in FORM and PERFORM(routine:BDC_FIELD,number of normal parameters:2,number of actual parameters:3).
Following is as follows source code.
report ZROHIT_BDC_FK01 no standard page heading line-size 255.
include bdcrecx1.
DATA:BEGIN OF ITAB OCCURS 0,
     LIFNR(16),
     BUKRS(4),
     KTOKK(4),
     ANRED(15),
     NAME1(35),
     SORTL(35),
     STRAS(3),
     ORT01(35),
     ORT02(35),
     LAND1(10),
     AKONT(10),
     END OF ITAB.
start-of-selection.
CALL FUNCTION 'UPLOAD'
* EXPORTING
*   FILENAME                      = 'D:\'
*   ACT_FILETYPE                  =
TABLES
    DATA_TAB                      = ITAB
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
LOOP AT ITAB.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              ITAB-LIFNR                  'ROHIT100'.
perform bdc_field       using 'RF02K-BUKRS'
                              ITAB-BUKRS                  '1000'.
perform bdc_field       using 'RF02K-KTOKK'
                              ITAB-KTOKK                  '0002'.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_transaction using 'FK01'.
END LOOP.
perform close_group.
thanks in advance
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code and please use code tags.
Edited by: Rob Burbank on Oct 7, 2009 10:34 AM

Hi,
The performs should be like this:
FORM bdc_dynpro USING program TYPE bdc_prog
                      dynpro TYPE bdc_dynr.
CLEAR wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro = dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO gi_bdcdata.
ENDFORM .                    " bdc_dynpro
*&      FORM BDC_FIELD
FORM to get the field name and field value
FORM bdc_field USING fnam TYPE any
                      fval TYPE any.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = fnam.
wa_bdcdata-fval = fval.
APPEND wa_bdcdata TO gi_bdcdata.
ENDFORM .                    " bdc_field
and make the changes as stated in your code:
LOOP AT ITAB.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
>>perform bdc_field       using 'RF02K-LIFNR'
        >>                      ITAB-LIFNR                  " 'ROHIT100'.
>>perform bdc_field       using 'RF02K-BUKRS'
    >>                          ITAB-BUKRS                " '1000'.
>>perform bdc_field       using 'RF02K-KTOKK'
    >>                          ITAB-KTOKK                  " '0002'.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_transaction using 'FK01'.
END LOOP.
Regards,
Rajesh Kumar

Similar Messages

How to capture F4 help during bdc recording

Hello All,
I need one help to solve one of the requrimkents..
In transaction Co02, user have to add the compoenents manually..but before user adds the components manually, i need to call the transaction co02, then i have do F4 help and fill the data for the user and then user will handle it manually...
So till F4 help and filling the data in F4 help, i need to do through my program using bdc...when i try to do, F4 help is not captured in my recording..
So please help me how to capture F4 help during BDC recording.
Thanks in advance
Sangeetha

HI Sangeetha,
I have one question for you!!!!
Capturing F4 help in BDC recording is secondary thing. First, If you want the user to select the value from the F4 help, then in that case user will have to run the BDC program in the foreground mode which is not possible and time consuming if your file is having more records (say >100). Then in that case will you prompt the user every time for selecting the component values, as many records there will be in the file to be uploaded??? I think it is not a way of handling or capturing the component values. I would prefer that pass the component values in the file which has to be uploaded.
Please let me know if you still have some doubts on the same.
Thanks
VJ

Need help for bdc recording TC fp05

Hi,
My requirement is: I want to create a Payment lot using fp05 and then post
it through a program.
First i want to know is there any BAPI available to do that.
I couldnt find any BAPI. That is why i did BDC Recording. The recording is working till Payment Lot creation. But after creation when i try to post the lot, it is giving status as "Direct Posting Stopped". Again if i come out of the program and then manually post it, it is working fine. But through program if i try to post it, it is giving status as "Direct Posting Stopped".
Is this because we cannot Post a Payment Lot programatically or some Authorisation issue is there.
Can anyone respond immediately
Regards,
Sheron

Hi Raj,
May be this can be useful.
BAPI_INSPOPER_RECORDRESULTS
You can search other in se37 BAPIINSP.
Regards,
Amit Mittal.

BDC recording for AS01

hi all,
how to do bdc recording for AS01.please send me step step by approach.

Hi Satya,
Welcome to SDN.
Check this Sample program.
REPORT ZASSET .
INCLUDE ZASSET_INC .
PARAMETERS: P_PCFILE LIKE RLGRAP-FILENAME.
*PARAMETERS: P_FILE_S LIKE RLGRAP-FILENAME.
PARAMETER : H_CHK AS CHECKBOX.
"Proc Mode
Include the BDC *
**BDC DATA STUCTURE
*DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
*DATA: END OF BDCDATA.
messages of call transaction
*DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
TYPE-POOLS
TYPE-POOLS TRUXS.
DATA IT_DATA1 TYPE TRUXS_T_TEXT_DATA.
DATA : BEGIN OF IT_DATA OCCURS 0,
INVZU(015),
ANLKL(008),
BUKRS(004),
TXT50(100),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
PERNR(012),
KFZKF(015),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA.
DATA : BEGIN OF IT_DATA2 OCCURS 0,
INVZU(015),
TDATE(010),
TCODE(004),
TAMT(018),
END OF IT_DATA2.
DATA : BEGIN OF IT_DATA3 OCCURS 0,
ITEM(003),
INVZU(015),
ANLKL(010),
BUKRS(010),
TXT50(050),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA3.
SUB ASSET MASTER TABLE
DATA : BEGIN OF IT_DATA_SUB OCCURS 0,
INVZU_M(015),
INVZU(015),
BUKRS(004),
TXT50(100),
ANLHTXT(050),
SERNR(018),
MENGE(018),
MEINS_007(003),
XHIST_008(001),
AKTIV(010),
GSBER_011(004),
KOSTL(010),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ_016(001),
LIFNR(010),
LIEFE(030),
NDJAR(003),
NDPER(003),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
BZDAT(010),
BWASL(003),
ANBTR01(016),
ANLN1(012),
ERR_SUB,
SUB_CODE(012),
ERR_SUB1,
END OF IT_DATA_SUB.
*& At selection-screen on value request for getting f4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM VALUE_REQUEST_P_FILE.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_S.
PERFORM VALUE_REQUEST_P_FILE_S.
START OF SELECTION *
START-OF-SELECTION.
To Upload the flat file datas *
PERFORM GET_DATA.
PERFORM UP_LOAD.
PERFORM SUB_UPLOAD.
WRITE :/ 'FOLLOWING ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 20 'COMPANY'.
WRITE: 30 'SAP CODE'.
LOOP AT IT_DATA WHERE ERR_ASSET NE 'X'.
WRITE :/ IT_DATA-INVZU,
20 IT_DATA-BUKRS, 30 IT_DATA-SAP_ASSET.
ENDLOOP.
SKIP 2.
WRITE :/ 'FOLLOWING SUB ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 16 'OLD SUB ASSET'.
WRITE: 35 'COMPANY'.
WRITE: 45 'SAP CODE'.
WRITE: 60 'SUB ASSET'.
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X' AND ERR_SUB1 NE 'X'.
WRITE :/ IT_DATA_SUB-INVZU_M,
16 IT_DATA_SUB-INVZU,
35 IT_DATA_SUB-BUKRS, 45 IT_DATA_SUB-ANLN1, 60
*IT_DATA_SUB-SUB_CODE.
ENDLOOP.
*& Form value_request_p_file
FORM VALUE_REQUEST_P_FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_PCFILE.
ENDFORM. " value_request_p_file
*& Form UP_LOAD
text
--> p1 text
<-- p2 text
FORM UP_LOAD .
SORT IT_DATA BY INVZU.
SORT IT_DATA2 BY INVZU.
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
perform open_dataset using dataset.
PERFORM OPEN_GROUP.
LOOP AT IT_DATA.
CONDENSE IT_DATA-TXT50.
V_LEN1 = STRLEN( IT_DATA-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'ANLA-ANLKL'
IT_DATA-ANLKL.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXA50'
V_SUBSTR2.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA-MENGE.
*perform bdc_field using 'ANLA-INKEN'
record-INKEN_006.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-PERNR'.
PERFORM BDC_FIELD USING 'ANLZ-PERNR'
IT_DATA-PERNR.
PERFORM BDC_FIELD USING 'ANLZ-KOSTL'
IT_DATA-KOSTL.
PERFORM BDC_FIELD USING 'ANLZ-WERKS'
IT_DATA-WERKS.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA-STORT.
IF IT_DATA-ANLKL = 'VHCL'.
PERFORM BDC_FIELD USING 'ANLZ-KFZKZ'
IT_DATA-KFZKF.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD42'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA-ORD42.
*perform bdc_field using 'RA02S-EQANZ'
record-EQANZ_014.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB06'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA-LIFNR.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLV-VSART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RA02S-XAKPLA(02)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-AFASL'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
ENDIF.
PERFORM BDC_FIELD USING 'ANLB-ANLGR'
IT_DATA-ANLGR.
PERFORM BDC_FIELD USING 'ANLB-ANLGR2'
IT_DATA-ANLGR2.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-ANBTR01_01.
IF H_CHK NE 'X'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA-ANBTR01_06.
ENDIF.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA-TDATE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA-TCODE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-TAMT.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS91' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
PERFORM BDC_TRANSACTION USING 'AS91'.
ENDLOOP..
PERFORM CLOSE_GROUP.
*perform close_dataset using dataset.
ENDFORM. " UP_LOAD
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_PCFILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_DATA3.
IF IT_DATA3-ITEM = '1'.
MOVE-CORRESPONDING IT_DATA3 TO IT_DATA.
APPEND IT_DATA.
ELSEIF IT_DATA3-ITEM = '2'.
IT_DATA2-INVZU = IT_DATA3-INVZU.
IT_DATA2-TDATE = IT_DATA3-ANLKL.
IT_DATA2-TCODE = IT_DATA3-BUKRS.
IT_DATA2-TAMT = IT_DATA3-TXT50.
APPEND IT_DATA2.
ENDIF.
ENDLOOP.
IF NOT P_FILE_S IS INITIAL.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_FILE_S
TABLES
I_TAB_CONVERTED_DATA = IT_DATA_SUB.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " GET_DATA
FORM BDC_DYNPRO
--> PROGRAM
--> DYNPRO
**FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
**ENDFORM. " BDC_DYNPRO
FORM BDC_FIELD
--> FNAM
--> FVAL
**FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
**ENDFORM. "BDC_FIELD
***& Form bdc_transaction
text
-->TCODE text
**FORM BDC_TRANSACTION USING TCODE.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
**ENDFORM. " bdc_transaction
*& Form VALUE_REQUEST_P_FILE_S
text
--> p1 text
<-- p2 text
FORM VALUE_REQUEST_P_FILE_S .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_FILE_S.
ENDFORM. " VALUE_REQUEST_P_FILE_S
*& Form sUB_upload
text
--> p1 text
<-- p2 text
***FORM SUB_UPLOAD .
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
CONDENSE IT_DATA_SUB-TXT50.
V_LEN1 = STRLEN( IT_DATA_SUB-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA_SUB-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA_SUB-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA_SUB-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA_SUB-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXa50'
V_SUBSTR2. "IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
IF IT_DATA_SUB-BWASL IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
Accu deprn automatically calculated by system changed on 6th Aug.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
****& Form SUB_UPLOAD1
text
***FORM SUB_UPLOAD1 .
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
and one more thing i face some issues when doing bdc for AS01, so i use AS91 and AS92 for uploading by using LSMW (direct input method and recording method) and it was successful.(if u have to do coding go for BDC/BAPI or there is no coding better to choose LSMW (it is the easiest way) as of my knowledge, so before starting just analyze once which method is best for ur requirement.
Reward Points for Useful Answers
Thanks
Naveen khan
Message was edited by:
Pattan Naveen

BDC recording not executing last OK code for order technical completion

Hello!
Regarding a QM requirement, I have created a rather simple BDC recording to change the activity type of an order to new ones (based on particular conditions not relevant here) on transaction IW32.
However, if the order is technically complete, I have to cancel the technical completion, change the activity type, and then complete the order technically again (so it remains just the way it was before modification).
The only order types relevant in the requirement are YM01 and YM02. For YM01, the BDC recording works like a charm. But when executing the proper recording for type YM02, the last OK code (i.e. pressing the OK button on the Complete subscreen) is ignored and the process remains incomplete: the orders are never completed technically again.
Here is the recording:
0     T     IW32     BS AA X   F
SAPLCOIH                       101     X
0           BDC_OKCODE     /00
                                        0           CAUFVD-AUFNR     80000005
SAPLCOIH                       3000     X
0           BDC_OKCODE      =WIAR
SAPLCOIH                       3000     X
0           BDC_OKCODE     /00
                                        0           CAUFVD-ILART     206
SAPLCOIH                       3000     X
0           BDC_OKCODE      =ARCH
SAPLIWO1                           200             X
0           BDC_OKCODE      =WTER
                                        0           RIWO1-CLNOT     X
Any help would greatly appreciated!
Best regards,
André Santos

Leandro, thanks for the answer!
The BDC recording does not work when executed visibly or step by step. After some extensive debugging, I realized that the final screen (the technical complete confirmation screen) is not an actual subscreen, even though it has its own number. That screen is actually generated by an FM, so apparently that's why it's ignored when the BDC is executed.
I found a BAPI to replace that missing step: BAPI_ALM_ORDER_MAINTAIN. However, I'm having a hard time figuring out how to reference the orders I need it to complete. The FM asks for an IT_METHODS table and I couldn't tie the method to the orders:
it_methods-refnumber = ???
it_methods-objecttype = 'HEADER'. "That's what I found on the example, not sure whether this is right or not.
it_methods-method = 'TECHNICALCOMPLETE'.
it_methods-objectkey = ??? "Maybe the order number itself?
APPEND it_methods.
Has anyone used this BAPI before?
Edited by: André Felipe Oliveira dos Santos on Oct 20, 2010 2:18 PM

CA01 Routing BDC Recording

I have done a BDC recording for CA01, in the Setup Time and Machine Time column there was a warning message saying "Enter the Setup Time", we press enter and enter a value for both these fields. But the OK Code for this ENTER is not being recorded, and when we run the BDC Program, it comes and halts at this field with the warning message. How to avoid this warning message (or) overcome this problem..?
Your help is highly appreciated.
Thanks
Murugappa

Hi,
I suggest to use the BI program with following details for the creation step by CA01 tx.:
Objekt               0170   Arbeitsplan
Methode              0001   Batch Input
Programmname         RCPTRA01
Programmtyp          B   Batch-Input
Since the Routings have a complex data dependency on other objects and screen sequence, this would be helpful.
May be the problem you are facing also could be addressed in this standard object. I have not faced any such message problem as I have loaded Normal / Standard routings, Quality routings in above method.
Hope this helps.
Best Regards, Murugesh AS

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

Material Master BDC recording

hi gurus,
i am trying to do a material master creation using BDC recording,
i am new i dont know how to modify the code,
the following is the code, please let me know how to make changes.
report ZTEST95
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case default
                              'C:\Documents and Settings\Deskt'
                            & 'op\test95.txt'.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: MATNR
        MATNR_001(040),
data element: MBRSH
        MBRSH_002(001),
data element: MTART
        MTART_003(004),
data element: REF_MATNR
        MATNR_004(040),
data element: XFELD
        KZSEL_01_005(001),
data element: MAKTX
        MAKTX_006(040),
data element: MEINS
        MEINS_007(003),
data element: MATKL
        MATKL_008(009),
data element: SPART
        SPART_009(002),
data element: MTPOS_MARA
        MTPOS_MARA_010(004),
data element: BRGEW
        BRGEW_011(017),
data element: GEWEI
        GEWEI_012(003),
data element: NTGEW
        NTGEW_013(017),
      end of record.
End generated data section ***
start-of-selection.
perform open_dataset using dataset.
perform open_group.
do.
read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_field       using 'RMMG1_REF-MATNR'
                              record-MATNR_004.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_005.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_006.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_007.
perform bdc_field       using 'MARA-MATKL'
                              record-MATKL_008.
perform bdc_field       using 'MARA-SPART'
                              record-SPART_009.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_010.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-BRGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              record-BRGEW_011.
perform bdc_field       using 'MARA-GEWEI'
                              record-GEWEI_012.
perform bdc_field       using 'MARA-NTGEW'
                              record-NTGEW_013.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
perform bdc_transaction using 'MM01'.
enddo.
perform close_group.
perform close_dataset using dataset.
thanks.

Hi,
It is better if the Material Master creation step is done by LSMW - Direct Input method with the following object:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Check the program documentation for more details.
For a sample data file generation ( Sequential file ), check the program RMDATGEN
If the reqmt., is for a repetetive loading of Material Master you could schedule / execute the LSMW by following program: /SAPDMC/SAP_LSMW_INTERFACE.
Hope this helps.
Best Regards, Murugesh

How to use BDC recording in Workflow.

Hi experts,
Anyone kindly help me for the following case...
If sales order gets created, mail has to be sent to every user. Also for that sales order, delivery should be created in background and again mail has to be sent to all users...
I m clear with sending mail. but i m struggled while creating delivery in background. i dont know how to do this. I hav an idea that it can be created using BDC recording and this recording program can be called in our method which is created in our business object.
How to create a single BDC recording to create sales order as well as creating delivery in background... Is it possible to do like this. Or is there any function module to create delivery in background with respect to sales order number?
kindly give some suggestion and step by step procedure to do this...
Thanks in advance...
Regards
Raaams...

Hi Ram
Check this BAPI once BAPI_OUTB_DELIVERY_CREATE_SLS.
If this doesnt help do BDC recording and create a FM with the help of BDC recording. Please note that Call Transaction should happen in background otherwise your BDC wont work.
Please revert back if you have any queries.
Regards,
Gautham Paspala

BDC recording for s_alr_87012090

Hi Friends,
My requirement :
As we do vendor changes in xk02, the critical data like bank details, name and address are to be confirmed. so my client want, the changes done in address should not got to confirmation, so I want to do BDC recording for S_ALR_87012090 ( confir vendor changes ). and will check if only address changes are done then i will run these BDC recording .
but i am unable to do recording.
please help me out.
regards
Kumar M

Hello Kumar M,
What is the issue with it? Why cant you do the recording?
BR,
Suhas

Bdc recording for trancastion ME01

Hi,
Can u help me in BDC recording for transaction 'ME01' .
I have no idea for transaction 'ME01' & here i like to know how to handle table ctr during bdc recording?
give sample code if possible.
Thanks

See the sample attached code for ME51 using table control.
similarly record the same for ME01 and copy the TC logic from this.
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
reward if useful
Regards
Vasu

BDC recording for transaction 'Me01'

Hi,
Can u help me in BDC recording for transaction 'ME01' .
I have no idea for transaction 'ME01' .
give sample code if possible.
Thanks

For creating source list you will check that purchasing view has been maintained for this material
Source list for resticting, purcasing a material from a specific vendor only for the period specified in source list
Regards,
Amit R.

To display flatfile rec's under 1 Alternative BOM using BDc recording.

Hi,
I m trying to display flat file entire(i.e.. 4 rec's i m using) records vertically under one (Alternative BOM) for CS01-BOM using BDC recording method.
Now i m tried with the following code,i m getting as one (Alternative BOM) for one ff record,by replacing one by one.
But i want as vertically under one (Alternative BOM).
Can anyone help me to overcome this.
report ZBOM
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(001)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(001)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(001)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(001)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi Dilip,
Please change your code.
I request you to please go through BDC tutorials before even starting to write the program.
There are many online tutorials which can help you with.
Also, search in SDN.. there you will get more than thousand results.. with the search term BDC.
Take this suggestion seriously before nayone reports the moderators that u have been posting this thread daily without taking into consideration the previous replies.
Regards,
Vishwa.

Vendor Master (XK02) - Missing Screen fields in BDC recording.

Hi All,
I have extended IDOC type cremas03 to add some extended fields (sort1 and sort2) which are not in the standard IDOC. In the exit ZXVSVU04, I plan on doing a call transaction to XK02 to update the required fields. In my BDC recording, the two fields are not available, but are available when not in BDC both in change and create. I have also tried recording FK02 and this behaves the same way. Is there a way of having these fields added so they are available in the BDC session?
Best regards,
James.

Hi
Really strange ...
What all comes in the last section of the Web page, when you are using BBPMAINTINT transaction in SRM4.0?
Look carefully, below the email option, there is an option for FTP as well.
OR
Is email option is coming as a drop-down list ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

I was strucked in BDC recording scenario help me?

Similar Messages

Maybe you are looking for