I was using my iPad this morning and my internal speakers just stopped working when I tried to turn my nighttime playlist on. Does anyone know what I should do?
I was listening to music this morning and the speakers on my iPad were working perfectly fine. Then I opened my iSleep App and used it to turn on my nighttime playlist and my alarm clock and my speakers weren't working. I tried restarting it (twice) and it didn't work.
I plugged my headphones in and sound still comes out. And I don't listen my music all the way or for very long, so I'm pretty sure the speakers didn't blow out.
Does anybody what the problem is?
I can merely offer a suggestion, reset the iPad.
Press Home + sleep/wake buttons simultaneously until the white Apple logo appears.
Similar Messages
-
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
I was using my IPAD this morning. Powered it down, then when I powered it back up, it said activation required.. but it would not accept my password. I hit skip and logged in fine. Is this something I should be concerned about?
Probably - if it happens again. Chalk it up to a fluke occurrence for now.
I get the message on my iPad that it can't connect to the iTunes Store - While I am in the iTunes Store or the App Store happily navigating from one tab to another.
You can try rebooting the iPad to "clear the cobwebs" but if it is OK now, I probably wouldn't be overly worried. Rebooting being holding down on the sleep and home buttons until the Apple logo appears on the screen. -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
hi my phone suddenly turned off, it has a fully charged batterie and i cant turn it back on. Does anyone know what to do?
Tamara Holding both buttons the Power and the Lower Volume is Known as a Power Cycle) In the event that your Razr shuts down and you Try to turn it on and it Doesn't press the power button for 10 sec Let off and then re-peat the process and your Razr should come back on Mine has done this and this is what i done. b33
-
i have a mac book pro and a panasonic SD Video camera SDR-S50 - but i cannot transfer videos from the panasonic to my mac - does anyone know what i should do? - Rochelle
If the macBook Pro will not read the card/files then you might need a converter, check out:
http://www.hdconverterformac.com/article-mod-video/panasonic-sdr-mod-to-mac.html
http://expertscolumn.com/content/how-play-or-edit-panasonic-sdr-mod-files-mac-os -x -
Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?
Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?
Any help or link will be great appreciated.
Thanks.
Solved!
Go to Solution.A DVD caame with the printer. Why not use it? Lost it, just d/l another copy from Canon. It' free.
But the best is Photoshop Elements.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6 -
Hello,
I tried to download updates on my IPhone 4 and a message box appeared saying--after it downloaded the updates on my computer--that my firmware file is not compatible. Does anyone know what this means?
Thank youOnly the individual that set the restrictions passcode knows what it is.
If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new. -
I have an iPad 2 that is about 2 years old and is in good shape. I was trying to swipe off an app when the screen went all white. I held down the power button to shut it down but it wont do any thing but go black. When I press the power button it come back all white with no icons and no passcode pad. Does anyone know how to fix this or what it is?
ThanksTThanks for the suggestion but it turns out that you have to hold down the Home button, the Power button AND the Volume UP button at the same time for several seconds until,the Apple appears To fix the white screen of death. Found that on another help site. It works and boy an I glad. Pass it on.
-
So i put my iphone 4S on standby, i tried and still am trying to turn it back on but nothing is happening...i dont know what to do...can anyone help in telling me what to do, cuz i dont. thanks
Have you tried resetting it? Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.
-
My App icon shows that I have one upgrade. When I try to update this app, to my iphoto, it tells me that I have updates available for other accounts and in order to update this application I need to sign in to the account used to purchased it....I only have one account, so I don't know how to update this, it just stays on my desktop showing that I have 1 update on my App icon...
Are you sure that these Apps were not purchased using another Apple ID...
If so, and you only have one ID, then Contact Customer Service...
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account -
Not sure what to do about the error message I am getting. Also, my itunes is not recognizing my phone when I plug it in.
Just in case, let's try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
A few days ago, I plugged my ipod touch into my computer to charge it, and also add new music I purchased. When I unplugged the USB cable ( I disconnected it from the ipod first, as I was told to do) I went to look through my music. There was a notification, I don't remember what it said verbatum, but the gist was "177 songs could not be properly synced onto your device". Now, I'm missing music from my itunes library. For example, I purchased two full albums from the same band, now over half the songs from the albums are just gone, they are no longer on my ipod or itunes. Does anyone know what happend, and/or how I can fix this? Please and thank you
P.S. This happend after installing itunes 6, I've noticed many other people are also having problems with it as wellCould be several things. Without more information like what was the wording of the error message I will not even guess.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Does Anyone Know What Is Making This Happen?
This happens so often, but so quickly, I am always surprised and can remember what just caused it....that is, what actions I just took that made it happen. But tonight, I started thinking maybe it's some kind of "feature" that one can defeat.
Sometimes, when working in the MIXER window, I will be doing something with an AUX, maybe adding an effect, I don't know...but all of a sudden, it JUMPS over to the right of the screen. If you look at the top of the arrange window (if you can see it behind your mix window), it is as if the fader you are working with has become the FOCUS. Tonight I do remember choosing the OUTPUT fader and with a right click chose to "Create Arrange Track" so I could draw in some animation, and it jumped to the top of the ARRANGE page.
I know this is vague, but basically, I don't want channels changing position once I have them somewhere. Does anyone know what I'm talking about, and is it a feature that can be defeated?
Thanks
TomTom Hartman1 wrote:
Yes I'm sorry that is what it does, it jumps to the LEFT of the screen. And yes it might be in touch mode or some other automation mode, I hadn't thought of that...what is going on there?
It's a "feature". As soon as you put an Aux track into an automation mode, it places it on the arrange page for you automatically. And not only that, it places it at the top of the arrange page, and is therefore, ahead, or in front of the regular audio/instrument tracks, and because of that, gets moved to the first channel strip(s) of your mixer window (since the mixer and arrange update with each other).
Personally, I love the fact that the Aux track gets placed at the top of the arrange page, because that is where I always placed them myself, prior to version 8. But I do find it disconcerting that it moves within the mixer window. I personally would prefer it stay in place, like it would on a hardware console. -
So, i used my laptop this morning and it was dead so I charged it up and went to the bank, when I came back from the bank it wasn't working... WHAT TO DO??
go to iCloud: Find My iPhone,in a computer browserand sign in and go to FIndMyiPhone.
The iCloud: Find My iPhone, is a link. Click on it to go to the site.
Maybe you are looking for
-
Crystal Reports Dynamic Parameters with SAP Business One
Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One. Let's start with the software versions: - Crystal Reports 12.3.0.601 - SAP Business One 8.8 (8.80.231) SP: 00 PL: 13 - Windows XP SP3 (SB
-
When i download music from internet it is not shown in my phone's music library....whenever i want to listen that music i have to open that application through which i have downloaded it. What should be done to fix this?
-
Javax.servlet.jsp.JspException: Missing message for key common.business.Ban
Hi All, I'm a System Engineer. My application code in Java and using JDK 1.3.1. My Application deploy in IBM iSeries V5R2 and not error. But after I upgrade to iSeries V5R3, my application encounter missing message error such as "
-
Oracle intelligent agent executable has encountered a problem and needs to
Hi All, I am getting the following message after commence of OS (windows XP) on my LAPTOP. "Oracle Intelligent Agent Executable has Encountered a Problem and needs to close." due to the above problem it takes time to be fit to start working. that is;
-
Java.sql.SQLException: Invalid column index: prepare_for_new_get
I wrote a small test jsp which gets a DB connection using Oracle 816 type 4 JDBC driver. I have a procedure in the database defined as SQL> desc one PROCEDURE one Argument Name Type In/Out Default? ID NUMBER IN/OUT My jsp code does the following... s