I would like to know if iphone 5 GSM model A1429 unlocked is available in stores in the US in order to buy and use in Europe
I would like to know if iphone 5 GSM model A1429 is unlocked and is available in stores in the US in order to buy and use in Europe. Please let me know.
Thanks
ST
Not officially for sale in the US, at the present time, although Apple's flagship store on 5th Ave, in New York City, gets supplies from time-to-time. However, no GSM US model iPhone 5 will support LTE anywhere other than North America. It will not support LTE in Europe. If you want LTE support in Europe, you need to purchase your phone in Europe.
Similar Messages
-
Does anybody know how to do?
Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
i have an iphone 3gs, i bought it with the carrier Orange in Mauritius and i would like to know if it is possible to unlock the iphone so that i can use another carrier. thanks
Only the carrier can authorise unlocking. You need to contact them.
-
I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana
That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
http://support.apple.com/kb/HT2109
If you want to setup your new phone as a new device, then there is nothing you need to do. -
I would like to know if after subscribing to ITunes Match I will be able to delete my library from my PC and, by these means, liberating the disk space currently used by my music
Your purchased music is availble for download again at no cost. If you have iTunes match service, you can download your matched music.
-
I purchased and downloaded creative cloud yesterday on my desktop computer, I would like to know how to get it onto my laoptop. Whenever I go looking, it wants me to buy it agian.
Hi Brooke,
There are very simple steps to download creative cloud on your other machine as well.
You can follow the below links:
Creative Cloud Help | Install, update, or uninstall apps
Download Adobe Creative Cloud apps | Free Adobe CC trial
After downloading you can sign in to creative cloud desktop application with your Adobe ID and the applications would be activated.
Regards
Akshey Malhotra -
I would like to know if I can get and iPhone 4 or 4s unlocked at the apple store in Chicago or NYC
You can probably get an unlocked iPhone 4. Apple has not yet released unlocked versions of the iPhone 4S in the US, at least not officially, though unconfirmed reports have claimed that some Apple Stores have had some. You'd need to contact the appropriate Apple Store and ask.
Regards. -
I would like to know how to print a 8 1/2 X 11 sheet of the same 2 x 2 photo.
Printer is HPPhotosmart C5280 All in One: OS is Windows XP Professional 32-bit
I would like to know how to make a full 8 1/2 x 11 page of the same 2x 2 borderless photo. I can add other photos but not the same phot to the same page. Is this possible?Hi Tberger,
If i understand you right you are saying you want to add the same 2x2 photo twice on a full 8 1/2 x 11 page ?
Are you using a certain printing application or program or are you just printing directly from the computer ?
Here is a copy of the user guide for your printer
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP. -
I have a 3GS and would like to know how to auomatically send a call to voicemail when it starts ringing in my old phone I could put them on the reject list but cannot located that here is it possible? If so how?
Press the on/off button once to silence the call and twice to reject it and send to voicemail.
-
Dear Apple Team,
I would like to know when you will add the turn-by-turn directions feature in The United Arab Emirates as I'm planning to buy a carplay navigation device soon.
regards,
Hamadthis is a user helping user forum we are users like you if you wish to contact apple use feedback channel
http://www.apple.com/feedback/ -
LTE for Japanese iPhone 5 (gsm) model A1429 **unlocked** ME039J/A
I have been reading forums for years, never posted before so here goes.
I purchased an unlocked iPhone 5 from an online merchant. I was replacing the iPhone 5c that was stolen from me. Any way, The phone arrives and I pop an an old t-mobile nano sim in it and it registers on t-mobiles network as 4G (not 4G LTE) I figured this was because the service was not active. I decided to go with NET10 as my provider. Any way it activates as TFW 3G. I almost lose my mind... I'm finding out that this iPhone may not support LTE in the United States... I am hoping this is incorrect... Although 4G is nice to have I would most rather prefer LTE service.
PLEASE HELP..Due to the variances in how LTE is implemented, it is unlikely that
you will get LTE on an iPhone meant for other than the US market.
If LTE is important to you, sell that iPhone and use the funds towards
the purchase of an iPhone meant for the US market. You have run into
one of the problems of trying to use an iPhone outside of the intended
market for that particular model. -
I would like to know why iPhone 4S Battery backup has been reduced after updating it to 5.1 firmfare
When i bought it, i was getting a gud battery backup of 2 days. Based on my usage.
Even now after updating the firmware my usage is same as before.. but the battery drains very fast...Hi aznur,
Article: HT1476 iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
Charging with a FireWire-based power source is not supported, except on original iPhone and iPod touch (1st generation). If the device is connected to a FireWire-based charger or accessory, this alert screen will appear:
Charging is not supported with this accessory.
Have a nice day,
Mario -
Please if anyone knows how to solve this problem, I bought this mac brand new, first time using it and many pages dont render the texts or links. It shows it like a series of "A"s.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
i have just closed an important window and i really need to recover it, but is not the last windou closed, so is not possible to get it pressing ctrl + shift + T, is there any way to recover recently closed windows?
Hi missionario,
Try going to ''History > Recently Closed Windows''. There is also an option for ''Recently Closed Tabs''.
Hopefully this helps! -
So, I search the binary matlab file format('*.mat').
Title:
Moving Data Between MATLAB® and LabVIEW
Problem:
How can I share data between LabVIEW and the MATLAB environment?
Solution:
MATLAB users can move data between the
MATLAB environment and LabVIEW, you have several options. Prior to
LabVIEW 5.1, the only way to transfer data between these two
environments was to use the Save and Load functions. Those are discussed herein.
Beginning
in LabVIEW 8.0, MathScipt was introduced. MathScript is an integrated
part of LabVIEW that you can use to combine intuitive graphical
dataflow programming with math-oriented textual programming. See the
attached links below for more information on MathScript.
Beginning
in LabVIEW 5.1, the MATLAB script node was introduced into the LabVIEW
programming environment. The MATLAB script node makes ActiveX calls to
the MATLAB software from within LabVIEW. This requires that both MATLAB
be installed on the same machine and that a valid license is obtained.
More information on the MATLAB script node can be found in the attached
KB's.
For all versions of LabVIEW, this data transfer can be
performed by saving the data in a file using the MATLAB software and
reading it directly from LabVIEW, or vice versa. In the MATLAB
environment, the command "save" allows you to save the data in
binary format (*.mat) or ASCII format. You also have an option of
saving it in ASCII format using a tab delimiter between data points and
the command "load" allows you to read in the data.
ASCII Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment using an ASCII file format.
From the MATLAB environment to LabVIEW
To save a vector or a matrix X in tab-delimited ASCII format, enter the following in the command window or m-script file in the MATLAB environment:
>>SAVE filename X -ascii -double -tabs
This creates a file named filename containing data X in tab-delimited ASCII format.
Import the file into LabVIEW using the Read From Spreadsheet File VI located on the Functions»File I/O palette.
From LabVIEW to the MATLAB environment
To export a matrix X from LabVIEW to the MATLAB environment, first save the data in ASCII format in LabVIEW using the Write To Spreadsheet File VI on the Functions » File I/O palette.
Enter the following in the command window of the MATLAB environment, or in the m-script file:
>> LOAD filename
This reads the data into the MATLAB environment.
Binary Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment.
From the MATLAB environment to LabVIEW
As mentioned above, LabVIEW does not save multiple variables to one
data with extra manipulation, and will not be discussed here.
Therefore, the only way of sending the data from the MATLAB environment
to LabVIEW without tampering with the MAT binary file structure is
using the ASCII format. Also, please bear in mind that you need to have
one file for one variable.
From LabVIEW to the MATLAB environment
Because
the MATLAB software saves data in its own binary format, the "MAT"
file, binary LabVIEW data must be converted to this format prior to
transferring the data. The attached examples can be used to save
LabVIEW data in the MATLAB software format. The convenience of the .MAT
file format is that more than one variable can be saved in the same
file. The example shows saving seven variables to .MAT format; the
example can be modified for any number of variables.
Once this data is saved from LabVIEW, it can be read into the MATLAB environment, using the following command:
>>LOAD filename
The Who
command can then be used to display all the seven variable names, and
you can display the content of them by entering the variable names at
the command prompt as usual.
MATLAB® is a
registered trademark of The MathWorks, Inc. Other product and company
names listed are trademarks and trade names of their respective
companies.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |
Maybe you are looking for
-
Initial load of Java / JIniator
On our Linux server, we have the config set up so new users will have an auto-download of JInitiator, then they go straight to the login form. However, a new user just tried to get into our system, and it appears that JInitiator is starting to load,
-
How to Configure HTTPs sender communication in XI
Hi, I have a request for new interface setup, in which i need to configure HTTPs sender communication from a B2B server to SAP system. Scenario is to receive XML 0rders from HTTPs B2B system and convert to Idoc and post it to SAP. Please could some o
-
I cant load some web pages from safari?
My Mac has over the last 24 hrs become very slow! It will load some pages but not others. I can access my email on Hotmail but not google or apple etc? When I click on safari the apple address comes up but the page doesn't load the blue bar is hal
-
HDMI cable- plug into stereo instead of tv?
Can I plug the HDMI cable into my stereo receiver instead of the tv? I ask because the sound quality with the digital optical cable is very poor when I shut off tv and sound only comes out of the speakers? What should i do ?? Thanks
-
Good day buddies. We are trying to find authorisation object that used by transaction PFTC. Users is able to see workflow template (object type WS, WF) but they are unable to display workflow task (object type TS, T). The SU53 doesn't produce anythin