IAC iview - Hiding Menu

Hi All,
I have an requirement to display SP02(spool request) in portal. I cant use transactional iviews and IAC iviews with ~WEGUI enabled. So i have created an IAC Iview with the property ~WEBGUI = 0. So that the user can open the transaction SP02 without sap launch pad. I created and its working fine.
My requirement is: I want to hide the Menu and title bar. i.e only the spool request should be displayed. Please help me in achieving this.
Regards,
Anand

See if this helps you :
http://wiki.sdn.sap.com/wiki/display/HOME/Article%2b-%2bEmploy%2bSAP%2bGUI%2bfor%2bHTML%2binstead%2bof%2ban%2bInternet%2bservice?bc=true

Similar Messages

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its ->webgui
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

ESS Bus. Pkg EP 6.0 SP19 to R/3 4.7 ext.2 - IAC iView Problem

Given the above components, I've deployed the ESS business package to the Portal. All components deployed successfully... no errors. I'm creating a new Role (custom, not from BP) and I'd like to use one of the iViews from the Business package in this role. I'm using the "Enrollments" iView which seems to be an IAC iView calling PZ14.
Now the problem... when I access this iView via the Portal, ITS is called and the iView loads but only shows me the Easy Access Menu (SMEN). PZ14 never loads. I can enter PZ14 in the transaction field and it will load but it doesn't come up on its own. I also created a SAP GUI for HTML transaction iView to test PZ14 and that one works fine. To meet the customer's requirements though it must look "pretty" ... like the IAC iView does.
The only thing I changed on the iView was the system alias. Changed it from SAP_R3_HumanResources to SAP_R3 (this is the proper name of the system I'm using to test).
Any ideas?
-Kevin

This has been resolved. Oddly enough, I inadvertantly added /webgui/! to the end of the ITS Path definition in the system object. This was causing the afore mentioned behavior. Once removed, the iView behaved as expected.
-Kevin

Internet Services & IAC Iviews

Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.

hi,
Description
Enables / disables the SAP Easy Access menu immediately after logon if no transaction is specified when running the SAP GUI for HTML.
If ~webgui_easy_access_menu is set to 0 or it is undefined and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen without the SAP Easy Access menu. To display the SAP Easy Access menu, they have to request it explicitly by choosing Start SAP Easy Access.
If you set ~webgui_easy_access_menu to 1 and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen with the SAP Easy Access menu immediately.
Set by
Service file webgui.srvc .
Values
0
Displays the initial SAP screen without the SAP Easy Access menu after logon to the SAP GUI for HTML, if no transaction is specified (default).
1
Displays the initial SAP screen with the SAP Easy Access Menu after logon to the SAP GUI for HTML, if no transaction is specified.
Example
~webgui_easy_access_menu 1
Try using this service parameter in your internet service file and let me know
You can also view other parameters in the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/24/ef243a84da356be10000000a11402f/frameset.htm
Regards,
Manish

Internet Servies & IAC Iview

Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.

Hi
Do you mean, the System object - ITS properties.
It was /sap/bc/gui/sap/its/
I changed it to /scripts/wgate/
I got the following Error :
Service cannot be reached
What has happened?
URL http://<IP>:8000/scripts/wgate//ZMIGO/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system RD1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:itdrd1_RD1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Please let me know what should be done to correct it.
Murali.

Unable to call Internet Service from EP IAC iview

Hi.
I'm trying to call a r/3 transaction with ITS from portal iview. I wan't to hide menu and toolbar, so I've created an Internet Service in SICF/SE80 with several parameters (webgui_simple_toolbar, ...). The service is activated and published. When I run it, Internet Explorer send me a 403 error.
I've tried to create an iac iview and links the service to it, but system return same problem.
ITS is ok, because I can run r/3 transaction from EP whithout any problem.
Any idea?
Thanks a lot!

Hi Edgar.
Service doesn't run from R/3 system. I've used ITS parameters "TRANSACTION", "WEBGUI", "WEBGUI_SIMPLE_TOOLBAR" and "GENERATEDYNPRO".
R/3 can't run the service and give a 403 error.
Service is actived and published, using SICF and SE80 transactions. Finally, I've run SIAC_PUBLISH_ALL_INTERNAL and all is good.
When service runs on R/3 system, I will build IAC iView on EP.
Any idea?
Thanks a lot.
Regards

How to eliminate Exit and Help links from IAC iviews....

Hi All,
How to eliminate the Standar Exit and Help links from the IAC iviews. i used webgui_simple_toolbar also but it didn't work. Is there any other way for getting rid of these links.
Thanks & Regards,
Ravi

Hi Barin,
I'm facing the same issue, i.e I've created IAC iview which display spool request(SP02). Now I want to hide title, menu in the iview. Could you please give me some info about creating templates in internet services.
Regards
Anand

IAC iview doesn't run when change to another and come back

Hi,
I've defined an IAC iview tha calls an ITS services (parameters ~webgui = 1, ~generatedynpro = 1, ~simpletransaction = 1, ~transaction = ).
First time I run this iview, it runs well. I run another iview and when I come back to the first one (IAC iview), it doesn't run, it shows me a r/3 screen that let me access r/3 menu, so it doesn't run my ITS service.
I'm using ECC (ITS integrated) and I'm not using SSO.
Any idea. All contributions will be appreciated.
Thanks a lot.
Best regards,
Iván.

Hello Iván,
I think you meant ~singletransaction right? If so please remove this parameter and try again.
Edgar

F4 help is not working in IAC Iview

Hi,
There is IAC iview for transaction PA61
F4 help is not working for the iview
it workes in backend SAP PA61
kindly give any hints what can we check
thanks in advance
b

Hi,
This might be due to the JRE version of the browser. We faced such issue and the update of JRE version in the browser helps to get the pop-up of F4 help. Check in the internet broswser Tools -> Internet Option -> Advanced. Check whether the JRE applet is checked or not. it has to be checked. if it is checked and even if you dont get the F4 help, upgrade the JRE version.
Thanks,
Mahendran B.

Error in creating IAC iviews

Dear All,
We are trying to create IAC iviews but getting error.
Environment details:
OS: AIX 5.3
DB Oracle 10.2.0.2(UC)
Application EP7.0 (SPS14)
Backend ECC 6.0 SR3
We followed the below mentioned steps:
01) Created one Internet Service ziactest in se80 with the parameters -
~transaction = tcode and ~generatedynpro = 1
02) Published the 'complete service' to the site INTERNAL.
03) Created one sub element under /sap/bc/gui/sap/its as ziactest
04) Modified the service ziactest as :
- specified "GUI Link" = Yes
- specified following GUI Configuration parameters:
~WEBGUI = 1
~SINGLETRANSACTION = 1
~NOHEADEROKCODE = 1
~TRANSACTION = tcode
~GENERATEDYNPRO = 1
- specifed handler as CL_HTTP_EXT_ITS
05) save & activated the service
When trying to test the service, we are getting a script error "Error on Page": wgu_global_eventhandler is null or not an object and the page displayed - is getting distorted . Also, system is specifying that: "The URL
http://gcbeccd:/sap/public/bc/its/mimes/system/page/menubase.html was not called due to an error."
When tried directly with the above url, the following error is getting displayed:
"The following error text was processed in the system RD3: The theme extracted from PAGE/MENUBASE.HTML has more than 2 characters."
Please note that: The SAP GUI for HTML has been configured and working properly. Also, the SAP note 790727 has been applied to resolve this problem but no result.
Any help in this regard will be highly appriciated.
Thanks & Regards
Sudip

Hello Sudip,
If the webgui service is working then there should be no reason for this to not work. By specifying ~webgui 1 you're actually not using any template you've created for the ziactest service. The URL should be:
http://gcbeccd:/sap/bc/gui/sap/its/ziactest
Please also try:
http://gcbeccd:/sap/bc/gui/sap/its/webgui?~transaction=tcode
Please also publish the IAC, WEBGUI and SYSTEM Internet Services from SE80 to the Internal ITS.
You should look at the developer trace (dev_w#) for the Dialog Workprocess that is used and reporting the error for more information.
Edgar

IAC iViews - Save old status

Hello experts,
I have a problem with the ITS Service in portal side. if I hace two pages, page1 and page2, and this pages are IAC iViews for the same ITS service, and I perform this steps:
1) open page1
2) press a button in page1, that will show more information
3) open page2
4) open page1
When I open the page1, in point 4, the status was not the same that I got when opened the iView for the first time, but with the content that I got after I press button.
How can I fix this? I want that, when I open the page1 in 4th step, I get the same content that in step1.
Can someone help me?
Thank you
BR
Joao

Hi,
Which transaction are you using on your ITS service? You can define two services, one for edit and another one for view. On first step you run first service and on fourth step you run second service.
Hope this helps,
Iván.

Problem when testing ITS (IAC) iView

Hi all,
I have created a service for a T-Code:SMEN.When I test this service I am able to see the 'SMEN' screen, but in the command box if I type any t-code, say "SE38".
The entire screen refreshes but it is not taking me to "SE38"..
I have complete authorizations for all t-codes.
In this service I have the below parameters:
Parameter Name value
~TRANSACTION smen
~GENERATEDYNPRO 1
I have created a IAC iView with this service and even in the preview of this iView, same thing happens.
Can any one give some direction in solving this ..
Thanks in advance
sethu

Michael is right - you should not be using an IAC iView, but a SAP Transaction iView with the SAP GUI type set to "Web GUI".
- Darren
<a href="http://www.fortybeans.com/">blog</a>

How to call IAC Iview from WebDynpro java code

Hi Team,
I am tring to call IAC Iview from WebDynpro Java code. we are passing value but blank page displayed and there is no error show on error log.
Below is Java Code which i am calling.
public void wdDoInit()
 try {
 String strURL = "portal_content/TestSRM/iView/TestSRM"; //WDProtocolAdapter.getProtocolAdapter().getRequestParameter("application");
 String random = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("random_code");
 //wdContext.currentContextElement().setRandomNumber(random);
//below we are call URL
WDPortalNavigation.navigateAbsolute("ROLES://portal_content/TestSRM/iView/TestSRM?VAL="+random,WDPortalNavigationMode.SHOW_INPLACE,(String)null, (String)null,
 WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String)null,(String)null, " ");
 } catch (Exception e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
I am passing value from URL.
http://<host Name>:<port>/webdynpro/resources/local/staruser/StarUser?random_code=111111111
when we call above URL we getting blank screen.
Regards
Pankaj Kamble

Hi Vinod,
read this document (from pages 7 ).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b5380089-0c01-0010-22ae-bd9fa40ddc62">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b5380089-0c01-0010-22ae-bd9fa40ddc62</a>
In addition lok at these links: (Navigation Between Web Dynpro Applications in the Portal)
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/ae/36d93f130f9115e10000000a155106/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/ae/36d93f130f9115e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/b5/424f9c88970f48ba918ad68af9a656/frameset.htm">http://help.sap.com/saphelp_erp2004/helpdata/en/b5/424f9c88970f48ba918ad68af9a656/frameset.htm</a>
It may be helpful for you.
Best regards,
Gianluca Barile

Passing values to IAC iview

Hi all,
any one have idea how to pass values to IAC iview from webdynpro...
i have purchase order screen i hvae to pass purcahse order and item no as parameter to IAC iview...
any one have any details document for creation of iAC iview

Hi,
WDPortalNavigation.navigateAbsolute should be solving the purpose.
This link might be helpful to you
http://help.sap.com/saphelp_nw04s/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
Regards
Santhosh

Passing Parameters to an IAC Iview

I am trying to fill in a field name for an IAC Iview. It renders the requested transaction, but doesn't fill out the field. I am using the ApplicationParameter property with an IAC Transaction iview.
In the ApplicationParameter field I just have one value: <fieldname>=<value>
I am able to get this to work using a web gui transaction iview, and it fills out the requested field ok. However, I have to use a IAC transaction iview because of its abiliy to hide buttons and the transaction box, so any clues as to would be appreciated.
Regards,
Tom

Hi Tom,
Please go through these thread, i m sure they will help you.
Passing parameters (input range/more parameters) to IAC Transaction iView
Passing parameters to IAC Transaction iView
http://help.sap.com/saphelp_nw04/helpdata/en/9e/7d9713087311d7b84600047582c9f7/frameset.htm
Regards
Atul Shrivastava
PS: Award points for helpful answer

IAC iview - Hiding Menu

Similar Messages

Maybe you are looking for