IAS with WLSM - now adding WiSM

Hi All,
I'm dealing with an existing Wireless network where,
- the Radius server is IAS.
- auth to AD behind IAS
- APs are autonomous 1231's
- there's WLSM's
We're adding
- WiSM
- 1242 Lighweight APs
Each WLAN has a static policy that applies to all clients associated
with an SSID. We don't want to do identity networking.
VSA'a are not being used.
Assuming I want to keep the same policies for wireless clients associated to new light-weight infrastructure as for the existing Autonomous infrastructure would I use the existing Remote Access Policy on the MS IAS and just add the WLCs as clients of it?
Thanks.

You are correct, that is assuming you want to use the same policies. Use the management interface ip on the IAS for remote client.

Similar Messages

InContext editing error: This region contains content with dynamic behavior added..

We just set up a web site with InContext editing following the procedures in Business Catalyst documentation to do that. But now when we go to the administration section of the site, and turn on InContext editing, it won't let us update the text. We receive an error message:
"This region contains content with dynamic behavior added..."
Does anyone know what causes this problem, and how to fix it?

Hi,
InContext Editable (ICE) regions can only contains static areas like text and static assets, it cannot wrap around javascript – populated areas or dynamic content like slideshows. (most likely causing the error)
ICE can edit only static page content such as regular HTML content. It cannot edit any element that is dynamically updated for example a div (or another element) which is manipulated (created or its contents are modified) by JS– populated areas or dynamic content like slideshows. It cannot edit menus, content holders or content outputted by system modules or tags either.
By default, on a page that has no ICE editable regions defined the editor attempts to find any regions you might want to edit and if possible make them editable. If it does not find the correct regions you want to edit you will need to explicitly define some editable regions.
Refer to this article on Defining InContext Editing editable regions - http://kb.worldsecuresystems.com/838/cpsid_83855.html?bc-partner
Hope this helps!
-Sidney

Fixed 5.2rc: ...images processed with PV2003 were adding a post-crop vignette...

From the release notes:
"Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5"
Does that mean all my PV2003 images (10,000+) now have a post-crop vignette included in their edit history? Or some? Or some special combination?
I converted my v4.4 catalogue a couple of days after v5.0 was released, so I really don't want to go back to my old v4.4 catalogue and re-convert...
Any ideas?

The "fix" works as follows:
1. If you use LR5.2 RC to upgrade a catalog containg some PV2003 images, there will be no issue....i.e. you will not see the unexpected "Post Crop Vignette Style: Paint Overlay" entry in the develop History.
2. If you open an LR5 catalog which was created by upgrading from an earlier version using LR5.0, any PV2003 images will STILL show the "Post Crop Vignette Style: Paint Overlay" entry in the develop History, BUT it will no longer have the problem of losing all intervening history steps should you click on a prior history step.
3. Any already-lost history steps caused by the problem in LR5.0 will remain lost.

[svn:fx-trunk] 10445: We're stricter with styles now, so this was not compiling.

Revision: 10445
Author:   [email protected]
Date:     2009-09-20 18:59:55 -0700 (Sun, 20 Sep 2009)
Log Message:
We're stricter with styles now, so this was not compiling.
Modified Paths:
    flex/sdk/trunk/samples/ja_JP/explorer/core/SimpleApplicationExample.mxml

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

I want to cut and paste iCal entries on iPad. Have seen a number of questions raised but no definitive answer - is it possible or not? (I use Bento but that doesn't sync with ICal now so can use that solution)

I want to cut and paste iCal entries on iPad. Have seen a number of questions raised but no definitive answer - is it possible or not?
(I use Bento but that doesn't sync with ICal now so can use that solution)
Hope to hear helpful news soon....
C

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?

Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon

The last update turned on iCloud. How do I get my calendar to sync with outlook now?

The last update turned on iCloud. How do I get my calendar to sync with outlook now?

iCloud wasn't on, I accepted iTunes offer to upgrade to 6.1.1.
Next time I went to sync through iTunes, iCloud was on.
Your advice appears to have solved my problem...for now.
Thank you.
Historically, the upgrade to 6.0 lost all of my contacts.
A manual restore brought them back.
Tech support said "Oh, that happens sometimes, you have to back up before upgrades", fortunately I do.
Again, thank you for the help.

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

Go back to the editor and close the photo there.

Backed up my ipod touch with itunes now all my audio books are in itunes but i cant put them back on my ipod. i have never used such a pathetic system as this. whats the point of buying books if you cant put them back on the ipod to listen to. help please

please help i have an ipod touch downloaded several audio books for it. backed up ipod and synced with itunes now the ipod has no audio books on it and they are in itunes but i can not get them back on to the ipod. apples systems are incredibly awkward. any other system allows for mp3's etc to be drag and drop not this long winded and what appears to be a complete waste of time. you buy things and once synced you loose it and cant put it back

Are audiobooks still configured to sync to your iPod Touch via the iPod's Books configuration tab in iTunes? To check, plug your iPod in and select it from under the Devices section in the left hand pane of iTunes. This will bring you to the Summary tab. Locate the Books tap along the top and select it. Here you can configure how and what audiobooks sync to your device.
Or if you want to manually drag and drop audiobooks onto your iPod, you'll have to enable the device for manual management. See here for more details.
Managing content manually on iPhone, iPad, and iPod
B-rock

I have a mac osX 10.5.8 and i could always make photo books with iphoto , now all of a sudden i cant because i have iphoto version 7.1.5 i have tried countless updates and nothing is working ? help ?

i have a mac osX 10.5.8 and i could always make photo books with iphoto , now all of a sudden i cant because i have iphoto version 7.1.5 i have tried countless updates and nothing is working ? help ?

Books are no longer supported with iPhoto '08 (a roughly six yeal old product) - you can purchase an iLife '09 DVD from someplace like Amazon or eBay and install it - iPhoto '09 is still supported this year
LN

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
=IF(I127,NOW()," ")
I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
If you want you can assign the service a keyboard shortcut in System Preferences here:
SG

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
I did evrey thing, but the same problem
reinstall SpeedBit, reinstall Mozilla Firefox.
So what can I do!
== This happened ==
Every time Firefox opened
== 4 days ago

look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
Therefore, Summary: Shutdown computer then turnoff router then turn both back on
Hope this helps anyone.

I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks

I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks
P.S -I have not taken any backup of those photos. So please suggest any software or any other method.

If those photos were part of the camera roll, they were part of the backup as well and you can restore from the latest backup you made on the old computer. After that transfer the photos to the new PC, follow this article: iOS: Importing personal photos and videos from iOS devices to your computer
Then sync again to the new one, which will erase the phone again.
You can also try to copy the backup folder from the old computer to the new one and see if the old backups get recognized, check this article to find the location on your PC:
Create and delete iPhone, iPad, and iPod touch backups in iTunes
If the photos were not taken with the phone, your data is gone, photos you sync from iTunes to the phone are not included in the backup.

Is the old HP-IB on a ribbon cable compatable with the now standard GPIB?

I have found a HP61001A and associated 61016, 61014 etc test equipment. It uses a ribbon cable to interface. Would anyone know if this is compatable with the now standard GPIB? Could it be used with some form of "connection converter"? Many thanks for any help.

Dave,
I recommend that you call HP to determine if the instrument is 488.1 compliant. If it is, then you can use GPIB boards (even 488.2 boards), but you must use 488.1 commands (such as ibwrt and ibrd). If the instrument is not 488.1 compliant, then you cannot use it with GPIB.
I hope this helps.
Kim L.
Applications Engineer
National Instruments

IAS with WLSM - now adding WiSM

Similar Messages

Maybe you are looking for