Setting recursive rights to folders as an Exchange admin

I have Users that have 100's of folders under one folder and I need to set rights to those folders to another user. I know that I can use
Get-MailboxFolder -Identity AttorneyA:\Cabinet -Recurse | add-MailboxFolderPermission -User SecretaryA -accessrights reviewer
but that only works for me if I am running this on my mailbox. An admin can not run this for other mailboxes. I don't understand how if I can make this work as an Exchange admin for another user. I thought maybe login as the user and run
it, but how do you run Exchange powershell as the user. We currently go to each folder and set these rights manually and there must be a better way.

Hi,
If you want to use the above cmdlet to add mailbox folder permission for others, the account you use to run the cmdlet needs to be a member of the following three role groups.
Organization Management
Recipient Management
Help Desk
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Public Folders on Microsoft Exchange

Is there a way to access public folders on Microsoft Exchange. This can be any version of ColdFusion and any version of Exchange. Right now I have CF9 and Exchange 2007, but we are looking to upgrade to CF10 and Exchange 2013.

UPDATE: (WORKING)
I tried Mihir's suggestion to change the ownership to the SERVERNAME$ for the objects within the CN=Microsoft Exchange System Objects container. I could not check the actual owner on any new folders as they will not appear in this container until they are
mail enabled. (Of which I cannot mail enable them)
On trying to change the owner from SYSTEM which is what it is on seemingly all objects, whilst I could select the Exchange server from the list, the setting would not take. (The SERVERNAME$ never appears in the list of possible owners after selecting it)
Instead I tested giving the Exchange Server (SERVERNAME$) full control permission on one of the objects/Public Folders. (Via ADSIEdit) This immediately allowed me to change as properties for the folder to include Send-As. (At last!!)
To fully resolve all permission issues, noting the Exchange server is a member of the Exchange Trusted Subsystem Group, I gave this group full control permissions on the CN=Microsoft Exchange System Objects folder and this resolved ALL permission issues
to include being able to create new folders, mail enable them etc.
No reboots/logoff etc were required, the settings are taken immediately. (Mileage may vary with replication)
Many thanks for getting me on the right track.

Is there a way to set extension specific download folders in safari? aka .docs to one folder, .mov to another, etc

Is there a way to set extension specific download folders in safari? aka .docs to one folder, .mov to another, etc
I'm trying to use safari to organize my downloads so i have less clutter and know where things are

Nothing "built in" senses file type and sorts by it that know of, and I've not heard of any third-party options.
You can have pretty good control by slight mods to how you download:
1--Set up a dedicated Downloads folder in Documents if you don't have one. Point all you browsers to that folder for catching downloads.
from here you have two options:
2A--always display that folder sorted by "Kind." That put files of similar types together
2B--within the Downloads folder, create subfolders for different file types. If you do this, instead of clicking files for downloading, right-click them. One of the contextual menu options the right-click will reveal is "Download Linked Files as...." and will force a dialog box from which you can select the subfolder that will hold that file type.

Public folders in hosted Exchange 2013

Hi,
Is it possible to setup public folders for a tenant i Exchange 2013, eg. with custom id 0 set or something like that?
Thanks!

Hi,
If you want to deploy public folders in an Exchange 2013 multi-tenant environment, you can create a public folder mailbox per tenant.
Here is a related thread for your reference.
Public Folder Hierarchy and PF Mailboxes for Hosted setup?
http://social.technet.microsoft.com/Forums/exchange/en-US/e9062abe-f484-462b-bc5e-ebdcb0862760/public-folder-hierarchy-and-pf-mailboxes-for-hosted-setup?forum=exchangesvradmin
More information about public folder in Exchange 2013 here:
http://technet.microsoft.com/en-us/library/jj552408.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How can i set no Right Click on Adf (jspx)

hi to everyone in this thred i have a cuestion ,
How can i set no Right Click on Adf (jspx)? i don´t find the solution for this event
i know a JavaScript to cancel RightClick but , are no how can i use in adf of Jdeveloper 11?
thanks ...

Hi,
there is no native API for this, so you will have to use JavaScript for this. What is the usecase ?
Frank

I am setting up up my new ipad 2. On the email icon I set up my work address thru Microsoft Exchange once I did that it did does noy give me an opportunity to see the other mail venues such as AOL or Gmail it automatically opens to my work address.

I am setting up my new ipad 2. On the mail icon I set up my work address thru Microsoft Exchange once I did that the mail icon automatically goes to my work address and it does not give me the choice of the mail icon again how do I get that back?

If you mean when you are reading email in the mail app.....
Tap on the word "Mailboxes" in the upper left corner of the mail app - next to the name of your Exchange email account. That will take you back to the list of all of the Mailboxes on your iPad.
The mail app will always go back to where you were when you left the app. So if you were reading mail in your Exchange account and then you leave the app (without quitting the app) it will take you back to that email that you were reading when you come back.

How can set direction right to left for horizontal text area

I want set direction right to left for horizontal text area
to view right to left String Type

I don't know that there is such a thing as right to left
String Type (I can't find one at least). I am assuming this
involves some language where printed materials are read from right
to left.
Before I try to offer a solution though, it will be helpful
to know more about that text area. Is the intention to type into
the text area or to load a string into it?
And if you are loading a string into it, is the string
already right to left?

Setting access rights at component level

I have created a component. The business wants to restrict its use to a certain group of users.
If a user is part of that group, ONLY then the coomponent should be available in sidekick at time of page creation.
How is setting access rights at component level being achieved?

As Jorg stated, Group ACL settings are meant to control access at a page
level. As he also stated is possible to control access even further, but
with additional effort and difficulty. But, nearly every client wants this
done down to the component level and on a group by group basis. So, what
I've found, over the years that works is the following:
- Configure the available components per template type per parsys
- Further configure the available components at the group level
For the custom built components, you can remove them at the group level by
un-checking the 'read' ACL on the dialogs for the given component. You
don't want to un-check read for the whole component because then the users
of that group experience random 'holes' in the content. But, if you
un-check 'read' for the dialogs, then the component will not display in
Side-kick (at least on 5.4 and prior this is the case).
The only caveat to this is the OOB components. That is where you will run
into a lot more difficulty. Those should mostly be enabled/disabled at the
design level for the entire page/parsys.
Hope this helps.
Todd

How to set up more mail folders for example "saved"?

I have an iPad 2. Question is: How do I set up more mail folders? All there is now is " in box, sent and trash".

This is one of the major limitations of Mail on iPad. To make things worse for POP accounts, the Inbox cannot hold more than 200 emails... I have been trying to save incoming email in the Sent mailbox, but this does not seem to work well.
Some of the unclear details:
https://discussions.apple.com/message/15210723#15210723
https://discussions.apple.com/message/15241396#15241396

900 photos on iPhone, 2000 photos read by iTunes. How to set this right so it wouldn't eat up my storage?

I have 900 photos on my iPhone currently, but iTunes reads it as 2000 photos eventhough I've already transferred and deleted my previous photos (w/c did amount to 2k before). It's eating up 4.91 GB of my storage, and I don't know how to set it right. I want to add music and update my iOS, but it tells me I can't because my "4.91 GB" worth of photos is eating up my storage. Please help. Thanks.

I had same problem .... no photos still photos holding up space on my device here is the solution
https://www.youtube.com/watch?v=8WT3Z0Hals4
Its because of new update on iPhone, Old photos don't Get deleted itself you have to delete manually…

Ignoring "Public Folders" when listing folders on an Exchange account?

hi-
i downloaded javamail 1.4.2 and ran the demo example "folderlist" against an exchange account i have using the "imap" protocol.
it listed all my folders correctly, including "Public Folders" and its subfolders.
i'd like to not list "Public Folders" though, and so was wondering if there is a programmatic way of ignoring this folder and any
other public folders.
when i run "folderlist" in verbose mode, i get for the "Public Folders":
Name: Public Folders
Full Name: Public Folders
URL: imap://exchange-user@exchange-host/Public Folders
Not Subscribed
Is Directory
IMAP Attributes:
\Noselect
is it appropriate to intrepret "\Noselect" as folders i don't want to include in my folder list?

Use the Store.get*Namespaces methods. You probably only want to list the personal namespaces.

Setting specific rights to a directory

I am trying to set specific rights to a directory and I cannot seem to get it like I want it. Here is the directory structure:
DIRECTORY-A
|
|_ DIRECTORY-B
|
|_ directory-1
|
|_ directory-2 (problem directory)
The user group has RF rights to DIRECTORY-A. That same group has RWCEMF to DIRECTORY-B and that seems to be working fine(also I have all checked in the Inheritance filter except Access control). What I am trying to do is allow the group to have all rights to directory-1 and all EXCEPT delete from directory-2. I want multiple users to be able to add, rename, delete and move files in directory-1 - so the rights are RWCEMF and that appears to work fine (also I have all checked in the Inheritance filter except Access control). My delimma is trying to get the users to be able have access to directory-2 like this the rights are RWCEMF (I have all checked in the Inheritance filter except Erase & Access Control). I want them to be able to move files into there and name them as they want. But once there, I do not want them to be able to delete from there. If I remove the Erase access right the users are blocked from saving files in the directory - which makes no sense to me. So I want the user to be able to dump things in there and once a file is there, they cannot remove the file or change the contents. Is there some combination of rights to get to this functionality?

If I remove the Erase access right the users are blocked from saving files in the directory - which makes no sense to me.
Are these MS Office files, by any chance? If so that's probably the problem - when Office saves a file it does a complex temp file-delete-rename dance , and you're probably tripping over that.

FSL-02007 Unable to set access rights of saploc.

Hello,
I am performing an installation of SAP ERP 6.0 EHP4 on Windows 2008 Server R2 along with MS SQL Server 2005 SP3 on a High Availability cluster.
I have completed the MS SQL Server 2005 into the first Cluster of MSCS. Performed the moving the MSCS groups of database, SAP and Cluster groups with success.
I created a shared file: sapmnt under the directory: E:\usr\sap for Everyone, & administrator with full access. The shared file was created as
SAPCLUSTER\sapmnt.
Then I started to execute the installation of Central Services Instance for ABAP (ASCS).
I logged as DECORCENTER.administrator, executed the command sapinst SAPINST_USE_HOST=DECORSAP
The installation has stopped after an error:
WARNING[E] 2010-10-25 16:59:51.285 [synxcfsexp.cpp:158]
           CSyFSExportImpl::setACL(acl)
FSL-02007 Unable to set access rights of saploc. SetNamedSecurityInfo: This shared resource does not exist.
Physical hostname of cluster is: SRVSAP01 y SRVSAP02
The cluster has three group resources:
ClusterGroup -> hostname: CLUSTERGROUP
ClusterSAP     -> hostname:CLUSTERSAP
ClusterDB       -> hostname: DECCENSAP
VIRTUAL SERVER -> hostname: DECORSAP
Let me know what I am doing wrong with this
Regards,
Rodolfo
Edited by: Rodolfo Neuhaus Wiese on Oct 25, 2010 7:26 PM

Ivan Bronner wrote:
Hi
>
> We tried the installation already with or without sapinst SAPINST_USE_HOSTNAME= "virtual hostname".
>
> Ivan
Hi,
Could you try to create "saploc" share manually and set share permissions to "Administrators, sap_localadmin" group, with full access? If you tried this before, did you face with a problem?
You should perform this activity with the same user that you've executed SAPINST
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Aug 24, 2011 11:33 AM

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010 . Please suggest ?
Aditya Mediratta

Hi Aditya,
please find the answer in
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
Please ensure you have a working mailflow from Exchange 2003 to 2010, vice versa, before you begin.
Basically it's the same procedure as adding some PF Database in E2K3; just
run .\AddReplicaToPFRecursive.ps1 -server "Exchange 2010 Server" -TopPublicFolder "\" -ServerToAdd "Exchange 2010 Server"
Wait until some initial data started to replicate; after that run
Update-PublicFolderHierarchy -Server "Exchange 2010 Server"
After replication has finished you can do a
.\MoveAllReplicas.ps1 -Server "Exchange 2003 Server" -NewServer "Exchange 2010 Server"
Please let me know if it worked.
Kind regards,
Martin

HT4859 If I got a new iPhone and backed up the data from the old one, it should show up once the new one is set up right? Does an "incomplete" status mean it did not back up and can not be restored to the new iPhone?

If I got a new iPhone and backed up the date from the old one, it should show up once the new one is set up right?
And does an "incomplete" status on iCloud mean it can't be restored to the new iPhone?
Help please

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

Setting recursive rights to folders as an Exchange admin

Similar Messages

Maybe you are looking for