IBook G4 makes 3 beeps and nothing else...
When I try to boot up my old iBook G4 it makes three beeps, the white sleep light flashes a few times and then nothing happens. The screen never lights up. It is plugged into a wall socket.
Is the computer just dead? Or can I boot up in a different mode?
What do the three beeps mean? Is it a death knell?
Thanks for any information!!
WW
To back up the previous info the following may be useful.
Just a query tho, your battery is in and shows what status (lights on test)?
RAM response
http://support.apple.com/kb/HT1547
You may find it useful to do this:
http://docs.info.apple.com/article.html?artnum=51850
To check that the RAM is seated (fitting) correctly see:
http://manuals.info.apple.com/enUS/iBook_G4_Mid_2005_UsersGuide.pdf
If you do not feel confident following the process involved then just take it straight to a competent Apple tech or SIG.
Swap out or borrow a compatible RAM stick to see if that makes a difference. You do not have to fully restore the keyboard, but beware of the metal backing frame that may angle down onto internal components.
If all the above reveals no change, then a full diagnostic by an Apple tech is your only likely saviour.
cheers
dave
Similar Messages
-
When I go to turn on my mac after i press the button it starts to beep and nothing else
nothing has happened to my computer to alarm me that something might have been wrong with it. So Im not sure might have happened to it when I tried to trun it on and it beeps very loudly and the small little power light on the front blinks. I have to hold the power button to get it to stop and I do this about three times before my computer will finally turn on.
Hello cupcakekisses,
Thank you for the details of the issue you are experiencing with your MacBook Pro. If you are hearing beeps, your Mac may need to be serviced:
If you hear beeps when your Mac starts up instead of the normal startup tone, your Mac may need to be serviced. To learn what the beeps mean, see the Apple Support articles below.
Apple Support article: Power On Self-Test Beep Definition - Part 2
OS X Mavericks: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH14206
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!
Here's the Apple support article on beeps https://support.apple.com/kb/HT1547
-
Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
I updated itunes and everything but nothings working and i just can't figure it out?
Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!Loop
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Dear Apple, why is not possible in the year 2014...sync to my iPhone just content I want to separety, without the whole sync procedur(backinup,syncing whole purchased things and stuff like that) When I want to have in my phone for example just 3 new songs ..I dont wanna wait 10minutes because of whole synchronization!!! I want add to my iPhone just these 3 songs thats it! Would be perfect, If you will make possible to sync just parts like MUSIC, Apps, Fotos, separetly and not alltime together...it s****!
Ok.
I have Windows OS and iTunes for PC, but the problem is not in my PC, but in synchronization. Your synchronization take minute or two, you have thunderbolt lightning cable??? If is it by you really so quick than ok but by me is it with sync really slow and I have still powerhouse notebook.
I dont know how is it possible that your sync is so quick, but my iPhone starts transfering purchased aplications and all content to the PC, instead of downloading it PC itself without iPhone from iStore. So there is what happend when I am conecting my iPhone.
When it find my iPhone on the first try, it starts makeing backup, than transfering photos, aplication, some info from Safari and to the end also the MUSIC...this should be improved by Apple and it should be able to sync just MUSIC section and not whole system, when I changed just something in MUSIC section(like adding new CD..)
So it does on PC whole resync Maybe is it somewhere in options, but where? I really want sync sometimes just MUSIC or just Apps and nothing else(like Photos, Bookmarks...)
I am sorry for that angry tone, but I am really stresedby this 20minutes sync or 10 miutes...just becouse of adding 1-2 songs, this is by competition phones quicklier :/ !
Message was edited by: Tenotitlan -
Why is my hard drive full when I'm only running the operating system and nothing else is loaded? No music, pics, nothing! I understand the hard drive is small at 60 gig, but I can't believe the os would take up that much space.
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal. -
HT1212 tried to reset phone on itunes but only has a picture on and nothing else
tried to reset phone on itunes but only has a picture on and nothing else please help i know nothing about phones
Update on the Fafard class action lawsuit involving the cancelled Itunes gift cards here:
http://www.courthousenews.com/2014/04/22/67224.htm
Apparently, although complaint there suggested involved Best Buy only, it was the intermediary used by Apple that cancelled the cards not either Best Buy or Apple itself. Settlement would reinstate (make active) old gift cards. -
IPod Adapter icon appears and nothing else happens HELP
i got this ipod and all of a sudden a picture (icon) appears on the screen its a picture of a ipod Usb port adapter and nothing else happens its stuck there if anyone knows what to do please help.
ThanxIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Using HP Officejet 6500 E709a Series with Windows XP SP2.
When I try to print a FileMaker Pro file I get 3 fast beeps on my printer and nothing else. Nothing in queuve. Have tried turning off printer and computer.
The odd thing is that I can print another FM Pro doc from a different folder so I am not sure if this is a printer problem or a FM Pro oddity.
But, what do the 3 fast beeps from the printer indicate.because they are needed to detect your player, that is!
just try it out, you'll do no harm by doing so -
my autofill stopped working recently. I looked under preferences and all the necessary boxes are checked. When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.
Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Press the down-arrow key. (Credit to ASC member iNeight.)
2. Quit and relaunch Safari. Force quit if necessary.
3. Click in the first field to be filled, and then select
Edit ▹ AutoFill Form
from the menu bar. You may have to reload the page in order to do this.
4. Select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
5. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar.
6. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
7. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
8. Run Software Update and install any available updates. -
I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.
Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire. -
About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.
Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved. -
Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.
If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!
Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit -
When I click on the icon for firefox, a little toolbar (the one you see in the top right corner of the screen) pops up and nothing else happens. I'll close it out and retry, with only the same results. I tried Firefox safemode, with the same result. Like there is something blocking me, but I don't know what. It doesn't matter if I've been on the computer for some time or just started up, I cannot access the web thru Firefox. This has only started in the last couple days. Previously, I've never had this problem. I haven't loaded any new programs anytime recently to account for this. I use Norton for my anti virus program which is the newest and had since end of December. I am not happy having to use the windows internet explorer, so would be very happy to get this resolved. Should I uninstall the mozilla program, and then reinstall it?
"I have an ethernet cable in port 1 on my computer. That is configured manually to access ther office network."
Do you have a "real" IP address or a private (192.168.x.x, 10.x.x.x, 172.x.x.x) IP address?
"The wireless router was connected to the company server only for the purpose of getting me online through Airport because I couldn't access it using an ethernet connection"
Could not access it because their network security blocked you by intent, or had some unknown technical difficulty?
Unless you are blocked by intent or ommission (if they have to explicitly allow your machine) I can think of no technical reason why your wired connection should not both get you on their network and on the internet in general. You should not need to be dual homed (though dual homing should work as well).
Please answer the questions above when you can - I think solving the wired LAN issue will be easier if you are not being intentionally blocked.
Maybe you are looking for
-
I don't know if they just got my stuff from before and are just seeing it now or if they still are getting my information. I don't have anything to hide but it's awkward knowing other people are seeing all you are downloading and even messaging. I
-
Dreamweaver 8 Design View render issue
I was wondering if anyone else has noticed a highly irritating issue with DW8 that is apparently not an issue in the Design View of DW MX 2004. In DW 8 for some reason I'm getting an extra 150 pixels of white space to the right of my #content contain
-
ICE adds "xml" extension to transported content
Hi all, We migrate KM content from EP6 to EP7. We use standard repository "/documents". When we transport documents the target portal identify them as xml files and doesn't open them. See snapshot: http://img401.imageshack.us/img401/1756/65621006tj1.
-
Update 1 on Lumia Cyan. When will it be available ...
I've updated my Lumia 1020 to Cyan. I was using WP 8.1 Update 1 and realized the features of update 1 are not available on Cyan (like tiles folder). Does anybody knows when Nokia will make this update available ?
-
Installed reader many times. Still cannot get pdf files. Cannot print statements or bills. Help!
Installed reader software numerous times. Still cannot get pdf files to open so I can print bank statements and bills. Help!