ICACLS creates two entries instead of one

I am using the command ICACLS to create permission for one user on the drive d:\. I use the following syntax.
icacls d:\ /grant "wkusr":(X,RD,RA,REA,RC) /T
icacls d:\ /deny "wkusr":(AD,WA,WEA,DC,D,WDAC,WO) /T
Instead of creating one entry in the Advanced Security Settings of drive D:\ I have two, one for the Allow and the other for deny. How can I have only one entry?
Or does the above commands do exactly what I need no matter if I have one or two entries?
Thanks

Hi Louis,
Do you mean tow permissions on one user in security->advanced->Permissions Tab?
It is very normal because this is different type of permission modification. There will be tow entries even you grant permission by using GUI, it will be shown as two different permission in advanced->Permissions Tab (deny and allow). These two entries
will do its job fine.
If the commands has conflict, the new one will replace conflicts part in the older one.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

When typing an email, when I go to next line, it skips two lines instead of one line. How do I correct it?

I was typing an email and when I would go to the next line, it will skip two lines instead of one line. How do I correct the problem?

I am not sure I understand the problem. Could you include a screenshot of it right after it happens?
If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Producedure givng two rows instead of one row

Hi
Please find below my procedure..when I execute this proc...displays two rows instead of one row. Please help me incase if I did mistake.
CREATE PROCEDURE SP_CWCTravel_Cruise_Amenities_S(
        @Cruise_Line_Code varchar(2500) = NULL,
        @Ship_Code varchar(2500) = NULL,
        @Sail_Id varchar(100) = NULL,
        @Base_Price decimal(8, 2),
        @Category_Groups varchar(2500) = NULL,
        @Categories varchar(2500) = NULL,
        @Rate_Codes varchar(2500) = NULL,
        @Booking_Date VARCHAR( 10 ),
        @Sail_Start_Date VARCHAR( 10 )
AS
BEGIN
    SELECT TOP 1 *
    FROM CWCTravel_Cruise_Amenities_Definition as cad
                                JOIN CWCTravel_Cruise_Amenities_Definition_Date_Range AS caddr
                                ON cad.id = caddr.Amenities_Definition_Id
    WHERE Cruise_Line_Code in (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Cruise_Line_Code))
        AND (Min_Base_Price = 0 OR Min_Base_Price <= @Base_Price)
        AND (Max_Base_Price = 0 OR Max_Base_Price >= @Base_Price)
        AND (Ship_Code IS NULL OR Ship_Code = '' OR Ship_Code IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Ship_Code)))
        AND (Sail_Id IS NULL OR Sail_Id = '' OR Sail_Id IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Sail_Id)))
        AND (Rate_Codes IS NULL OR Rate_Codes = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Rate_Codes)) A,
                                                                                   (SELECT REPLACE(REPLACE(Item,'?', '_'), '*', '%') Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Rate_Codes)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (Category_Groups IS NULL OR Category_Groups = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Category_Groups)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Category_Groups)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                AND (Categories IS NULL OR Categories = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Categories)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Categories)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (@Booking_Date is null or @Booking_Date=''
                                                                                                OR (( caddr.from_date IS NULL OR caddr.from_date <= @Booking_Date ) AND ( caddr.to_date IS NULL OR caddr.to_date >= @Booking_Date )
                                                                                AND (( caddr.date_range_type IS NULL ) OR ( caddr.date_range_type = 'BOOK_DATE' ))) )
    union
    SELECT TOP 1 *
    FROM CWCTravel_Cruise_Amenities_Definition as cad
                                JOIN CWCTravel_Cruise_Amenities_Definition_Date_Range AS caddr
                                ON cad.id = caddr.Amenities_Definition_Id
    WHERE Cruise_Line_Code in (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Cruise_Line_Code))
        AND (Min_Base_Price = 0 OR Min_Base_Price <= @Base_Price)
        AND (Max_Base_Price = 0 OR Max_Base_Price >= @Base_Price)
        AND (Ship_Code IS NULL OR Ship_Code = '' OR Ship_Code IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Ship_Code)))
        AND (Sail_Id IS NULL OR Sail_Id = '' OR Sail_Id IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Sail_Id)))
        AND (Rate_Codes IS NULL OR Rate_Codes = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Rate_Codes)) A,
                                                                                   (SELECT REPLACE(REPLACE(Item,'?', '_'), '*', '%') Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Rate_Codes)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (Category_Groups IS NULL OR Category_Groups = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Category_Groups)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Category_Groups)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                AND (Categories IS NULL OR Categories = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Categories)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Categories)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
        AND (@Sail_Start_Date is null or @Sail_Start_Date=''
                                                                                                OR (( caddr.from_date IS NULL OR caddr.from_date <= @Sail_Start_Date ) AND ( caddr.to_date IS NULL OR caddr.to_date >= @Sail_Start_Date )
                                                                                AND (( caddr.date_range_type IS NULL ) OR ( caddr.date_range_type = 'TRAVEL_DATE' ))) )
    ORDER BY Cruise_Line_Code DESC, Ship_Code DESC, Sail_Id DESC, Rate_Codes DESC, Category_Groups DESC, Categories DESC
ENDWhile executing this SP
I am getting the following results.
2043 23-07-2010 AM 11:22:10 23-08-2011 PM 04:57:19 8 princess caribbeanPrincess 2043 20-08-2011 AM 12:00:00 30-11-2011 AM 12:00:00 BOOK_DATE
2043 23-07-2010 AM 11:22:10 23-08-2011 PM 04:57:19 8 princess caribbeanPrincess 2043 01-10-2011 AM 12:00:00 30-11-2011 AM 12:00:00 TRAVEL_DATE
I need only the first record.
Thanks in adv
Rekha

871270 wrote:
Hi
Please find below my procedure..when I execute this proc...displays two rows instead of one row. Please help me incase if I did mistake.Seriously?
You wrote a query against tables we've never seen, containing data we can't possibly have any idea about and you expect us to be able to help you?
Please go discuss this with someone in your organization who understands the data model and have them explain to you how it is supposed to work.
Put yourself in our situation (forum volunteers) ... if we threw some arbitrary code with no explanation as to what it does, what the data model looks like and what's supposed to be happening, do you think you'd be very successful ?

Is it possible to create two apple ID on one iTunes account?

I bought my wife an iPod Touch, how can I keep my contacts seperate from hers?

Phil, I am confused about your statement/answer:
""Is it possible to create two Apple IDs on one iTunes account?"
Yes. I have two."
Apple says:
"An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID."
Thus an Apple ID is the same as the iTunes account.
Did you mean can yu use more than one Apple ID on one iPod because yuo know the answr is yes.
Or have I go something wrong?

How do you create two apple ids for one email address.

I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

Donnathemom wrote:
Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that.
Get her an email address, even if she never uses it. They're free and available almost everywhere. The only requirement is that the address be a valid one.
Edit...
You can even use an "alias" of yours. That's a fake address that actually sends everything to you. Check with your current email supplier.

Obiee 11.1.1.6.6 - analysis displays two dates instead of one prompted

Hi all,
my analysis somehow displays two dates instead of one prompted.
How can it be?
Tell me please what additional information should I include for you to help me.
obiee 11.1.1.6.6
Upd: prompt screenshots
http://marchello.ccx-grads.org/img/BI_prompt_001.png
http://marchello.ccx-grads.org/img/BI_prompt_002.png

This is from "Administration" -> "Manage Sessions" section of obiee
1) everything seems fine, WHERE clause shows correct date
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
WHERE
(CAST("VBIREP8"."ARCDATE" AS DATE) = date '2013-08-15')
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
2) and now attention, I press "next rows" arrow, my WHERE clause is simply ABSENT!
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
Sure, I receive another date (01.02.2013). Just one thing is strange here - why do I receive only one extra date (I should receive ALL dates in Oracle table when I perform query without any WHERE clause).

I created two Aperture libraries from one large library. Some of the photos in library

I created two Aperture libraries from one large library. Some of the photos I want to keep in library #2 are in the trash of library #1. If I empty the trash of library #1, will it affect the same photos that were moved to library #2? I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.

Are your images referenced or managed? If your partial libraries are referencing the same original files as the library you exported them from, be careful. Deleting the orignal on one library #1can delete it from the library #2. But if your originals are managed by Aperture inside the Aperture library, you can delete them.
I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.
If you are not sure about referenced or managed, select one of the images you want to keep in the library where they are not in the Trash, then use the command "File > Show in Finder". If you can reveal them in the Finder, they are referenced and probably are shared between your libraries.
Or turn on "badge referenced files" in the Preferences > Appearance settings. Then your referenced images will show arrow badges.

Two rows instead of one in the database when form with 2 data blocks.

Hi All,
I have created a form having 2 data blocks
data block one to populate table A
data block two to populate table B .
now when i save the data after pressing the save option ....i find 2 records instead of one in the database table A and Table B.
it should have been just one per table ....can some one suggest pls
Sunny

ok : step by step :
do you have a trigger created named "ON-INSERT" on
the block?Many thanks for your support....
I do not have an ON-insert trigger.....
I will explain my scenerio.....
I have 2 data blocks one-below the other in the form
accessing 2 different tables....
now on the canvas of this form I have added a
button....and on that button i have written a trigger
'when-button-pressed' Trigger....
it takes the data from the various text_items of the
form and inserts them into their corrosponding
tables....and I have added 'COMMIT' at the end this
trigger
so when I press this button ....the data 2 records
get inserted into the 2 tables instead of one each..
TIA
Sunnythe above form looks something like this.....
-------------------------------------------------------------------------------------------------------|
|------------------------------------------------------------------------------------------------------|
| |
| ---data_block1------------------------------------------------------ |
| | | |
| | some data entry here for emp1 table | |
| |__________________________________________ | |
| |
| |
| |
| ---data_block2------------------------------------------------------ |
| | | |
| | some data entry here for dept1 table | |
| |__________________________________________ | |
| |
| button1 |
|-------------------------------------------------------------------------------------------------------

Trying to create two login areas for one site

I'm currently creating two different login areas for the site. One for my client to update content and one as a media/press area for downloads. Both areas work fine but it seems I can only do one login area because even if I use a different Connection script, one login area overtakes the other and you
're stuck with one setup instead of two. How can I work this so each area has its' own separate login area?

Instead of having two login forms, have one login form and utilize the user level controls. You will need to go to the login settings page and set/use the Level field on the database tab and then configure the user levels on the user levels tab.
You simply route users to different subdirectories and then secure the files for those two user directories using different user level permissions.
This removes the needs to maintain multiple connection files.
That said, do your two different login forms have different names? Different ids? Different targets/actions?

I want to use two separate Lion Time Machine backups and use them to create two separate profiles on one new computer

This is something I need to do temporarily but I must do it.
I have an iMac 27 (end of year 2009) I5. It has 1 TB internal and I want to replace it with a 2 TB internal.
I have time machine backups on an external hard drive that has been connected via Firewire.
I have another iMac (my son's)Imac 24 Intel Core 2 Duo that has it's own separate Time machine backup to it's own separate firewire connected external drive. Both machines are completely up to date with the latest version of Lion and all other necessary software updates.
When the internal hardrive is replaced - I want to use my latest time machine backup to create one profile on the imac and then use my son's latest time machine back up for a second profile. The end goal being to have everything from my current set up ie: apps, documents, itunes, etc existing in one profile and everything in my son's current set up existing in the other profile. We can both be administrators for the time being as well. I should note even though we both have some of the same apps, we both also have other apps that the other does not.
My profile will be using about 900 gigs of total space.
My son's profile will be using about 250 gigs of total space.
This is temporary until the new iMac is released. Then I will want to transfer my profile to that leaving my son's intact on the iMac 27 I5.
I realize that during the temporary period that Time Machine will be making backups of this entire two profile setup, which I am now understanding as I write this will create a new issue for me when I want to transfer only my profile to the new computer as well. But one bridge to cross at a time, I guess.
I need to do this because we must bring his current computer to my father - as his iMac G5 is inoperable. We have been doing this round robin hand me down in our family since IMac DV special edition :-)
Any insight on this would be greatly appreciated. And any other suggestions as well.
Thanks very much.

Hey Shootist000, Thanks for the replies. First off, I am actually okay if we both have each other applications so I am not concerned about that. It is still unclear from what you have said as to whether I can in fact, use these two separte time machine backup to create two separate profiles on the new hard drive. If that in fact can be done, then - will it create two copies of the apps we both have in the ROOT of the drive as well as placing all the ones we each have separately?
And reading your second reply, makes me think that maybe the partition is the way to go to begin with and then down the road - after I am in the new iMac, I could reformat the iMac 27 with only one partion and restore my son's latest back prior to the reformat thus giving him full access to the 2 TB of the drive.
If this is still making sense, does this mean :
replace the 1TB with a 2TB - but have it partitione - 1.5 TB & 500 GB.
Install(Restore using Time Machine) my latest back up prior to the 1.5 partition
Install (Restore using Time Machine) my son's latest back up prior to the 500 gig partition
Lastly, in order for us both to be using the partioned computer - I am assuming Switch user can no longer be used - so would we need to restart and select our respective partions in order to use the computer? And if so, how would we each be able to be using time machine to back up - two separte external hard drives - with each one dedicated to only one partition? Or ?
Thanks so much.
Ironically, I am only trying to do this so that I don't need to manually install all his apps, setting, games, blah blah for this temporary period. :-)

Showing report data columns into two rows instead of one row using SSRS 2012

Hi All,
I have a ssrs report with 13 columns and I want to show those 13 columns data into two rows instead of showing in one row. please send me step by step process.
id     fullname     firstname      lastname        mailingaddress     billingaddress
city       state       zipcode
1       ABC                A                  C
    xyz                      xyz123                   york
PA         12345
homephone     cellphone          workphone          company
1234567890      4567890123    0123456789         ABC,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
2        XYZ               X                  Z
     abc                     abc123           lewisburg
PA      54321
homephone     cellphone           workphone        company
4567890123      0123456789     1234567890         xyz,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
3       BCD                  B                  D
123abc                 xyz123               leesburg       PA
54123
homephone     cellphone          workphone        company
4567895623      0783456789     1238967890      Hey,Inc
Thanks in advance,
RH
sql

Do a right mouse click on the left, gray row marker => "Insert Row"=> "Inside Group
- Above or Below", then you get a second detail row.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Create two identical idocs from one input file with BPM

Hello all .
My issue is the following.
I have a scenario where an input file is mapped to an IDOC .
The problem is that i need to create a second - almost identical - mapping to the same IDOC type and when the input file is receive both of them should be sent .
I suppose that BPM is needed for this scenario, but are there any examples or tips i should follow?
Thank you all in advance .

Rucinski and Sarvesh, thank you both for your answers , they are very helpful.
I have started trying Rucinski's method, because I would better avoid redoing the mapping on the second IDOC (it is pretty hard and critical) . But I have a problem.
When i run the senario, the system replies (for the second IDOC)
"Unable to interpret IDoc interface NEW_IDOC_MI"
The reason for this is that in the Interface Determination i have two entries for the inbound interface,
Orders.orders05 and
NEW_IDOC_MI,
which is wrong. I should be using the original Orders.orders05. But this can't be done, because in tha case the Interface Determination, requests a Condition to be entered. Any suggestions on this ?
Sarvesh, is there any way to duplicate the IDOC, keeping the mapping that is allready done ?

Can we create two different forms in one program

Hi Experts,
i have to create a smartform in which there is two type credit and second is invoice.If the type is invoice then open a different form in size also and if it is credit then open a different form . Is it possible that we can craete two different forms in one program.can hide the form according to type.

Hi
Yes u can just simply
START-OF-SELECTION.
PERFORM CHECK_INVOICE.
For Credit Memo
IF W_DOC_CAT = 'O'.
    PERFORM GET_HEADER_DATA1.
    PERFORM GET_DATA_ITEM1.
    PERFORM GET_FOOTER_DETAIL1.
    PERFORM GET_HEADER_TEXTS1.
    PERFORM DISPLAY_SMARTFORM_CREDIT.
ENDIF.
For Debit Memo
IF W_DOC_CAT = 'P'.
    PERFORM GET_HEADER_DATA2.
    PERFORM GET_DATA_ITEM2.
    PERFORM GET_FOOTER_DETAIL2.
    PERFORM GET_HEADER_TEXTS2.
    PERFORM DISPLAY_SMARTFORM_DEBIT.
ENDIF.
try and

Email to MMS on iOS 6 shows two senders instead of one?

I've been using a group email to forward messages to several recipient's email and MMS. Ever since upgrading to iOS 6, the users with iPhones receiving the message through their carrier's mms email ([email protected] for example) show that the message was from two people, and not one. It shows as coming from myself, and then also the address that the original message was sent to (ie. the group email). The problem is, if they reply, the reply is sent to the entire group of 30 people instead of just me. Didn't have the problem before the update, but it is consistent ever since. Any idea how to overcome this? I've tested out iPhone 4, 4S and 5, with iOS 6 and 6.0.1.

I have the same issue - the new folder appeared in the Videos app on the iPad when I downloaded How I Met Your Mother season 6 episode 3 directly on the iPad. Previously I had downloaded episodes 1 and 2 on my Mac, and then transferred them to the iPad doing a Sync in iTunes. So now I have two icons for Season 6 of How I Met Your Mother in the Videos app on my iPad: one with episode 3 that I downloaded on the iPad itself, and one with episodes 1 and 2 that I downloaded on my Mac. Both have the same folder name, and both have the same icon for Season 6.
Were you able to resolve the issue? A complete reboot of the iPad did not resolve the issue for me.
Many thanks,
Pete

Creating two itunes libaries on one computer...

Can any one tell me in simple terms how to create two itunes libaries for different ipods on one computer?? Both ipods seem to go into the same library when over I connect!
Thanks in advance..
Dell Windows XP

If you want to have two completely separate iTunes libraries, you will need to have separate Windows user accounts.
To use multiple iPods with a single iTunes account, look here:
How to use multiple iPods with one computer

ICACLS creates two entries instead of one

Similar Messages

Maybe you are looking for