ICal in endless update loop ?!?!

My HOME calendar is shared between several devices, two of which use separate email addresses. On these deveces I get the blue box which states: HOME - This calendar is now public." I click OK to dismiss it, then 30 seconds later it reappears. This goes on, and on, and on.......and on....and on....
Anyone else have this problem or know how to fix it?

same problem here!

Similar Messages

Endless Installation Loop...

Hey,
So, I went and started up boot camp and installed Windows XP Pro (SP2), it said the installation was a success. However, when I restart my computer (without holding option), the screen goes black and boots into windows. Windows then says "PLEASE INSERT SYSTEM DISK AND PRESS ANY KEY TO CONTINUE". When I do, it starts up the install prompt and does the whole thing over again. I have tried numerous partition types (NTFS, FAT32, Leaving it intact, etc.) with no success. Also, when I try holding option, the system ignores me and does its endless installation loop again. I have to hold 3 keys (I forgot what they are, but that's not important) just to get it to boot back into OS X.
So, what do I have to do in order to run Windows Successfully? I have also tried many different install disks, still with no success.
Do you think upgrading my Boot Camp Assistant will help?

The only boot camp assistant version is 2.0 for mac. Boot camp only updates to 2.1 on the windows side. You can try redownloading bootcamp assitant for mac or reinstall mac os again maybe something is wrong?

Macbook pro endless startup loop

This is weird.
My Mac book Pro will not startup but goes into an endless startup loop, shutting down and trying to start over and over.
I cannot archive and install from 10.5 disc.
But when I insert the 10.4 disc and restart twice my regular 10.5 comes up and acts ok.
Anyone with a clue?

this is the kind of problem I've been having with a 4 day old MB 2.2, 13", 10.5.2. I really don't want to have to buy disk Warrior, though a great product and have several versions over the years (has saved my butt more then once). I am thinking the problem is somewhere between parental controls (which I have on since this is my daughters computer and is the startup account) and maybe spot light doing its initial indexing but never quit getting finished before computer is shut down.
I have reinstalled from disk that came with computer 10.5.1 and done all current updates to 10.5.2, 4 times now at a cost of about 4hrs per install. Can not install and archive, get an error message. Applecare could not help - tried resetting pram and tried reinstalling system. Can't boot into minimal system startup. Disk is o.k. per disk utility.
I've seen many posts regarding parental control problems and some regarding endless start up but not both together. Anyone have thoughts of other things to try? Anyone think the two might be related? Computer will be going back in next 24-48hrs if problem isn't resolved

Windows Update Loop - Win 7 Pro - x64 :: Error 80071A91

Hi, I've been referred to this forum by the Microsoft community from this post: answers.microsoft.com /en-us/windows/forum/windows_7-system/windows-update-loop-win-7-pro-x64-error-80071a91/b17c5bc5-7977-4f8b-9b45-ecb265886381 (same as below)
Any assistance is appreciated. dave_ned at hotmail.com.
Hi,
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again"
I've got the error (80071A91) that others have experiences while trying windows update and for the life of me I cannot get the updates to install.
Looking for the past 4 hours via Google, trying different recommended things and still no luck
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-f964-4376-bfab-2f29ea127c6a
# SFC /scannow causes the "repair status message" and asks for reboot.
I've downloaded fix-it, tried booting into a system repair/restore disk using command line to run
#sfc /scannow /offline....
using the dispart to LIST VOLUMES (based on this http://mikemstech.blogspot.com.au/2011/12/how-to-perform-offline-system-integrity.html )
I've tried #fsutils resourse set autorevert=true (or something, can't find the exact post as I've rebooted so many times)
I've tried dismc.exe (or similar without success)
Basically I'm stuck with these updates (~10 of them) always sitting there downloading, installing every time I shut down the PC.
Running a system repair disk created in windows still does not allow #sfc /scannow....
My Last system restore was 04/08/14 and I cannot even restore the system to this point as the restore fails and asks to remove itself once I restart the system.
Details:
OEM version of windows purchased legally and genuine microsoft logo in system dashboard.
Intel Core I5 -3330
16GB RAM
Windows 7 Pro - 64bit OS
Service pack 1
**NOTE** I have the C drive hooked up in RAID 0. Two(2) * 60GB SSD disks in RAID 0 used as C: via BIOS RAID
Secondary storage disk a D:
Been working and updating fine for the past 5-6 months.
I have the Optical drive setup as O: and a Daemon tools virtual drive as drive E:
While running DISKPART and using LIST VOLUME I see this:
currently the system seems to have lost all update history
Any information or help on this is appreciated. I don't want to reformat and reinstall, I don't really want to 'repair' and wipe my current software installation so I'm hoping there is a way.
Anyway I can get the 'pending state' removed.?
Thanks in advance
David

Hi, I've rebooted into Repair mode (Console), (because repair said windows is installed on E:) run dism.exe /image:E:\ /cleanup-image /revertpendingactions
This gave a message about small scratch space but did say something out a fix. Upon reboot into safemode with console I received the same message
"C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
I then rebooted and tried SCF again, no luck... Same message, same updates still sitting there.
Partition info: (as mentioned earlier C is in RAID 0 with 2 SSD disks)
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 O DVD-ROM 0 B No Media
Volume 1 E DVD-ROM 0 B No Media
Volume 2 System Rese NTFS Partition 100 MB Healthy System
Volume 3 C NTFS Partition 111 GB Healthy Boot
Volume 4 D GB320 NTFS Partition 298 GB Healthy

HP MediaSmart DVD player: sp49489 doesn't seem to fix blu-ray player "update loop"

Good day,
I found a few threads were folks were having issues playing back blu-ray discs (BD) with HP MediaSmart (some going so far as saying things like "... not so smart", etc). I applied update sp49489 and one BD worked fine, and now I am attempting to play a more recent BD (ie, "Stolen") and I get stuck in a "update loop" where the HP MediaSmart DVD player constantly asks to check for updates, whether I hit "yes" or "no".
Any ideas how to fix this?

The first link leds to a cyberlink page where i can't continue because theres nothing to click on.
mediasmart is up to date with me, but the cyberlink BR advsor means my laptop doesn't habe a BR Player neither a software.
i'm using Win7_64. Any suggests?

IPAD 2 is wiped and in endless restore loop with 5.1

I downloaded and installed iOS5.1 about 7 hours ago after being prompted on both my iPad2 and iPhone4S via WIFI. No problem with the iPhone,works great. However, when the iPad rebooted it told me I needed to restore the device, which I attempted to do so over a dozen times on two differnet PC's (office and home) and each time I get an error "The iPad "iPad" could not be restored. An unknown error occurred (1)." I have checked many forunm and sites for help. I tried everything that Apple and other posts suggested but no luck at all in the endless restore loop.
I am really shocked that Apple would release this IOS 5.1 disaster out with any real help or guidance. The worse part is the erasure of all data on the device, including the device name. The ITunes window can't even identify the capacity or serial number. What a cluster.

In case anyone was wondering how this was resolved, I had to ring Apple Support. Secondly, this problem was compounded by the fact that I only backed up to the Cloud, not my PC. Stupidly, on my iPad after it lost all it's data, I clicked on 'sync to the Cloud', which overwrote my good backup.
I had to set my iPad in iTunes up as a new iPad, and move everything back over. From now on I am only going to sync to the PC.

Windows 8.1 update looping

Since Tuesday my computer (HP ENVY 14-K010US SLEEKBOOK) is in an update loop. It updates, restartes, undoes the updates and the loop starts all over again.
Anybody else with this problem?
Is it safe to stop automatic updates and what is your recommendation I should be doing?
Thanks!
Helena G.

Hi Helena,
Welcome to HP Forums
First do a System Restore to a previous known good point (at least 48hrs before the update happened):
See "Restore your computer when Windows 8 cannot start normally" section in this -
http://support.hp.com/us-en/document/c03327545
Next change "automatic" Windows Update from Control Panel to "To Check for Updates Automatically but Let you Choose to Download and Install them or Not" :
http://www.eightforums.com/tutorials/5794-windows-update-automatic-updating-turn-off-windows-8-a.htm...
May be the Microsoft Tuesday update patches is causing the problem.
Next to rule out any hard drive issues causing this, Do a complete - quick & extensive hard drive testing from BIOS :
http://support.hp.com/us-en/document/c03467259
Wait for all the tests to complete. It'll take time.
If it PASS all the tests,
Next: execute a System file scan - Option 2 in this tutorial:
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-windows-8-a.html
Restart system.
Then, execute dism commands given in Option 1 in this tutorial:
http://www.eightforums.com/tutorials/26512-dism-fixing-component-store-corruption-windows-8-a.html
Restart system.
Now, Completely disable/uninstall all the Antivirus softwares including Windows Defender from your system temporarily
Now you manually install available Windows updates in batches of 5 or less instead of everything as a whole.
Restart system after each batch installs.
Install the Important & Recommended updates.
You can leave any optional updates that becomes available in your Windows Update without any worries.
Restart system after everything finishes. Check.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

ICloud Setup on Mac post Mavericks upgrade results in endless do loop

iCloud Problems
So you open Internet Accounts - and delete from internet accounts [email protected] (can’t logout)
The dreaded account is gone……..
So now back to System preferences and into the iCloud icon to set User [kaiserja] as default iCloud account and cure the ills of the world.
You go back to internet accounts and get —
Ahhhh grasshopper, we have endless do loop here. Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?

Rebuilding in this system, so when trying to sign in to iCloud to set up
Proper data entered and the window goes away but nothing happens
Conclude issue is with iCloud setup, so to system preferences and iCloud we go
From there we get sent to internet accounts, after clicking internet accounts, we see the screen below and delete the inactive [email protected]
(BTW have no idea what inactive means. account functions on iPhone, iPad and iCloud over safari)
After deleting the offending user account, we see
All gone so all should be golden, no? So returning to iCloud set up, we get
and opening Internet accounts and entering our apple id leads us back to here....
an obvious and not very helpful statement as I use this account on multiple devices, but just deleted it from here.
Ahhhh grasshopper, we have endless do loop here. Assuming it is keychain related, so I reset my login keychain. Lather, rinse, repeat just like shampoo instructions same errors over an over again.
Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?
Thanks for any help, ideas or suggestions......

IPhoto Database Update loop

After installing iLife11 my Database is in an update loop.
If I start iPhoto it tells me that I have to update my database in order to work with iPhoto.
It takes serveral minutes to updaten. After the update iPhoto freezes with the Apple loding circle.
If I choose faces or other it shows my the resules.
While importing new pic from my HDD iPhoto freezes.
After restart iPhoto wants to update the database again.
Even if I just work with iPhoto (without import) and do a restart of iPhoto it comes again with the Update of the Database.
Does somebody know how to solve the issue?

Welcome to Apple Discussions. This appears to be a problem for many users and there is a very detailed discussion on this issue here: http://discussions.apple.com/thread.jspa?threadID=2620921&tstart=0
I had the same issue and after several hours of trial and error I found that several "Keepsake" items in my iPhoto library were not supported in iPhoto '11.
If you have any keepsake items in your left pane, I suggest you open the original database in iPhoto '09 (you did do a full backup before you tried to upgrade didn't you?), delete and Keepsake items, and then restart iPhoto '11. The database should convert properly at that point.
Hope this helps.
David

My iCal is stuck "updating". How do I get it to stop?

My iCal is stuck updating. I've been using an iCloud calendar for quite a while. All of a sudden it's stuck "updating". I've quit iCal and restarted it and it's still stuck. Rebooting the iMac doesn't help either. Other than the "updating" at the top all seems to be working.

Fix iPhone Apps Stuck "Waiting" During Installation

Hi am trapped in update loop

Hi I am trapped in an update loop. My iPhone 4.0 is only on v4.2.1 (8C148) and when I put it in iTunes to update it doesn't work. It now says it's "unable to contactr the iPhone software update server because you are not connected to the Internet". This is not the case??? I am connected to the internet. Am not sure what I can do???!
What can I do? And if I manage to get past this can I upgrade straight from v4.2.1 to latest (6?) or must this be done in stages???
I am not sure if the next steps is 'restore to factory defaults?' I am trying to avoid that as I have not backed up my data to iCloud...Incidentally I am also unable to back up my iPhone to iCloud as iCloud not on v4.2.1 so would need to update before being able to use...which of course I can't do!
Thanks for your help!!!

Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

If you toggle Airplane mode On/Off, does it resolve?

Flash Builder 4 endless compile loop?

Sometimes my Flex projects get stuck in an endless compile loop. What I mean is, they start building, go to a certain percentage and then restart at 0%. I have to cancel the build process and do a Project, Clean just to get the project built so I can debug.
Anyone else experiencing this? I'm unsure if this is related to having Aptana Studio 1.5.1 also installed on the same eclipse, but that's the only other major plugin I have installed.
David

Hi David,
yup, I know this error. I reproduced it several times.
If you use the automatic binding, by dragging and dropping an EntityService to a Datagrid, some code is added.
For example a definition for the callresponder, a call for this callresponder, a creationComplete for the DataGrid.
If you do this several times and then start you delete some parts of the generated code for bindinng, the described error happens quit quickly!
Then you do not(!) get a clear compile error, but it compiles for ever .
You can solve this in two ways.
Take this project out of your workspace ( you do not habe to delete it from disk).
Find the still existing code snip, that produces the error and delete it and use clean compile. To find the error is tricky!!! because DataGrid3 belongs to Callresponder 2 and so on and you don not(!) get clear messages from the compiler.
I use the automatic code generation, but do not use the automatic binding. Then this kind of error does not happen any more!
Hope this helps!
Martin Zach
P.S: This has nothing to do with Aptana.

Flash export - endless reload loop in frameset

I'm exporting a SWF from Keynote and it plays nicely in a "regular" HTML page, but when it's placed in a frame I get an endless reload loop and nothing displays.
Someone far more technical than me has analysed the file and says it's been caused by the SWF using a "getURL".
I've worked round it by exporting as FLV, bringing that into Flash CS3 and exporting as SWF from there, but it's not the most elegant solution!
Does anyone know of a way round this?

Do you have the first slide set to play automatically? I am just trying out keynote myself for creating a swf of just a few images fading in and out etc. After I discovered that transitions between slides didn't work I added all the images to one slide and used builds to orchestrate them. I had a problem with the whole thing looping over and over because the first (and only) slide is set to play automatically. I have now added a blank slide to the end with no transition and that seems to stop it.
Hope that helps.

ICal won't update

All of a sudden iCal won't update my previously-published calendars -- which are hosted in my .mac account. I changed nothing; the problem started yesterday, before I had installed the recent updates and patches to QuickTime and the OS. Also, my iDisk is suddenly inaccessible. Is this a server-side problem of some sort?
I have already repaired permissions, restarted, and done all of the usual stuff.

Well, now everything seems to be working, so I suppose it was some kind of server-side issue.

ICal in endless update loop ?!?!

Similar Messages

Maybe you are looking for