Flash export - endless reload loop in frameset

I'm exporting a SWF from Keynote and it plays nicely in a "regular" HTML page, but when it's placed in a frame I get an endless reload loop and nothing displays.
Someone far more technical than me has analysed the file and says it's been caused by the SWF using a "getURL".
I've worked round it by exporting as FLV, bringing that into Flash CS3 and exporting as SWF from there, but it's not the most elegant solution!
Does anyone know of a way round this?

Do you have the first slide set to play automatically? I am just trying out keynote myself for creating a swf of just a few images fading in and out etc. After I discovered that transitions between slides didn't work I added all the images to one slide and used builds to orchestrate them. I had a problem with the whole thing looping over and over because the first (and only) slide is set to play automatically. I have now added a blank slide to the end with no transition and that seems to stop it.
Hope that helps.

Similar Messages

Flash Builder 4 endless compile loop?

Sometimes my Flex projects get stuck in an endless compile loop. What I mean is, they start building, go to a certain percentage and then restart at 0%. I have to cancel the build process and do a Project, Clean just to get the project built so I can debug.
Anyone else experiencing this? I'm unsure if this is related to having Aptana Studio 1.5.1 also installed on the same eclipse, but that's the only other major plugin I have installed.
David

Hi David,
yup, I know this error. I reproduced it several times.
If you use the automatic binding, by dragging and dropping an EntityService to a Datagrid, some code is added.
For example a definition for the callresponder, a call for this callresponder, a creationComplete for the DataGrid.
If you do this several times and then start you delete some parts of the generated code for bindinng, the described error happens quit quickly!
Then you do not(!) get a clear compile error, but it compiles for ever .
You can solve this in two ways.
Take this project out of your workspace ( you do not habe to delete it from disk).
Find the still existing code snip, that produces the error and delete it and use clean compile. To find the error is tricky!!! because DataGrid3 belongs to Callresponder 2 and so on and you don not(!) get clear messages from the compiler.
I use the automatic code generation, but do not use the automatic binding. Then this kind of error does not happen any more!
Hope this helps!
Martin Zach
P.S: This has nothing to do with Aptana.

Endless restarting and flashing on Apple logo loop

My iPhone 4s with iOS 8.1.2 is in a endless rebooting loop. I cannot turn it off. I cannot restore or recovery or anything in recovery mode or DFU. all of my programs are up to date. When I plug it in the wall it start in a endless loop, apple logo appears, after 3 second a white page blinking and then it restart again.
I checked the battery and power cable and sensor, both of them are working well.
please help me, how should I do? what`s the problem?

As I posted to another similar question, I got this problem fixed followingly (is that a word?):
For those like myself who don't backup your device regularly and fear you may lose data, there is hope. My 4S started looping the apple logo at start up and wouldn't go anywhere from there, the screen went black and then the apple logo would appear again over and over... Browsing around I found that recovery mode and resetting the phone was suggested, some suggested downloading software to fix the issue but I found that rather dodgy so I decided to try something else.
Now I must remind you that opening your phone will void your warranty or such if still applicable, my phone's maybe four three years old and I've replaced the screen myself so I figured I'd try something to shock the phone back into life somehow (think the last popup reminder said I hadn't backed up in 29 weeks so meh).
What I did was opened up the back cover and removed the battery, plugged it back into the charger (other end in my mac) but the loop would still occur. I plugged and unplugged a few times, unplugging right after the apple appeared, hoping for this to "confuse" the phone which was so stubbornly stuck in "recovery mode" (from what I've understood through other threads). Notice that the phone did appear to turn on without the battery connected, but plugged into a power source (not sure if that should happen since after dead battery you need to charge a while until the phone wakes up), just something mildly interesting I picked up on.
This did not appear to have any effect tho, but I decided to pop the battery back in its place (I did leave out the little black plate that goes between the battery connector and the motherboard, covering the antenna cables connecting point, not sure if that had any effect or how it would effect fully working phones (I only use this phone as an "ipod" since the sim reader has been dead for some time, but I still use the camera and music)). Pressed the power button and noticed the apple logo stayed for longer than before (became hopeful!) and eventually made way for my home-screen!
That's how I got it working, don't know if you can do a similar thing with other models. And sorry for rambling on like that, that's just how I express myself and I can't afford to hire an editor to work my internet posts. But I can leave a TL;DR version.
TL;DR Iphone 4s stuck on logo loop? disconnect battery and do magic.

Endless resetting loop

Dear Guys: I found out that is impossible to correct an endless resetting loop on a PALM TX device after one gets hit by it. Howerver, I have another dead battery Palm Tx that I could scavence for the specific affected misfiring card. Can any one take me thru steps to open the old TX, scanve the sick card and rep[lace it?! I dont want to send the Palm some where far.I live in Latin AM. Do I need and electronics saavy guy to do that?
I appreciate your suggentions. I do miss the stuff I had in it.
Another question.........how can I thansfer all data (internal memory) of the malfunctioning PALM TX thru the Palm DeskTOP program to a PALM TUNGSTEN that I also have working? Each one is identified bu different names, so the info in one does not appear in the other. Is there a way to blend the info tho the replacing PALM Tungst.?? Hope is not 2 much 2 ask!! Oscaritos
Post relates to: Palm TX

Have you tried a warm or hard reset? The hard reset erases all data on the device so if you have data you want to try and save, don't use the hard reset. Typically a looping reset can be caused by an incompatible app or corruption. Try the system or warm reset first to see if you can break out of the loop.
Click on the following link to the kb.hpwebos.com webpage for the article regarding resets.
http://kb.hpwebos.com/wps/portal/kb2/common/article/887
Search the internet for 3rd party repair services for your TX. Some have take-apart directions. Check out directfix.com.
If the TX will not boot into a mode that allows you to hotsync, the data cannot be recovered.
If you have 2 TX HH and want to use the same username on both, it will sync the same info. to both devices. The issue of incompatibility of different models will not be a factor since they are both the same model. You will need to sync the first TX to Palm Desktop. Once the data is sync'ed from the first TX and in PD, change the condiuits to desktop overwrites handheld and sync the 2nd TX.
Once the data is in Palm desktop, you should export your data for backup purposes and disaster recovery.
The best way to preserve your data is to export the data in each category in Palm Desktop to a separate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://kb.hpwebos.com/wps/portal/kb2/common/article/28734_en.html
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Keynote 08 Flash Export not compatible with Adobe Acrobat Connect Pro

Hello
Our company uses Keynote extensively for presentations. We also give presentations online using Adobe Acrobat Connect Professional (hosted, formerly known as Macromedia Breeze - <http://www.adobe.com/products/acrobatconnectpro/>). Where as it's a great environment for online seminars (best I've seen), it fails dramatically when you upload a looping Flash file created in Keynote. I first tried this in Keynote '06 and now in '08.
When I tried in Keynote 06, the animation was three slides looping, synced to an audio track. When I tried in '08, it was one slide with (the new) animations looping over 20 seconds (or so) without a soundtrack.
I have some contact with Adobe, and this issue has been sent to their engineering department, but they seem to think there's something funky about the format of the file that Keynote exports. I'm trying to gather more data for them to investigate with.
Does anyone know what version of Flash Apple's export is most like? Do we have any specs on the file export format?
Has anyone tried using Flash exports in other Flash-using online environments?
Thanks!
~brian

I believe I figured it was somewhere between Flash 5 and Flash 6. I say this because while the resulting presentations could be opened in QuickTime (which only uses Flash 5) a better result would be achieved by viewing in the browser. Either that, or QuickTime's Flash 5 support isn't complete.

Flash Export of Slideshow hoses users using IE for Windows

I have exported a slideshow from Keynote as Flash and it works great in Safari and other Mac browsers. When I run the show on Windows XP in IE 6 each frame in the presentation modifies the URL of the page with an anchor. eg. test.html#SlideFrame_1 rapidly becomes test.html#SlideFrame_2 and so on.
This is a fairly fast slideshow and so the user can never use his location bar as the URL is so frequently changing. Makes Flash export from Keynote useless to me. Any ideas?
G5 Dual 2.0 Mac OS X (10.4.4)

Looks like everything's working to me. I was having this same problem, but never got around to uploading the flash to the site because it keeps looping for me, too. But your's seems to be fine--did you do anything to correct this, or did it seem to fix itself?!
Bryan

P6N SLI Platinum – endless reboot loop. Need help!

P6N SLI Platinum – endless reboot loop. Need help!
Configuration;
Windows XP Pro, SP-2
On old hard drive (Maxtor) I installed in the new case
OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply
MSI P6N SLI Platinum
EVGA 256-P2-N550-T2 7600GT
INTEL Dual Core E4400
MEMORY tried two different ones;
GeIL Esoteria 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
Kingston Value Ram 1GB 667MH (of course tried in different slots, stick @ time)
NEC DVD player/burner
Old Maxtor IDE drive W/OS (I have new Seagate serial but won’t install it until I get everything else running.
Computer goes in an endless reboot cycle. First, showing a black screen with small parallel white hash marks. Can pull up Bios but that’s as far as I can go. At first, I thought the high end Geil memory might be at fault. But after installing the more generic Kingston I get the same looping.
In Bios, it is reading all my hardware; CPU, memory, hard drives, temperatures, voltages, etc. the only thing it doesn’t specifically show is the Evga video card. I don’t know if there is really any place it would show except in Hardware Profile.
One other thing, Bios is showing the NEC as the Primary IDE Master and the Maxtor as the Secondary IDE master (although I have tried it both ways). I generally like to boot first from my DVD then go to hard drive.
I don’t know where to go from here. Can anyone give me some suggestions?
Thanks,
Clickman

two replies;
To Vernonion
With JUST new Sata drive & DVD I get message "Reboot & select proper boot device or insert boot media in selected boot device & press a key" in other words, install windows. No flashing anything.
To Maesus
Yes, have tried boot sequence every which way . DVD functions as I ran Memtest for 4 hours last night.
I think I will use the information mentioned in the 3 links V gave me earlier to "repair" the OS on my old Maxtor drive. It is partitioned with OS in one area by itself, docs in another partition, programs another, etc. so I wouldn't lose any work. At worst, I might have to reinstall some programs. At best, I accomplish what I set out to do.
Many thanks,
Clickman

Looking for a sample of the Flash Export from Encore CS3

I am close to upgrading to the CS3 Production Premium and one of the features that intrigues me is the Flash export from Encore CS3. I have searched the Adobe site without success for a sample of what an exported project looks like and functions on the web. Can anyone point me to a on-line sample of an exported project? Thanks in advance :)

'Black Gaps' in Flash usually come from the Flash trying to locate & load the next Flash file. Without a Pre-Loader, you will probably always have this... especially if your quality is set too high. This equates to longer load/buffer times which means there is nothing to display until there is enough video loaded in the buffer to play.
If your ultimate goal is to create Video for the Web... you'll need to learn proper techniques for producing video for the web. It is much different than producing video for TV or DVD. On the web you have to compress your video a lot more therefore you should not use a lot of Motion/Movement in your Characters, Camera, Media, Motion Backgrounds, etc. The less Motion/Movement you have means you can lower your quality settings but still get awesome looking video & good load times eliminating the Black Gaps and making an all around smoother internet presentation/experience.

IPAD 2 is wiped and in endless restore loop with 5.1

I downloaded and installed iOS5.1 about 7 hours ago after being prompted on both my iPad2 and iPhone4S via WIFI. No problem with the iPhone,works great. However, when the iPad rebooted it told me I needed to restore the device, which I attempted to do so over a dozen times on two differnet PC's (office and home) and each time I get an error "The iPad "iPad" could not be restored. An unknown error occurred (1)." I have checked many forunm and sites for help. I tried everything that Apple and other posts suggested but no luck at all in the endless restore loop.
I am really shocked that Apple would release this IOS 5.1 disaster out with any real help or guidance. The worse part is the erasure of all data on the device, including the device name. The ITunes window can't even identify the capacity or serial number. What a cluster.

In case anyone was wondering how this was resolved, I had to ring Apple Support. Secondly, this problem was compounded by the fact that I only backed up to the Cloud, not my PC. Stupidly, on my iPad after it lost all it's data, I clicked on 'sync to the Cloud', which overwrote my good backup.
I had to set my iPad in iTunes up as a new iPad, and move everything back over. From now on I am only going to sync to the PC.

ICloud Setup on Mac post Mavericks upgrade results in endless do loop

iCloud Problems
So you open Internet Accounts - and delete from internet accounts [email protected] (can’t logout)
The dreaded account is gone……..
So now back to System preferences and into the iCloud icon to set User [kaiserja] as default iCloud account and cure the ills of the world.
You go back to internet accounts and get —
Ahhhh grasshopper, we have endless do loop here. Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?

Rebuilding in this system, so when trying to sign in to iCloud to set up
Proper data entered and the window goes away but nothing happens
Conclude issue is with iCloud setup, so to system preferences and iCloud we go
From there we get sent to internet accounts, after clicking internet accounts, we see the screen below and delete the inactive [email protected]
(BTW have no idea what inactive means. account functions on iPhone, iPad and iCloud over safari)
After deleting the offending user account, we see
All gone so all should be golden, no? So returning to iCloud set up, we get
and opening Internet accounts and entering our apple id leads us back to here....
an obvious and not very helpful statement as I use this account on multiple devices, but just deleted it from here.
Ahhhh grasshopper, we have endless do loop here. Assuming it is keychain related, so I reset my login keychain. Lather, rinse, repeat just like shampoo instructions same errors over an over again.
Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?
Thanks for any help, ideas or suggestions......

Java + Safari causes page to 'flash' (i.e. reload even cached images)

Does anyone know if this is able to be corrected or at least why this occurs?
For Safari 4 beta when Java is active my site http://www.theimagecache.com 'flashes' a lot (i.e.reloads even cached images). Whereas with Java disabled this does not happen and the pages load considerably more quickly.
I hadn't noticed this before in Safari 3+... but then again... I usually had Java turned off for security reasons so it may have existed then as well.
But in Firefox 3.1b3, even with Java turned on the pages load very slightly more slowly (i.e. literally only about a fraction of a second more slowly... which is understandable) but they do not 'flash' (i.e. reload cached images).
Any ideas as to if this can be corrected so viewers that have Java on by default and are using Safari do not see all of this flashing and slower loading?
Thanks for any input.
Ron

Thanks Michael for posting.
Yes... this Safari beta may be the problem, because even after the images have been cached often many of the images on a new page (that have already been cached) reload.
Whereas in Firefox 3.1b3 (beta) this does not happen.
Hopefully they'll get this fixed.
Thanks again.
Hope things are going well for you there in Sweden, considering all of the world economic problems.

How do i include transitions in Flash export?

when I export my Keynote presentation to Flash, the transitions I selected disappear leaving way to a simple change of screen. I was wondering if there was a way to preserve all transitions and effects in the Flash export.
Thank you for your help!

I am pretty sure its not possible at this stage.
As most ads like Mochi etc are in fact .swf files loaded in from the web, which is not supported on the Iphone. ( as those would be actual 'Flash' files where as the app you are running is compiled to Xcode )
PS: hmm i just realised you were referring to the native Iphone Ads... well I dont know then! but is a really really interesting question! I suppose when Adobe releases a 'non-preview' version of the Packager they might open up some API to it.

Endless Installation Loop...

Hey,
So, I went and started up boot camp and installed Windows XP Pro (SP2), it said the installation was a success. However, when I restart my computer (without holding option), the screen goes black and boots into windows. Windows then says "PLEASE INSERT SYSTEM DISK AND PRESS ANY KEY TO CONTINUE". When I do, it starts up the install prompt and does the whole thing over again. I have tried numerous partition types (NTFS, FAT32, Leaving it intact, etc.) with no success. Also, when I try holding option, the system ignores me and does its endless installation loop again. I have to hold 3 keys (I forgot what they are, but that's not important) just to get it to boot back into OS X.
So, what do I have to do in order to run Windows Successfully? I have also tried many different install disks, still with no success.
Do you think upgrading my Boot Camp Assistant will help?

The only boot camp assistant version is 2.0 for mac. Boot camp only updates to 2.1 on the windows side. You can try redownloading bootcamp assitant for mac or reinstall mac os again maybe something is wrong?

Flash Export and Image Quality

When I place Illustrator CSx eps files in my keynote presentations and then export to flash it really chews up the images. You would think vector images would fair the best but the lines are very jagged making the presentation look very ugly.
Does anyone have any tips on improving this? I've tried PNG,jpg, etc.. the images I'm using are line art (e.g. diagrams) but it doesn't seem to help using other file formats.
I don't understand why there is no compression control available for flash export....
Mark

edit your image in photoshop and experiment with various settings/size. there's no magic high quality small file size setting.
it's a trade-off. the higher the quality and the greater the image dimensions, the greater the file size. you have to decide where those are acceptable.

CS6 flash exports use 1 motion transition for all instances?

I'm using Encore CS6 OSX10.8.4. I have 1 main menu, 1 sub menu, 2 simple motion transitions. One to the sub menu and one back to main. Both only 1 second long created in AE 5.5 rendered as .mov files.
Everything looks good in the preview option. Exported to DVD and everything works fine. Export to flash and it plays only one motion transition in both cases.
I tried replacing the referenced motion video that was not recognized another and the same results. Happens in both FLV and F4V exports.
Any ideas on how to correct this? There are no special characters in my project file asset names. Tried it in chrome and firefox. Redid a new Encore file and same outcome.
I wan to use flash export to keep higher resolution than SD so I can take a screen video of navigating through the menus and use that high res video as part of a portfolio for a potentical job.
Any Help is much appreciated

There are some limitations to flash export, but I don't recall this coming up. No time to test at the moment.

Flash export - endless reload loop in frameset

Similar Messages

Maybe you are looking for