IChart Pie Chart doesn't response to SelectionEvent

Hi,
I have a pie chart. I would like to have the slices in the pie chart clickable. When one slice is selected, I would like to display the detail information in another iGrid table. I have done it with iChart Bar with no problem. However, it seems like the pie chart doesn't response to any selection on the slices, except the legend tags for the whole chart.
Did I miss some configuration?
Thank you for your advice!

Hi Yue,
Instead of trying to click on the Chart, try clicking on the legend. It will work. It is working for me here.
Use the same Selection Event and same Javascript. And click on the <b>Legend</b>. It will display the desired Value.
For Example, i have used the below code for my SelectionEvent.
<b>document.ChartName.getChartObject().getSelectedPen();</b>
Hope this will help u.
Regards
Muzammil

Similar Messages

Histogram works, Pie Chart doesn't :(

I have a simple form, which has 1 block, a block level "when-new-block-instance" trigger and 2 bean_area under the block (beans don't have any trigger code). This simple form is called from within another form when a button is pressed. The histogram (bar chart) works, but the simple pie chart doesn't work (only displays a single circle - not the slices on the pie). The related trigger code is below. Can anybody see what is wrong with the pie chart code ?
Appreciated.
=====================================================================
-- Set the bean area properties
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'CLEAR_BLOCK','');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'GRAPHTYPE','VERTICAL_BAR');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ENABLE_TOOLTIPS','VALUES');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DELIMITER','#');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_TITLE','Order Count By WHIP#red#b#14');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_FOOTER','WHIP Name#blue#12');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DELIMITER',',');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_Y_LABEL','Move Your Mouse To View The Value For Each Bar');
-- Use the following for a nice 3D look (if users want)
-- SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DEPTH','20,45');
-- This should populate and display the data on the graph by using the related PJC
DECLARE
ordercount NUMBER(10);
whipname VARCHAR2(25);
vData VARCHAR2(200);
vDelimiter VARCHAR2(1);
cursor c1 is select distinct interface_name from pps_order order by interface_name;
BEGIN
vDelimiter := ',';
open c1;
fetch c1 into whipname;
while (c1%found) loop
select count(*) into ordercount from pps_order where interface_name=whipname;
vData := 'Total Order Count Per WHIP'||vDelimiter||whipname||vDelimiter||ordercount;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ADD_ROWDATA',vData);
fetch c1 into whipname;
end loop;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ADD_DATA_TO_GRAPH','');
close c1;
END;
-- THIS SECTION IS FOR THE PIE CHART
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'CLEAR_BLOCK','');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'GRAPHTYPE','PIE_GRAPH');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SHOW_PIE_LABELS','VALUE');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_DELIMITER','#');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_TITLE','Order Count By WHIP#red#b#14');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_FOOTER','WHIP Name#blue#12');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_DELIMITER',',');
-- This should populate and display the data on the graph by using the related PJC
DECLARE
ordercount NUMBER(10);
whipname VARCHAR2(25);
vData VARCHAR2(200);
vDelimiter VARCHAR2(1);
cursor c2 is select distinct interface_name from pps_order order by interface_name;
BEGIN
vDelimiter := ',';
open c2;
fetch c2 into whipname;
while (c2%found) loop
select count(*) into ordercount from pps_order where interface_name=whipname;
vData := 'Total Order Count Per WHIP'||vDelimiter||whipname||vDelimiter||ordercount;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'ADD_ROWDATA',vData);
fetch c2 into whipname;
end loop;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'ADD_DATA_TO_GRAPH','');
close c2;
END;
GO_ITEM('BLOCK1.CLOSE');
This uses the FormsGraph.jar file implementation as you can see. I know Frank Nimphius is the only expert when it comes to FormsGraph.jar at Oracle, but currently he is on vacation - so no official support to an unofficial (unsupported) charting implementation - but I thought there might be others who have done this before.
Can someone who implemented a pie chart share his/her code here - a simple pie chart, nothing fancy (like the one that comes with the graph90.fmb file, which I followed but did not figure out why my implementation is not working). Something with the vData string or number of vData strings requirement? no explanation in the FormsGraph.jar doc and I am not a java programmer to figure it out from the java source code. I am looking for a simple trigger code for the pie chart - not like "look at the forms90.fmb that comes with the demo package" kinda answer.
Thanx
Message was edited by:
zaferaktan
Message was edited by:
zaferaktan

Any idea ?

Pie chart doesn't show the label of the last slice

Post Author: saschaherrle
CA Forum: Charts and Graphs
Hi there...
I have this problem with displaying the label of the last pie slice of my report. It is working perfectly fine in my testing environment, but it just doesn't want to show in the client environmet... I don't know what to try anymore. I've tried all the other label location options, but they also dont help. There are five slices on the pie chart with the following values:
1.9%
43.6%
51.1%
2.3%
1.1%
All the labels and feeler lines are showing except for value number 5.
Any help or advice would be greatly appreciated. Thanks
P.S. I'm using Crystal Reports XI Version 11.0.0.1994 and the client is just running the Crystal Runtime (Maybe this helps... I hope)

ewilly wrote:Sorry to say that but i'm not unhappy to see i'm not alone to encounter this issue
I aggree with you : it's only a partial issue as those partitions are mounted under /media with their label name.
As krusader is able to retrieve the label name i don't think it's an udisks issue so it's more related to a kde functionnality. I looked for missing (optionnal or not) dependencies but without success.
Any idea is welcome... perhaps opening a bug could help ??
I have run out of ideas.
If you tried krusader, yes, it is quite safe to assume it is not a udisks problem, since I tried nautilus which uses udisks2. I also would rule out udev/systemd. Leaves solid, kdelibs, and the kdebase sources.
As said, on gentoo, kdelibs are compiled with udev dependency which I have not seen in the pkgbuild for kdelibs.
I think a bug report is a good idea.
Last edited by artoo (2012-09-06 18:01:49)

Pie Chart doesn't display all columns

I set up a simply table and made a bar chart = everything worked out well.
I selected my table again and clicked on 'make pie chart' but this time it doesn't display all the colums. I really don't know what went wrong here.
I'd appreciate it very much if some could help me out here.
Preview Picture: http://cl.ly/1SKg
Numbers File: http://cl.ly/1SAh

patte,
Even though you have selected the entire table to be charted as a Pie Chart, and the table includes three data series, a Pie Chart can only display one series at a time, so it displays the first one; "3. Klasse"
In "3. Klasse", the values of Schaukel and Drehscheibe are zero, so there is no pie to display.
Hope this explains the situation for you. To make Pie Charts for the other two series, you would again select the header cells, then hold down the Command key while selecting the other series. Then add another chart. Do this for each series you wish to chart.
Regards,
Jerry

Keep pie chart from shrinking due to long labels outside of chart

I was wondering is there a way to keep my pie chart from shrinking when I have labels outside of the chart that are long? Is there an option to wrap the labels, or dynamically shrink the font size of the labels, or both, so that my pie chart doesn't
have to be shrunk?
Please provide details on how this is done if you know how. Thanks.

Hi jiwalkersm,
According to your description, you want to avoid your pie chart shrinking when the label outside is too long. Right?
In Reporting Service, if we want to always keep the pie chart size, we can set Docks into Default in Legend Properties, and let the legend not to show outside of chart. This will keep the position and size of the chart, but the legend will stay above the
chart which is not good for view. So we try to use expression to set font size in Legend Properties. However, we don’t have any function which can make the label wrapped. So we can only set font size based on the length of the label (For example: =IIF(Len(Field!Name.Value)>10,”5pt”,”8pt”)).
If this workaround still can’t be effective, we suggest you delete the legend, and create a tablix next to the chart, put the data into it.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

CR 8.0 pie chart/graph doesn't appear in web browser

Post Author: kevind
CA Forum: Charts and Graphs
Hi,
I am using a CR 8.0 report (containing data in tabular format and Pie/Bar graph) with Web component Server.
In design mode (by entering the parameters) when i view my report through the CR IDE then i can view my report perfectly with the pie and bar graphs.
However,once i call the same report through the web component server, by my JSP page, the report appears with the data but the page containing the piechart/Bar graph doesn't appear. (i am using the ActiveXViewer)
When i remove the chart/graph, then all the pages are displayed in my browser (IE) properly, but if i add back the pie chart then the page on which this should appear - doesnt display.
Has anyone faced a similar issue? In design it displays with data but once called through webcomponent server it fails?
Thanks,
Kevin D

Hello Subramaya,
currently I am working on a small article in the Wiki area of the ITS (Wiki, ITS HowTos): <a href="https://wiki.sdn.sap.com/wiki/display/HOME/UsingSAPGUIforHTMLinsteadofanIAC">Using SAP GUI for HTML instead of an IAC or EWT service</a>.
Also see notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417, "Integrated ITS, Closing Session When Transaction Ends". I am pretty sure that this is exactly what you are looking for.
With best regards,
TJ

Error while creating a Pie Chart

Hi Experts,
I have prepared a spreadsheet in Web Analysis in which two dimensions are appearing in Rows, one dimension in Columns and one dimension in Page View.
When I convert this spreadsheet into a Pie Chart, or any other chart for that matter, no data is displayed. If I remove one dimension from Rows to POV, data starts appearing in the chart. But it is not a relevant chart as the data shown in it is not in the format in which it is required.
Kindly help in resolving this issue.
Regards,
SYR

Hi Sa'ad
Its been a little while since I used Web Analysis but I remember that there are issues if you have more than 1 dimension in rows or columns. What I cannot remember is whether it automatically shifts a dimension to the page or whether as you suggest it just doesn't display.
Pie charts can only display data from two dimensions (1 rows, 1 columns), you can filter using dimensions on pages. If that doesn't give you what you need then I'm afraid you need to stick to a different chart type.
Hope this helps
Stuart

How to show negative value in Pie Chart from Webi?

I have below example data, I want to convert this to a pie chart in Web Intelligence, my problem is after I convert it to a pie chart, the revenue '-30' is shown as '30', looks like the pie chart is not suppor the negative value to show, I want to know if there is any workaround or solution to make the pie chart to show the negative value? Is this behavior is by design? do we have any official document to explain this?
The product I used is BOE XI 3.1 SP3.
Department    Revenue
A                      100
B                       -30
C                        80
Edited by: Alex Wang on Jul 13, 2010 5:51 PM

Why are you showing this information as a pie chart? It doesn't make sense to try and display a negative slice in a pie chart. I can't really think of a logical way to try and draw a negative slice in a pie chart. With a pie chart you will need all your information to either all be positive or all negative, otherwise it doesn't work.
What you need is to have a bar chart, with positive and negative values on the y axis.

Pie chart legend summary bug, weird text being printed

Hi guys, I created a simple report with a Pie Chart on VS2008 and on my computer the chart legend displays all items perfectly but when I deploy it on our web server the legend summary, which is always 100% doesn't say "Total" anymore but a weird text, have you seen this before? Here's a sample.
On my machine the chart legend is the following:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
Total                                  100.0% 180
On the server:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
eTotal:1_n_pseudoloc_   100.0% 180

Have not seen this before, but do apply SP1 on your dev computer:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Recompile.
And use SP1 runtime:
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
See if that helps.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

PIE Chart image si not displaying

i develop a pie chart using .net 1.1, crystal report.
when i run my application in my local meachine, the data is coming
but chart is not dispalying.
i am getting cross red mark in place chart and crystal report navigation button images are also not dispalying.
Thanks in advance.

Hi
Thanks for y'r response.
Data is correct, i am taking name as on change field value, and salary on show value.
i am not getting images of navigation buttons also.
i am doing my first application in piechart.
so i don't know how to check sort options?

Pie Chart select event fires all items instead of selected

Hi,
I would like to fire an event from the select on a particular element in a pie chart.
The Flash Debugger shows that the select is sending all items to the data service. I only want to send the selected item to the data service
I am using SP8.
Any suggestions.
Thanks.
Dick
--- Debug Logger ---
21: [AAD4] schedulePlan(SELECT)
20: [AAD4] schedulePlan(FORM5_SELECT)
19: [AAD4] raiseEvent(FORM5, SELECT)
18: [AAD4] Number of rows in Response is: undefined
17: [AAD4] Threshold number of rows is:
16: [AAD4] receiveADC4()
15: [AAD4] schedulePlan(SELECT)
14: [AAD4] executeNext(shift plansQueue - length:0)
13: [AAD4] executeNext([STEP10])
12: [AAD4] Sent request: <Request type="executeFunction" function="getBorrowerByName_R" system="BorrowerFinal2" systemType="WebServicesFactory" manageConnection="N" encode="Y" commit="N" convert="N" dsmid="Administrator:com.myComp.myProduct.4.Digital_dashboard.par:1166609751870"><Input name="INPUT" shape="OBJ" appName="INPUT" ><Meta><field name="arg0" appName="arg0" type="string"/></Meta><Row arg0="Hirsch"/><Row arg0="Boston"/><Row arg0="New York"/><Row arg0="Macy's"/><Row arg0="Sears"/><Row arg0="Hedges"/></Input><Output name="Response" appName="OUTPUT___sp___Response" shape="OBJ" capacity="0"></Output><Output name="RETURN" shape="ROW" capacity="1"/></Request>
11: [AAD4] checkStep([STEP10])
10: [AAD4] [PLAN17] Invoke ADC4
9: [AAD4] executeNext([STEP3])
8: [AAD4] checkStep([STEP3])
7: [AAD4] [PLAN17] Map CHART2 -> ADC4.INPUT
6: [AAD4] executeNext([STEP11])
5: [AAD4] [PLAN17] Reset ADC4
4: [AAD4] executeNext([STEPundefined])
3: [AAD4] schedulePlan(CHART2_SELECT)
2: [AAD4] Engine fire infoset change event, notify to: GRID6
1: [AAD4] raiseEvent(CHART2, SELECT)

Hi Marcel,
I am surprised that you got this to work. How did you configure your pie chart?
>You have to assign an event to the data mapping between the chart and the data provider (write select for the event name).
I did this (look at the Flash debuggerinfo in the initial post) but this didn't help. Can you post the Flash debugger info from your pie chart?
Thanks.
Dick

Pie Chart / Query : Top 3 and Remainder

Hi
I am trying to develop a template, which shows various exception information to the end user. There are approximately 20 exception scenarios which are analysed each night and data stored in the cube. This information is then related back to the end user via a simple web template.
I can show that data in a table nicely.
I have created an additional query with a "Top 3" condition applied, which results in the 3 exceptions that contribute the mos to the total being displayed. This query can then be used as the source for a pie chart, so the user can see graphically which are the most important exceptions to address.
I have now been asked to include a "remainder" item in that pie chart, or not have the pie chart add up to 100%. What the user wants to see, is what the top 3 exceptions were, and what all the other exceptions added up to, essentially the difference between 100% and the sum of the contribution (%) of the top 3.
I can write a query which displays the top 3, and include in that a result row which shows the sum of the percentages. So, for example, it will display the 3 and the total will be 87%, meaning the remaining errors contributed 13%, but how would I get this as an additional row in the query?
Alternately, is it possible to have a pie chart that doesn't add up to 100%. A pie chart that is incomplete in essence?
Any advice would be appreciated.
Cheers,
Andrew

Hi Andrew,
To show the value as a percentage and not have the total be 100%, you need to calculate the value in the query. Create a key figure to calculate the percentage and use a condition to only show the top 3. Conditions wont effect the totals or percentages so the total percentage won't add up to 100.
I don't think it's possible to show a 'other' value with the remainder.
Kind regards,
Alex

Problem with wedge in Pie chart

Hi all,
i'm having a Pie chart which has some four or five sections. By using wedge option i'm able to cut out a single piece from the whole chart. But my requirement is i need to show all pieces individually. Is it possible? Please help me in this.
Kind regards,
karthick

Hi Karthick,
it is not impossible, but it is not very easy to accomplish this. First of all, the chart engine (Corda PopChart) is bounded by OBIEE. What I mean is that OBIEE doesn't use the full functionality of the chart engine, so when you want to customize the chart, beyond the functionality OBIEE uses, then there is no other option then to edit the PopChart XML files (.pcxml). In ..\OracleBI\web\app\res\s_oracle10\popbin\ and ..\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\popbin you can find pie.pcxml which defines the pie chart.
About your problem: you want to explode all wedges in your pie chart. According to the Corda documentation you can only explode one wedge, but it is possible to create a pie chart with gaps between all wedges and you can also set the size of the gap. So by setting these parameters I guess you can get what you want.
Example: You need to add ShowPieGap='True' to this line in the .pcxml.
<Properties Effect='2D' EffectPercentX='10' EffectPercentY='60' OutlineType='Darker' ShowPieGap='True'/>I also recommend you to read John's experiences with editing PCXML of Corda:
http://obiee101.blogspot.com/search/label/CORDA
http://obiee101.blogspot.com/search/label/PCXML
Regards,
Stijn

Copy pie chart to Indesign

I need to copy pie charts created in Illustrator into an indesign doc. I've done it before. But now, coopy/paste to Indesign doesn't work. What am I missing.

"Paste" just doesn't seem to have anything to paste.
I have a pie chart in Illustrator, can click on it and see individually-selectable slices as I need. But if I click on copy and try to past in the Indesign document, I have nothing. Am I somehow not selecting the chart correctly?
No, I dn't get any message.

Pie Chart Colors

So I have created a pie chart using the Pie Graph Tool in AI, the data is accurate once it is made, but I cannot change the colors. After entering in the numbers into the cell I select the check mark. It makes the pie graph. Doesn't let me select the separate slices alone so I expanded the entire graph, then direct select to change colors. It lets me select the separate slice, but when I go to change the color it either doesn't work it changes from one shade of grey to another. I need actual color.
Any suggestions? Have tried making several different graphs but still the same issue. Using Creative Cloud

You should be able to direct select single parts of a "live" graph.
This has lead to corrupt files in some cases though. So you might want to test this thoroughly.
If the color panel doesn't show color sliders, try and select CMYK from the panel menu. If that doesn't show, apply a color swatch first and then change its values.

IChart Pie Chart doesn't response to SelectionEvent

Similar Messages

Maybe you are looking for