Ichat AV 3.1 and OS X 10.4.3 and lower
After reading quite a lot of the posts here. There seems to be a good number of people who exprerienced problems with ichat 3.1 under OS X 10.4.3. In general, I have seen "username not responding" issue and "insufficient bandwidth" issue all over the forums. So, I would like to hear who is still strugling and who is successful in resolving this problem.
If you'd like to participate in this discussion, please tell us your story and also indicate your network setting (eg. modem, router, ISP) and how you set things up to work with ichat (Firewall, port forwarding, UPnP). There is no need to be too much in details. Note that this thread isn't particularly for individual troubleshooting purpose.
It would be helpful for all of us to see both successful and unsuccessful examples. The ultimate goal would be to find out a unified solution to the recent ichat problem, if there is any.
Thanks,
Navin
Hi Ralph,
I've tried to change settings back and forth and lost track on what have actually cause the problem. Now I arrived at the setting with working ichat (verifying with appleu3test01-03).
Is this setting reasonable to you?
speedstream modem
modem takes care of PPPoE log in.
Modem IP address: 192.168.0.1
IP address: 71.143.20.237
IP Gateway: 71.143.31.254
DNS server: 206.13.31.12
206.13.28.12
Mode PPPoE on the modem with Private IP for LAN device
Linksys Router:
assigns static IP to the modem.
Internet IP address: 192.168.1.64 (the router assigns to itself in relation with the modem)
Subnet Mask: 255.255.0.0 (Mask corresponding to the router IP)
Gateway: 192.168.0.1(IP of the modem) The IP of the router and the modem are on the same Subnet Mask.
Static DNS1: 151.164.1.8
Static DNS2: 206.13.28.12
Router Local IP address: 192.168.1.1 (router IP in relation with the computers within the LAN)
Subnet Mask: 255.255.255.0 (subnet mask corresponding to the router local IP)
DHCP option: disable
Port Forwarding:
ichat1, 5060, protocol TCP and UDP, to IP 192.168.1.101
ichat1, 5190, protocol TCP and UDP, to IP 192.168.1.101
ichat1, 5220, protocol TCP and UDP, to IP 192.168.1.101
ichat1, 5222, protocol TCP and UDP, to IP 192.168.1.101
ichat1, 5678, protocol TCP and UDP, to IP 192.168.1.101
ichat1, 16384-16403, protocol TCP and UDP, to IP 192.168.1.101
UPnP is on. (there is no need for this to be on?)
Both wired QoS and wireless QoS are disable.
On the imac:
Manual IPv4
IP address: 192.168.1.101 (wired connection) 192.168.1.100 (wireless connection)
Subnet Mask: 255.255.255.0
Router (Gateway) IP: 192.168.1.1
DNS server: 151.164.1.8
206.13.28.12
imac G5 2.1Ghz Mac OS X (10.4.3)
Similar Messages
-
Trouble video chatting between Mac Mini and PC. Prob. with Skype and IChat
Hello,
I hope someone can help my dad and I because we have been trying to solve this problem since Xmas. I will try to give you as much information on this as I can so that someone can hopefully help us.
He has a Mac Mini (OS 10.3.9) and a Logitech Quickcam 9.5 and I have a PC. We have tried IChat 2.1 to AIM 5.9 and initially he could see me and hear me and I could see him but couldn't hear him. Now when we try to connect. I can see myself but can't hear or see him. We have looked through a lot of the recent forums and have tried what was suggested with no luck.
We have also tried Mac Skype 2.0.06 to PC Skype 2.5.0.151 but with Skype he can see and hear me but I can either only hear him (when he has not started the video) or only see him when he has started the video. We cannot seem to get both going at the same time. He has made sure that "enable skype video" is ticked in the skype preferences and we have tried ticking "start my video automatically" but it still doesn't seem to work. I would prefer to use Skype if possible because the video is larger and I am more familiar with it.
If someone can help us with this, I would be so happy!
Thanks in advance!
Mac Mini Mac OS X (10.3.9)Hi fantabuloussara,
Welcome to the Apple Discussions
Ok If this was a new computer and iChat was started when the computer was the first time then some settings will not have taken effect.
Go to System Preferences > Quicktime > Streaming or Connection Speed tab (depending if Quicktime 6 or 7).
Set the drop down to 1.5Mbps/T1/LAN and restart iChat.
IS the Mac Firewall ON ?
In that case you will need this at the second pic.
10:02 PM Friday; January 19, 2007 -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I tried uninstalling 7.0.1 and reinstalling it and still it would not update and problems such as losing my bookmarks, and it having different tool bars and add ons each time I opened it. I lost so many bookmarks and it became so frustrating that I decided to try and upgrade to see if that would overcome the problems. And now I have this problem. When I did a search on my hard drive to see how many firefox components there were I found firefox related files and documents all over the place and wondered if I should just delete anything related to firefox to clean any residual files that might be causing problems and then start a clean download, but I didn't want to delete files in windows and wasn't sure what I should delete and what I should leave. Can anyone help?? I miss my firefox and wish that I had never upgraded to 7.0.1 .
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
My wife and I each have an Ipad and use only one mail account. Both Ipads therefore get the same mail and when either one of us deleates an email it also deleates on the other Ipad and this can be a problem if one of us doesn't want that e-mail deleted. Obviously our Ipads are synced and I don't know how to correct this. Any advice ?
If you both have the same email account, there's no setting on iPad you can use. When a message is deleted, it's deleted from the mail account server, which will happen on both devices.
-
Between my husband and I we have 6 devices and we are only allowed to share our Apple ID across 5. Some of the devices are for music and outlook and some are just for music - can I have a separate Apple ID for my mail and contacts. ie. Can you use two different Apple ID's on the same device?
Oh maybe ipads and iphones aren't counted in the five
-
We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
Can this be fixed??Did you change the email address or create a new Apple ID?
If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials. -
I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function
Try CardMunch it works well for me
-
I am trying to transfer files between my ipad 3 and my macbook pro mid-2012 and they will just not connect. I connected them yesterday and it worked fine. And i can not air drop these files into my ipad it has to be done through itunes. And i can not afford to buy a new computer. How do i get these two to connect without having to buy a completely new computer?
Computer USB ports, regardless of the computer maker, have a relatively low power output and thus are not good chargers. They will charge but it takes a long time. You should be charging your iPad from wall power, or a more powerful source like an in-car charger.
Buying another computer will not change that. -
Diff: Linkage of Credit memo and Dispute Case in EHP 4 and EHP5
Hi Experts
I am bit confused ...on the Linkage of Credit memo and Dispute Case in EHP 4 and EHP5.
Does the following statement is valid in EHP4 or EHP5.
"You can add a credit to a dispute to close it or reduce the amount disputed."
If it is possible in EHP 5 or EHP 4, please let me know what is the procedure to follow?
If i need to activate anything in SFW5, please provide what is the Business function i need to activate.
Thanks in Advance.
Regards,
Meenkashi.NLinking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard -
I was syncing my phone to itunes and then my phone automatically locked and now it won't turn back on but when i plug it into a charger it makes the charging sound.
Hi lemmag17,
If your iPhone doesn't appear to be responding or turning on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie
The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade. -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.
Maybe you are looking for
-
Another message mapping complex issue part 2
Hi All. In addtion to my previous question , thers has been another requirement. I have to map one field on the condition of another field the new source can be like this <Header> <seg24> <matpos>10</matpos> <seg12> <matdesc>red</matdesc> <length>100
-
I am quite confused by this - I have a MacBook that refuses to allow users to Login. It boots to the User Name screen, then I select any user and key in the password, the screen goes white for a second then bounces back to the User Name screen again.
-
Is Developer 2000 release 2.1 works under Oracle 9.2.05.
Is Developer 2000 release 2.1 works under Oracle 9.2.0.5. If anyone can answer this will be real help. Thanks in advance.
-
Brother dcp115c printer prints at a very slow speed
after the installation of snow leopard, my printer prints at a very slow speed. anyone got suggestions on how to improve? thanks alot the driver version is correct.
-
Aperture 3 serial number won't work
I just moved to a new Mac Air and wen't to open Aperture and it asked for my serial number which I entered per the email order confirmation I recieved from Apple and now it says it is not valid. Any help would be great.