Icon change for all

Hi
I changed the pdf icon for one file but there
are many. How do I change all files at once?
thanks in advance

Do you want to change the icon or rather, the program that is used to open the file (using Acrobat instead of Preview for example)?
If this is the case, select a PDF file and chose Get Info from the File menu (Command-i works too). in the Get Info window, under "Open with:", use the pull-down menu to select the program you want to use to open the file. Then click the button underneath labeled "Change all..." and click OK.
All files of that type will now be set to the program you designated.

Similar Messages

  • I have iphone 4 . I don't know how that happened that  the normal color  on all icons changed ( for example, normally green color phone icon is now purple color ) and photo pictures turned negative ( ghost-like ). Your help will be appreciated .

    I have iphone 4 . I don't know how that happenned that the normal color on screen and all icons changed ( for example , normally green color phone icon became purple color ,) and photo pictures turned negative appearance ( ghost-like ) . Any idea how to fix this mishap ?  Your help will be appreciated.

    Hi kshieh
    You can try two possible steps:-
    1]Triple click the home button.  You should get an accessibility menu.deselect the negative/black and white option.
    2]Go to settings->General->accessibility->and deselect invert colours.
    That should fix it
    Rithwik

  • Infotype screen headers needs to be changed for all the infotypes

    Hi Guys,
    This would be for a global implementation question.
    For the US for a particular region, the screen header needs to be changed for all the infotypes.
    The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
    The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
    When i go to Table T588J to add an entry , Screen Header 42......,
    I get an error " No Field STAT2 exists for infotype 0001"
    No field STAT2 exists for infotype 0001.
    Message no. PG811
    Diagnosis
    No STAT2 field exists for infotype 0001.
    Procedure
    Please contact your system administrator.
    Procedure for System Administration
    In Customizing, determine the incorrect entry in Personnel
    Administration in the Header structure per infotype view, step " Determine infotype header and correct it
    I would like to have some inputs from you guys ..... Any Suggessions...
    Thanks,
    Aastha

    Hi Aastha,
    Correct me if I am wrong.
    First you need to maintain the header in T588J.
    Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
    Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
    For example like
    Screen Header / Tr. Class / Header modifier
    00                    /        A      /  60
    In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
    Hope this is useful.
    Regards
    RK

  • Finder views change for all windows

    After playing around with Snow Leopard for just a few days, I noticed that when I change a view type in any Finder window, that view is applied to all windows. Is this by design? With Tiger, you could specify the view for "this folder only" or "all folders"

    Joe - I've been heavily researching this issue. I've received some helpful advice from baltow, but here is how I fixed my problem. While in Best Buy over the weekend, I played on one of their Macs running Leopard 10.5.8 to see if the problem started before Snow Leopard. It did, wasn't just me. Then I found this site:
    http://www.macintouch.com/leopard/faq.html#finder
    It said: *Why don't my window view settings stick?* The Leopard Finder's approach to consistency is to use the last view you selected in any Finder window for all new Finder windows. You can override this on a per-folder basis; go to the menu View > Show View Options (or press Command-J). This opens a view options Inspector (a mini-window much like a traditional Palette window); at the top of this window, check the "Always open in" box to force the folder always to show the current view.
    This is what was throwing me off - I thought that Always open in box was a global setting, not on an individual folder basis. With Tiger, you had two options: This window only, All windows.
    Now I will play with the Arrange By setting and see if that works as well.

  • EZT Codes mass change for all products

    Hello all,
    Currently I only find a way to change the EZT codes (european customs tariff), like Y900, for every single product in GTS (customs products).
    Is there a possibility to change the EZT Code Y900 for all products in the system?
    BR

    Hi Jörg,
    Your example is interesting, and maybe leads to further discussion...
    As far as I know, the 'Y900' code is not changing, so is your requirement to change the entries only theoretical, or do you want to delete the entries due to mistakes?
    Could you consider proposing the 'Y900' (or other) document using the Data Proposal mechanism, perhaps based on the Tariff Code, rather than maintaining the document in all Products?
    I can see that SAP have provided a Function Module /SAPSLL/PRDOC_FAE_SELECT that allows you to find all Products that have particular documents assigned.  Perhaps that could help your developer if you decide to create a maintenance program?
    Let us know if you need further assistance or sympathy with this :-)
    Regards,
    Dave

  • Hyperlink format changed for all not only new links on page

    Hi,
    The button "Use for new links on page" (in German "Für neue Links auf Seite verwenden") on the inspector dialog (hyperlink -> Format) doesn't work. It changes the format of all existing links on the page! Can this be fixed please!
    Thank you
    Thomas

    That seems to be the way that button works, right or wrong. However, send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • Trigger for logging changes(DML changes) for All tables in Schema

    Hi ,
    Is there a way to create a schema level trigger to audit the DML changes that affect all the tables.I need the output in my log table as
    1) the table name on which the DML occurred
    2) type of DML
    3) column names affected.
    I know this can be achieved through enabling AUDIT or by creating dynamically, triggers for each tables...
    Is there a way to create a single trigger to achieve this??

    It's not possible to create DML trigger on schema level
    I think the only way is to create the triggers dynamically for each table..
    Re: Schema level Database triggers by Kamran Agayev
    Edited by: jeneesh on Oct 12, 2012 6:39 PM

  • Icons changed for some unknown reason

    I am working with an iBook running Jaquar with 512 mb of RAM. For some reason the icons for Mail, iPhoto and a couple of other applications have changed from their normal icons design to the design of a folder. I have to delete the icon, thinking they would default back to the original. This did not work. The icon on the dock is even a folder. The icon for the applicaiton is a folder. I have tried zapping the pram. I also repaired the permissions. That also did not help. I have not seen this problem before.
    Any solutions would be appreciated.
    iBook   Mac OS X (10.3.1)  

    Your file association for pdfs got hosed [a technical term]. The easiest fix is to re-install Reader.

  • Attr changes runs for  all Infoobject in a process chain

    Hi,
    I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
    How can I carry out the structural changes for all InfoObject in a process chain?
    Thanks!

    yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
    I don´t know what I do?
    This process actives all my ATTR and HIER in my chain???
    Message was edited by: Victoria León

  • Turn off icon preview for everything except pix?

    I.m.o. it was a step backward in Leopard that icon previews were also made for text documents. This is nonsense. I have to see at the first glimpse what a Pages document is and what's an RTF; it's absurd to show the text preview in an icon! You can't recognize the content of a text document in 48X48, 0,01p size!
    I can only turn the previews on / off for all kinds of files. But then I can't recognize pix either, which is annoying.
    At the moment, I have made all extension visible, but reading an extension is not as fast as seeing a file's icon.
    *Does anyone know an app, hack or anything to turn previews off for everything except pictures?*
    Thank you very much
    Peter

    Baltwo,
    Thanks for trying to help me out.
    To give you some more detail:
    If, for example, in Excel 2004 I do CMD-O, then a window pops up to open a file. Top left of that window I can select the view mode for that window (3 possibilities). Now, if it is ´list´or ´columns´ view I indeed only see generic icons. However, if I select ´icons´ view (leftmost possibility of the 3), I see all icons change into previews. This despite the fact that in finder I disabled icon preview for all view modes (including ´icon´ view).
    Problem is the same in any application when opening files in ´icon´ view mode. A bit annoying.
    Thanks,
    HansC

  • How do I close multiple files in Preview on OSX10.8 without having to click on "Revert Changes" for every file?

    I opened, say, 100 PNG files that were saved in a landscape format.  So I selected all files, typed Cmd+L (to rotate left), and then viewed them for a while.  After I was finished, I tried to close all of them at once, but found I had to click on "Revert Changes" for every file?
    In Snow Leopard, an option would come up allowing you to discard changes for ALL open files.  Here, I cannot seem to find that option (if it even exists).  Does anyone have an idea?

    From the menu bar, select
     ▹ System Preferences... ▹ General ▹ Ask to keep changes when closing documents: Off

  • Setting Crystalviewer for all users in CMC

    I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference parameter in CMC -> Allications -> InfoView, but could not find away to set the default viewer for all InfoView users to the activeX control? Is this doable? If so I would like to know how.
    Any help is greatly appreciated.

    Enable preferences and go to Infoview, click oh Preferences and change the view format to ActiveX and save it. Do this for Administrator users.
    There is download available, using that you can make the same change for all users, check the below link.
    Re: Setting the same "InfoView Start Page" to all users in one group
    With that you can change the settings for all users as Administrator, once done remove the access to Preferences.
    Thanks,
    Hari

  • How to save  particular variable values for all users

    Hi Experts,
    I have variables posting period with user entry default value  and fiscal year(with entry vulaue mandataory)in 30 queries.Now user wants to set this values i.e.posting period to 0 -16 (interval) and fiscal year to 2008.
    whoever opnes the workbook he should  get the the defualt values as posting period 0-16 and fiscal
    2008 in variable selection screen.unless user enters the values it should remain same Please suggest me how to do that.Is this changes should be saved as vaintat in variable selection screen and transported or shall I do this change for all thse quesries or shall I change the variable value to default setting in variable propeties so that changes should be visible to all 30 queries .Please suggest....!!!!
    Regards
    Prasad

    Hi Prasad,
    Just go to that variables in query designer, and give the default values for the variables as 0-16 and for Fiscal year 2008.
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/ae/1e9b3c334d8c15e10000000a114084/content.htm
    Now while generating the query in the variables screen select the personalization, so that these values will be fixed and personalized for the query.
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/30ae3d47afd652e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/3f/30ae3d47afd652e10000000a114084/frameset.htm
    Rgs,
    I.R.K

  • What changes to be done when environment is changed for existing code?

    Hi All,
    I am a starter and had developed integrations in dev environment where SAP used to send and recieve files in PI7.1
    Before me doing the task, the source and target systems were registered.
    The SAP environment was PID and when we moved to test env it used to be PIT.
    Now PID and PIT env no longer exist and the envs are PI1 in dev and PI2 in test.
    What are the changes that needs to be carried out for the existing development.
    Please guide me and also if those changes needs to be done only from PI7.1 developer side or BASIS side.
    Thanks,
    Kevin

    Kevin,
    From Developer side:
    You may need to import the new business systems into Directory and needs to do all the configuration where ever you used your previous business systems. The whole configuratios needs to be changed for all the interfaces like sender and reciver agreements, reciver and interface determinations. But you can copy the communicaiton channels to your new one. And dont delete anything in DEV until unless you move your new changes to QA and working as expected. If there are any lookups in Mapping please check whether any hardcoding is done in mapping or not. (You should have not done it, but still a check).
    From Basis side:
    Your transport targets needs to be changed in SLD.
    Regards,
    ---Satish

  • Setting visible lines and blank rows for all users

    At Item Level for Shopping Cart, Confirmation and Invoice Creation there are settings for Number of Visible Rows and Number of Blank Lines (In Settings/Advanced Settings).
    How can this be changed for all users?

    Hi
    This is a user specific settings to be performed. in SRM 7.0
    Please prepare a document and educate the user to do. This is  the best solution
    Second Solution
    In Setting tabs there are two tabs -Basic Setting and Advance Setting
    check the webdynpro components and hide this for all users
    Regards
    G.Ganesh Kumar

Maybe you are looking for