Icon inclusion in REUSE_ALV_HIERSEQ_LIST_DISPLAY

Hi Experts,
We need to include an enhancement when an icon is clicked from REUSE_ALV_HIERSEQ_LIST_DISPLAY. Please advise.
Thanks in advance,
Viven

Hello Viven
In the fieldcatalog (SLIS_FIELDCAT_ALV) set ICON = 'X' and HOTSPOT = 'X' for the column where you want to display an icon. In addition define the CALLBACK_USER_COMMAND routine where you should be able to handle the HOTSPOT event.
Regards
Uwe

Similar Messages

Icon maker will not install. Says that I need "Photoshop version32 in range of inclusively between 13.0 and 13.9." I'm on v32.

Icon maker will not install. Says that I need "Photoshop version32 in range of inclusively between 13.0 and 13.9. I'm on the latest version as at last check. What am I doing wrong?

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Inclusive Free Goods Determination ?

Hi,
   Can someone dend me the config. steps for inclusive free goods determination .
Regrds,
Binayak

dear B B
please gothough this
FREE GOODS:
     It can be configure in SAP by following two methods
A)     Manually          B)     Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
     a) Exclusive          b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001-   free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2:     Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3:     control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
     Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value   = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as   a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid     periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A-   (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula:     100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
-- Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards pls
siva

Why are icons in mail tool bar not in color

why are icons in mail tool bar not in color and iphoto also

iVmichael wrote:
Monochromatic, Orwellian Dullness everywhere, totally hate the look it's a step backwards not forwards. It's absolute b****cks to say this is being 'more inclusive' when it turns so many people OFF!
Have you done a sampling of all users, or only those users that don't like it? While I don't mind it, I don't think I even noticed it at first until someone pointed it out.
I note that if you get Info on an item the icon is still colour so this is some OS level (we know best) overaly that's turning everything bland and boring, it would be nice if Apple let the user actually chose this rather than force it upon them ... just like Microsoft I'm sad to say.
Microsoft? The '90s are over. But regardless of what decade you are living in, Apple has never been too big on end-user customization of the operating system. Apple has always discouraged the use of "themes" whereas Microsoft will allow people to do pretty much whatever they want.
The file system icons are still the same as they have always been. The new monochrome icons are clearly a design trend more than any change to the underlying operating system. If you turn off the expanded view in any file save dialog (other than in Safari), you can still see the old, glorious, multicoloured icons. If you really wanted to, I'm sure you could change the system-level images and make Finder and Mail look just like they used to.

N70 - what is this icon

in this screen capture
see http://www.web0.co.uk/images/asstd/screen.jpg
I have outlined in blue an icon that has started appearing on screen.
Seeing as how the manual for the n70 is one of the most poorly written, inorganised, and unintuitive consumer product manuals I have ever seen, without the obvious inclusion of a visual guide to what icon indicators actually mean, can somebody let me know what the icon indicates?
Thanks.

This means also that you have had a sent message fail........and will stay on the screen till you remove it from the appropriate folder.

My new ios download for iphone4 lost icons on homepage they are still in the phone but do not appear on the homepage

I downloaded the new ios update and most icons dissappeared form the homepage. They are still in the phone under settings however I am unable to access them or return them to the homepage. Help!

Que tal Alfredo, pudiste resolver este problema??
Yo estoy viendo que lo que capturo en el iPhone, si lo manda a iCloud e inclusive aparece en el ipad pero desde hace tiempo en la MAC dice que "Algunos contactos del servidor no se han podido copiar en Agenda" y un simbolito del triangulo con signo admiración, o sea de warning o error.
Acabo de hacer unas pruebas...
Si capturo en iPhone, aparec en iCloud y iPad pero no en MacBook
Si capturo en la MacPro, aparece en iPhone, iPad y obviamente en Macbook
O se ael problema es que lo que llega de otro lado a Icloud, no lo baja a al MacBook!
Alguna sugerencia?

FreeHand has a new App Icon

John Nack at Adobe has published a color wheel of ALL the
redesigned application icons and color schemes.
See
it here
If you look in the south west quadrant you will see the FH of
FreeHand Icon. Is this good news for the future?

> and last night while trying the PS CS3 beta I felt that
the interface is actually similar to FHMX.
I really don't don't see how you get that. Sounds like alot
of *really* wishful thinking to me.
It looks to me that all they've done is given PS (and
presumably the other CS3 apps) a new palette docking interface.
This is something Illustrator--in typical Illustrator fashion--has
been years behind. But PS and InD already have palette docking
ability; they just didn't match. So now Adobe is (again,
presumably) building the "next generation" of the "unified Adobe
interface", which if history tells, they will probably consider
"locked in" for at least several years thereafter. If this is all
the hullabaloo is about, we're in for another many years of
behind-the-times Adobe interface, because while this would be an
improvement for AI, it is little more than a facelift for PS and
InD.
To say this is "similar to FreeHand" or even similar to the
Macromedia structure is a far stretch. There is nothing original in
the idea of simply docking palettes to the right edge of the main
monitor. The main principle that separates the MM interface scheme
from Adobe's is the use of the "contextual inspector"
organizational model, which is followed in all the MM apps. I see
nothing to indicate that in the PS3 layout. It's just the same old
palettes now able to dock in a way different from the rather
half-baked palette docker in the previous version. What's the big
deal?
The original Adobe Creative Suite apps (AI, PS, InD) all
still cling to the long-outdated model wherein you have many
separate palettes for all the separate attributes of the selection.
That's much more tolerable in a raster imagng program, because
raster imaging is not nearly so "object oriented" as page layout
and vector illustration. That is, even with all the bells and
whistles that have been added to Photoshop over the ages, you are
still working with one raster image--or a subset selection of
pixels in that one image--at a time. Yes, PS nowadays stacks
several images with the same resolution on top of each other and
calls them "layers." And in recent years, it even allows you to
place vector clipping paths within those "layers" and calls them
"shape layers."
But that's all still a far cry from the object-oriented
nature of vector drawing programs.
Way, way back (when was it? FH3? FH5.5?), FH was rebuilt upon
the more modern (and profoundly more efficient) "contextual
inspector" model. From that day forward, you no longer had to go
scouring all over a kazillion separate palettes to set the selected
path's fill, stroke, overprint attributes, etc., etc. It is all
right there in the fully contextual Inspector Palette. (It was
actually called the "Inspector Palette" back then. It was changed
to Object Properties when a stylistic uniformity was applied across
the other and newer MM apps.)
The only CS app which comes close to a true inspector-baed
interface is the one Adobe didn't author: GoLive. (We won't even
get into Acrobat's completely arbitrary interface, which
matches--well--nothing.)
When MM stylistcally unified the interfaces, it also made
them dockable to the right edge of the main monitor. But that
docking aspect is a far less important difference from the old
fashioned interface scheme than the functional reorganization of
the contextual inspector model.
*That's* the crucial difference between MM's stylistically
unified interface and Adobe's. This is best seen by comparing not
the schemes of FH and PS3; but those of FH and AI:
Setting mere palette docking aside, In both programs you
still have a separate palette for mixing colors, for storing
swatches, for defining styles, etc. But the real difference is both
subtle and profound. In AI, those individual palettes don't only
create and store all those myriad settings, but they must be used
to *view and apply* them.
In FH, you work far more efficiently by using the various
palettes to create and store settings, but you *view and apply*
them in the context of the current selection in the all-inclusive
and much more informative Object Properties palette. Defined
(stored) swatches automatically appear as selections in the
Properties pallette's popup menu. Same for styles, brushes, stroke
weights, overprint attributes--you name it.
The Object Inspector becomes your one-stop-shop for
everything you need to know about the current selection. It tells
you the number of points in the path; the effects applied; its
position and dimensions; its overprint attributes, its applied
styles, and on and on. So it tells you everyting about the
selection that AI's Appearance Palette does, but much much more and
in a much more concise and organized way (and in less space).
It is fully cotextual. For example, subselect some points and
you can change them from corners, curves, or connectors; retract or
extend their handles, right there in the same place you looked for
whole-object attributes: the Properties Palette.
Understand this is quite different from a limited "control
bar" like AI CS2's much ballyhooed but anemic Control Palette. That
kind of thing merely shows you a grab-bag collection of someone's
idea of the "most commonly needed" settings. For example, you still
have to dig for the ill-conceived Attributes palette to see if one
of the object's fills or strokes is set to overprint; or to a
buried sub-menu selection of the Document Info palette to see its
number of points.
That last is a good example. I ask you: What would compel a
new AI user who wants to know the number of points in a path, or
whether it is open or closed, to go look for something called the
Document Info palette?
Do you see what I mean? AI's dated, scattered, and cluttered
interface is what makes it so difficult for new users. New users
then mistakenly perceive "difficult" as "sophisticated" or
"powerful" when in fact quite the opposite is true. Proficient FH
users know this. The better organizational scheme which makes
finding settings more understandable and less frustrating for
newcomers also makes every moment of every workaday situation more
efficient and less tedious for proficient users--even long after
they've learned where all that information resides in AI.
The closest thing AI has to the concept of an object
inspector is not its Control Palette, but its Appearance palette.
But this also falls very short. It now shows the weight of each
stroke, and whether it is set to overprint, but doesn't let you
*change* those attributes. It doesn't tell you what its color
values are, or what kind of endcaps and joins it has. It indents
the individual strokes, fills, and effects under its item type
(path, compound path), but clicking that item type listing doesn't
provide the object-level attributes ( number of points,
open/closed, winding rule).
So AI's Appearance Palette and Control Palette are both mere
*pretenders* (and strain) to a proper object inspector, but both
leave so much out that they end up *adding to* the overall
palette-glut rather than serving to alleviate it. Neither of them
can be trusted to provide information complete enough to let you
chose to leave other palettes closed.
The difference has little to do with style. It has everything
to do with organizational efficiency. That's why just giving AI
dockable palettes (although long overdue) will still fall very very
short if it is not accompanied by the other side of the coin: a
thorough and careful rework of its functional organization.
I take no encouragement at all in the PS3 preview to suggest
that Adobe now "gets it" about the true advantage of their acquired
MM apps' interfaces. In fact, quite the contrary.
JET

Suport for 96x96 icons for Android

Any chance AIR 3.7 and Flash Professional will add support for 96x96 icons for Android deployments? This is becoming a much more popular icon size on newer Android devices.
Thanks!

Hi... I notice that the most recent beta (1820) has an item in Notable Fixes and Enhancements that would indicate support for 96x96 icons on Android - (3504874 - [Android] Android xhdpi icons (96x96) are not supported). At least I interpret its inclusion in this section means it was fixed.
Are additional updates to Flash Professional product required to take advantage of this. I installed this version of the SDK and don't see 96x96 as an option in the Android Settings. Also if I manually modify the application.xml and add an entry for a 96x96 icon, it is stripped out when I publish.

Appli Android // Intégration d'icones personnalisées // Plantage de Flash

Bonjour,
Flash plante pendant la publication après intégration des icônes personnalisées dans l'onglet "ICONES" et FICHIERS INCLUS" des paramétres de publication (PNG transparent).
La version sans icônes fonctionne parfaitement.
Quelqu'un a t il une idée a ce sujet ?
Merci
je précise.
Je travaille sur Flash CC. Donc quand je publie mon application (.apk, Android)
> Paramètres de publication > Cible AIR 14 for Android, AS3
> J'intègre mes icônes personnalisées (PNG)
> J'inclus mes fichiers icônes (Onglet Général)
> Je publie mon application
> ET PENDANT LA PUBLICATION, FLASH PLANTE
Je précise que la publication avant intégration des icônes ne pose aucun problème. J'en déduit que ce plantage est causé par l'intégration des icônes.
Merci de votre aide

Bonjour,
Je ne peux pas répondre en détail mais une chose est certaine : pour publier une app sur l'App-Store il faut un Mac.
Apple fait tout ce qui est en son pouvoir pour rendre cette exigence incontournable.
Je ne sauis pas quelles bidouilles sont conseillées pour passer outre mais souvent il ne faut pas chercher plus loin.

Inappropriate Flashing of "New Call" icon in BT Co...

Forum Help,
I have recently purchased a BT converse 2300 'phone which works as expected in every respect except that the New Call icon flashes inappropriately if a call is answered at an extension. My understanding of the New Call facility is that it is intended to advise the user of missed calls. However, this feature is largely masked if the New Call icon comes on inappropriately as in this case. Whereas the New Call icon should only be displayed for unanswered calls this useful feature is obscured by the inclusion of calls answered at an extension. As a consequence of this the individual deletion of each extension answered call is necessary if the facility is to display an uncorrupted record of missed calls during one's absence.
Has anyone else experienced this problem? If so I would be grateful for your advice.

See http://community.bt.com/t5/Phones/Graphite-2500-how-do-I-stop-new-call-appearing/m-p/510499#M17626
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

PSE icons instead of the photo. I need to view photos at a glance. Please help me????

Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
Leica

Hi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I am trying to open Firefox. I have changed from Beta to 3.6, neither came up on my Icon. got to registration which last night was told that it was authenticated now can't get any help. Please no more lists I need person to help me. Can't get Chats

Firefox will not open. If I click the icon I get a less than oe second flash of Firefox on the bar and then its quickly changes to Finder.
I have tried many different User names/Passwords that I no longer know which one is used. Please I have spent hours just trying to get connected to Firefox and cannot do it. I need to open Firefox for some documents for my job or I will lose the job. I wrote
all of this to you last night and was told than I was connected. Today I connected the old proxy and think that I have cleared that up. Should I drop the old Icon in trash, throw it away and start with either 3.6 or beta. I really need some help and will
of necessity being going out shortly. What shall I do? Help

Nobody can help you without proper system and version information or other technical details. if the update is botched, then run the cleaner tool and reinstall from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

I'm on ff 3.5.5 for Mac. I've been prompted twice to download latest version. Each time I have dragged the ff icon from applications folder to the dock and all seems ok. But next time I start ff it says I'm on 3.5.5 and should update to latest version!

There was no "update failed" message
I wonder whether I'm doing the right thing when I drag to the dock. There's only one ff icon in the applications folder. The first time I was prompted to update it showed that days date next to the icon as if the update was successful. The second time was a few days later but I think it was still the same date next to the icon (25/8/10) I've only just noticed that (on 10/9/10) so can't be sure but I'm sure the second time was around 2nd or 3rd of Sept.
Also, I am running two versions of ff- one is english, the other is the Italian version. They can't be opened at the same time but they seem to talk to eachother in the background, so to speak, because when I open one after a long gap, it opens with all the history and settings of the other one, right up to the last website I went to. I think I closed both when updating because it prompts you to close all programmes and restart (I think/ remember) so I just clicked ok to that prompt.
By the way, I got the prompt to update twice for ''BOTH'' the Italian and the English version- so 4 times altogether so it would seem that ff does recognise them as separate but still has problems concluding the update for each separate one respectively.
Thank you very much if you can help.
Trapperjohn

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Icon inclusion in REUSE_ALV_HIERSEQ_LIST_DISPLAY

Similar Messages

Maybe you are looking for