ICR: FBICS3 selects cleared documents and old documents

Hi, I have just gone live with ICR functionality (processes 002 & 003) and I have notice that FBICS3 transaction is not working as I expected:
1/ "Old documents": If I set in the program FBICS3 "year = 2010" & "month = 01"" I expected that the program would select document posted on period 1 year 2010. The reality is that the program has selected data from 2007 to now. I am surprised but probably the problem is that I did not understand how FBICS3 select data. I assume It is correct and was my error. Since fiscal year and period are used to determine the key date of open items (open items "opened" at mm yyyy).
2/But my real problem is that FBICS3 has selected cleared items and shows them on FBICA3 which I am sure is not correct.
Does any body know if there is a SAP note that applies on this issue?
Thanks a lot

In order to give more information:
I have already implemented following SAP Notes
1159776     ICR: Select data from newGL     FI-GL-GL-G
1235689     ICR: Runtime error TSV_TNEW_PAGE_ALLOC_FAILED     FI-GL-GL-G
1337276     ICR: Cleared documents are not deleted     FI-GL-GL-G
Thanks in advance for your help

Similar Messages

Reset Cleared Documents and Vendor Open Items Report FBL1N

Hi all,
I have following scenario:
- In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
- In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
Thanks and Regards,
Dau

Hi Dau,
If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
Now in Feb 2012 you reset and reversed this payment document.
The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
so I think your issue is with the key date.
Hope this helps you.
Regards,
Prasad

Clearing date and Posting Date of a clearing document

Hi,
We have seen some cases in our system in which the clearing date and
clearing posting date of a document is older than the creation date of
the document.
Please guide me: Should the above describe case be happened or allowed
to be happened?
Can we stop these kind of postings?
Please guide.
Thanks and Regards

MP,
Please try to pass the following values
SELECTIONCONTROL structure:
CLEARED_ITEMS = space
OPEN_ITEMS = X
STATISTICAL_ITEMS = space
KEY_DATE = 20091016 (today yyyymmdd)
MAINSELECTIONS structure:
SELE = 0000
BUSPARTNER = BP number
CONT_ACCT = contract account number
CONTRACT = contract number
At least either BP, CA or contract number must be passed in this structure.
The BAPI will return in BALANCEITEMS the selected relevant items (for example, disregarding what happened after the key date)
I hope this helps.
Kind regards,
Fritz

We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.

Hi Mahesh,
To display a document, proceed as follows:
Tcode : FBL1N (Vendor Line Item Display)
1-Select option's.
2- List
Regard's.
Cem Ates

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

Resetting and reversing a cleared document

Hello
I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
Thanks in advance
Evelyn

Hi,
There are only 2 controls allowed for Reversal reasons:
1. Negative posting
2. Alternative date for posting
The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation. An order reason can only restrict it to current date or allow any other date. At least that is what I have experienced.
Cheers...

Reporting for clearing, residual and payment of AR documents

The request is to create a report (ALV) that will show the billing document/accounting document, the clearing document with amount, the residual document with amount and if it is a shortpay.
The BSEG and BSAD tables have been looked at but some cases are not easy to break apart to code.
Is function module available that will generate this information?
Much appreciated!

BSEG provided all the answers, but the coding to get all the required information is tricky and complex.
Start with the invoice document and get the clearing document. This could be a DZ or an AB. If an AB, go back to BSEG and find the DZ using the clearing document. Finally, get residual using the AB where the document is both the clearing document and the document number.
Many variations can exist so be sure to check for business process on how clearing is accomplished.

Posting date and clearing date different in G/L clearing document

Hi Friends,
While clearing a G/L manually using F-03, the clearing date is entered in the selection screen.
The clearing document which is posted is posted with the posting date same as the clearing date mentioned in the selection screen of F-03.
In what situations can the posting date of a G/l clearing document be different from the clearing date?
Regards,
Shilpi

Hi,
The Clearing Date in F-03 is actually the Posting date, so in this case the posting date will be same as clearing date. But a clearing document can also be created when you reverse a FI document, in this case the Reversal document will have a clearing date different than posting date. Let me know if this info helps you

What does it mean,resetting of clearing document and reversing of clearing?

Hi SAPians,
Suppose my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?and the accounting impact will be like debit items will become credit and viceversa.but my doubt is if i only reset the clearing doc.no by FBRA then what will happen and what will be the accounting impact ? and what will happen if i reset with reverse the clearing doc. and what will be the accounting impact?
Regards,
Sumeya offrin

Dear Sumeya,
You have written "my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?"
You cannot reverse a cleared document in fb08.
Now let me answer you other questions.
Say for example you have posted a document no. 100005. Then using FB08, you Reverse it and a new CLEARING document no. is generated, say doc. no. 100006. So out here whatever entry posted in doc. no. 100005 gets reversed in document no. 100006. (ie. debit becomes credit & vice versa). This document no. 100006 is your clearing document. Now, both documents, ie. 100005 & 100006 contains no open items. Both documents are cleared against each other.
Now when you only reset the cleared document no. 100006, it becomes an open line item document. There are no financial impacts. But, when you reset and reverse the cleared document no. 100006, a new document number is generated, say for example, document no. 100007 which is a reverse entry of document number 100006. Most importantly, document nos 100006 and 100007 gets cleared against each other. Both, document number 100006 & 100007 are cleared documents. There is a financial impact out here and the original document no. 100005 becomes an open line item document.
It will be a little confusing if you read it once, but put this example on a paper & then analyse, am sure your doubts will be cleared.
Hope this helps.
Regards,
Amit Maniar.

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

Select RTF Data and display in PDF Document

Hi all,
I have a simple table:
CONTENT_ID - NUMBER
CONTENT - VARCHAR2(4000)
On top of this table I have a form that allows the user to enter / update data. The 'CONTENT' field is a Rich Text Editor (ApEx 4.0 - CKEditor 3). This allows the user to enter and format their text as they require.
I need to be able to select this data and display it in a PDF Document (via BI Publisher).
I therefore have a simple query
select content from content_table where content_id = 1;and a simple template that processes the resulting xml:
<?xml version="1.0" encoding="UTF-8"?>
<ROWSET>
   <ROW>
      <CONTENT>& lt;h2& gt;
     This is a heading& lt;/h2& gt;
& lt;p& gt;
     This is the text& lt;/p& gt;
</CONTENT>
   </ROW>
</ROWSET>(There is not really a space between the & and 'lt' etc but I had to add this to get it to display correctly here).
Where I run this past my template I get a PDF with:
<h2>
This is a heading</h2>
<p>
This is the text</p>I get the same if I generate HTML.
but what I want to see is the text formatted as the user has entered in the RTF editor.
Can this be done?
Many thanks,
Martin

I think your mixing 2 technologies.
At 1 side you have xml in combination with xsl (style sheets used in BI Publisher and FOP) to generate your pdf. And at the other side you have HTML...
XML and HTML are 2 entirely different technologies which you can not mix this simple. I investigated the same problem as you had, and in the end I ended up using jasperreports instead of FOP.
Maybe BI Publisher has some html regions which you could insert into your word document but I doubt it cause more people have asked the same question on this board...
So my advice: use jasperreports (also it is free for commercial usage)
Success
Br,
Nico

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
PS CC is up to date
Running OS 10.10.2
HP Printer updated
Help?

Have you printed to this printer from 10.10 before? If so, check your connections.

F.13 automatic clearing question and F-03 generate document question

Hi Experts,
I have two questions below.
1. What's difference between F.13 and F-03?
Due to when I use F.13 to automatic clearing GL account, we found out that the system generates docuemnt has content.
(use Fb03, check the document number and found out the Dr and Cr account)
But when I use F-03 to manual clearing GL account, but we found out the system generate document has not any content.
(Use FB03 to check the document number, but I cannot found out the Dr and Cr account)
2.I intend to use F.13 to automatice clearing one GL account. My question is that whether the system could use FIFO to automatice clear document under matching condition.
Regards,
H.J.

Hi,
I follow up your suggestion to set rule of automatic clearin on OB74.
Criteria 1 : ZUONR (Assignment field)
Criteria 2 : GSBER (Business Area)
Criteria : VBUND (Trading Partner)
I had to set up the above criteria.
how to add up (0.00) for setting?
Regards,
H.J.

Clearing document and offseting document

Dear expert,
Would like to seek for your advise, why clearing document with status clearing had no line item appear/posted in the document and document type DL-AR Bill offset with document status A=clearing document also do not had line item in the document.
Also vendor payment document type= KZ with document status=A (clearing document) do not had line item in the document.
Kindly also advise how the clearing document work/posting and also the reversal of the noted item document do not had line item?
Please help.
Regards,
KH

Hi Prakash,
Thank you for tne reply.
My question as below:
1)Why clearing document with document status=A there is no line item in the document?
2)Why some of the clearing document will have line item in the document?
3)Does clearing document with document status=A which is without line item int the document will store/post to table BKPF only and will not post to BSEG table?
Hope you will understand my question.
Many thanks.
Regards,
KH

ICR: FBICS3 selects cleared documents and old documents

Similar Messages

Maybe you are looking for