Identify Jobs that are not running on their Scheduled date time

I have 29 scheduled jobs that run at different intervals of time. Some run once a day. few others run on hourly basis while others run on Sundays.
I was working on a query that would let me know if a particular job did not run on its scheduled date and time.
SELECT * from all_scheduler_jobs WHERE state <>'DISABLED'; will give me a list of all jobs that I have to monitor and that are not in the disabled state. But how can I verify that the jobs are running at their scheduled date time?
Any help please? I need to create a view of all such jobs and then plan to send an alert so that appropriate action can be taken and it is assured that all important jobs run as per schedule.
Thanks.

Hi,
I can see 2 approaches.
- for jobs that have run but ran very late you should query dba_scheduler_job_run_details and filter by the difference between req_start_date and actual_start_date
- for jobs that should have run but shouldn't, query for DBA_SCHEDULER_JOBS jobs that are SCHEDULED where next_run_date is in the past
Hope this helps,
Ravi.

Similar Messages

List of games that are not running correctly or does not run in ICS update

I hope to start a list for apps (esp games) that does not run after the ICS update.
Kindly list the game name along with the error. Hopefully its not off topic.

Since many of us having issues with gaming [both HD and Non-HD] after updating to ICS, so i decided to share a little bit of info regarding gaming performance in ICS.
For the gaming troubles we are not yet sure whom to blame? SONY, ICS or the Game developer.
1. Few game developers said that their 3D engine is not yet compatible with ICS.
2. No response from Google yet.
3. Sony was suppose to update their Graphics driver [Adreno] in ICS, so we were expecting better gaming experience, but in reality it declined. [Hoping to solve in 4.0.4, if SONY releases]
Remember Gaming performance and experience can be different depending on device, application version etc. Results stated below may not be same for all.
Few Gaming updates from different users:
# Angry Birds Space : For some it worked/some not working [Worked for me]
# Temple Run : Touch Control issues [ Game Developers said that their 3D engine is not yet compatible with ICS]
# Fruit Ninja: Some reported it lags. The speed of movement is slow.
# Asphalt 6HD : Works but some weird lines appears in the screen.
# NOVA 2 HD : Runs for 2-3 mins then force closes.
# Backstab HD : Runs for 2-3 mins then force closes.
# Dead Space : Working well till now.
# MW3: Working.
# Fifa 12 : Not working for me.
# Shadow Gun: Not Working.
Now it was advised that you must use the latest version of the games available in Google play store. The version worked in Gingerbread may not work in ICS. So it is recommended that you download the latest version of the games you want to play in ICS.
**Before Downloading you can also contact the developers if the games has any compatibility issues with ICS or not.
Message was edited by: Auni

How to identify SQL_PROFILES that are not being used?

In dba_hist_sqlstat table were found 26 Sql_Profiles, some of them are not used.
Questions:
- Is there any way to identify which one are not used?
I tried verifying DBA_SQL_PROFILES but this does not help to much.
- Analyzing one by one, Is the only way to find why they are not used?
Thanks,
Deyanira

Hello;
You should be able to Join the views DBA_USERS and DBA_PROFILES to see whats in use. ( or not in use )
select distinct
profile
from
dba_profiles
where
profile not in ( select profile from dba_users ) On the second question I would ask the DBA.
Best Regards
mseberg
Dan is correct. I have misread the question. Sorry about that.
Edited by: mseberg on Jun 28, 2012 3:06 PM

Method needed to identify Contacts that are not valid from the Comp Screen

Problem
My Company has 65k contacts in the system, we do not delete contacts that are no longer at company, as when we buy data our data in some cases will be more up to date that the third party data available on the market. This then means when a user looks at a company record and the related contacts, he has to hover the cusor over each of the contacts to check if they are valid or not.
Goal
When a user looks at the contacts linked to the company the following fields will be presnt:
Contact Valid
Contact Leave Date.
This will then mean the user will be able to see without looking which contacts are valid and which are not.
Problems
I have tried to create a contact page layout with the fields needed however the only fields avaiable are as follows:
Company ID
Company Name
Company Status
Contact ID
Contact Name
Contact Roles
Location
Primary
Can anybody help?

Thanks for the reply.
However I think I didn't make myself clear in my post in terms of the problem. The problem I have is that when a user looks at a company (account) record the user see the following information in relation to which of the available contacts to select "Primary,Last & First name,Job Title, Contact Role, Work Phone and Email". However none of these fields show if the contact is valid or if they have a leave date.
Both Contact Valid and Contact Leave date have been set up in the system within the contact record. I want to change the layout and have spent hours in the following screens and functions.
Page layout Management
Company/Contact Related Information layout
Related Information Setup
Company/Contact page layout
The problem is the screens/functions where I think I could add the two above mentioned fields end up with me turning the fileds into required or read only fields, and the section where I want to drag in the fields to display has the two fields missing.

Identifying tracks that are not in the iTunes Music Library

I've got about 12,000 songs in my iTunes Music Library. Suppose I want to remove some of them, say 2,000 of them, and keep the files. The files will then remain on my computer but not show up in iTunes.
Is there a utility that will display tracks that are in the iTunes Music folder but are not in the music library? I am sure I will not be able to keep track of which 2,000 tracks I took out of the library. Which means I could forget forever that I even have the music. I thought I saw a reference to a way to do this but I have not been able to figure it out.
Thanks.

I've got about 12,000 songs in my iTunes Music Library. Suppose I want to remove some of them, say 2,000 of them, and keep the files.
I would create a new folder and drag these songs from iTunes to this folder then delete them from iTunes and click Yes when it asks to delete from library and delete form hard drive.Delete

Manual Sync: Identifying songs that are not in my iPod

Guys, a noob question for sure. But all my searches did not yield relevant answer for this one.
My setup is manual sync (iTunes 8, iTouch 2.0). How can I readily identify songs that only in my library but not in my ipod?
Thanks a lot in advance.

Well, my problem is a little different.
I chose manual sync for me to decide what song I want to keep in my iPod. But the issue is when you have a large collection in your library, how can I readily identify if a particular track is already in my ipod or not?

After 10 attempts I still cant get flash player to install, I've uninstalled it each time,but still get the same message, that i need ot exit programms that are not running. explorer is ok.

Hi there after firefox updated flash player stopped working so I was asked to update that too, I have tried both the direct x and plugin types and have installed and uninstalled it 10 times the same message comes up, halfway through the install process, that I must exit programmes that are using flash player, which since I have supposedly uninstalled it seems nonsensical, internet explorer seems unaffected, except when I uninstall flash player. I have followed all the instructions that appear on screen

You have Shockwave Flash 10.2 r152 installed in the browser that you used to post here. Best to uninstall that version before installing a later version.
As far as that message, Firefox needs to be closed before starting to install the Plugin version of Flash, so that Adobe can install the plugin for Firefox.

2 cas server drives that are not running at the same capacity

we have 2 cas servers running the same data but this year the one c drive is using more space than the other server.
besides cas1 being the primary in the NLB what else in exchange would be accumulating space on the c drive?
TM

Well,
Any Exchange user activity is logging in inetpub folder, so
according to
The Theory of Chances I have a supposition, that most active users have connected to CAS1 more often than CAS2. :-)
Similar cases are:
http://social.technet.microsoft.com/Forums/exchange/en-US/81718221-2165-427f-b587-28b093d20d11/what-causes-the-cinetpublogslogfilesw3svc1-to-grow-so-rapidly?forum=exchangesvradminlegacy
http://social.technet.microsoft.com/Forums/exchange/en-US/9dc5c09d-629d-452c-a737-3589c737649b/inetpub-folder-log-size-exceeding-abnormally-on-hubcas

Application manager shows apps that are not installed as Up-to-date

Flash and Premier pro not on my computer, application manager says they are Up-to-date
Edge Animate is in the applicationfolder, AppManager asks me to install ...
Did a restart of the computer, did try an uninstall but the applications don't show,
did a P-Ram cleanup,.
Rudy

Rudy please see Creative Cloud AAM lists Applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to resolve your current difficulties.

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Determining indexes that are not used in 10g

Is there a way to identify indexes that are not utilized in 10g? We have ADDM and AWR running nightly.
Thanks in advance...

You can enable index monitoring with
alter index <index_name> monitoring usage;
When the index is used V$OBJECT_USAGE.USED column will be set to YES. If the index is not used the USED column will show NO.
test@ORCL> alter index i_test monitoring usage;
Index altered.
Elapsed: 00:00:00.04
test@ORCL> select * from v$object_usage;
INDEX_NAME                     TABLE_NAME                     MON USE START_MONITORING    END_MONITORING
I_TEST                         TEST                           YES NO 01/04/2007 07:52:21
Elapsed: 00:00:00.04
test@ORCL> explain plan for
2 select object_id from test;
Explained.
Elapsed: 00:00:00.10
test@ORCL> select * from v$object_usage;
INDEX_NAME                     TABLE_NAME                     MON USE START_MONITORING    END_MONITORING
I_TEST                         TEST                           YES NO 01/04/2007 07:52:21
Elapsed: 00:00:00.00
test@ORCL> select count(*) from test;
COUNT(*)
     50425
Elapsed: 00:00:00.00
test@ORCL> select * from v$object_usage;
INDEX_NAME                     TABLE_NAME                     MON USE START_MONITORING    END_MONITORING
I_TEST                         TEST                           YES NO 01/04/2007 07:52:21
Elapsed: 00:00:00.00
test@ORCL> select * from test where object_id =1;
no rows selected
Elapsed: 00:00:00.07
test@ORCL> select * from v$object_usage;
INDEX_NAME                     TABLE_NAME                     MON USE START_MONITORING    END_MONITORING
I_TEST                         TEST                           YES YES 01/04/2007 07:52:21
Elapsed: 00:00:00.00
test@ORCL>You turn of index monitoring with the following:
alter index <index_name> nomonitoring usage;

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Program To Identify the BP that are not assigned to transactions.

Hai guys,
I want to identify ALl the BPs that are not assigned to any of the Transactions like Oppurtunities,Activities etc in our system,
I can run report bu using the tables But000 and CRM_ORDERADM_H.
Is there any easy way i.e a standard program in the system that does the work.

Follow these steps to get the list of BP's assigned to transactions
1. Copy the order GUID's from CRMD_ORDERADM_H
2. go to table CRMD_LINK paste the copied order guid in place of GUID_HI and copy the GUID_SET.
3.go to CRMD_PARTNER and paste the above copied CRMD_LINK GUID_SET in place of CRMD_PARTNER GUID and copy the PARTNER_NO
4.Go to BUT000 paste the above copied CRMD_PARTNER PARTNER_NO in place of GUID and get the partner number.
Hope this helps out.
Thanks,
Thirumala.

Jobs in oracle are not running properly -

Hi
In my database i have some 10 jobs and they are running successfully but the next date is not getting updated to athe new interval. Because of that the jobs are not running furhter.
Is there any solution for this
Oracle 9.2.0.6
O/S linux
Rp

RAJ> @JOBS2
scheduled jobs
Last This Next Run
WHAT LOG_USER Job B fail Date Date Date Interval
DQ_UPDATION; DOTSOFT 124 N 0 11-NOV-08: 15:59:35 : 16-NOV-08: 15:59:35 5.00
P_SEND_PG_MAILS; DOTSOFT 250 N 0 14-NOV-08: 02:00:03 : 15-NOV-08: 02:00:00 1.00
PLRANL; DOTSOFT 83 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
P_MAIL_DIS; DOTSOFT 492 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRSJOBS; DOTSOFT 106 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
bill_net_os_details_proc; DOTSOFT 24 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRS_REPEAT_UPDT; DOTSOFT 674 N 0 14-NOV-08: 07:00:03 : 14-NOV-08: 15:00:00 .33
FRS_REPEAT_FAULT_UPDT; DOTSOFT 675 N 0 14-NOV-08: 07:00:05 : 14-NOV-08: 15:00:00 .33
portal_application; DOTSOFT 692 N 0 14-NOV-08: 07:02:01 : 14-NOV-08: 08:02:01 .04
an_printpack.an_process(sysdat DOTSOFT 532 N 0 14-NOV-08: 06:35:40 : 14-NOV-08: 07:05:40 .02
e-1,sysdate, 'DOTSOFT', 'D');
MONTHCRON; DOTSOFT 164 N 0 11-NOV-08: 15:59:35 : 11-DEC-08: 00:00:00 29.33
npc_scan_job; DOTSOFT 392 N 11 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
RECON_ALLPAID_PKG.RECON_ALLPAI DOTSOFT 228 N : : 18-NOV-08: 16:48:15
D;

Identify special characters that are not supported by an embeded font

Hi!
I'm useing embeded fonts as CFF in my flex 4.5.1 application and I have problems with the special charcters like Ă, Â, Î, Ș, Ț or arabic text, that are not included in my embeded font. This are displayed in my RichEditableTect component useing the default font (Arial).
Is there any way to block the user when he tries to add such characters?
Or can I identify them before saveing , in order to format the text like <Text Font="ExoticFont"...>Hello<Text font-family="Arial">ë</Text></Text> ?

I think you want to use Font.hasGlyphs. If you are using the @font-face directive it is hard to get to the Font class so you may wish to switch to using the directive.

Identify Jobs that are not running on their Scheduled date time

Similar Messages

Maybe you are looking for