Information about pending results recording in CO11N

Dear Friends,
We are using SAP 4.7. In this we are using 03 inspection lot for inprocess inspection. At present my user have come up with a requirement which is as mentioned below.
1) While posting qty in CO11N, if the inspeciton results for characters are not recorded, then system should stop the confirmation.
I checked for this functionality and found that this is available in parameters for order confirmation.
But the requirement from user is different. i..e, to take the print out of the characters that are to be checked in each operation, the MIC is defined in each operation, but actual results entry will not be done in each operation but only at the finish operation. Due to this configuration change, system expects results entry in each operation.
I also changed the control indicators in the respection MIC as "No results recording" but the problem doesn't get solved. I believe that system proposes the results entry by checking the presence of MIC in the routing.
How to achieve my requirement.
Experts help expected.
Regards,
M.M

Dear Magesh
Using the standard functionality of configuration of parameters of operation confirmation will not serve the purpose. As I have understood you i think you need the system to allow CO11N for all other operation except the final operation.
If this is the requirement i think this can be accomplished only through user exit. Remove the configuration of parameters of operation confirmation .Make use of this user exit CONFPP05.
When the last operation is getting confirmed through C011N then check whether results have been entered in all operation. if yes allow CO11N to confirm otherwise give an error message
Please let me know if you have any issues
Regards
Gajesh

Similar Messages

About results recording in QM

Can anyone tell me about the flow of results recording in T-CODE:QE51,I want to know the flow in detail and related tables in the process.Thanks in advance!

some of the used tables:
qals, qapo, qpmt, qpmk, afvc
You can record in QE51 (QE51N) the results you get during quality inspection.
According the selection screen the system will show you a list with the inspection lots.
Choose one inspection lot and do the result recording for the operations. Or for the lower level: per sample.
Depending on the characteristic you choose a value with F4 help or key in a value (eg. length, diameter). After key in the necessary data, you CLOSE the operation (see the pushbutton ICON_LOCKED). Go to the next operation/sample.
Once you are leaving the QE51 you can go to make the Usage Decision via QA11 for the inspections lots you did the result recording before.
Rgds,
JP

I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

Moving this discussion to the Creative Cloud forum.
360medlink if you are facing difficulties with your account then please contact our support team directly at Contact Customer Care.

Error While saving the tabulator results recording(QE71)

Hi Experts ,
through the Tcode QE71 i'm recording the inspection points and the inspection results but while Saving the recorded results , the system is giving error as " No Orignal values " and also as "inspection Pt 99999 of the Characteristics .....is not avaialable".
What might be the possible reason for the same. But when i'm entering the results through the Tcode QE01 all the results are saved and closed.
Can anybody help me out of this.
B'regards
Krishna

Hi,
Can you call your web service using jQuery not in an app successfully?
As the error message suggests, it might be an error on the server side.
I suggest you do a simple test to check whether you can call the web service using jQuery.
Here are two links would provide more information about troubleshooting this error for your reference:
http://sadomovalex.blogspot.com/2013/08/return-json-from-asmx-when-call-it.html
http://www.codeproject.com/Tips/761116/Troubleshooting-an-Issue-With-Calling-an-asmx-Web
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Displaying operation long text in results recording screen

Hi, all!
I am trying to understand why I cannot display the operation long text when in results recording screen (either QE51N or QE01 transaction will not support displaying of operation long text).
I have checked all areas that I could think of in config to see if there is a display setting that will require to be activated and I could not find anything under Results recording, Inspection planning or General settings. I also tried to see if user settings may be making a difference and it did not. The SAP Help portal when talking of long texts available in results recording lists the following: Long texts for inspection lot, inspection method and inspection charcateristic. Nothing about operation long text.
However, the text is printed on the inspection instruction standard form.
SAP Notes has nothing on the subject that I could find.
So, as a last resort, I would like to ask if any other Quality Management specialist came across this and spent any time in determining if this can be done and why the information would not be displayed standard in the transactions. My client would prefer not to have to print the instructions in order to see the entire text. However, I do not see any standard way to have it displayed.
Any help would be greatly appreciated.
Thank you in advance!

Hi Senthil,
Don't know it will help or not. But if your MIC is qualitative then you can use the long text of catalog code in QS42.
Please refer below screen,
Click on the which help to maintain the long text.
Regards,
Sandip

Recording Dates in Results Recording

Hi.
I have an inspection with a task list. Several samples will be tested each time an inspection lot is created. I have a number of MICs that are quantitative / calculated to determine results of lab testing - this is all working great. The problem is that for each of my samples I need to be able to document general information about the sample. The types of information that needs to be documented are, for example, dates and sample numbers (not serialized using SAP).
Primarily these dates need to be used to generate date range specific reports of the lab results. It is for this reason that I do not want the users documenting dates in the inspection description field in results recording.
Does anyone know if using the QM_INPUT_PROCEDURE BAdI can the result field of a quantitative MIC be formatted as a date? Or has anyone had a similar problem that they have been able to solve? Is Sample Management / Physical Samples the direction to take?
Thank you very much in advance,
Cristin

Ok. Here's one way around this.
You can read this post:
http://sapfans.com/forums/viewtopic.php?f=27&t=14682&p=43885&hilit=datecharacteristicinspectionlot#p43885
But basically you use numeric MIC and the date is recorded in the form yyyymmdd. So for today it would be 2010622. You can even set a spec range at the begining of each year. So the range would be 20100101 to 20101231. This could help cut down on typos as well.
This number then gets copied to the batch record to a linked hidden numeric characteristic. A dependency is used to convert the number to the appropriate date. The dependency then updates a second characteristic with the date. It is this second date characteristic then that you can use in your reports. If you want to make sure the date formatted characteristic is changed due to additional testing or sampling you can include an IF NULL or an IF INITIAL statement in the dependency so once the characteristic has a value, it wouldn't be updated if the dependency was called again.
I am guessing each blood donation is being set up as a separate batch number.
FF

Need information about retail project

hi all
tommorow i had a interview with my client.
i need information about retail project.
like terms and business process overview .
documentaiton can be sent to: [email protected]
points will awarded for sure.
kiran

Hi Rama
Retailing consists of the sale of goods or merchandise, from a fixed location such as a department store or kiosk, in small or individual lots for direct consumption by the purchaser.[1] Retailing may include subordinated services, such as delivery. Purchasers may be individuals or businesses. In commerce, a retailer buys goods or products in large quantities from manufacturers or importers, either directly or through a wholesaler, and then sells smaller quantities to the end-user. Retail establishments are often called shops or stores. Retailers are at the end of the supply chain. Manufacturing marketers see the process of retailing as a necessary part of their overall distribution strategy.
Shops may be on residential streets, shopping streets with few or no houses, or in a shopping center or mall, but are mostly found in the central business district. Shopping streets may be for pedestrians only. Sometimes a shopping street has a partial or full roof to protect customers from precipitation. Retailers often provided boardwalks in front of their stores to protect customers from the mud. Online retailing, also known as e-commerce is the latest form of non-shop retailing (cf. mail order).
Shopping generally refers to the act of buying products. Sometimes this is done to obtain necessities such as food and clothing; sometimes it is done as a recreational activity. Recreational shopping often involves window shopping (just looking, not buying) and browsing and does not always result in a purchase.
Most retailers have employees learn facing, a hyperreal tool used to create the look of a perfectly-stocked store even when it is not.
Contents [hide]
1 Retail pricing
2 Retail Industry
3 Etymology
4 Retail types
5 See also
6 Notes
7 References
[edit] Retail pricing
The pricing technique used by most retailers is cost-plus pricing. This involves adding a markup amount (or percentage) to the retailers cost. Another common technique is suggested retail pricing. This simply involves charging the amount suggested by the manufacturer and usually printed on the product bize the manufacturer.
In Western countries, retail prices are often so-called psychological prices or odd prices: a little less than a round number, e.g. $6.95. In Chinese societies, prices are generally either a round number or sometimes a lucky number. This creates price points.
Often prices are fixed and displayed on signs or labels. Alternatively, there can be price discrimination for a variety of reasons, where the retailer charges higher prices to some customers and lower prices to others. For example, a customer may have to pay more if the seller determines that he or she is willing to. The retailer may conclude this due to the customer's wealth, carelessness, lack of knowledge, or eagerness to buy. Another example is the practice of discounting for youths or students. Price discrimination can lead to a bargaining situation often called haggling, in which the parties negotiate about the price. Economists see this as determining how the transaction's total surplus will be divided into consumer and producer surplus. Neither party has a clear advantage, because of the threat of no sale, in which case the surplus vanishes for both.
Retailers who are overstocked, or need to raise cash to renew stocks may resort to "Sales", where prices are "marked down", often by advertised percentages - "50% off" for example."Sales" are often held at fixed times of the year, for example January sales, or end-of-season sales, or Blue Cross Sale
[edit] Retail Industry
Retail Industry has brought in phenomenal changes in the whole process of production, distribution and consumption of Consumer Goods all over the world. In the present world most of the developed economies are using the Retail Industry as their vital growth instrument. At present, among all the industries of U.S.A the Retail Industry holds the second place in terms of Employment Generation. In fact, the strength of the Retail Industry lies in its ability to generate large volume of employment.
Not only U.S but also the other developed countries like U.K, Canada, France, Germany are experiencing tremendous growth in their Retail Sectors. This boom in the Global Retail Industry was in many ways accelerated by the Liberalization of Retail Sector.
Observing this global upward trend of Retail Industry, now the developing countries like India are also planning to tap the enormous potential of the retail sector. Wal-Mart,the world's largest Retailer has been invited to India. Other popular Brands like Pantaloons, Big Bazar, Archies are rapidly increasing their market share in the retail sector. According to a survey, within 5 years, the Indian Retail Industry is expected to generate 10 to 15 million jobs by direct and indirect effects. This huge employment generation can be possible because of the fact that being dependent on the the Retail Sector shares a lot of Forward and Backward Linkages.
Emergence of a strong Retail Sector can contribute immensely to the economic development of any country. With a dominant retail sector, the farmers and other suppliers can sell their produce directly to the major retail companies and can ensure stable profit. On the other hand, to ensure steady supply of goods, the Retail Companies can inject cash into the production system. This whole process can result into a more efficient production and distribution system for the economy as a whole.
[edit] Etymology
Retail comes from the French word retaillier which refers to "cutting off, clip and divide" in terms of tailoring (1365). It first was recorded as a noun with the meaning of a "sale in small quantities" in 1433 (French). Its literal meaning for retail was to "cut off, shred, paring". Like the French, the word retail in both Dutch and German (detailhandel and Einzelhandel respectively) also refer to sale of small quantities or items.[citation needed]
[edit] Retail types
According to Jim there are three major types of retailing. The first is the market, a physical location where buyers and sellers converge. Usually this is done in town squares, sidewalks or designated streets and may involve the construction of temporary structures (market stalls). The second form is shop or store trading. Some shops use counter-service, where goods are out of reach of buyers, and must be obtained from the seller. This type of retail is common for small expensive items (e.g. jewelry) and controlled items like medicine and liquor. Self-service, where goods may be handled and examined prior to purchase, has become more common since the Twentieth Century. A third form of retail is virtual retail, where products are ordered via mail, telephone or online without having been examined physically but instead in a catalog, on television or on a website. Sometimes this kind of retailing replicates existing retail types such as online shops or virtual marketplaces such as futurebazaar.com or Amazon.[2].
Buildings for retail have changed considerably over time. Market halls were constructed in the Middle Ages, which were essentially just covered marketplaces. The first shops in the modern sense used to deal with just one type of article, and usually adjoined the producer (baker, tailor, cobbler). In the nineteenth century, in France, arcades were invented, which were a street of several different shops, roofed over. counters, each dealing with a different kind of article was invented; it was called a department store. One of the novelties of the department store was the introduction of fixed prices, making haggling unnecessary, and browsing more enjoyable. This is commonly considered the birth of consumerism [3]. In cities, these were multi-story buildings which pioneered the escalator.
In the 1920s the first supermarket opened in the United States, heralding in a new era of retail: self-service. Around the same time the first shopping mall was constructed [4] which incorporated elements from both the arcade and the department store. A mall consists of several department stores linked by arcades (many of whose shops are owned by the same firm under different names). The design was perfected by the Austrian architecht Victor Gruen[5]. All the stores rent their space from the mall owner. By mid-century, most of these were being developed as single enclosed, climate-controlled, projects in suburban areas. The mall has had a considerable impact on the retail structure and urban development in the United States. [6]
In addition to the enclosed malls, there are also strip malls which are 'outside' malls (in Britain they are called retail parks. These are often comprised of one or more big box stores or superstores.
Non-traditional exterior of a SuperTarget, JacksonvilleLocal shops can be known as brick and mortar stores in the United States. Many shops are part of a chain: a number of similar shops with the same name selling the same products in different locations. The shops may be owned by one company, or there may be a franchising company that has franchising agreements with the shop owners (see also restaurant chain).
Some shops sell second-hand goods. Often the public can also sell goods to such shops, sometimes called 'pawn' shops. In other cases, especially in the case of a nonprofit shop, the public donates goods to the shop to be sold (see also thrift store). In give-away shops goods can be taken for free.
There are also 'consignment' shops, which is where a person can place an item in a store, and if it sells the person gives the shop owner a percentage of the sale price. The advantage of selling an item this way is that the established shop give the item exposure to more potential buyers.
The term retailer is also applied where a service provider services the needs of a large number of individuals, such as with telephone or electric power.
IS Retail was original develop to meet specific needs of Retail industry where standard SD/MM cannot.
- Significant functionality difference are:
- Store specific features are built into IS Retail where as it is not in
standard SD/MM.
- Mass processing of pricing (some of the retail features were
included as standard SAP as of 4.6)
- Assortment handling is not in standard SAP
There are other differences in inventory costing/valuation etc.
Retail valuation only available in SAP Retail.
What is known in the trade as the "retail inventory method" or the "retail method" involves valuating stocks at retail, often aggregated at merchandise category or departmental level.
Both the cost method and the retail method can be used in SAP Retail.
Actually IS-Retail is a combination of MM and SD plus other funtionalities speacially developed for the retail industry such as:
Promotions
Pricing
Assortments
Clasification
Merchandise category
Seasons
Is important to mention that all the funtionality of MM and SD is avialable in SAP IS-Retail with some diferences in some transactions:
Material master data (article in retail) has some diferences.
Vendor master data.
Site master data.
Reward if useful to u

Transfer single results from results recording to batch characteristic

Hi all,
I've a question. Is it possible to transfer multiple single results from results recording to a batch? It should only be qualitative results. The problem is as follows.
We have a SAP - LIMS interface (QM-IDI). In SAP we have an inspection plan with two MICs:
Customers OK
Customers Not Ok
Both MICs are linked to a catalog with customer + specification number. For example:
0001 - Customer A v. 2015.01
0002 - Customer B v. 2014.08
0003 - Customer C v. 2015.02
0004 - Customer D v. 2015.01
LIMS determines which customer specifications passed and which failed. We'd like to get the following batch from LIMS:
Customers OK
0002 - Customer B v. 2014.08
0003 - Customer C v. 2015.02
0004 - Customer D v. 2015.01
Customers Not Ok:0001 - Customer A v. 2015.01
This is what we would like to see in the batch as well. Batch selection should be performed based on this information. Ik looked into multiple specifications, but I don't think this can help.
Thanks for your help.
regards,
Maarten

This is basically standard SAP functionality under Multiple specifications functionality. With that process you can specify what country a material is Ok for or not ok for.
Multiple Specifications in Inspection Planning - Quality Management (QM) - SAP Library
Otherwise, without this, there is no standard way to implement what you want.
However, since you are using an interface between your LIMS and SAP, you can have your system, based on values in the file transfered, take certain values from the file and directly update the batch characteristic values, (MSC2n) and record the countries it's ok for. It would simply be a mult-value characteristic. But the data for it comes from the transfer file, not QM. There would basically be nothing visible about this in the inspection lot.
Craig

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
<B>DESCRIPTIONS</B>:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
<B>INSTRUCTIONS</B>:
1. Run the VI.
2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
<B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
<B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Using JMX to get status information about NetWeaver cluster

Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
Radu

As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt.

Way to consolidate information about vendors

Hello,
I have two or more vendor master data , that have different vendor no (LIFNR) but they relate to same vendor.
Example: Vendor A Vendor B , different ID but relate to the same vendor.
It is happened usually in cases that the VAT.Reg no. is changed and than I need to open another record in the vendor master data for the same vendor.
I need to find way when using control reports (LIS, BW, ME2L,ME2M..) to vendor B (LIFNR) the system will show also information about vendor A.
I need, standard way to consolidate information for two different vendor master data that relate to the same vendor.
Best Regards
Hadidit

you create new vendor and continue your business with the new vendor, but want the old vendor as well in the reports.
I dont think that there is anything available in standard SAP that you can automatically get both vendors into a e.g. ME2L report when you enter one vendor number in the selection.
I cannot imagine thatyou can run MR2M reports based on partner functions .
in vendor master control view is field called Group key that can be used to link old and new vendor number
f1 help says:
If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are possible.
But I have not seen this field in selection of ME2L.

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Information about fwdservice dot com?

Note that urls in this post are deliberately obfuscated.
Earlier today I tried to access www <dot> casponline <dot> org which is supposed to be the site of the California Association of School Psychologists. When I had trouble viewing content, I enabled javascript for two sites the page seemed to need: cdn <dot> rooktemplate <dot> com and fwdservice <dot> com. This didn't seem to help much. I went from blank content to perpetual loading.
As far as I can tell fwdservice is associated with Windows malware which redirects attempts to access various webpages to fwdservice's site. I am guessing this simply fails on Linux but does anybody know anything more about this? The information about Windows is what I gleaned from a web search but I am not sure how reliable it is or if there is more to this. Because I was on campus at the time, the university's rule set typically blocks malware sites. (E.g. a link which would take me somewhere at home will be blocked on campus.) Obviously that's only a certain proportion of what's out there, however, so it doesn't show the information isn't reliable.
I am pretty sure that casponline should be a legitimate site or used to be one as I've found links to it from enough kosher-looking pages for it to seem unlikely they are all fake. (And they are always pages about psychological research etc.)

OK. If I ping casponline.org, I get the same ip (68.171.213.42). If I load that ip in my browser and allow it to load the script, it all looks fine. But if I load www.casponline.org, I get nothing and the source code for the page is completely different.
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<script type="text/javascript">var NREUMQ=NREUMQ||[];NREUMQ.push(["mark","firstbyte",new Date().getTime()]);</script><title>Loading...</title>
<script src="http://cdn.rooktemplate.com/rmgdsc/newProcess.js?v3.1" type="text/javascript" language="javascript"></script>
</head>
<body>
<div id="rmgblock"></div>
<script type="text/javascript" id="_rMG_fir">
var _pR="gkwrf="+"",_folio="775974688",_bkt="8171";
var _adPage="<scr"+"ipt id=\"_rMG_dyn\" type=\"text/javascript\" language=\"JavaScript\""+" src=\"http://fwdservice.com/main.php?dmn="+"casponline.org"+"&folio="+_folio+"&"+_pR+"&bkt="+_bkt+"\">"+ "</scr" + "ipt>";
document.write(_adPage);
</script>
<script type="text/javascript">if(!NREUMQ.f){NREUMQ.f=function(){NREUMQ.push(["load",new Date().getTime()]);var e=document.createElement("script");e.type="text/javascript";e.src=(("http:"===document.location.protocol)?"http:":"https:")+"//"+"js-agent.newrelic.com/nr-100.js";document.body.appendChild(e);if(NREUMQ.a)NREUMQ.a();};NREUMQ.a=window.onload;window.onload=NREUMQ.f;};NREUMQ.push(["nrfj","beacon-2.newrelic.com","6bc175e1c8","2059687","blxaMRFVWEFSUENfWVcWbRcKG19cV1ZPGEZRSQ==",0,118,new Date().getTime(),"","","","",""]);</script></body></html>
I get the same result at home as on campus (but I'm on the same machine). So how would my DNS get poisoned and can I unpoison it?
Though if DNS was poisoned, wouldn't it affect ping as well?
EDIT: I just sshed into a machine at work (which I am about to lose, but still for today...) and found that ping www.casponline.com uses an ip address of 107.20.206.69. So could that have been the address I got given earlier when using my laptop on campus? Now I'm home so I get the right result from ping. But why would firefox still use the same ip as earlier? I tried removing the cache but it didn't make any difference. Is there something further I need to do? (And is this likely to indicate a more serious problem?)
The machine I sshed to is running Fedora 19 so it is definitely not likely to be an Arch-specific screw-up on my part, if you see what I mean.
Last edited by cfr (2013-09-05 23:32:14)

Information about Services

Hi,
we are using SRM 5.0
I need information about services in SRM
so, we have two types of product - material and service.
we have already tested shopping, bidding and other functionality with material. It is clear for me.
now it is time for service testing, and i have some questions:
1. When employee goes shopping - he chooses "Internal Goods/Services", then he click "Start". And a very long list of materials and services is displayed. Services and materials are mixed in alphabetical order.
Are there some ways for dividing this big list in two parts - materials and services? not to sort all of them by descending/ascending order, but to separate them, because to look for something in mixed list is impossible.
Can we make Product Type field to be mandatory for entering before displaying the results? I mean having a binocular near this field, and clicking on it will give us a chance to choose Services or Materials. It will make more simple the whole process.
2. After adding to a SC, are there any differences between processes with Materials and Services? Or no differences, and the same biddings, auctions and others..
3. What is the "Requests" menu in Go Shopping? for which purposes i can use it?
4. Managing Business Partners and it's employee, i have a check-box "service agent". Where this status of partner is use? i can't see in the shopping cart any fields for choosing a service agent
Will be very greatful and award points for helpful answers.
thnx

Hi,
1.Getting a F4 help for the field Product type would be standard modifictaion.However you could try mdofiying the O/P list which is displayed(e.g. sort it based on the product type).
Have a look at this thread for more pointers:
Re: Change in product display
3.Related thread:
"Request" menu option is for... ? :-(
BR,
Disha.

Storing easy to access information about current user

Hi everybody!
Does someone know if I could store somewhere an information about the current user and that a could retrieve anytime in a similar way I can retrieve the username of the current user when I do 'select user from dual' ? I would like each new session opened to pass a different information even if it is the same user.
Would the table user_users be a good place to store this information ? Does it store a new record for each session ? If yes, where is it and how could I modify its structure (new column) or its data ? Or maybe I should create a similar table that I would update myself with each new session.
Thanks,
Denis.

I dont remember that Oracle keeps the information persistent anywhere of the session after the session is over. If your session is on than the info is in the V$session.
The way around could be that you enable some logon trigger and capture thelogin credentials of all teh users in some table of yours and check it later on.
I would like each new session opened to pass a different information even if it is the same user.
I didnt get this part. Every time the info willbe by default different right? It will be a new session id, serial number all the time.
Would the table user_users be a good place to store this information ? Does it store a new record for each session ? If yes, where is it and how could I modify its structure (new column) or its data ? Or maybe I should create a similar table that I would update myself with each new session.
Well for sure the user_users contains the info of the current users but in NO WAY you shoudl think about tempering this view by yourself as its a part of oracle's own data dictionary. Changing any part of that will leave your database in the unsupported state.
The other option to create a table similar like this of your own will be a good idea.But before that I guess you should reply to Justin's questions what exactly you want to track?
Aman....

Information about pending results recording in CO11N

Similar Messages

Maybe you are looking for