Identify the error
Hi,
I've got some problem in adconfig log when starting VIS DB. How to identify it and resolve it?
http://dl.dropbox.com/u/40211031/adconfig.log
HuaMin Chen wrote:
Thanks. When I tried to restart the machine and also R12, I've got this. Where is server error log?
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.The path (directory name) is mentioned in the doc referenced in my previous reply.
Thanks,
Hussein
Similar Messages
-
Can any one Identify the error
SELECT EXTRACTVALUE(:NEW.REQUEST, '/Message/body'),
EXTRACTVALUE(:NEW.REQUEST, '/Message/from')
INTO V_REQUEST, V_MOB
FROM DUAL;
SELECT ACC_NUM, RGSTR_FLAG, LL_NUM
INTO V_ACC_NUM, V_RGSTR_FLAG, V_LL_NUM
FROM CUST_INFO
WHERE CUST_MOBILE_NUM LIKE V_MOB;
ERROR
ERROR at line 4:
ORA-01403: no data found
it works fine when I do
WHERE CUST_MOBILE_NUM LIKE 505282455;
Please can someone identify the error.
thanx.REQUEST FIELD
<message>
<to>123</to>
<from>789</from>
<body>unbill</body>
<messagenumber>01</messagenumber>
</message> -
Can any one identify the XML error....
SELECT EXTRACTVALUE(:NEW.REQUEST, '/Message/body'),
EXTRACTVALUE(:NEW.REQUEST, '/Message/from')
INTO V_REQUEST, V_MOB
FROM DUAL;
SELECT ACC_NUM, RGSTR_FLAG, LL_NUM
INTO V_ACC_NUM, V_RGSTR_FLAG, V_LL_NUM
FROM CUST_INFO
WHERE CUST_MOBILE_NUM LIKE V_MOB;
ERROR
ERROR at line 4:
ORA-01403: no data found
it works fine when I do
WHERE CUST_MOBILE_NUM LIKE 505282455;
Please can someone identify the error.
thanx.
REQUEST FIELD
<message>
<to>123</to>
<from>789</from>
<body>unbill</body>
<messagenumber>01</messagenumber>
</message>
THANX.CORRECTION
<MESSAGE>
<TO>907</TO>
<FROM>505282455</FROM>
<BODY>UNBIL</BODY>
</MESSAGE> -
Apple is requiring the establishment of 3 security question (increase online security), but coninuously gives an error without identifying the error. I am not allow to proceed or bypass and cannot use any apple store features.
Exactly when does this error occur? What is the exact wording?
-
HT201210 what is the error 4014
what is the error 4014
Did you receive this error after installing the latest IOS? I had complete failure of my IPAD 2 about 1 week after installing IOS 7.0.2 and started receiving this error from iTunes when I would try to restore. I have called in for service and after about an hour of trying new processes we were unable to identify the problem so it was suggested to take it into an Apple store. After taking it to an apple store this past weekend the GENIUS rep ran the restore on my ipad and atleast received some response from it, but the restore failed resulting in the same error. The rep then claimed it was a hardware failure and I would need to replace the IPAD at discounted fee. Not feeling as if it is a hardware issue I am still dealing with the issue and working with a Sr. Advisor now and hopefully we can resolve the issue. May have a response for you tomorrow. I just find it funny how the s/w can identify the error but no one really knows what the error is.
-
How to identify the constraint error
Hi friends, i got constraint error, like this
{4,209,669 123112 09:27:44:Code :ORA-02290: check constraint (OPS$hgn.CS_MQ_BADNORETAIL_CT7) violated at nopMASTERat sub exec block in pop_je2acct_othr}
How can i identify, the from which procedure or package its failing... kindly help me out ..
thanks in adavance .This surely is not the default Oracle message. it would look like
DECLARE
n NUMBER;
BEGIN
n := 1/0;
END;
DECLARE
ERROR at line 4:
ORA-01476: divisor is equal to zero
ORA-06512: at line 4or
DECLARE
n NUMBER;
BEGIN
n := 1/0;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line(
dbms_utility.format_error_stack()||CHR(10)||
dbms_utility.format_error_backtrace()
RAISE;
END;
ORA-01476: divisor is equal to zero
ORA-06512: at line 4So you have to look into your packages and find out how your log messages are built up.
A hint might be nhpMASTERat and pop_je2acct_othr. You can search your code where these names occur:
SELECT owner
,name
,type
,line
,text
FROM sys.all_source
WHERE owner = user
AND ( INSTR(UPPER(text),UPPER('nhpMASTERat')) > 0
OR INSTR(UPPER(text),UPPER('pop_je2acct_othr')) > 0
ORDER BY owner
,name
,type
,lineMarcus -
How can I identify the cause of a Script Error
We have a client who has been using Contribute for a few years and who has reported that they are constantly getting a Script Error message when using Contribute to edit pages.
This message has only started to show in the last week or so despite there not having been any revisions to the site template (that I'm aware of).
The message seems to be appearing when visiting most if not all pages on the site.
I've looked at the scripts used in the site but can't identify anything with reference to MM_swapimage in Line: 1 Char: 1
Can anyone give suggestions for solving this issue or at least to stop the error message from conatantly appearing?
Screen shot of the message attached for reference.You can try installing IE 9. Since Contribute uses the latest version of IE installed in the machine as its embedded browser, this issue might be solved.
-
Help Identify the root cause of this error
Hi,
We have a dynamic region in a jsf page. Its value (bounded task flow) depends on the menu item being selected. Each bounded task flow has some task flows and fragments within. In production, users get this below error rarely. This error is not reproducable, but comes rarely like 1 out of 200 times. The error from the log:
<May 2, 2013 4:47:07 PM CEST> <Warning> <com.view.common.AbstractBaseMB> <BEA-000000> <findIteratorBinding gives null, itrName = SecuritySearchVO1Iterator>
< May 2, 2013 4:47:35 PM CEST> <Warning> <com.view.common.AbstractBaseMB> <BEA-000000> <findIteratorBinding gives null, itrName = SecuritySearchVO1Iterator>
< May 2, 2013 4:49:10 PM CEST> <Warning> <com.view.common.AbstractBaseMB> <BEA-000000> <findIteratorBinding gives null, itrName = SecuritySearchVO1Iterator>
< May 2, 2013 4:49:26 PM CEST> <Error> <oracle.adf.share.el.VariableResolverELContext> <BEA-000000> <The variable resolver, oracle.adf.model.binding.DCVariableResolverImpl, was used to evaluate expression, data. All variable resolvers have been deprecated. Please consult the documentation for the variable resolver and modify the expression to not depend upon the variable resolver.>
< May 2, 2013 4:49:26 PM CEST> <Error> <oracle.adf.share.el.VariableResolverELContext> <BEA-000000> <The variable resolver, oracle.adf.model.binding.DCVariableResolverImpl, was used to evaluate expression, data. All variable resolvers have been deprecated. Please consult the documentation for the variable resolver and modify the expression to not depend upon the variable resolver.>
< May 2, 2013 4:49:26 PM CEST> <Error> <com.view.ErrorHandlerMB> <BEA-000000> <error in view port
javax.el.PropertyNotFoundException: Target Unreachable, identifier 'bindings' resolved to null
at com.sun.el.parser.AstValue.getTarget(Unknown Source)
at com.sun.el.parser.AstValue.getMethodInfo(Unknown Source)
at com.sun.el.MethodExpressionImpl.getMethodInfo(Unknown Source)
at oracle.adf.controller.internal.util.ELInterfaceImpl.getReturnType(ELInterfaceImpl.java:214)
at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:136)
at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:1035)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:926)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:824)
at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:554)
at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:158)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)
at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:112)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:106)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1129)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:353)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:204)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(AccessController.java:284)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:100)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
javax.el.PropertyNotFoundException: Target Unreachable, identifier 'bindings' resolved to null
at com.sun.el.parser.AstValue.getTarget(Unknown Source)
at com.sun.el.parser.AstValue.getMethodInfo(Unknown Source)
at com.sun.el.MethodExpressionImpl.getMethodInfo(Unknown Source)
at oracle.adf.controller.internal.util.ELInterfaceImpl.getReturnType(ELInterfaceImpl.java:214)
at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:136)
at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:1035)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:926)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:824)
at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:554)
at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:158)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)
at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:112)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:106)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1129)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:353)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:204)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(AccessController.java:284)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:100)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
< May 2, 2013 4:49:26 PM CEST> <Error> <com.view.ErrorHandlerMB> <BEA-000000> <6. [ErrorHandlerMB] Error message Message = Target Unreachable, identifier 'bindings' resolved to null Exception class = javax.el.PropertyNotFoundException: Target Unreachable, identifier 'bindings' resolved to null>
< May 2, 2013 4:49:26 PM CEST> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.view.facelets.TagAttributeException: /home.jsf @5,48 locale="#{sessionScope.userBean.userLocale}" Attribute did not evaluate to a String or Locale: null
at com.sun.faces.facelets.tag.jsf.ComponentSupport.getLocale(ComponentSupport.java:278)
at com.sun.faces.facelets.tag.jsf.core.ViewHandler.apply(ViewHandler.java:128)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:82)
at com.sun.faces.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:152)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.buildView(FaceletViewHandlingStrategy.java:744)
at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.buildView(ViewDeclarationLanguageFactoryImpl.java:341)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:982)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(AccessController.java:284)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:100)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
< May 2, 2013 4:49:26 PM CEST> <Error> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <BEA-000000> <ADF_FACES-30179:For more information, please see the server's error log for an entry beginning with: The UIViewRoot is null. Fatal exception during PhaseId: RESTORE_VIEW 1.
oracle.adf.controller.ControllerException: ADFC-00001: An exception is encountered.
at oracle.adfinternal.controller.state.AdfcContext.getSessionBasedScopes(AdfcContext.java:368)
at oracle.adfinternal.controller.state.PageFlowScopeStack.peek(PageFlowScopeStack.java:65)
at oracle.adfinternal.controller.state.PageFlowStackEntry.getPageFlowScope(PageFlowStackEntry.java:268)
at oracle.adfinternal.controller.state.ViewPortContextImpl.getCurrentStateInstance(ViewPortContextImpl.java:604)
at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:215)
at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:868)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:359)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:151)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:550)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
I tried everything, but not able to find the root cause of the error. Kindly help.
Edited by: Kartick on May 16, 2013 8:06 PMHi,
your code uses the following bean
#{sessionScope.userBean.userLocale}
to set a locale. This returns NULL and as such JSF does seem to have a problem to query the Home.jsf page, not creating the ADF binding context because of a missing UI View Root. So the question is : why is the userLocale "null" randomly. I would think that once you figure this out, you get a solution. A solution would be to change the getUserLocale() method in this bean to return a default user locale if the usre specific locale cannot be determined or is set to null.
Frank -
I cannot import photos to my iphoto from any of my devices. The error message reads - iphoto cannot import your photos because there was a problem downloading an image. I have deleted the last images- this did not help. any suggestions?
Details please
What version of iPhoto? Of the OS? what devices are you haveing problems with? can you download teh photos to a desktop folder using image capture (in your applications folder) and import from there - or open with priview from there?
LN -
How to identify what are all the errors appears in process chain,
Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
poojaHi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to 9999.
5. Repeat the ip.
6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
1. In order to handle this error you should be known to IP, info source and source system.
2. Goto RSA1, find the data source in the source sys tab.
3. Right click on the data source and replicate it.
4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
3. Goto update tab and select Initialize delta process try going for with data transfer.
4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
1. Goto info package via header or via RSA1.
2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
1. Goto maintain variant.
2. Check for the QM status of the requests in the target they should be green.
3. Then click the ODS activation tab.
4. In the screen which appears put the requests for which ODS activation failed.
5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
6. If requests are red then delete them from target.
7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
1. Click on the variant in which the error occurred.
2. Goto chain tab and copy the variant and instance.
3. Run the nestle provided program YBW05.
4. Put in info in there and put the status as g green.
5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
1. We can see the locked entries and in the transaction SM12.
2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
4. In the box appears select update in the background.
5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
1. Reload the Master Data manually again from Info-package at RSA1.
2. Release the Idoc.
3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
5. If status is Transaction executing then it means its fine wait.
6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
Reason: Sometimes we face that a load has failed due to job Termination at Source System.
This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1. Make the request red.
2. Delete the request from the data target.
3. Reschedule the ip.
4. If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu -
I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
When I open up Mozilla i get this error message--TypeError: Components.classes[cid] is undefined
also when i am working on my real estate web site and pull up a name i get the same messag. At the top it always says-- Java Script ApplicationThat error is caused by an incompatible/malfunctioning add-on. To identify the culprit follow the procedure in the [[troubleshooting extensions and themes]] article. One add-on that has caused this error for some is AVG safe search.
-
Please help me to get this done!....Thanks in Advance
This is current script I use to update AD record but its taking user id to pick the user in AD, which is some time give error not update properly..
# UpdateUsers.ps1
# PowerShell program to update Active Directory users from the information in a
# Microsoft Excel spreadsheet. Only single-valued string attributes supported.
# Author: Richard Mueller
# PowerShell Version 1.0
# September 12, 2011
Trap
If ("$_".StartsWith("Cannot load COM type Excel.Application"))
"Excel application not found, program aborted"
Add-Content -Path $LogFile -Value "## Excel application not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If (("$_".StartsWith("Exception has been thrown")) -and ($Step -eq "4"))
"Excel spreadsheet not found, program aborted"
Add-Content -Path $LogFile -Value "## Excel spreadsheet not found: $ExcelPath"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The server is not operational"))
"Domain Controller not found, program aborted"
Add-Content -Path $LogFile -Value "## Domain Controller not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The directory service is unavailable"))
"Active Directory not found, program aborted"
Add-Content -Path $LogFile -Value "## Active Directory not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
If ("$_".StartsWith("The specified domain"))
"Domain not found, program aborted"
Add-Content -Path $LogFile -Value "## Domain not found"
Add-Content -Path $LogFile -Value " $_"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
Break
"Unexpected error: $_"
Add-Content -Path $LogFile -Value "## Unexpected error: $_"
Add-Content -Path $LogFile -Value " Step: $Step"
Break
Function CleanUp
Trap
"Error during cleanup: $_"
Add-Content -Path $LogFile -Value "## Error during cleanup: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Function to release Excel objects from memory.
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Columns)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Rows)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Range)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Sheet)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Worksheets)} While ($x -gt -1)
$Workbook.Close($False)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Workbook)} While ($x -gt -1)
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Workbooks)} While ($x -gt -1)
$Excel.Quit()
Do {$x = [System.Runtime.InteropServices.Marshal]::ReleaseComObject($Excel)} While ($x -gt -1)
# Specify paths to spreadsheet and log file.
$Script:Errors = 0
$Step = "1"
$ExcelPath = "c:\scripts\UpdateUsers.xls"
$LogFile = "c:\scripts\UpdateUsers.log"
Write-Host "Please Standby..."
# Add to the log file.
$Step = "2"
Add-Content -Path $LogFile -Value "------------------------------------------------" -ErrorAction Stop
Add-Content -Path $LogFile -Value "UpdateUsers.ps1 Version 1.0 (September 12, 2011)"
Add-Content -Path $LogFile -Value $("Started: " + (Get-Date).ToString())
Add-Content -Path $LogFile -Value "Spreadsheet: $ExcelPath"
Add-Content -Path $LogFile -Value "Log file: $LogFile"
$Step = "3"
# Open specified Excel spreadsheet.
$Excel = New-Object -ComObject "Excel.Application"
$Workbooks = $Excel.Workbooks
$Step = "4"
$Workbook = $Workbooks.Open($ExcelPath)
$Worksheets = $Workbook.Worksheets
$Sheet = $Worksheets.Item(1)
$Range = $Sheet.UsedRange
$Rows = $Range.Rows
$Columns = $Range.Columns
$Step = "5"
# Hash table of attribute syntaxes.
# The LDAP display names will be read from the spreadsheet.
# The corresponding syntaxes will be read from the Schema container.
$Attributes = @{}
# Array of spreadsheet column headings.
$Cols = @()
$Step = "6"
# Read attribute LDAP Display Names from the first row of the spreadsheet.
$ID = 0
For ($k = 1; $k -le $Columns.Count; $k = $k + 1)
# Retrieve column heading, the lDAPDisplayName of an attribute.
$Value = $Sheet.Cells.Item(1, $k).Text
# Keep track of all column headings.
$Cols += $Value
# Skip duplicates in hash table.
If ($Attributes.ContainsKey($Value) -eq $False)
# Default is "NotFound", until found in the AD Schema.
$Attributes.Add($Value, "NotFound")
# Keep track of which column uniquely identifies users.
If ($Value.ToLower() -eq "distinguishedname") {$ID = $k}
If (($Value.ToLower() -eq "samaccountname") -and ($ID -eq 0)) {$ID = $k}
# This script cannot be used to rename users.
If ($value.ToLower() -eq "cn")
Add-Content -Path $LogFile -Value "## This script cannot be used to rename users"
Add-Content -Path $LogFile -Value " Do not specify the cn attribute in the spreadsheet"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted: cn attribute found in spreadsheet" `
+ "`nSee log file: $LogFile"
$Step = "7"
If ($ID -eq 0)
Add-Content -Path $LogFile -Value "## No column found to identify users"
Add-Content -Path $LogFile -Value " One column must be distinguishedName or sAMAccountName"
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted: No column found in spreadsheet to identify users" `
+ "`nSee log file: $LogFile"
# Create filter to query for attributes in the schema.
$Attrs = $Attributes.Keys
$Filter = "(&(objectCategory=AttributeSchema)(|"
ForEach ($Attr In $Attrs)
$Filter = $Filter + "(lDAPDisplayName=$Attr)"
$Filter = $Filter + "))"
$Step = "8"
$RootDSE = [System.DirectoryServices.DirectoryEntry]([ADSI]"LDAP://RootDSE")
$Domain = $RootDSE.Get("defaultNamingContext")
$Schema = $RootDSE.Get("schemaNamingContext")
$Step = "9"
# Use the NameTranslate object.
$objTrans = New-Object -comObject "NameTranslate"
$objNT = $objTrans.GetType()
# Initialize NameTranslate by locating the Global Catalog.
$objNT.InvokeMember("Init", "InvokeMethod", $Null, $objTrans, (3, $Null))
$Step = "10"
# Retrieve NetBIOS name of the current domain.
$objNT.InvokeMember("Set", "InvokeMethod", $Null, $objTrans, (1, "$Domain"))
$NetBIOSDomain = $objNT.InvokeMember("Get", "InvokeMethod", $Null, $objTrans, 3)
Add-Content -Path $LogFile -Value "NetBIOS name of domain: $NetBIOSDomain"
$Step = "11"
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.SearchRoot = [ADSI]"LDAP://$Schema"
$Searcher.PageSize = 200
$Searcher.SearchScope = "subtree"
$Searcher.PropertiesToLoad.Add("lDAPDisplayName") > $Null
$Searcher.PropertiesToLoad.Add("attributeSyntax") > $Null
$Searcher.PropertiesToLoad.Add("isSingleValued") > $Null
$Searcher.PropertiesToLoad.Add("systemFlags") > $Null
# Filter on specified attributes.
$Searcher.Filter = $Filter
$Step = "12"
# Query Active Directory.
$Results = $Searcher.FindAll()
# Enumerate recordset.
ForEach ($Result In $Results)
# Retrieve properties of attributes.
$Name = $Result.Properties.Item("lDAPDisplayName")[0]
$SysFlags = $Result.Properties.Item("systemFlags")[0]
$SyntaxNum = $Result.Properties.Item("attributeSyntax")[0]
$SingleValued = $Result.Properties.Item("isSingleValued")[0]
# Only single-valued string attributes supported by this version of the program.
Switch ($SyntaxNum)
"2.5.5.12" {$Syntax = "String"}
Default {$Syntax = "NotSupported"}
If ($Name.ToLower() -eq "distinguishedname") {$Syntax = "DN"}
If (($SysFlags -band 4) -ne 0)
$Attributes[$Name] = "Constructed"
Else
If ($SingleValued -eq $True)
$Attributes[$Name] = $Syntax
Else
$Attributes[$Name] = "NotSupported"
$Step = "13"
# Check if any attributes not found or have unsupported syntax.
$Found = $True
ForEach ($Attr In $Attrs)
$Syntax = $Attributes[$Attr]
If ($Syntax -eq "NotFound")
Add-Content -Path $LogFile -Value "## Attribute $Attr not found in schema"
"Attribute $Attr not found in schema"
$Found = $False
If ($Syntax -eq "NotSupported")
Add-Content -Path $LogFile -Value "## Attribute $Attr has a syntax that is not supported"
"Attribute $Attr has a syntax that is not supported"
$Found = $False
If ($Syntax -eq "Constructed")
Add-Content -Path $LogFile -Value "## Attribute $Attr is operational, so is not supported"
"Attribute $Attr is operational, so is not supported"
$Found = $False
$Step = "14"
If ($Found -eq $False)
Add-Content -Path $LogFile -Value $("Program aborted: " + (Get-Date).ToString())
CleanUp
Return "Program aborted" `
+ "`nSee log file: $LogFile"
# Read remaining rows of the spreadsheet, until the first blank value is found
# in the column that identifies users.
$Step = "15"
$Script:Updated = 0
$Script:Unchanged = 0
$j = 2
Do {
# Retieve ID value for the user first.
$Value = $Sheet.Cells.Item($J, $ID).Text
$Found = $False
$Step = "16"
If ($Cols[$ID - 1] -eq "distinguishedname")
# Any forward slash characters must be escaped.
$DN = $Value.Replace("/", "\/")
# Bind to the user object.
# If user not found, $User.Name will be $Null.
$User = [ADSI]"LDAP://$DN"
If ($User.Name -ne $Null)
$Found = $True
$Step = "17"
If ($Cols[$ID - 1] -eq "samaccountname")
Trap
Write-Host ""
"Error translating name: $_"
Add-Content -Path $LogFile -Value "## Error translating name $Value"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Convert sAMAccountName to distinguishedName.
$DN = ""
$Step = "18"
$objNT.InvokeMember("Set", "InvokeMethod", $Null, $objTrans, (3, "$NetBIOSDomain$Value"))
$DN = $objNT.InvokeMember("Get", "InvokeMethod", $Null, $objTrans, 1)
$Step = "19"
If ($DN -ne "")
$Step = "20"
# Any forward slash characters must be escaped.
$DN = $DN.Replace("/", "\/")
# Bind to the user object.
$User = [ADSI]"LDAP://$DN"
$Found = $True
If ($Found -eq $True)
$Step = "21"
# Read remaining values for this user.
$Changed = $False
For ($k = 1; $k -le $Columns.Count; $k = $k + 1)
# Skip the identifying column.
If ($k -ne $ID)
$Step = "22"
# Retrieve attribute name for this column from array.
$AttrName = $Cols[$k - 1]
# Retrieve attribute syntax from hash table.
$Syntax = $Attributes[$AttrName]
$Step = "23"
# Retrieve attribute value for this user.
$Value = $Sheet.Cells.Item($j, $k).Text
# Skip blank values.
If ($Value -ne "")
If ($Syntax -eq "String")
Trap
If ("$_".StartsWith("The directory property cannot be found"))
Continue
Else
Write-Host ""
"Error retrieving value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error retrieving $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
$Step = "24"
# Single-valued string attribute.
# Retrieve existing value.
$OldValue = ""
$OldValue = $User.Get($AttrName)
# Check if existing value to be deleted.
If ($Value.ToLower() -eq ".delete")
If ($OldValue -ne "")
If ($AttrName.ToLower -eq "samaccountname")
Add-Content -Path $LogFile -Value `
"## Mandatory attribute sAMAccountName cannot be cleared for user: $DN"
$Script:Errors = $Script:Errors + 1
Else
Trap
Write-Host ""
"Error deleting value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error deleting $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
$Step = "25"
# Make the attribute value "not set".
$User.PutEx(1, $AttrName, 0)
$Changed = $True
Else
$Step = "26"
# Check if new value from spreadsheet different.
If ($Value -ne $OldValue)
Trap
Write-Host ""
"Error assigning value from Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error assigning $AttrName for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
Continue
# Assign the new value to the attribute.
$User.Put($AttrName, $Value)
$Changed = $True
Else
# Unexpected error.
Add-Content -Path $LogFile -Value `
"## Unexpected syntax: $Syntax for attribute $AttrName for user $DN"
$Script:Errors = $Script:Errors + 1
If ($Changed -eq $True)
Trap
Write-Host ""
"Error saving to Active Directory: $_"
Add-Content -Path $LogFile -Value "## Error saving to AD for user $DN"
Add-Content -Path $LogFile -Value " Description: $_"
$Script:Errors = $Script:Errors + 1
$Script:Updated = $Script:Updated - 1
Continue
$User.SetInfo()
Add-Content -Path $LogFile -Value "Update user: $DN"
Write-Host "." -NoNewLine
$Script:Updated = $Script:Updated + 1
Else
Add-Content -Path $LogFile -Value "User unchanged: $DN"
Write-Host "." -NoNewLine
$Script:Unchanged = $Script:Unchanged + 1
Else
Add-Content -Path $LogFile -Value "## User not found: $Value"
Write-Host "." -NoNewLine
$Script:Errors = $Script:Errors + 1
$j = $J + 1
} Until ($Sheet.Cells.Item($j, $ID).Text -eq "")
$Step = "27"
CleanUp
Add-Content -Path $LogFile -Value $("Finished: " + (Get-Date).ToString())
Add-Content -Path $LogFile -Value "Number of users updated: $Script:Updated"
Add-Content -Path $LogFile -Value "Number of users unchanged: $Script:Unchanged"
Add-Content -Path $LogFile -Value "Number of errors: $Script:Errors"
Write-Host ""
"Done"
"Number of errors: $Script:Errors"
"See log file: $LogFile"Actually scripts run fine with excel file, currently we are using user-id to pick to update AD. Now we want to update AD use employee id. You can say to identify the record in AD through employee ID instead of user-id.
I do not think you will get anyone here to fix that for you. You need to find someone who knows PowerShell to help you or learn PowerShell your self.
I would fix it for you but not for free. It is too oddly designed and has too many dependencies. Any small change is likely to break it.
¯\_(ツ)_/¯ -
Unable to identify the exchange protocol of the message (sync AS2 MDN)
Hi,
We got the following error:
Description: Unable to identify the exchange protocol of the message
StackTrace:
Error -: AIP-50080: Exchange protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1367)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2370)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1813)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1152)
at oracle.tip.adapter.b2b.xmlgwIntg.XMLGWIntegration.raiseOutboundMessage(XMLGWIntegration.java:168)
at oracle.tip.adapter.b2b.xmlgwIntg.Outbound.onMessage(Outbound.java:297)
at oracle.jms.AQjmsListenerWorker.dispatchOneMsg(AQjmsListenerWorker.java:316)
at oracle.jms.AQjmsListenerWorker.run(AQjmsListenerWorker.java:129)
at java.lang.Thread.run(Thread.java:534)
Here is the Wire message (sync MDN)
=======================
Message-ID=<23033756.391232032071968.JavaMail.SYSTEM@INUBITTEST>
Subject=Your ORDERS AS2
[email protected]
Content-Length=1347
MIME-Version=1.0
Server=Apache
Date=Thu, 15 Jan 2009 15:07:52 GMT
Content-Type=multipart/mixed; boundary="----=_Part_53998_23619909.1232032071968"
[email protected]
------=_Part_53998_23619909.1232032071968
Content-Type: text/plain; charset=UTF-8; name=test.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=test.txt
Message-ID: <17080722.371232032071906.JavaMail.SYSTEM@INUBITTEST>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=disposition-notification;
boundary="----=_Part_53997_14786767.1232032071906"
AS2-Version: 1.1
AS2-From: test_AS2
AS2-To: as2me
------=_Part_53997_14786767.1232032071906
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
MDN for Message ID: <33156:4:0:137@as2me>
From: as2me
To: test_AS2
Received on: Thu, 15 Jan 2009 16:07:51 +0100
Status: processed
Comment: This is not a guarantee that the message has
been completely processed or unterstood.
------=_Part_53997_14786767.1232032071906
Content-Type: message/disposition-notification
Content-Transfer-Encoding: 7bit
Reporting-UA: inubit Integration Server
Original-Recipient: rfc822; test_AS2
Final-Recipient: rfc822; test_AS2
Original-Message-ID: <33156:4:0:137@as2me>
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: 5kFOLMXOUurpm6DUTA8IMRj5gcs=, sha1
------=_Part_53997_14786767.1232032071906--
------=_Part_53998_23619909.1232032071968--
============================
The communication with our TP is going well, we are able to send, receive messages over AS2 and send back MDN, but we are not able
to receive their MDN.
Edit:
It seems that after the latest MLR patch, the error changed to [IPT_HttpSendError] HTTP encounters send error :. Premature EOF encounter but the roots seem to lead to the problem with MDN as B2B is sending the message a couple of times now and gives the mentioned EOF error.
Please advise,
Thank you
Edited by: Kamil Zadora on Jan 30, 2009 3:44 AMHi Ramesh,
Yes, agreement uses AS2 IDentifiers. Incoming messages are recognized correctly, and we send back sync MDN that is correctly received by our TP. They also recieve our messages correctly although Oracle B2B does not recognize the MDN from them. I think that this causes that, now after applying the latest MLR patch, B2B tries to send it around 6 times and gives the Unexpected EOF error.
Thank you for your help in advance,
Kind regards, -
My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process: SafariDAVClient [5937]
Path: /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier: SafariDAVClient
Version: 106
Code Type: X86-64 (Native)
Parent Process: launchd [202]
Responsible: SafariDAVClient [5937]
User ID: 501
Date/Time: 2014-02-02 15:40:22.026 -0800
OS Version: Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.
Maybe you are looking for
-
Content Alignment and Spacing between UI elements
Hi, In my VC model, i have a form (where the user enters search criteria), below the form, the results are displayed in a Tableview, below the table view i have a TEXTVIEW to display the error message like "No Records Found". I am able to control the
-
Hi, I've got a 160GB drive in my iMac and all of a sudden I have only 3 GB left when I usually tend to keep 15-20 GB free space. I can not guess what Iv'e done lately to fill it up and I've browsed my movie, photo and music libraries for abnormalitie
-
-43 error when trying to update to IOS 5.0.1
I get this error message when I hook up to Itunes for updates. I've already went to local Apple store for help.
-
Premiere Pro crashes and won't let me open it
everytime I try to open premeire pro it crashes and will not let me open the program. All my other cloud programs work great. Im running Mac OSX 10.8.5 HELP!!
-
hi Experts, Im trying to understand the below sentence,in which CAF is a framework to develop Composite Applications according to ESA. I want to Know about SOA and ESA,not only their Business Perspective but also their Architecture. Please guide me c