Identifying of Missing PO's with 2LIS_02_SCL

Hi!
I have problem with 2lis_02_scl. By accident some one have deleted the queue SMQ1 from R3. Now we are missing the data from time we have schedulled the last load to BW upto time of deletionof Queue. I am trying to identify those records which have missed by that deletion of queue. So that I can fill the set uptable and do the repair full request for those PO.
Can any one suggest me is there any way I can find out the PO which are missing. Are there any tables/Fields by which I can identify the PO which are missing with reference to date and time.
Suitable points will be awarded.
Regards
Sudheer.

Nice to know, and interesting too.
All incomplete PO's will not be extracted by std. extractors 2LIS_02_ITM.
One can check the incompleteness using EKKO-MEMORYTYPE.
This may be useful.
Thank-You.
Regards,
Vinod Bokade

Similar Messages

GI quantity Delta issue with 2LIS_02_SCL

Hi Friends !
We are facing delta issue in the BI Prod. Hence to look into the issue, performed few steps in Test environment to check whether delta is performing or not. Mentioned below are the steps which are carried :
1. BW Setup
a. Deletion of queues for Purchasing data in ECC
b. Data collection of purchasing documents for March 1 u2013 March 31 in ECC
c. Deletion of source system initialization in BW
d. Loaded collected data into SAP as delta initialization
Result - OK
2. ECC data entry
a. Created PO #5052422, intracompany STO from DDP1 to USC1
i. 1 line item (qty 5) with two schedule lines (qty 2 & 3)
3. First delta run
a. BW brings over 2 schedule lines for PO #5052422
Result - OK
4. ECC data entry
a. Created PO #5052423, intercompany from DDP1 (USC1) to IRP3 (BV11)
i. 1 line item (qty 5) with two schedule lines (qty 2 & 3)
5. Second delta run
a. BW brings over 2 schedule lines for PO #5052423
Result - OK
6. ECC data entry
a. Posted partial delivery for schedule line 1 of PO #5052422 with a quantity of 1
7. Third delta run
a. no records brought over (change to GI quantity should trigger delta)
Result - FAIL
8. ECC data entry
a. Posted partial delivery for remainder of schedule line 1 of PO #5052422 with and a partial delivery for schedule line 2 with a quantity of 1
9. Fourth delta run
a. no records brought over (change to GI quantity should trigger delta)
Result - FAIL
10. ECC data entry
a. Modified delivery date of both schedule lines of PO #5052422
11. Fifth delta run
a. Both schedule lines of PO #5052422 brought over with updated delivery dates and goods issue quantities
Result - OK
12. ECC data entry
a. Modified delivery date of both schedule lines of PO #5052423
13. Fifth delta run
a. Both schedule lines of PO #5052423 brought over with updated delivery dates
Result - OK
Ques :
1) When modified, GI quantity is not triggering delta. Please advise.
2) 2LIS_02_SCL extractor is build on which delta field.
3) How delta works & behaves with 2LIS_02_SCL extractor?
With Regards
Rekha

Good afternoon Rehka,
I believe that it is correct that the GL change you mention will not trigger a delta on the BW side. This functionality appears to be missing.
If you check in LBWE you will see that the EVENTS for 02: Purchasing -> MC02M_0SCL include the following:
MA: Purchase order
MB: Goods receipt
MC: Invoice receipt
MD: Scheduling agreement
The event associated with a Goods Issue is ML and not included in the list of events for this structure. This is the standard behavior.
I checked and I was unable to find a datastructure that does handle event ML. From what I see the only way to do this is through a custom datasource.
Kind Regards,
Des

Apple Configurator error app's identifier is missing when creating a deployment profile.

Hello,
I have a Bretford Powersync cart and I have a Macbook Pro with Apple Configurator on it.
I don't have any iPads yet connected they will come in next week, there will 30 of them.
I'm creating a profile and payload in Configurator on the Macbook right now and when I add Apps to be part of the package that gets sent to the iPads, it's giving me the error "App's Identifier is Missing". I'm just highlighting a cell structure app that is free that I downloaded and trying to add it.
I heard you have to add the .ipa file, but I can't find an .ipa file anywhere. When I search for .ipa it just shows me the same Cell Structure App icon and I end up getting the same error.
Just trying to get around this error message.
Thanks,
Matt

It won't let me edit my post, so I'm typing this reply to add...
I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated.

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

Missed event monitor with event reset

I have pretty simple request for Scom monitoring, but I don’t know how to do it. My application generates an event in custom log with name Mpis. Event level is Informational, Event ID is 10 and source is Mpis. This event is created every
5 minutes. If application failed, event isn’t created. I have a need to create an alert, if event isn’t created more than one hour and monitor must go into unhealthy state (red). If same event come back, monitor must resolve itself and go back to healthy (green).
I try doing this with missed event monitor with event reset, but they don’t work as I expected, probably because I use the same event for trigger an alert and resolve an alert. Any idea ?

There must be something misconfigured. Missed Event Detection -> Windows Event Reset is the correct one.
Use Event ID 10 and Source Mpis as expression in both Simple Event Expression and Missing Event Expression. in Missing Event Detection, use "Based on fixed simple recurring Schedule" and choose 60 minutes/1 hour.
I have configured this in my environment, and this works perfectly; if no events are logged within an hour, i get an alert. If i then create the event, the alert Closes.
www.coretech.dk - blog.coretech.dk

CCR Error 154 - Planned Order Missing in R3 with External Key

Hi Experts,
We have duplicate orders generated for E Type products at a particular locations. When I went into the CCR then one error was observed - Planned Order Missing in R3 with External Key (CCR Error 154). And all the duplicate orders which were of PPDS Orders only came into the CCR log.
Request you all that if anyone has any information regarding this then please reply.
Thanks and Regards
Joseph

Hi,
This error occurs in cases where order is deleted in APO and not deleted in R3.
Reason and steps to be followed in CCR:
Orders once deleted in APO wil have change pointer R and orders created in APO which has to flow to R3 will be having change pointers C.
In this case you need to follow the steps mentioned below.
step 1 select change pointers icon x then do iteration . This will delete the orders in R3 and bot R3 and APO will be in sync.
w/o selecting change pointers icon X if we do the iteration you will get PPDS planned orders in APO since orders to be deleted in R3 is not actually deleted and flow back to APO and hence you will have duplicate orders.
step 2 select orders with change pointers C , seletc the change pointers icon X and do the iteration.
This will publish the orders in R3 and will return back to APO.
In your case step 1 was not followed and hence you are getting duplicate orders.
Thanks,
nandha

Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

If the images are not identified as missing ... then you can't reconnect them
But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

How to identified which instance is associated with which Listener

Hi all,
i created one DB instance. suppose named as "B". but there is already another DB instance present. Named as "A".
Then i created one listener for DB instace "B".
Now my Que. is that HOW i can identify which instance is associated with which Listener,.
2) if i create listener then a service also created. if i stopped that service and then can i fire query OR Login again, WHAT will be the expected result.
I tried by asking people for my answer. but not satisfied.
Please Help me For this.
Thanks in Advance

see the file listener.ora. path is usually, $ORACLE_HOME/network/admin/listener.ora
You will see which listener is associated with which file,
Details will be usually like this
>
LSNR1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = instance1)(PORT = 1666))
LSNR2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = instance2)(PORT = 2666))
>
>
if i create listener then a service also created. if i stopped that service and then can i fire query OR Login again, WHAT will be the expected result.
I tried by asking people for my answer. but not satisfied.
>
A listener is used when a client wants to connect to the database server. If you are logging in directly on the server without using instance name, then you can login even if you stop the service.
check this,
C:\Windows\system32>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 03-MAY-2011 23:06
:22
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\Windows\system32>sqlplus ganesh
SQL*Plus: Release 10.2.0.3.0 - Production on Tue May 3 23:06:36 2011
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from dual;
D
X
SQL>But if you try to connect from a client, or use the instance name while connectineg
you get the error like this,
SQL> conn ganesh@ganesh
Enter password: ******
ERROR:
ORA-12541: TNS:no listener
Warning: You are no longer connected to ORACLE.
SQL> If you see, I used the instance name @ganesh.
G.

HOW i can identify which instance is associated with which Listener

Hi all,
i created one DB instance. suppose named as "B". but there is already another DB instance present. Named as "A".
Then i created one listener for DB instace "B".
Now my Que. is that HOW i can identify which instance is associated with which Listener,.
2) if i create listener then a service also created. if i stopped that service and then can i fire query OR Login again, WHAT will be the expected result.
I tried by asking people for my answer. but not satisfied.
Please Help me For this.
Thanks in Advance

856376 wrote:
i want to start my carreer in DBA.
In what manner i ahve to prepare my self.
Your guidance will help me lot
Thank youLike everything else, the answer is "it depends".
What is your background and experience with computers, networks, operating systems, programming languages?
What are you currently doing?
What formal and or on the job training have you had?
As Aman said, build yourself a test system and play with it. You can do this at no cost by ...
1) download and install VMplayer (vmware.com). It is legally free. For an investment in your career of about US$185, you can buy VMworkstation, which has the same fundamental capability plus some nice management features.
2) download and install Oracle Enterprise Linux (oracle.com). It is legally free. If you want a support contract, you pay for that.
3) using (1) and (2) create a virtual linux server
4) download and install Oracle Enterprise edition database (oracle.com). It is legally free for personal eduction.
5) install (4) on (3).
Beyond the above questions I have some boilerplate replies that fit here . . .
if people want to be professionals in ANY field, the first knowledge they need to acquire is how to locate AND USE+ the fundamental reference materials for that profession. And the most important trait, the one for which they are really hired, is the ability to do independent research, and having a modicum of curiosity that would drive one to do that research. We don't mind helping newbies, and even the most experienced person on this board will run into something they are not familiar with, or occasionally just require a second set of eyes to look at something. But a professional+ needs, above all, a willingness and capability to check the docs. A professional isn't necessarily someone who has all the answers at their fingertips or has a full understanding about every arcane subject in their field. It certainly isn't someone who has an encyclopedia full of memorized answers but little understanding of how it all fits together. It's someone who knows where to find the answers when needed, how to recognize them when he sees them. It's less about knowing than it is about attitude. Everything you asked can be answered in the Oracle Concepts Manual at tahiti.oracle.com. You should bookmark that site.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.

PO : Invoice value in ME23N is not matching with 2LIS_02_SCL field BWGEO

Hi Expert,
              1) Invoice value in ME23N tcode is not matching with datasource 2LIS_02_SCL field BWGEO in item level
for few item BWGEO field contain the data with tax but for few item the value is not coming correctly.
2) The value is not matching for that particular item which has same material document in other Item level.
eg. PO(eg 60000XXXXX) if item 1 has invoice value with tax is 1300+52 and its material doc is XXXX1234. if same material doc XXXX1234 is present in
item 2 for another invoice of same material invoice value with tax is 1200+48. In that case the value which is coming in
BWGEO field is 1300 only.
I am working in 7.0 system for AFS specific. My whole transaction is in INR.
Thanks and Regards
Lalit Kumar

Please review the information below from one of our deverlopers
- it may explain the behaviour you are seeing on your system:
When posting a GOODS RECEIPT for a DELTA UPLOAD process you only will
have the information regarding the GOODS RECEIPT values (XMCEKET-WEMNG
and XMCEKET-WEWRT) and not the invoice values (XMCEKET-REMNG and
XMCEKET-REWRT).
When posting an INVOICE for a DELTA UPLOAD process you only will
have the information regarding the INVOICE values (XMCEKET-REMNG
and XMCEKET-REWRT) and not the GOODS RECEIPT values (XMCEKET-WEMNG and
XMCEKET-WEWRT).
The DELTA INIT process is different, because for this process, all
information about posted documents against a purchasing order need to
processed again and this means that all documents related to an order
(invoices, goods receipt, deliver costs, goods issue, etc)
are read from database and rebuild one by one in the same process, and
of course this information in available.
When posting an invoice, the goods receipt information is not
available because of the following reasons:
1 - System standard fields.
In datasource 2LIS_02_SCL, there is only
fields BWMNG - that represents quantity, BWGEO and BWGEO that
represent values. The information under these fields are dependent
from the information of field BWVORG (BW transaction key). This field
determines whether these values are from a purchasing order, goods
receipt or an invoice. You never have a missing information, but when
you want to get goods receipt values, you need to check where the
BWVORG correspond to goods receipt process and not invoice.
2 - Performance
There are documents as purchasing orders and schedule agreements that
are opened for years in some customer system (it may not be your case),
where goods receipt and invoices have been posted during all this time.
Every time that a new document is posted in order to built the
cancellation sentence (ROCANCEL = X) and in order to add the new
value in the old, system need to process all previous posted documents,
and this means processing time. For this reason when posting invoices
only previous documents that are invoices are taken into account and
not goods receipt.
The delta fields, DBWMNG and DBWGEO, are the difference between the
purchasing order quantity and values and the goods receipt quantity
and values, then is natural that this information is only available
when processing a goods receipt and not when processing an invoice.
I'm sorry if this is not the system behavior that you are expecting,
but this is the normal standard behavior and this is really necessary
because of the system performance when dealing with documents that
have a long order history.
Hope this information is useful for you
Best Regards
Barry

Problems with 2LIS_02_sCL

Hi,
I am facing more or less the similar problem.
I am using 2LIS_02_SCL to pull purchasing data from R3.
and using 3 process keys for Po, GR,Invoice for this extractor.
the extract structure is enhanced to add the delivery indicator and is populated by the code by looking up at the EKPO table irrespective of the process key.
Which means that ideally if indicator was set for Po,item for process key 1 then the indicator should be set for process keys 2 and 3 as well. But I have identified some records where DELEIVERY COMPLETED INDICATOR was set for process key 1 but not for 2 and 3.
Can any one help me on this.
Regards
Sudheer

Hi Andrea,
As far as I know there are some problems with extractor 2lis_02_scl. In my previous client we had problems with the "delivery completed" flag, that was not always correctly updated.
What we finally got from SAP is that we should update R/3 Plug-in to latest version, cause there that extractor behaved better (it was version 3.1).
Maybe you have to open a customer message to SAP...
Regards,
David.

How to identify the missing reecords once load was performed

hi experts
if load was performed and we found some missing records are there how to identify them and how to populate them again. if the records are only few we can manually find them and selecting and info package level in data selection we can send them but if they are millions of records how to identify them and how to solve this kind of issue.
is there any solution for this apart from data reconsillation
thanks in advance

Hi,
Generally who is accessing the reports(End users) , those only can findout that if any data is missing in the data load and showing any wrong data.
They will know and compare the data in R/3 inform to BW team , what they got wrong data insted of Original data.
According to that we need to Analyse the data flow BW >>> R/3 -( Top to bottom we need to check all the data targets by giving the missing values)
To see the contents we use the T.code is : LISTCUBE ( Here you can see the content and request IDs and source) , according to the we need to analys and find , whether problem is occured
LIST CUBE : To see the contents of data targets in BW side
In the below cases data will show wrong in the reports
1. If the data was not loaded into BW side.
2. Even if the data is loaded into BW side, Some times Due to the incorrect rotines/update rules the data might be showing wrong in the reports.
3. If any issue with varibles/ C.KF's/ R.K.Fs used in the reports, the data will show wrong due wrong calculation.
4. if any wrong selection in the varibles also will show Wrong data.
So, we need to analys all these things and compare with R/3 data,
First we need to check the data in BW Intial load data target by comparing the R/3 data source with extract checker (RSA3)
RSA3 : Extract checker in R/3 side
in some cases, you need to check the data base tables if the datasource is Generic
RSO2 (T.code) - To display Generic data source and findout the tables.
After Analysis, if you find out that if any data is missing from the source system , you need to run Repair Full request, which is not effect previous delta
Repair full request :
Go to info package :>> setting as Full insted of delta
change the setting in menu >> Check mark for repaire full request
Selection : Give the selection for missing record in the infopackage in selection Tab
After this you will get the as per your selections, without distrubing your delta load >> next you can run your delta load as usal
I hope it may help you to analys the issue.
Regards.
Rambabu
Edited by: Rambabu velanati on Mar 24, 2011 12:32 PM

Jabber 9.1.2 missing DLL's with Win8 64bit and WebEx Connect

I realize that Windows 8 is not yet listed as supported operating system for Cisco Jabber for Windows, but I would like to make it work anyway I am trying to use Cisco Jabber for Windows 9.1.2 on Windows 8 with WebEx Connect. I am able to log in and IM just fine, but when I attempt to launch an Instant WebEx Meeting the first time, I receive the error
"WebEx Meeting is unavailable. Unable to connect to WebEx meeting server. Please try again later."
However, for any subsequent attempt to launch an Instant WebEx Meeting, I receive three errors in this order:
1) The program can't start because atWbxUI14.DLL is missing from your computer. Try reinstalling the program to fix this problem.
2) The program can't start because ATKBCTL.DLL is missing from your computer. Try reinstalling the program to fix this problem.
3) WebEx Meeting is unavailable. Unable to connect to WebEx meeting server. Please try again later.
In both cases (fresh install and subsequent attempts) I receive an email letting me know that my meeting is in progress. So, I know that it has connected to meeting center and set up the meeting. It just can't seem to launch the WebEx interface. I have no problems launching WebEx by any other method that I have tried (e.g., Productivity Tools, from a browser, or if I uninstall Jabber and install the WebEx Connect client).
Has anyone seen this one?

I had actually tried that already, but just for kicks I did it again. Webex Connect was not installed. I uninstalled anything that had the word webex in it. I uninstalled Cisco Jabber. I went through C:\ProgramData and C:\Users\[username]\AppData\, and I deleted anything that had the words Webex or Jabber. I rebooted the computer, I installed Cisco Jabber. I rebooted the computer again before starting the application. Then I went into meetings and clicked "Instant WebEx Meeting." It gets to the point where it is installing the webex plugin. Once the WebEx plugin installion completes, I get the same error as before.
Since Windows 8 is not listed as a fully supported operating system for Cisco Jabber for Windows, I suppose this kind of thing is to be expected. I was just hoping that maybe someone had found a work around.

Time Machine did not restore my MacBook Pro, many iOS apps were missing and replaced with "?" in the dock.

Hi all,
This weekend I had issues restoring my MacBook pro using Time Machine. I was left with question marks in the dock for the folloing apps in Bold, the others are not on the dock but they could not be found..
1. Safari
2. LaunchPad
3. Missing Control
4. Mail
5. System Preferences
6. Photo Booth
7. Terminal
8, Itunes
9. Disk Utility
10. iText Express
11. Notes
12. Maps
13. XCode
14. iPhoto
15. Calendar
They were not in Finder, and as the Lauchpad icon was not there I could not check there either. Spotlight was not showing them either. They simply were not there on the Mac.
I checked on Time Machine and they could not be found there either. I don't believe they were backed up by Time Machine in the first place. I do not have any programmes or applications excluded in the TM preferences.
Its interesting that all my 3rd party apps were there, all the missing ones are from the Maverics iOS.
I ended up having to reinstall Mavericks via a VERY SLOW internet connection and hey presto, everything came back to normal.
It was a very tense few hours as I thought I had lost the lot, photo's and itunes collections etc.
Time Machine is sold to us by Apple as the perfect solution to keep your data safe and recoverable.... Really?
I do like Apple products, but this has left me a little unsure about them now, its like the trust and confdence goes when you catch your child stealing and lying to you...The confidence will come back but I guess I will always be a little warey now..
Apple, please do something about this - I have paid through the nose for a robust system that I can rely on, not one that has aged me by 10 years...

It appears only the applications where missing. So your own data were safe all the time. However...
There appears to be a bug in Time Machine that causes it to exclude items that aren't supposed to be excluded. To check if that is the case, you can find more information here: http://pondini.org/TM/D10d.html
It appears the bug is very difficult to reproduce, mainly because in most cases it is only discovered when people try to restore an existing installation.

Music files missing after sync with iTunes

All of my devices are updated to the last version.
I created playlists to manage syncing music from iTunes to iPhone.
Sometimes my music files would be missing on my iPhone 6 running iOS 8.1 after sync with iTunes 12.0.1.26.
When music missing, they look OK in iOS playlists, but will appear a "waiting for copy” symbol on the right side then jump to next song one by one when I try to play.
It's really weird because it happens randomly, I totally have no idea when it will happen again, more even far from why ...
Zen style APPLE !!

It sometimes takes awhile for the info to download from itunes.
try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Identifying of Missing PO's with 2LIS_02_SCL

Similar Messages

Maybe you are looking for