Idle printing message when printing wirelessly from a Mac - HP Officejet 6600

I am having an issue with my HP Officejet 6600.  When I try to print from my Macbook Pro I keep getting an idle message on the print screen.  It is showing that it is connected, but will not print.  In addtion I have been able to wireless scan to my computer from the printer and test print from the utilities window on my Mac.  This problem is baffling because it was able to print last week and now can't.  Also the printer will print wirelessly from my PC, but not the Mac.  Please help.
This question was solved.
View Solution.

Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • "Communication Error" message when printer is the AirPort-connected

    After two years of using (and hundreds of pages printed), the printing on the Epson Stylus Photo R340, connected to the AirPort Express ('n' edition) ends just after a few centimeters of printing (now it's in 100% cases), showing one of the error messages below:
    - Printer paused (resuming/re-pausing leads to no further progress). In this case the printer is sometimes paused also un System Preferences > Print & Fax, but resuming in this level again leads to no progress
    - Printer shows "Communucation Error"
    - Printing dialog shows no error or pausing, but the result is the same as above
    Removing the print task in printing dialog doesn't have any influence on the printer. In all these cases it's necessary to turn off the printer to start from the beginning.
    When the printer is connected straight to the computer via USB cable, it prints as expected.
    There were no software installations recently, except Apple system updates via Software Update.
    Does it mean that Apple kisses the air printing goodbye or there's still hope to fix it?
    Thanks for any ideas

    Hello Syd,
    thanks a lot for your suggestions. I appreciate Epson is monitoring forums like this! As I wrote above though, some of them I mentioned as performed (printer connected straight to USB port of the Mac). I also several times erased all the printers and added them again fresh, but unfortunately all still the same.
    Just a few weeks ago, I printed a few dozens of pages and this happened after every about 20 pages and after printer restart, I was able to continue. Since I started this topic, the printer will not finish any single page over the AirPort Express, but prints fine when connected directly to the mac via USB.
    I just don't want to bring it across the house (yes, I know I can share it on one computer for the others, but there's no room near the computer I work on and in addition, it worked before...).
    So it looks like bad luck for me so far...
    Message was edited by: Bjoehy

  • Error message when printing Sales Order

    Hi,
    I get following error message when printing out a sales order just created.
    No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
    Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
    What could be the problem?
    Thanks,
    Ajay Audich

    Have you tried with system PLD?
    Thanks,
    Gordon

  • "Prop bitmap dll not loaded" message when printing PDF

    Getting "Prop bitmap dll not loaded" message when printing PDF.  Message started occuring after Adobe Reader upgrade to version 11.  
    Windows XP
    Lexmark P6250 printer
    Firefox v17.0.1
    Adobe Reader v11.0.0
    Thanks;
    Paul

    Can you try to install the latest Lexmark printer driver (http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LE XMARK_P6250&page=product).
    If that does not help, see this thread http://social.technet.microsoft.com/forums/en/officesetupdeploylegacy/thread/6bdf9d5d-1b14 -4789-b6ee-3aff66889f42

  • How can i choose a lower quality print density when printing from firefox on my Mac. I cant move the slider along the scale ( I can when printing from the computer).

    I can't change the print density when printing from Firefox. It is set at standard and although there is a "slider button" to use for choosing less or more density, it can't be moved. I can tick "grayscale". I can choose the density when printing from the computer. I have a Mac

    I also have this problem where I used to be able to shrink a 2 page doc to a single page. Since upgrade to FF4 it no longer works - but you can choose say 60% and it will work. All used to work fine in FF3

  • How do i print wirelessly from my mac to my canon pixma MG5200

    How do i print wirelessly from my mac to my canon pixma MG5200

    You want to look at this link first. it is in the article popsted above but I figured I post a link to in here so you don't miss it. It has to be the first thing you do.
    http://support.apple.com/kb/HT3500
    You have to first connect your printer to your network. Along with that Apple article read the printers setup instruction.

  • HP 8500 A Plus only prints half of first page from my mac

    When I print wireless from my mac it only prints half of the first page (regardless of how many pages the document is) then stops.  This only happes with my computer.  If I make a copy or print from my phone everything works fine.  I've had this printer for about 2 years and this is a new issue that didn't used to happen.  I do not get any error messages when this happens.
    Any ideas?

    There is no full feature software and driver for your printer that is compatible with Yosemite @1Adam12 , so we know the issue is not the software. Let's try the following steps in order to resolve this;
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and download and install the HP Printer Drivers for OS X.
    Now when you add the printer, you should have the HP driver to choose,
    Select Add other Printer or Scanner  
    Select the printer you are adding and next to 'Use' you can the printer driver 
     Please let me know if you can print a complete job now.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

    HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
    OS: Windows 7 Ultimate x64
    Browser: Google Chrome 15
    HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
    Printer is connected by WiFi to 4 computers

    Hi AbZu, 
    You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
    http://support.google.com/chrome/?hl=en
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in

    I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher).  Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable.  Would prefer a laser, color, all in one.  Does anyone have printer suggestions that you know will scan wirelessly?

    Great information.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Why can I not print to my HP CM1415fnw from my Mac, but I can from my PC?

    Why can't I print from my Mac 10.6.8 to my newly purchased HP CM1415fnw (supposedly air print enabled) but I can print to it from my PC?  I thought mac's we're supposed to be easier and this printer is not discoverable wirelessly on my mac or iPad/iPhone/Ipod, but it is from my PC?  I can only print from the mac/iPad/iPhone/iPod to this printer IF the wired cable is installed.  Seems like HP has the problem, but the mac can't even pull up the printer's web page unless there is a wired ethernet connection.  Yes, it is working just fine wirelessly with my PC's on the network.

    Go to the Apple contact page and the first section should say something like "To purchase by phone, please call..."
    Call this number and order a Snow Leopard DVD.
    http://www.apple.com/??/contact/
    replace the ?? with your country's address code, e.g. http://www.apple.com/uk/contact/
    or if you are from America it's simply http://www.apple.com/contact/

  • HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    Check the printer itself.  Some printers you need to set the color & B&W settings on the printer itself instead of the Mac.   If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one. 

  • Any way to get more than 100% zoom on print jobs when printing multiple pages?

    I know how to increase the size of a print job, when I am printing one page at a time. But when I go to print 2 pages at once (the multiple page print function), there are always large margins around the page. I'm ok with saving paper and printing up two pages, but it seems silly to see small print and wide blank margins. Is there any way to increase the print zoom, when printing multiple pages per sheet of paper?

    I once overshot the limit by marking too many photos to fit within 99 pages, but I could never figure out how to fool the application and had to give up trying to add those 14 extra photos.
    I asked a friend (who practically lives in Terminal) if he had any way of modifying that limit, but he reminded me that if their printing services are set up to bind books and bill for only 99 pages, fooling the application might be useless if the service only prints me a 99 page book and discards the additional pages.
    I can understand that you wouldn't want to let people print 1000 page books, but I sent feedback anyway to allow me to increase the limit. Anyone know of any service that lets you print beyond iPhoto's limits?

  • Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing a PDF

    Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing on a domain, this only happens when I print a PDF.
    I then have to restart the print spooler to get my printouts sent to the printer. I am using a Windows 7 32 & 64 bit environment on a domain. Users who aren't on the domain experience no issues and their printer drivers remain online and not grayed out.
    When I print a PDF using Foxit Reader or Nitro PDF then all works fine, the moment I open a PDF using Adobe Reader X or XI then the shared network printer driver bombs out and I am back restarting the print spooler. If we roll back to Adobe 9 then we dont have any issues.
    When you create a local printer driver all works fine, the problem is we don't encourage local printer drivers due to security.
    We use Ricoh printer drivers, the MPC5501 PCL5C, driver version 1.2.0.0 with PDK version 12.65. We have also tried the PCL6 printer driver and Universal printer driver. All give the same result. The printer uses Winiprint Print processor using RAW as the default data type.
    We have contacted Adobe Global Support who advised that they cannot assist with this query as this is on a Domain environment and we have to contact our IT Department.
    We would really appreciate some professional help here to get a fix for this issue in order to address potential future occurance's

    Try to turn off any video acceleration on your graphic driver for your graphics card.

  • Message.app Version 7.0.1 (3322) does'nt show my picture when I chat from my mac Lion 10.8.5

    Message.app Version 7.0.1 (3322) does'nt show my picture when I chat from my mac Lion 10.8.5
    But my email show my picture.

    Thank you for your prompt reply, Niel.
    The website that I will use supports the following browsers:
    Internet Explorer v.8
    Internet Explorer v.9
    Internet Explorer v.10
    Internet Explorer v.11
    Mozilla Firefox v.32
    Google Chrome v.37, v.39
    Safari v.5.1.7 (PC) and v.7.0.6 (iOS)
    Other browsers and versions may not function well with the website. Therefore, they recommend to use one of the above-mentioned browsers.
    Can I download any of these browsers to my MacBook Air if I already have a Safari browser? (can I have 2 browsers and which of those do you recommend that I download to my computer)?
    Thanks again!

  • Load x# of messages when sending email from my pop account

    Hi
    I'm getting a "load x# of messages" when sending email from any address on my pop account. No problem receiving messages from other accounts. Is there a setting that can remedy this?
    Thanks

    My z10 is going back today, for multiple reasons
    Contacts won't sync across
    Won't work properly with my car when all previous BBs did
    Lots of useful features have disappeared
    But most importantly NONE of my email accounts will send mail from it when they all did previously with the Storm2.
    A big thumbs down from me for the z10 even if it is a fancy looking phone and the browser is much better. I stuck with BB because I wanted a tool not a toy

Maybe you are looking for

  • Help! Can't get IDE 3 - SATA to work.....

    Hi all, after going to some of the threads regarding SATA/PATA IDE controller and setup, I am even more confused. I built my first system back in January and had some issues with my video card (ATI AIW 9800 Pro), which are now finally resolved (after

  • CS5 (and CS4) crash upon quitting - can't understand crash report?

    I was wondering if you can tell from this crash report why Photoshop CS5 on Snow Leopard always crashes when I quit. The other CS5 programs don't have this problem, but I did have the problem with CS4. Perhaps it's a plug-in, but I removed all 3rd pa

  • Grand Total Title

    Hi Experts, In answers in table view , i've grand total that displays sum for one columns and average for another column. My problem is in the Grand total label, Is it possible to have more then one label ? thx

  • PLD settings in Document Generation Wizard

    I have set the document properties in the PLD for a document so that it will print 3 copies.  Number of copies is set to 3 and the Use Sys Print Pref box is NOT ticked off. When the document, in this case an Invoice, is generated and automatically pr

  • Cisco Security Manager and User-aware firewall rules

    Hello ! I have a firewall ASA which is managed with CSM and I try to create some user-aware rules. To do this, I need to match CSM with an Active Directory server. I added an AAA server group matching my Active Directory server in the Identity Settin