Idoc collect everything good.. small issue.

Want to collect Idocs.. all steps in Bpm are correct..some error in transformation or send.
As many idocs are posted,they are all getting collected in container step..the correlation aslo works, since if different values in it are given.. it posts many files.. but with same value.. it collects the idocs.
the problem is.. the file seems to be getting overwritten.. its not writing to same file.. when correlation is same value.. as posting mutiple are posted.. it should be written to same file.. but only 1 last idoc is coming in file.. with only 1 idoc.. some problem in writing multiple values to file..
Have also defined the message interface as occurance one as sap demands for 'newfile' interface as in patterns.
please could anyone help me point out the error.. have read all the blogs and done as per patterns.
thanks a lot.

Hi Venkataramesh and Gaurav,
I tried with the append mode, its still overwriting the file.
checked in the bpm.. it gives me the workflow stepswhere the container shows 2 idocs but file adapter writes 1 file with the last idocs details.
any other place where i should make a change?
Also wanted to know that if i give append mode to the file, we need a new file with collected idocs every 2 hours. this mechanism will rewite the same fine as it does not add a timestamp option to it.
please advise.
thanks.

Similar Messages

Generate DELVRY Idoc when Post goods issue is done in SAP

I need to generate an Idoc when post goods issue is done in SAP (outbound to SAP) .I understood that I can do this using the message control .The message type DESADV with the process code DELV will support this.
But I didnt understand how to trigger the Idoc.In the current scenario our Company is doing the post goods issue in SAP for the in three different ways.
1.Manually doing the post goods issue through the transaction VL02N
2. an Inbound Interface (using Idoc) which will do Post goods Issue in SAP
3.Another Interface using BAPI, which will, do post goods issue in SAP
I have to run my outbound interface when the post goods issue is done by all the above three ways. Can any one help me out in this?

You have to configure the output first .
You can use output type LAVA ( avaialble in Std SAP ) .
( Tcode is NACE , Select Application V2 -> Outputtypes ).
( Create condition records suitable to generate an output)
Next is ALE.
Setup a distribution Model ( for DESADV ) and all other setup for ALE i.e. Distribute Dist. Model / Generate Partner Profile .
In the Partner profile in WE20 select your partner system. Double CLick on Outbound Message DESADV ( this wd be there after you generate partner profile , if not add it here in outbound ) . On this screen goto tab MESSAGE CONTROL .
Application - V2
Message Type - LAVA
Process Code - DELV.
Now you are ready to go. The moment a PGI is done in any form an output LAVA would be proposed and processed using process code DELV.
Cheers.

Everything prints small, about 25% of normal size.

Everything prints small, about 25% of normal size. It effects both of my printers. It effects WORD, Adobe Acrobat, and Excel, and anything that I print from the web.
The only document that is NOT effected is Adobe InDesign.
I've tested the usb cables, and restarted my computer. I have not downloaded any new programs or updates.
Anyone had this happen to them? Anyone have any ideas of what happened, and how to fix this problem?
Very frustrated! I have work to do!
Please help!
Thank you!
OH...my Apple Mail is also effected.
Message was edited by: green machin

Hi.
This forum is for a specific product (Adobe Contribute) which doesn't appear to be your issue. It looks like you are having printing issue rather than issues with any particular product. I would suggest finding support for your printer or your Operating System.
Good luck.

Everything so small in Dreamweaver....is there a fix?

Hi there,
For sometime now I am having this issue with Dreamweaver where it dysplays everything very small, I am at 100% and it looks exactly like the attached image.....I unchecked all the virual helpers thinking that it would help but it did not. So, Unless i start a page from scratch in DW, everything that was edited after with Front Page for example, or even after saving in DW and re-opening at a later time looks very very small and I can't see what I am updating.....is there a setting somewhere that is responsabile for this behavior?
Thank you very much.

Hi,
you only had to use another formatting for your font (as I can see using your source code in my German DW), instead of
use this:
Hans-G.

IDOC problem during goods confirmation in SRM

Hi guys,
I am facing some problem during goods confirmation in SRM.I am getting an error relate to IDOCs.i have setup the desired message and partner ID for goods confirmation in SRm but the IDOC gets stuck with the code 30 and the idicator is yellow.But when i manually reproces trhe IDOC after that it works fine.I dont want to process it manually.Can anyone help me out with the possible source of problem.
Regards,
Pawan.

Hi
Which SRM version are you using ?
Please see related links ->
Note 549846 - FAQ: Goods receipt confirmation EBP
Note 847250 - IDoc error remains in alert monitor although IDoc is ok
Othere related OSS Notes ->
Note 1049536 Incorrect reference doc year when deleting goods receipt
Note 683848 Problems with delivery note number with upper/lower case
Note 747422 Replace internal units with ISO codes - modification
Note 545657 Error in ERS procedure in back end: Delivery note missing
Note 338985 BBPCF & IV: incorrect IDocs in backend system
Note 561881 Posting of returns for partial confirmation not possible
Note 550884 Check of return delivery and reversal against back end
Note 514669 Goods receipt cannot be posted
Note 502869 Return delivery possible despite posted return delivery
Note 430153 Classic scenario: Goods receipt/issue slip, bill of lading
Note 360833 "Purchase order & is being processed", IDoc error
Note 388601 Follow-up processing for GR/SE confirmation is not possible
Do let me know.
Regards
- Atul

Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

I just downloaded update for Mac OS X 10.6.8 and afterwards everything go smaller - how to enlargen back?

I just downloaded an update Mac OS X 10.6.8 and everything got smaller; how do I enlargen it back to what it was?

You should probably think about upgrading your operating system to the newest one, which is Yosemite. It has the latest version Safari running.

IDoc Collection in BPM and Without BPM

Hi All
I'm much confused on IDoc collection for which i require your expertise to clear my doubts. My primary question is based on the context "Multimapping doest work with idocs".
consider the case -> collect files-idoc scenario. Using BPM i need to have
a multimapping scenario. In the transformation step we will have a container element where mutiline is enabled so that the collected files are transformed into one abs interface. my dopubt arises here when i consider this scenario without bpm that is N:1 mapping (no collection). in this case why this multimapping works in bpm process and not incase of non-bpm scenarios? is it because in bpm the mapping happens in BPE?
pls clarify.
thks
Prabhu

>>>>In an N:1 scenario without BPM, how could you send more than one message to your multi-mapping? You can't.
yes we cant as this validation is not supported at abap stack level and N:1 is possibkle without BPM (or i'm missing something here). but this same step with bpm get executed succceffuly. whats the logic behind it
Message was edited by:
Prabhu S

What is the difference beween idoc package and idoc collection

Hi friends,
    i am unable to understand difference betwen Idoc package and Idoc cillection.
    Please give me clear clarification.
Thanks and regards
Bhanu

Hi Bhanu,
Apart from the replies above, in case you're looking for an answer from ECC perspective, here are some inputs: (ECC is considered as sender here)
1. IDoc Collection:
   This will collect the IDocs and will not immediately send it to the target system after they are created. Program RSEOUT00 can be later scheduled for these collected IDocs to deliver them to the target. You can treat this as a park and process approach which proves useful in several business scenarios.
This standard link gives more insight:
SAP Library - IDoc Interface/ALE
2. IDoc Packaging:
    This defines the number of IDocs to be packed and sent in 1 RFC call (tRFC). If you set is as 20, then 20 IDocs will be sent in 1 tRFC request. This doesn't connote whether the IDocs will be triggered immediately or later, this just talks about the bundling of IDocs per RFC call.
Hope this helps.
Regards,
Abhishek

Pixma 8120B prints everything too small

My Pixma 8120B prints everything too small. How do I adjust the print size please?

Hi merlin,
You can adjust the size of what you are printing by following these steps:
1. Open the item you wish to print.
2. Click on File and then Print. If File is not visible, please press the <ALT> key on your keyboard.
3. Click Preferences. If this is not available, click Properties.
4. Click on the Page Setup tab.
5. Under Page Layout, select "Scaled".
6. Next to Scaling, increase the percentage to 150 or 200.
7. Click Apply and then OK.
Print the item.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Just three small issue...

Hello All,
Well after a few months of delay (First me damaging the bois chip then me burning out the motherboard) I finally got my computer up and running. I do have some small issues that I hope someone may be able to help me with.
1.   When I shut down the computer it restarts itself. The only way I can shut it down is to hit the power button in the back of the case.
2.   When I do attempt to shut down the computer and it restart on it’s own I get no video. It also gives three long beeps. Now please understand that the video card works fine when the computer is on or when I do a manual restart. This only happens when I try to shut down the computer.
3.   When I try to use the RAID by plugging up two hard drives the computer well get stuck at the screen where it read the array configuration. The configuration can be correct with the RAID set for stripe two (WD 13GB and a WD 7GB hard drive) Western Digital hard drive’s.
Any type of help would be great. Here are the specs to my computer.
KT3 Ultra2-R
AMD 2100+ XP
512MD DDRAM
WD 20GB
Goldstar 40x12x40
Acer 52x CD-Rom
Jaton Geforce 2 MX/MX 400

wd also have funny jumperless master with no slave setting
normal master only if it has a slave
why raid none matching drives
a stripe will only be 2x smallest and a mirror size of the smallest

Quality inspection before goods are issued

Dear friends,
We have got requirement that before Goods are issued all materials shall undergo Quality inspection and then materials are issued.
How to map it in SAP.
Please suggest
Regards
Canand

Hi,
you have not made it clear that you want through QM or in the framework of Inventory management.
for the material in QM, you need to active QM view for that material and define the quality parameters for the material accepatance or rejection.
if through inventory management, you can select the stock type Quality inspection at the time of PO or Migo.
Regards
Rajesh

Small issue in Business Rules

Dear All
i have a Business Rule callingin BPEL Process based on below XSD file
<?xml version="1.0" encoding="windows-1256" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bank.com/bankbpel"
targetNamespace="http://www.bank.com/bankbpel"
elementFormDefault="qualified">
<xsd:complexType name="Client-BR-Input-Type">
<xsd:sequence>
<xsd:element name="Status" type="xsd:string"/>
<xsd:element name="is-VIP" type="xsd:string"/>
<xsd:element name="Start-Date" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="Degree" type="Degree-Type"/>
<xsd:element name="Client-BR-Input" type="Client-BR-Input-Type"/>
<xsd:complexType name="Degree-Type">
<xsd:sequence>
<xsd:element name="Degree" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
after finishing my rules and decisions, i dropped Business Rule inside BPEL and start to copy values in input parameters of Business Rule, but i face *"Exception - Problem Building Schema !" !!*
and sure my problem now in XSD file, please advise why and how to avoid ? ..

Dear All
Resolved, it is a small issue as i expected, i forget to update in/out variables to map for elements in XSD file like below ..
<variables>
<variable name="dsIn"
element="client:Client-BR-Input"/>
<variable name="dsOut"
element="client:Degree"/>
</variables>
thanks

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

Idoc collect everything good.. small issue.

Similar Messages

Maybe you are looking for