Idoc "CRMXIF_ORDER_SAVE_M02- doc_flow" data not pumped in

hi experts..
i am using idoc in my lsmw...
my basic type is CRMXIF_ORDER_SAVE_M02...
all the data can be pumped in except the E101CRMXIF_DOC_FLOW_XT node...
i only want the "Campaign" field in tcode CRMD_ORDER "service contract->header overview tab" to have the data from my flat file...but is not successful...
<a href="http://img383.imageshack.us/img383/313/47082810nh1.jpg">http://img383.imageshack.us/img383/313/47082810nh1.jpg</a>
i have mapped every possible fields...
[url]http://img383.imageshack.us/img383/6175/87083946cd7.jpg[/url]
any input is appreciated...

Hello,
I am not sure what you mean exactly, however you can test first in crmd_order
to create a lead and have a look (in debugger) which fields are needed and how they are stored on database.
Please verify also your date profile and date type and rules.
Best regards
Rene

Similar Messages

Product experation date not appearing in Idoc

Hi,
I have an EDI customer that is requesting the product expiration date on his ASN. The Idoc which I am using is 46C DELVRY03 with the message type: DESADV.
There is a field available on the Idoc for this data but no matter how we configure we canu2019t get the product Expiration date to come out.
It seems strange to me that we would need to ABAP this. What are we missing here?
Thanks,
Greg

Check you I-Doc fields, you must be missing sth for sure.
Usually I will open the working I-Doc number from the working system and at the same time I will open your Message Type from this system at the same time(Split teh screen).
I will match the both screen and delete unwanted trees structure and make it identical to each other. Transfer inbound I-Doc and note the new I-Doc number.
Use it for customer and see if it is working or not?
Thanks,
Sugauli

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error Data not received in PSA Table

when the next day we loaded 5lac records and we got the same error Data not received in PSA Table where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
Aluri

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

Idoc- File with date+time stamp, getting overwritten

Hi,
I have a scenario where in am writing Idocs from R3 to a Txt File in 3rd party system.
For an instance upon running a Tx, am generating 3 idocs. I need all these 3 idocs to be written to a single file. Hence for the file naming i have used "CREDAT_CRETIM.txt" from EDI_DC40(all idocs carry same date+time).
I have configured the file mode as Create -> using Temporary fileschema of "Ord.xfr". I need this for locking before FTP to the 3rd party system.
If i check the OVER WRITE EXISTING FILE checkbox, i get only the last idoc written to the file(overwriting previous 2 idocs).
If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.

hi BRamchan,
>>>>If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.
If you can see in moni successfully process, look in the RWB communication channel monitoring of the receiving channel, there you might find error.
regards
Ramesh P

Need to find 'Main Reference Object' field in idoc CRMXIF_ORDER_SAVE_M02

Hi experts,
pic link: http://img56.imageshack.us/my.php?image=screenhunter001fv3.jpg
I cant find "Main Ref. Object" field in Idoc CRMXIF_ORDER_SAVE_M02...
It is under Service Order created in tcode CRMD_ORDER...
Service Order -> Transaction Data -> Objects -> the most left column...
Does anybody know where that field is located or is there other way to load that field?
Thanks.

Hi experts,
pic link: http://img56.imageshack.us/my.php?image=screenhunter001fv3.jpg
I cant find "Main Ref. Object" field in Idoc CRMXIF_ORDER_SAVE_M02...
It is under Service Order created in tcode CRMD_ORDER...
Service Order -> Transaction Data -> Objects -> the most left column...
Does anybody know where that field is located or is there other way to load that field?
Thanks.

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

IDOC File target - file not getting created

I am using Realtime job for sending idoc from data services to sap. I am using idoc message as source, query and idoc file as target transform in the data flow. I have following settings in IDOC file as target
Idoc file : /tmp/costcentertest.txt
Idoc type: COSMAS01
Data store name: DS_SAP
Application server: saptest
When i send the idoc I can load the data into table or create the file in /tmp directory. After changing target to idoc file and entering the above settings i don't see any file getting created. I do see idoc was received from we05 and also show green in data management console.
I was checking if i have to change something or missing some steps.

Hi Satheesh
Check whether the order qty field is there in flat file or not. Second if the data is there then it is getting uploaded
in read the file or not. Subsequently in converted data . When the mapping is correct and data is getting populated
in read file and converted file it will get uploaded. Hope it will help you.
Thanks
Sushant

Diff... between ALE, IDOC, RFC, BAPI, BADI --- Not clear and clarify

Hi All
    I am learning XI and the difference between " ALE, IDOC, RFC, BAPI, BADI "
    Not clear and when to use what and how in point of XI ?
   Pl..clarify me
Adv..thanks and points
--- Rakesh Behera

Hi
This will expalin you every thing ...pl..go through
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
I hope this will help you to understand the difference bet..those
regards
--- prasad

Master idoc is created but not communication idoc

Hi Experts,
Thrugh the change pointers i m sending the customer master data through idocs ,
there master idoc is creating but not the communication idocs .
it is not triggering the function module MASTER_IDOC_DISTRIBUTE.
How to rectify this ,, please anybody asap..
Regards

Initially, check the Partner profiles(Sending and Receiving), port definitions and Distribution model(where the model view should be distributed).
Check out for any filters added, enable change pointer also.
Cheers..
Santosh.
Reward Points for all Usefull Answers.

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in Data target

Hi,
I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
"Data not received in InfoCube / PSA object / InfoObject
Diagnosis
Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Data not received in InfoCube / PSA object / InfoObject

Hi Experts,
i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
i hope you all understand my problem. if so please advise.
Thanks,
RK
Edited by: RK on May 21, 2009 6:48 PM

Did you try looking into short dump about the problem ?
try these links :
Short Dump "Data not received in InfoCube / PSA object / InfoObject"
Short Dump "Data not received in InfoCube / PSA object / InfoObject"

Data not received in PSA Table 0ORGUNIT

Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
K

You can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh

Idoc "CRMXIF_ORDER_SAVE_M02- doc_flow" data not pumped in

Similar Messages

Maybe you are looking for