Product experation date not appearing in Idoc

Hi,
I have an EDI customer that is requesting the product expiration date on his ASN. The Idoc which I am using is 46C DELVRY03 with the message type: DESADV.
There is a field available on the Idoc for this data but no matter how we configure we canu2019t get the product Expiration date to come out.
It seems strange to me that we would need to ABAP this. What are we missing here?
Thanks,
   Greg

Check you I-Doc fields, you must be missing sth for sure.
Usually I will open the working I-Doc number from the working system and at the same time I will open your Message Type from this system at the same time(Split teh screen).
I will match the both screen and delete unwanted trees structure and make it identical to each other. Transfer inbound I-Doc and note the new I-Doc number.
Use it for customer and see if it is working or not?
Thanks,
Sugauli

Similar Messages

  • System Status "SETT" of Production Order is not appearing

    Hi Friends
    Production Order is not achieving system status of "SETT" even after settlement of an order resulting in incorrect output in Order informatiojn system.
    Please let me know the possible reasons for the same.
    Thanks
    mahesh

    Hi Mahesh
    Please remove the tick in the check box no display in BS22 transaction against SETT status .
    regards
    Ranga
    Message was edited by:
            Ranganathan Srinivasamurthy
    Message was edited by:
            Ranganathan Srinivasamurthy

  • Data not appearing in the DSO

    Hi experts,
    Based on requirement i have enhanced the DSO already exsisting in production system with new infoobjects and enhanced the required fileds in datasource level also and transported to production sysem.I have made certain changes in report level also by taking the newly added infoobjects and transported in production system successfully.
    My question is when i am going to execute the report it is showing there is no applicable data found.
    We donot have the data at source system level for the new infoobjects but the data is present for the previously exsisting infoobjects. when data is exsisting for the old infoobjects which were exsisting before i made the changes to the dso then why the report is not fetching any data from the dso.
    Note :- The DSO is exsisting in active stage only and data is present for the old info objects also.
    please clarify my question.
    thanks and regards
    pedamarla

    Hi,
    It could be possible that there are no records for the set of restrictions you are using in Report.
    Try to LISTCUBE your query on that DSO.  Use same selections in listcube.
    Check the selections and conditions used in Query and then probably you can conclude the issue.
    Regards,
    Pratap sone

  • Info-Object data not appearing in Multiprovider

    Guys,
    I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
    I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
    Is there something i am missing or any setting that i need to do ?
    Points will be awarded to the helpful answers.
    Thx,
    Soumya

    Hi All,
    Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
    Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
    Hope it helps.
    Thanks
    Soumya

  • Data not appearing in the table of MI 7.1 application.

    Hi Friends,
    I have Developed an Order Application for Handhelds in MI 7.1 as per the tutorial provided by sap on the link.
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
    But the problem is , as soon as I deploy and run the application on mobile simulater provided with NWDS Just the table header appears . The data doesn't appears under the header.
    I have checked all the steps provided in the tutorial but unable to find what exactly can be the issue.
    The Steps I followed as per the tutorial are -:
    1. Defining the Data Model and Business Logic
    2. Creating Client Data Objects (Importing From DOE)
    3. Creating a Service
    4. Creating a Query
    5. Defining the Custom Methods
    6. Defining the User Interface
    7. Creating the Mobile UI Component
    8. Creating the Web Dynpro Model and Application
    9.Applying the Component Controller Template
    10.Designing the View Layout
    11. Composing and Testing the Application
    12. Deploying and Running Your Application
    Please suggest.
    Regards
    Nitesh

    Hi Nitesh
    can you please check the following points
    1. Check the binding of the table on your UI / view to the model's table
    2. The result set returned by the query
    3. Is the data available in the CDS table
    4. Was the data sent to the device during sync and there are no pending extracts for
        your device's queue
    I also want to know if by any chance you changed any of your data objects on the DOE?
    If yes, then you will have to reimport the model again in your application and redeploy it
    Best Regards
    Vaidehi

  • Item lines do not appear in IDoc PRICECATALOGUE

    Hi everyone,
    I'm trying to set up for sending price catalog (to customers) using transaction VPRICAT (SAP 4.6). I've created assortment, assigned material group and assortment user to this assortment, and also created a requirements profile. I'm now able to create a price catalog using VPRICAT. The problem is when IDoc is created there is only the header information in that IDoc. No item line will appear in the IDoc. I appreciate if you could help me to locate the problem.
    Thanks in advance!
    BR,
    /Shahryar

    Any idea?
    /Shahryar

  • Data not appear in ME49

    SAP
    I have problem with RFQ comparision statement sheet ((ME49). I maintained the rate, tax, delevery date, etc. with Tcode ME47 for against all RFQ's. when I take report comparision statement thru Tcode ME49, report comes but in QTY and Rate comes with no Price and no any rating comes.
    Can I miss any table activatation.
    during the imple., user take Z-report for Comaprision statement. in that report all datas comes.

    rgtdg

  • MATERIAL CODES IN PO OF CUSTOMER DATA NOT APPEARING AUTOMATICALLY

    Hi Experts,
    We are facing a problem regarding feeding of material codes in customer data in PO. Previously in PO we use to give scrap material number & if we press enter automatically some scrap codes (i.e. 2804020001, 2804020005, 2804020018) was getting updated in customer data of PO, but as per management instruction we have hold the old codes and created new one. Please see if we can get that material codes automatically in new scrap codes also. It will save our time and will increase our efficiency without manual feeding faults.
    So I want to know in customer data of PO i.e the scrap materials codes are maintained in SPRO settings or it is stored in some table
    S.No.     Old Scrap Code     New Equivalent Scrap Code
    1     2804020001     2804020102, 2804020039
    2     2804020005     2804020103, 2804020040
    3     2804020018     2804020106, 2804020107
    Regards,
    Manjax

    Customer Data is maintained in Item Detail of PO
    Regards,
    Manjunath

  • Product selection screen not appearing when uninstalling 11.1

    Hi,
    I installed the FR client version 11.1.1.2 onto my laptop which has windows xp. I need to uninstall it but the uninstall tool doesn't show any products to uninstall when I run it. If I click next I get a message to select a product.
    I have version 11.1.1.1 on HSS and essbase is 9.3.1 so it is a bit of clash of versions. I would expect the uninstall to be OK though. The alternative is to remove financial reporting client manually but that never a neat way of uninstalling hyperion products.
    I would welcome any suggestions
    Thanks,
    Nathan

    try to restart in safe mode by pressing F8 and then try uninstall it
    worth trying.

  • ATP check based on production finish date

    Hi all,
    customer order goods for the 02.06.09.
    Transportation take 10 days so,  by itinerary , I'll have the material avaiability date for the 15.05.2009.
    All' it's OK.
    Mrp planner , based on customer calendar, insert demand for customer date 02.06.09
    We have insert 10 days on material master as Goods receipt processing time, this for anticipate the end of production 10 days before .
    Now we need that atp check production order date not including the Good receipt processing time
    Is it possible ?
    Regards
    Sil
    When I do atp check by sales order , ato check see the 02.06.09 as avaiability date and not the desidered 15.05.09
    Any idea about haw to realised atp check on

    Hi,
    This requirement can not be fulfilled by Standard SAP. But you can address this issue via Z development.
    You need to maintain Z table with Customer and lead time. Write a BDC and run this BDC once sales order is created. So that system will change requirement date as per the Z table.
    I hope this will resolve your issue.
    Regards,
    Shailendra

  • Fs10n line items not appeared

    Hi
    In FS10n if i click on cumulative balance line item data not appearing the error MSG  is no item exists (see long text).but it showing balances. after that i have checked line item display check box in fs00 every a/c is selected? pls solve the issue

    Hi,
    If you have the NEW G/L activate the correct transaction to check the balances is FAGLB03.
    Transaction FS10N is for classical GL.
    go to transaction SE16 and check table FAGL_ACTIVEC. You can run without passing any parameter.
    Then you can see if the new GL is activate as per example:
    Table FAGL_ACTIVEC
    New G/L Acctg Active Update GLT0 Read GLT0 Method
    X
    Is this case the new GL is activated.  You will not see any values at transaction FS10N in case you are not reading or updating GLT0. Transaction FS10N read the balances from table GLT0 and transaction FAGLB03 read the balances from table FAGLFLEXT.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • VMs on Hyper -V Host Cluster not appearing in Private Cloud in VMM

    Hello All,
    We are running our production VMs (around 70 VMs) on a failover cluster (let’s say ProductionCluster) of Hyper-V hosts. I created a host group of ProductionCluster in VMM 2012 R2 (with Update Rollup
    4 installed), added all the Hyper-V hosts to this host group.
    Then I configured a Private Cloud using ProductionCluster, the job successfully completed. I verified it that my cloud was appearing in the VMs and Services workspace
    à Clouds, my cloud is appearing there. I also verified that the private cloud library was
    created, from Library à Cloud Libraries.
    However, any of our production VMs is not appearing in VMs pane. I want to assign user roles and services to the private cloud.
    I can see all the VMs when I go to VMs ribbon of host group, but not in private cloud pane.
    Please help and guide me.
    Thank you.
    Regards
    Hasan Bin Hasib

    >Is it mandatory to associate my VMs with the Cloud?
    No, it's not. You can have VMs 'outside' of your 'Cloud'.
    >Can I associate my running (production) VMs to the Cloud?
    Yes, you can.
    >Will it reboot or change the any properties of VM?
    No. The only change is the value of the 'Cloud' property.
    >Actually, my ultimate goal is to assign delegate control to the VMs' users, and not to give full rights on my Cloud to the VMs' users.
    For every VM created before your cloud were created you must assign a VM to your cloud if you want your cloud users to see\manage it. For every VM deployed to a cloud (by a user via WAP portal or if you select 'Deploy to a Cloud' option when deploying a
    VM from a VMM Console) the "cloud" property will be set automatically.
    http://OpsMgr.ru/

  • Created new data source, does not appear in the list

    Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
    thanks
    Srinivas

    Hi
    I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
    - If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
    - It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
    - Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
    thanks
    Srinivas

  • Production version is not getting created using ALE-IDOC

    Hi all,
    Am using BD10 to transfer the material from sending to receving system.All the views are geting sent successfuly accept the production version tab data of MRP4 view.The segment is available in the standard IDOC.But prodction TAB  is not getting created at receving system .Please help to resolve this issue.
    Thank you.

    Hi Sanu,
    BD10 Send Material..
    the reason might be Production tab is not created is the segment is not a mandatory..
    and the data is not populating for that fields.
    if the segment is not madatorty and data is not available for the fields in the segment ..the prodction TAB  will not be created ..
    Regards,
    Prabhudas

  • Newsstand folio not appearing despite account information and correct product id

    Hi DPS peeps,
    This issue is still on with all of my apps. Despite the fact that I have theTax and Banking Information updated on my itunes, I also have the right product IDs to all the issues on the folio producer. All folios that I have been publishing since the begining of this year are no where to be found on the newsstand.  My subscribers are lamenting that the magazine they paid for are not available to read. I have been in deep ****!
    Kindly help, what could be responsible for not making all the folios have been publishing appear on the newsstand.
    Here are the things I have done.
    - I have the right product Id for the monthly folio on the folio producer
    - I create each cover on the newsstand
    - I updated DPS on my mac
    - I updated the app to v32 and made compatible with iOS 8
    - I ensure that each magazine has cover date on the folio producer and newsstand.
    - I have unpublish and republish
    - I sent notification of all the magazine yet, they are not appearing.
    - I recreated the mobile provisioning certificates for the magazine.
    Please I await any requirement to help you investigate what could be responsible for non appearance of all my folios on all my magazines with Adobe DPS.
    I await your urgent reply.
    Thanks.

    Thanks Christophe_Jossic,
    I was wondering, which of these In app is ok for my individual retail folio? is it Consumable, Non-Consumable, Auto-Renewable Subscriptions, or Non-Renewing Subscription because I am confuse as to which is appropriate. I felt I just have to be adding same Product ID for all my retail folio since am doing monthly and yearly subscription most time. I created another type of in-app purchase, but Apple kept not approving them.
    Let me give you some load down: I initially choose Auto Renewable subscription for all my magazines and just keep using same ID for each magazine monthly, I submitted a consumable in-app purchase in the past, but Apple rejected the In-app purchase that I am doing auto-renewal, so I felt I was right by just repeating the product ID monthly.
    You have been helpful.
    I await your reply as well.

Maybe you are looking for