IDOC error - Receiver of IDoc is its own logical system

hi,
i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
for this i have created a Zreport and passed the data from application server to segment and i called the
FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
status as 29.i.e. Receiver of IDoc is its own logical system.
my logic is as follows.
MOVE 'LS' TO w_edidc-rcvprt.
MOVE 'SBECLNT130' TO w_edidc-rcvprn.
MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
MOVE 'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
pls let me know the solution for this problem.
Regards,
Balu

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

Similar Messages

ERROR B191 - IDoc has its own logical system as receiver

I everybody, i'm tryng to execute a package to charge a ODS from another ODS (Datamart) but the process ends with the error "IDoc has its own logical system as receiver", can you help me with is?
What should be the reason for this error? What can i make to solve it?
Thanks to all

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

RPM_FIN02 - Receiver of IDoc is its own logical system

For one particular portfolio item, I run the RPM program RPM_FIN02.
This results in an IDoc creation.
Next, I checked the status of the IDoc (RPM > Base System Interfaces > SAP Financial and Controlling Integration > Data Distribution From SAP FI-CO to SAP xRPM > Check Inbound Processing).
This shows the status "29 - Receiver of IDoc is its own logical system".
As a result, the Internal Order costs (including the ones posted from cProjects) do not get pulled into RPM Financial Planning.
Please advise.
I do not have the technical understanding of this issue, and would therefore need a little more than the mere technical jargons and terms to be able to resolve this.
Thanks for understanding.

Hi,
Very briefly,
-Assuming your RPM system is independent of your ECC box. But RFC connected.
-RPM_FIN02 is for pulling in financial data onto RPM item from (object linked) Internal Order(IO)/PS Project(PSP).
-RPM_FIN02 do not recognize/goto cProjects for financials.
-cProjects can have its own account assigned IO/PSP
-cProjects Dashboard, (if all is well incl. evaluation) should display costs from assigned IO/PSP
-This cost does not reach RPM item
-Source of cProjects- if it is created within cProjects or from RPM Item, does not matter.
thanks,Mathavan

Idoc Status error 29 for Out bound Idoc( Receiver of IDoc is its own logic)

I try to create the Out bound Idoc with messag type WMMBXY ( basic Idoc type - WMMBID02 ).
which is configured with the out put type XXXX in VT01N( shippment creation). But I am getting the error status 29 in the Idoc.
Only I am passing the sender, receiver port , partner type and partner function to the communication structure.
Could you please tell me , what is the issue with the partner type configuration .

Hi,
Error 29 occurs when there is an incomplete or no partner profile maintained.
Check whether you have done the correct partner profile settings in WE20 outbound parameters.
For the partner no defined in Idoc check whether there is an entry(under partner type LI, KU or LS)
with correct message type WMMBXY and Idoc type WMMBID02. Also check for message function code.
Regards,
Savitha

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Event trace error: own logical system not defined ?

Hello,
i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
Any suggestiobns on what can be the problem ?
points are awarded
Regards

Sounds like you need to setup your client as a logical system, to do so..
To do setup the Logical System follow the following steps
In IMG Settings
Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
Set up Logical System -> Maintain Logical System.
Create New Entries

JDBC to Idoc scenario - change of logical system name

Hi,
I have a JDBC to idoc scenario that worked. Now i had to change the logical system name from my sender system from ABC_123 into ABC123 in the SLD (Business System - Integration - Logical System name). I did so and also refreshed my Cache.
Afterwards I started the process, but it failed in the Receiver system. The idoc is correct expect of the partner name. My receiver system expect ABC123 - as I changed in the SLD - but PI send ABC_123.
If io look in SXI_CACHE - Services my Business System still got the "old" name (ABC_123).
Did i miss something resp. how can i load the current configuration from SLD?
Thanks in advance
Michael

Hi Michael,
Again Import the changed logical system in the Integration directory of you PI system.
And check the scenario (Sender Agreement, Receiver agreement ) what system they are reflecting.
If they are showing old system then you have to replace the business system in all the scenario.
Edited by: Rajhans Abhay on Jan 7, 2010 3:14 PM

Want to Hook up my MacBook Pro to an audio receiver and its own speaker system

Hi there. I saw this receiver on the Best Buy site, from Insignia: http://www.bestbuy.com/site/Insignia%26%23174%3B+-+200W+2.0-Ch.+Stereo+Receiver/8254612.p?id=1169512...
How would I connect my MacBook to the Receiver, to route its sound through the receiver? It seems possible, but I 'm not sure how to do it and what specific cables I need.
Any thoughts? Ideas?
Dan

I think you need one of those Y adapters. One end plugs into the laptop, and the other end , which is red and white plugs into the stereo
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

T500 shuts down on its own after system update

Hello all,
I have recently ran System Update to update some of the drivers and utilities on my T500.
After the update I suddenly noticed 2 extremely troubling side effects:
1. (this is the least troubling) I Lost all the indication for the function key operation (e.g.. Volume control, brightness control, etc...). The function keys seem to work but there is no on-screen indication
2. (and this is the most troubling) I noticed aafter leaving my computer on for a while (and leave the room) I would come back to find it turned off.
this happened in intervals of 15-120 min.
I checked the power options but everything seems to be as it was (my machine is set to "always on" regardless of power connection and I also turn off the hibernation option).
I even un-installed the lenovo power manager (it was one of the updated features) but that didn't help.
These are the items that I updated:
system migration assistant 6
ThinkPad video features (AMD switchable Graphics(M8x)) for windows 7(32/64bit)
synaptics ultranav driver for win xp, vista and win7 - WW-
ThinkPad power manager (i uninstalled this one already- no change)
ThinkVantage access connection for windows 7
Thinkpad hotkey features integration package setup
WIFI Driver for Intel cards (for windows 7 64bit)
If anyone here ever encountered such problem or knows what is causing my machine to turn itself off every once in a while I would appreciate a tip!!!
I am running windows 7 64bit and I have TPfan control installed.
Thank you all so much!!

I must say, also, that examining the list of updates in my first post, my biggest suspects are (in order of prominence):
ThinkPad video features (AMD switchable Graphics(M8x)) for windows 7(32/64bit) - this can explain the heating as well as the disappearance of the OnScreen display BUT i tried starting the computer the other day with the onboard graphic adapter and the computer still crashed. puzzling...
ThinkPad power manager- as i mentioned before, i uninstalled this one already and there was no change but it might have screwed up the definitions somewhere because the computer was (beside all other symptoms) going into sleep mode despite the fact that it was set up as "always on" and "never sleep".
WIFI Driver for Intel cards (for windows 7 64bit) - that might be a long shot but its the one thing that is always running in the background.
does this make sense?
do you have different suspects?
I am trying to share as much of my conclusions here as possible. i hope this helps.
thanks again!

SYSTEM ERROR, IDOC_ADAPTER, Unable to convert ALE to logical system

Hi,
I just wanted to check when i am using SXMB_IFR for monitoring then in message monitoring ---> if i check for Integration server as a whole i Find error as SYSTEM ERROR but if i check only for Adapter engine I get all the idocs successful.
So what we have to monitor the whole integration server or adapter engine only

saras,
When you see successful in the Adapter Engine, what it impliesis that the Adapter Engine has picked up the message ( file in your case ) and then passed it to the Integration Engine for processing ( this is where the actual pipeliining steps take place). As far the adapter Engine is concerned the message has been passed to the integration engine and so its job is done.
The error you see in Integration Server is becuase it includes the status of the messge in both the adapter Engine and the Integration Engine. You messages has errored out in the Integration Engine and so the problem!
Just rememebr this terminology --> Integration Server is the runtime of XI which in turn contains the Adapter Engine and the Integration Engine.!!
Regards,
Bhavesh

Creating Idoc and sending it to its own...

Hello All,
The functional design specified that an inbound function module needs to be created to process a custom IDOC, let's say ZMMDLRTL, and using the data from the segments from this basic type ZMMDLRTL, I need to create another IDOC of basic type PORDCR101 to create a PO. This PO IDOC would then have to be posted to the same system where the inbound function module that would process the ZMMDLRTL IDOC. So this is just like creating an IDOC and sending it to yourself right?
I used the function module MASTER_IDOC_DISTRIBUTE to create the PORDCR101 Idoc and sends it to itself. But now I am getting an error status 20, which is "Receive of IDOC is its own logical system". I just need some inputs on this.
Thanks,
Kristine

Hi!
In two words - to avoid this error you have to send PORDCR101 to another logical system pointing to the same client and make corresponding settings in distribution model (as you use MASTER_IDOC_DISTRIBUTE).
Proceed as follows:
1. Create a "dummy" logical system name, say LOGSYSD. This dummy logical system will serve as the receiver system in the distribution model.
2. Using SM59 create RFC-destination LOGSYSD for the dummy logical system. The RFC-destination addresses the same client.
3. Create a distribution view in BD64 with your "real" logical system for client as the sender and LOGSYSD as the receiver for your message type.
4. Generate partner profiles for distribution model using BD82.
5. Using WE20 create inbound parameters for your message type for <b>"real"</b> logical system.
Hope it helps.
Regards,
Maxim.

IDOC to Logical System

Hi all,
Can I send an idoc from development(301 client) system to the LOGICAL SYSTEM of the same development(301 client) system?
If I do so, i see the status as '29' i.e 'Receiver of idoc is its own logical system'..
Is there any solution to avoid the above message?
Thanks,
Faraz

Hi,
To avoid this message 'Receiver of idoc is its own logical system', you have to use a other client which is not in the DEV box.
Better use some quality Box client.
But it should work even if you use two different clients of the same box.
create separate Logical systems in two clients and do other settings also in both the clients and do.
reward if useful
regards,
Anji

Easy way to send every possible IDoc to a Logical System

Hi all,
With the help of the SAP Java Connector I'm trying to create an application that receives (and further processes) IDocs. The idea is then to walk through a process in SAP, e.g. Procure to Pay (PR, PR approval, Request for quotation, PO,...), and to receive an IDoc after each step of the process.
is there an easy way to enable the sending of all possible IDocs to a specific external Logical System (the JCo). This way the JCo can listen, identify and handle incoming IDocs, and thus reconstruct the process that was executed in SAP with the help of the IDocs.
I can already send some IDocs to my Java Connector, but setting this up for each action or process seems quite a lot of work.
Hope it's clear.
Cheers,
David

Hi,
Understand the query to establish the interface so as to send the IDocs to specific LS (Logical System) which will be connected to external system through JCo.
For Procure to Pay process, external documents (PO,Contract for e.g.) can be sent to external system through output determination process wherein settings can be made to send the output immediately (as soon as document is saved) and output conditions can be maintained per logical system (by maintaining LS as one of the partners) this will also reduce the condition records.
Further it can be achieved to deliver the output to specified folder per document/process wherein Jco will handle further process.In other words create no.of folders per process/document whichever best suits.
Regards,
Kiran

Cannot find or invalidate its owning entity.

hi when i click my createinsert am geting this error cannot find or invalidate its owning entity. am in jdeveloper 11.1.1.6.0
my log error is
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Detail entity UamOrganisationUser with row key oracle.jbo.Key[null 7601 ] cannot find or invalidate its owning entity.
oracle.jbo.InvalidOwnerException: JBO-25030: Detail entity UamOrganisationUser with row key oracle.jbo.Key[null 7601 ] cannot find or invalidate its owning entity.
     at oracle.jbo.server.EntityImpl.internalCreate(EntityImpl.java:1341)
     at oracle.jbo.server.EntityImpl.create(EntityImpl.java:1020)
     at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:1197)
     at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1152)
     at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:498)
     at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:515)
     at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:5714)
     at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1993)
     at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2492)
     at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2533)
     at oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:2514)
     at oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:11079)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1364)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:185)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:889)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:379)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
this is my association
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE Association SYSTEM "jbo_03_01.dtd">

<Association
xmlns="http://xmlns.oracle.com/bc4j"
Name="OrguserlinkOrganisationsFkAssoc"
Version="11.1.1.61.92"
InheritPersonalization="true">
<DesignTime>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<AssociationEnd
    Name="UamOrganisations"
    Cardinality="1"
    Source="true"
    Owner="model.UamOrganisations"
    LockLevel="NONE">
    <DesignTime>
      <Attr Name="_aggregation" Value="0"/>
      <Attr Name="_finderName" Value="UamOrganisations"/>
      <Attr Name="_isUpdateable" Value="true"/>
      <Attr Name="_minCardinality" Value="1"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.UamOrganisations.Organisationid"/>
    </AttrArray>
</AssociationEnd>
<AssociationEnd
    Name="UamOrganisationUser"
    Cardinality="-1"
    Owner="model.UamOrganisationUser">
    <DesignTime>
      <Attr Name="_aggregation" Value="0"/>
      <Attr Name="_finderName" Value="UamOrganisationUser"/>
      <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.UamOrganisationUser.Organisationid"/>
    </AttrArray>
</AssociationEnd>
</Association>Edited by: adf009 on 2013/03/24 1:12 AM

this is my association between parent and child
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE Association SYSTEM "jbo_03_01.dtd">

<Association
xmlns="http://xmlns.oracle.com/bc4j"
Name="OrguserlinkOrganisationsFkAssoc"
Version="11.1.1.61.92"
InheritPersonalization="true">
<DesignTime>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<AssociationEnd
    Name="UamOrganisations"
    Cardinality="1"
    Source="true"
    Owner="model.UamOrganisations"
    LockLevel="NONE">
    <DesignTime>
      <Attr Name="_aggregation" Value="0"/>
      <Attr Name="_finderName" Value="UamOrganisations"/>
      <Attr Name="_isUpdateable" Value="true"/>
      <Attr Name="_minCardinality" Value="1"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.UamOrganisations.Organisationid"/>
    </AttrArray>
</AssociationEnd>
<AssociationEnd
    Name="UamOrganisationUser"
    Cardinality="-1"
    Owner="model.UamOrganisationUser">
    <DesignTime>
      <Attr Name="_aggregation" Value="0"/>
      <Attr Name="_finderName" Value="UamOrganisationUser"/>
      <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.UamOrganisationUser.Organisationid"/>
    </AttrArray>
</AssociationEnd>
</Association>i try to folow this
http://tfathy.blogspot.com/2011/04/detail-entity-with-row-key-null-cannot.html
http://one-size-doesnt-fit-all.blogspot.com/2008/05/jbo-25030-failed-to-find-or-invalidate.html
Edited by: adf009 on 2013/03/24 1:22 AM

IDOC error - Receiver of IDoc is its own logical system

Similar Messages

Maybe you are looking for