Idoc not received in receiver , sender shows successful in WE02
Hello,
I am sending Vendor from Production to Quality , sender system shows in WE02, idoc status as sucessful. I have checked all ALE settings and they are perfectly fine.
But in receving system I am not able to receive it. In sender , transaction SM58 is showing error:
No authorization to send IDocs with message type CREMAS
Can any one suggest what is the soultion for this scenario?
Thanks,
Madhura
Hello,
Solution for above problem:
After executing transcation SM58, screen will show Function Module as IDOC_INBOUND_ASYNCHRONOUS , put cursor on FM IDOC_INBOUND_ASYNCHRONOUS
, go to EDIT->Execute LUW.
This will solve the problem of authorization.
Thanks,
Madhura
Similar Messages
-
IDOC not visible in IR but metadata successfully imported
Hi,
I have this wiered issue.
I want to import IDOC WPUSKR01 (cashier productivity) from BI.
But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
But I can manually import the metadata from BI in idx2.
Now how to import this in IR?
I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
Regards,
Anirudh Vyas.Hi,
In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
I have checked all the segments in we31, they are all released.
But it gives error:
Error: IDoc type WPUKSR01 contains errors (unable to read segments)
Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
But the same thing is failing in BI. I have SAPALL permissions in all the systems.
Can I use Idoc imported from R/3 in scenario for BI?
regards,
Anirudh. -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Outbound IDOC not received at the receiver system.
Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohithHi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes. -
Hi All,
I am using SAP MII 12.1.5 Build 87.
I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII.
We are able to send iDoc from SAP but we are not able to receive same in MII.
Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83.
Following are the log details for SAP MII Logger as well as SAP NW Log.
SAP NW Log:
Error processing JRA IDOC message
SAP MII Log:
Error processing JRA IDOC message
Error processing JRA IDOC message [server=xxx, client=xxx]
[EXCEPTION]
java.lang.NullPointerException
at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
at $Proxy943.onMessage(Unknown Source)
at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Please help me out on this issue.
Regards,
Manoj Bilthare
Edited by: Manoj Bilthare on May 19, 2010 12:57 PMHi Manoj,
Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
If this doesn't help you,please try restarting your server again.
How about the credential editor have you configured this as well?
Regards,
Sudhir Kumar
Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM -
Hi
During data loading , I got one Error that Idoc Not received.
What will be the cause of problem and How to resolve it?
Regards & Thanks
DuraiHi Robert Negro !
I checked , Dump has been there.
How can I resolve?
what will be other causes apart from the Dump?
Thanks A Lot .
Regards
Durai -
You have now exceeded your iCloud storage, including an additional amount provided to allow you to continue receiving email. As a result, you will not be able to send or receive new email messages with your iCloud email address until you free up storage space or buy more storage. I have 20GB remaining. WHat is the issue here?
Today I received the same message but have 4.6gb available from a total of 5.0gb. I also received the same message when i first set up my icloud account and icloud was virtually empty. Unfortunately the only way i can see to contact apple is to pay for a telephone call. If anyone knows what is going on i would appreciate knowing.
-
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.
Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums. -
Orders02 IDOCs not received on the EDI side
Hello SRMer's
System Information:
R/3 4.6 C
Issue related to EDI Purchase orders Pushed from R/3:
We have a situation where the Orders02 IDOCS in R/3 have status Code 3 in WE02 (data passed to port successfully) with a green light, but they are not recieved on the EDI side.
Is there any extra step that needs to be done to push these IDOCS to the EDI side.
Thanks in advance.
Points will be rewarded for answers.
Best Regards,
Bobgo to we09 and send it forcefully...and then check it.
-
My S3 will not make/receive calls or send texts.
Since a trip about 3 weeks my phone has had an issue with making/receiving calls and sending texts. It is random, won't work at home or work one day but will the next however it is getting worse. I do not have any issue with mobile data and I receive texts with no problem. Also have an issue when the phone does make a call no one can hear me...I can hear them just fine. My be a seperate issue however the microphone issue started the same time as the other issue. Any suggestions?
Rsmallfo, thanks for posting. Are you still having with your SIII? What software version are you running? Have you tried this: http://bit.ly/WJ6d0y and retested? Is there any physical or water damage to the phone? Please give more details. I would love to help.
SammuelP_VZW
VZW Support
Follow us on Twitter @VZWSupport -
Hello,
I am only a few weeks old into BizTalk so I am new to this application.
The pieces I have for my development environment consists of the following:
FTP Server ---[SFTP Adapter]---> BizTalk 2013 ---[FILE Adapter]---> Internal Network Share Drive
I currently configured a simple PassThru, One way Receive/Send in BizTalk where the Receive Port receives a file via SFTP
Adapter from our FTP server and the Send Port sends the file via the FILE Adapter to our Internal Network share drive.
The setup works great with small files. However, when I receive a large file on the FTP server, the Send Port sends multiple instances of the file on the FTP server because the Receive Adapter sees that the file is there, but not yet
fully uploaded.
Can someone please guide me as to how I can determine when a file is fully uploaded to the FTP server before the Receive Adapter fires?
Thanks,
MitchYap BizTalk does not have control over locking the file during read/write Operation and its the third party which need to take care of this (by rename the file after upload ) .
If the file size is too large I would suggest to bypass the message box as it has performance bottleneck during peak hours
Apart from being repetitive, this is not good advice. There is no indication that the file is too large or will cause any "performance" issues.
The concurrency problem can happen with a file of any size. -
I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.
<P>
Do the following steps:<BR>
<P>
<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>
<P>
Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.
<P>
For more information, please see the document <I>Messaging Server
Administrator's Guide</I>, Chapter 3, Configuring SMTP Services at <BR>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below. -
I am trying to set up my emails - and when I sent a test it went to my old IPhone - when I re put all the information into my new phone it says This account may not be able to send or receive emails do you want to save.
What am I doing wrong?Good morning to all.
Well I spent many hours last night trying to get my Mail going on my iPad. I phoned Yahoo. After listening music for 3/4 of hour, they gave me so called advise, which I had already tried 25 times. I exchanged emails with Apple support team. They said I did not have support arrangement, so they could not help me unless I buy one time support that costs $30.
I can do emailing through Safari, but It is not up to current standard after I am so used to using "Mail" feature on iPad.
I am now in a desperation state, so I am thinking to buy one time support from Apple.
Just so someone might be thinking about Downloading Yahoo app for Mail, you should know it would not help me because my iPad iSO is 5.1.1. It has to be iSO 6.0 or higher. So I thought rather than spending $30 on one time support from Apple, I just trade in my iPad to get newer iPad.
Is there anyone out there who might save me $30? Thank you everyone for thinking about my problem. BcCanip -
Not able to receive email but able to send
I am not able to receive my emails, but I am able to send? Comcast said all my settings were correct and I am able to view my email if I go and log into my comcast acct.?
Mail: Troubleshooting sending & receiving email messages
Maybe you are looking for
-
Migrate CRM opportunities from version 5.0 to CRM 7.0 CRM
Hi How can we migrate all the CRM Opportunities from CRM 5.0 to CRM 7.0? Regards, Winston
-
Add Column names as Header Line
Hi All I am tring to do a FILE to File scenario ,At Receiver end i am usin FCC to generate text flle.How to get the header names in the generated text file like FIELD1 FIELD2 FIELD3 abc 12 34 def 13 35 pqr 14 36 m
-
Fontbook fonts not syncing with my software programs-after SuitCase Fusion Trial
I am hoping someone can offer some insight / help. I am frantic .....a graphic designer needing my fonts asap!! TRIGGER/ Problem arose today -- I installed and then uninstalled a trial version of Suitcase Fusion 3 today - and now 1/2 of my fonts are
-
HT201077 Photo stream group not showing up
I was invited to a photo stream and I clicked join, but when the link takes me to my photo streams that stream does not show up no matter how long I wait
-
Dbms_advanced_rewrite to return a new date
Is there a way to offset the database date by a given amount of months/days/years so that when the sysdate is queried, it returns a date which equals the current date+the offset? This has to be done without changing the server's OS date. I'm trying