IDOC to be triggerd when delivery is being deleted

Hi IDOC Gurus:
I want an IDOC to be triggered when we deleting the delviery. I don't know where exactly i have call my rouintes.
When saving the delivery the VOFM routine is being called, it is 903.    However when deleting the delivery it is entering into the userexit ,  'userexit_delete' and it is not enetring into any VOFM routines i.e. it is not enteirng into routine 903.
Here VOFM routine are being written to detrmine whether the order is being interfaced to other system or not.
Kindy advise me where exectly i have to call my routine when delviery is being deleted.
Thanks in advance.
Regards
Harikrishna

Thanks, ALL..
There were 2 issues:
1. Access sequence in NACE
2. The SAPscript wsa assigned to wrong place.
This is now rectified.
Quetion on the same lines (hence, on the same thread)
1. Sales order type ZA- Delivery type- LF- Billing type F2.
In the above case, we dont want the delivery document to be printed.
2. Sales order type ZB- Delivery type- LF- Billing type- F2
In this case, only when the sales order is created as ZB (this creates an immediate delivery and there is billing block, thats the difference between ZA & ZB order types.
VV21 can be maintained with either of the below (I mean- we are flexible here)
Shpping point
Delivery type/shipping point
Sales organization
Sales Org/Delivery type
Only in the above case, the delivery document should be printed automnatically.
Is it possible to attain this keeping the delivery type as LF (standard itself)?
Appreciate your earliest response.
Regards,
Shilpa

Similar Messages

  • Trigger IDoc when outbound documents are deleted

    Hi Experts,
    I am working on a scenario where in when delivery document is deleted then we need to have a IDoc to be triggered and sent to the receiver.
    I understand that when we create/change delivery, there is a way to trigger IDoc (i.e., through message control). But when we delete a delivery, I am not sure, we have standard mechanism to trigger an IDoc. Can we have a standard way of making this happen?
    Thanks & Regards,
    Suraj Kumar

    Hi,
    In the NACE transaction, Click on the APPLICATION V2 and create a new OUTPUT type with Z as prefix
    In the Processing Routine Tab in the control data enter the MEDIUM as  6 which is the  EDI and  maintain the PROGRAM & SMARTFORM as developed by the ABAPer
    Now maintain the CONDITION RECORDS with the MEDIUM 6  and the LS as Partner function
    Now with the Help of your ABAPer, define  the PARTNER PROFILES in WE20 and the Message types .
    This will trigger the OUTBOUND idoc to the other system.
    Please check these settings and revert back if you need more details
    regars,
    santosh

  • Trigger TPSDLS01 IDoc to external TPS when outbound delivery is deleted

    Hi,
    We are currently trying to find a solution how to trigger a TPSDLS01 IDoc to external TPS when the outbound delivery is deleted.
    In the following SAP article: Logical Communication Processes Between the SAP System and the T - Supply Chain Planning Interfaces (LO-SCI) - SAP Libra… it is said that "...If a delivery is deleted in the SAP system, this deletion command is transferred automatically to all transportation planning systems...". and we're trying to understand how it actually should be configured?
    Any advice would be much appreciated.
    Thanks!

    Hi,
    I know this is quite old now....but, did you ever find an answer to this problem?
    SR

  • Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too

    Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
    a. User trying to create delivery but stock not available.
    b. When stock is not there it should show an error message in SAP screen but its not -  like stock not available etc
    c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
    d. But issue its creating even its less than zero
    Is there anyone who can help me out...

    When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
    Any suggestions !!!

  • Delivery quantity changed while delivery was being picked .

    Hi Friends .
    I have  a big problem, because the delivery quantity changes while the delivery was being picked.
    This is the positively the 3rd time that we have seen this, possibly the 4th, recently.
    Delivery was created this morning for 800pc. Batch determination was telling the picker to pick from perticular storage location SLOC 112. (all 800pc) (25pc =1 pallet)
    The picker knew that he was picking 32 pallets from that row.
    After he picked 32 pallets, the system was telling him that he needed to pick 2 more pallets.
    At that point, I  saw delivery .The quantity in the delivery had, at this point, increased to 850.
    Delivery shows that 32 pallets that had been picked up to this point.
    again  it is calling to pick 2 more pallets.
    at this point of time  delivery is for 850 (not the original 800)
    I have not changed the quantity in delivery or in order . how come delivery quantity has changed while materials are being picked .
    Kindly I request your speedy reply as it's priority ticket .
    Thanks in advance .
    Jayapala S.h

    Hi jayapala
    The delivery qty can change while you pick the quantity  if the stock is less than the stock that is to be actually you are going to deliver. As the stock is changing , check the stock in MMBE for that material.
    Example :
    Say you have created a sales order for 100pcs but when you are doing delivery material is taking only 75pcs because there are only  75pcs of stock in the storage location
    Regards
    Srinath

  • IDOC number related to the delivery

    Hi All,
    I have issue regarding finding out IDOC related to a delivery.
    When the output is processed for a delivery, idoc gets created. Now this idoc number gets stored in the EDIDC table. In delivery one can get the related idoc number by checking the processing logs for the output type.
    Is there any specific FM which can give me the idoc number of the latest processed output type for that delivery. I have delivery number and output type.
    Thanking in advance.
    Regards,
    Shahu

    Hi..
    I think need to add further to my question.
    I have an interface progra in which I am sending IDOC details related to the delivery.
    Now in this interface program, I have delivery no and the processed output type. Using this how can get the IDOC no. I cannot go to EDIDC to get the idoc no as it will be performance intensive or to any transaction. I need to code here to somehow get the idoc number using this delivery and output type.
    I am trying the following approach but could not implement it so far.
    In delivery is I go to header>output>check the processed output type -->processing log --> the idoc number  will be present in this log.
    I am trying to code in the interface program to read this idoc number present in processing log.
    Is there any way I can achive this.
    regards,
    Shahu
    Regards,
    Shahu

  • Orientation is wrong when delivery note, pick ticket are printed together!

    Hi All,
    I am facing this peculiar problem.
    When delivery notes and pick ticket both are printed at the same time from VL02N, then the pick ticket is being printed in portrait instead of landscape.
    The delivery note should print as portrait and pick ticket should print as landscape.But these when printed together from VL02N transaction, the second one pick list is printed as Portrait rather than Landscape.
    The spool is generating correctly (DELIVERY NOTE as PORTRAIT and PICK LIST as LANDSCAPE) but when passed to printer both are printing in PORTRAIT format.
    The printer settings are same in PRODUCTION as well as QA.In Production system it is working fine but the same settings are there in QA behaving differently.
    The printer model we are using is HP Laserjet 4350.
    Please advice.
    Regards,
    Pratyusha
    Edited by: pratyushasdn on Jul 12, 2010 4:59 PM
    Edited by: pratyushasdn on Jul 13, 2010 7:26 AM

    Dear Pratyusha,
    Kindly chck on the production and quality system version of the form. The landscape/ potrait option is passed on to the smartform and should be independent of the driver program / Tcode. Kindly chck on it again and revert

  • Nace config for DESADV type Outbound IDOC of type 856 at Delivery level

    Hi All,
    My requirment is to trigger Outbound IDOC of type 856 at delivery level & not at shippment level & one line per ASN.
    How can I configure this in NACE?
    Thanks in Advance.

    Hi Raj,
    For example, you can use the ASN0 output condition as a SAP standard. please go to NACE t-code and select the V2 for shipping and
    go into the ASN0 output type configuration. in the that sceen;
    1)give access sequence regarding of your requirment,  for general data.
    2)in the default values tab, Dispatch time can be 4= send immediately (when saving the application),  transmission medium should be A Distribution (ALE) and partne function SH.
    3 go in to the processing routines for the output type and Programcan be configured as RSNASTED, Form Routine as ALE_PROCESSING. But these are SAP Standard and they are changing your requirements with the ABAP tricks.
    After the output type configuration, go in to the output condition from nace t-code same. And create condition for ASN0 output type. when creating your conditions regarding of your acces sequence, you should  Dispatch time can be 4= send immediately (when saving the application),  transmission medium should be A Distribution (ALE) and partne function SH like output type configuration,too.
    I hope these will very useful to meet your requirements. But additionally, you should also contact with a ABAPER for the program and routines.
    Regards,

  • My itunes account was set up under an email account that has been deleted. I started a new itunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted when i sync it to my new account?

    My itunes account was set up under an email account that has been deleted. I started a new i tunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted whin i sync it to itunes after purchasing new music?

    I have the same problem (deleted email account). I think I mistakenly set up an account when I was buying an Apple product online, not realizing that it would be the same ID as my iTunes.
    What is the way to actually contact Apple?
    I have been clicking around in circles for hours! Will I have to pay them to resolve this? I don't have any products still have applecare . . .

  • HT201317 The pictures in my photostream folder on my computer are being deleted when the pictures are deleted from photostream on individual devices.  The photos on the computer were supposed to be permanent.  Can I stop photostream from deleting from my

    The original photstream instructions, and the current photostream information page on the apple website, say that photos on your pc or mac computer that have been synced by photostream are permanent but the latest updatge seems to have changed that so when items are deleted from any device they are deleted from all devices, including images that have gotten older and have rolled out of photostream on my iphone.  I trusted photostream to save these images on my computer and now they appear to be gone.  Can I turn off the option of deleting photostream images from my computer or do I need to copy these images to another folder to save them from being deleted when they are deleted from the device.

    MikeMurdock wrote:
    ok so i can't figure this out because i keep being told different things by everybody.
    so say I take a picture with my phone. that picture is now located in my camera roll and uploads to my iclouds photostream, which I can then view on my computer. now my question is this: is the photos in my stream, on my comp permanent, allowing me to then delete them from my phones camera roll?
    No
    Photostream keeps them for 30 days.

  • 0 down vote favorite share [fb] share [tw]        How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard.  Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

    How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
    Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
    I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
    Any clues will help a lot.
    Thanks.

    You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

  • Error Message when Delivery Note is created

    HI ALL,
              "Quantity falls into negative inventory" error message appears when Delivery Note is created from Sale Orders in SAP B1  system.
              Pls, solve my problem,
             Thanks u so much.
    kyimoh
    Best Regards

    hi kyimoh
    Please check  Your Item  In Stock Quantity status. If your quantity less then ur Delivery quantity. So You have to increase your item In Stock Quantity.
    Thanks
    Khan Imran

  • How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

    How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

    Have you seen this?
    Using a POP account with more than one device - Apple Support
    A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
    If they do not your choices are to 1) configure email on the PC to keep Mail on the mail server or 2) change email providers to something like Gmail or Outlook.com (as examples). FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.

  • Inbound IDoc MBGMCR02 Goods receipt for delivery status 51 Reference Docume

    Hello IDoc experts,
    I try to do a goods receipt for an inbound delivery using inbound IDOC MBGMCR02.
    The inbound delivery is linked to only one PO, and the bill of lading number in the delivery is unique.
    Still I get the following error message:
    Reference Document Number is existing at more then one Purchase Order!
    The inbound delivery is linked to only one PO, and the bill of lading number is unique
    These are the fields I fill:
    E1EBP2017_GM_HEAD01
            PSTNG_DATE:  '20100421
            DOC_DATE:   '20100421'
            REF_DOC_NO: 180000008 (number of the inbound delivery)
            BILL_OF_LADING: 4500001992 (I have put the PO number in the bill of lading number in the delivery)
    E1EBP2017_GM_ITEM_CREATE
            MATERIAL: CH0463COEUR\1 (material number of the first item of the delivery)
            PLANT: ST01
            STGE_LOC: 0001
            MOVE_TYPE: 101
            VENDOR: 100080
            ENTRY_QNT: 100
            ENTRY_UOM: PCE
            ENTRY_UOM_ISO: PCE
            PO_PR_QNT: 100
            ORDERPR_UN: PCE
            ORDERPR_UN_ISO: PCE
            PO_NUMBER: 4500001992
    E1EBP2017_GM_ITEM_CREATE1
            DELIV_NUMB: 180000008
            DELIV_ITEM: 10
    Do you guys have any idea where I go wrong?
    Kind regards,
    Rudy Zijp

    I hope you filled the moment typ indicatior E1BP2017_GM_ITEM_CREATE.MVT_IND to 'B'.
    and E1BP2017_GM_CODE-GM_CODE  to '01 and for Bill of lading field also pass delivery nymber.
    please try with these inputs.
    Regrds,
    Suresh
    Edited by: Suresh Reddy Avutu on Apr 29, 2010 4:40 PM

  • Re: Satellite L500 - Crackling noise when audio is being reproduced

    Hi all,
    I bought a L500 a few weeks ago (Windows 7 64bit). Everything goes fine except for the sound. 1h or so after turning on the computer, the speakers start to produce a "crackling", "metallic" noise when audio is being reproduced, irrespective of the source (CDs, system sounds, movies, mp3 files...). It's just like there were hundreds of "micro-interruptions". The same with earphones. This seems also to affect any multimedia files, e.g. videos 10 min length take 12 min or so to play due to these micro-interruptions. The sound goes worse with the time and gets normal once the system is restarted, but some minutes later the noise comes again.
    I've all the last Toshiba driver updates, including BIOS, LAN and sound cards, etc.
    What can I do? Any clue will be welcome.
    Many thanks in advance.

    hello,
    first thing i would try is to replace the driver from toshiba with the Microsoft driver, I personally dont use any of toshiba's drivers due to branding i dislike, however this to one side I run Windows 7 64 Home Prem, the sound cards (typically realtek) all have Microsoft drivers available, they work with no problem for me.
    If its deferntly not a driver issue and you have the same problem with headphones as well as the laptops speakers then its a problem with the soundcard itsself.
    Is your laptop still under warranty? hopfully if its hardware its still under warranty. Give toshiba a call, they should pick the laptop up and get it repaired for you solong as you did not get it from somwere like P.C World, AOL etc, if you got it from one of them stores then you need phone or take it to the tekguys.
    If you need a step-by-step for using microsofts drivers just reply saying so and i;ll sort that for you :)
    cheers
    Phil

Maybe you are looking for