IDOC to create service notification

Hi All,
I have a new task here to create service notification through IDOC.
I've done some research on the IDOC type (SERVICENOTIFICATION_CREATEFR01) , the message type (SERVICENOTIFICATION_CREATEFROM), process code (BAPI) and the FM tied to this process code (BAPI_IDOC_INPUT1).
I do found the FM that going to be called in this BAPI_IDOC_INPUT1 is IDOC_INPUT_SERVNOT_CREATE which will read data in segments and pass into BAPI_SERVNOT_CREATE to create the notification.
My problem is, I've tried to pass in some data in BAPI_SERVNOT_CREATE (as I'm not sure what is the mandatory field in this BAPI in order to create notification.
I passed in the NOTIF_TYP, NOTIFHEADER-EQUIPMENT and TASK_DETERMINATION. I tested this BAPI in sequence and the next FM to call is BAPI_SERVNOT_SAVE.
The result: Failed.
Can I know what is the mandatory field for this BAPI in order to successfully creating the notification?
p/s: I read the documentation for this BAPI too but clueless.
Thanks for the help.
Best Regards,
Jason

Hi Harris,
Thanks for the advice. After I used this BAPI to see what's the details in it, I tried to put in as much data as possible in the BAPI but without the external_number and task_determination marked as X.
In the export parameters I get in NOTIFHEADER_EXPORT-NOTIF_NO I have this 00000000002.
In the next BAPI to be called is BAPI_SERVNOT_SAVE, it requires to key in the NUMBER as the import parameters. Else, I won't be able to proceed.
I key-ed in 00000000002 into the NUMBER field and obviously it was wrong....
Please help....
Thanks a lot.

Similar Messages

Steps to create Service Notification in Customer Service Module

Hi,
Can anyone let me know the steps involved and the process to create Service Notification in Customer Service Module.
Regards,
Ram

Hello SAP Guru's,
I am Shankar from chennai.
At present i have assigned to do the Customer Service process for our project.
I had tried the BPP method for doing it.
When i tried the Depot repair process from BPP i got error during billing process.
Can any one guide me with the step by steps procedure to do the senerio.
i searched the web for the process. but i couldnt able to find it.
If any one has the complete step by step procedure to do the process pls help me.
my id is ponshankar gmail com.
Thanks in advance
Warm regards,
Shankar

Problem in customer address while creating service notification using IW51

Hi Experts,
I am trying to create a BDC recording for creating Service Notification using transaction IW51. I have done the recording as follows. On the First screen I am entering notification type. Then on the next screen I am entering the Sold to party and its address by clicking on the icon besides it. After that i enter Functional location, equipment, priority and req end date and save it. When I am running this recording after transferring it to a progam , somehow the address disappears for the newly created notification. I am not able to figure out the reason. Kindly guide me.
Thanks,
Sonal

I assume you have tried this with update mode = 'A'-all and watched it actually work correctly? May I ask why the BDC instead of BAPI? Is it because you're creating a new partner? If so, are you pressing save on that partner creation?

Problem while attaching file to create service notification(IW51) iView

Hi,
We are using Create Service Notification (IW51) transaction iView (SAP GUI for HTML) in one of our portal workset.
Few users are facing issue while trying to attach file to the Service Notification. When they open the file dialogue to attach the file
it keeps on spinning and hangs, nothing proceeds further. Does anyone faced similar issue if so can you provide solution for this?
Regards,
Abhiram.

Hi,
Check the users experiencing issues java runtime on their systems. The file system object uses the JRE. Also check that if the java runtime is up-to-date and of teh same version whose systems are working, that their browser security setting as well as trusted sites have been configured correctly.

Unable to attach file to create service notification(IW51) transactio iView

Hi,
We are using Create Service Notification (IW51) transaction iView (SAP GUI for HTML) in one of our portal workset.
Few users are facing issue while trying to attach file to the Service Notification. When they open the file dialogue to attach the file
it keeps on spinning and hangs, nothing proceeds further. Does anyone faced similar issue if so can you provide solution for this?
Regards,
Abhiram.

<< Do not post the same question across a number of forums >>

Any Function module/BAPI to create Service Notification wrf to Contract

Hi Experts,
Is there any BAPI/FM to create service notification with reference to Contract.
Thanks & Regards,
Vishnu Priya

.

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

Creation of Service Notification and filling certain fields

Hi,
I am trying to create a service notification document from inside dunning activity (TR FBVB).
The steps that I followed are
A custom FM is configured which is called after dunning event ISU_DUNNING_BLOCK_DEVICE_0350. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE. This FM creates the relevant service notification document for the disconnection order.
The problem we face in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
Our requirement is to have the service notification created via the above fields populated in it.
Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53)
Regards,
Imran

hi eshwar
you can create service order by using the service notification,
create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you want to create
hope this will clear you
regards
thyagarajan

Creation of Service Notification No for SO.

Hi everyone,
I am working on the User Exit for the first time. Kindly help me out with the following requirement.
When a sales order is saved, create a service notification and link to the sales order header.
To fulfill this requirement we need to use the following:
Program SAPMV45A, Include MV45AFZZ, USEREXIT_SAVE_DOCUMENT
BAPI to create service Notification is : BAPI_ALM_NOTIF_CREATE
When the service notification is created, the following fields should be populated in the notification as the end result:
1.     Sales Organization (VIQMEL-VKORG)
2.     Distribution Channel (VIQMEL-VTWEG)
3.     Division (VIQMEL-SPART)
4.     Sales office (VIQMEL-VKBUR)
5.     Sales Group (VIQMEL-VKGRP)
6.     Notification short text should contain the sales order number (VIQMEL-QMTXT)
7.     Sales Order (VIQMEL-VBELN)
The following fields should be updated in the sales order as the end result:
1. Notification number (VBAK-QMNUM)
I need to check if notification no. needs to be created or not. Also, the notification type should be valid. If not I need to throw a warning mess. but SO no. should be saved. if the condition is satisfied then BAPI should be called and notification no. should be created.
In case if BAPI fails then handling should be done with the help of the transaction SLG1.
Please provide me technical help.
Regards,
Ayushi

Hi Ayushi,
In the Include MV45AFZZ you need to write you code.
First check for whcih service notification. I mean Notification Type.
Then use you BAPI if it is correct for the notification type.
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
       EXPORTING
            notif_type         = p_header-tables-mnmisc-notif_type
            notifheader        = p_header-tables-mnhead
            task_determination = p_header-tables-task_determination
            orderid            = p_header-tables-mnmisc-orderid
       IMPORTING
            notifheader_export = l_head
       TABLES
            notitem            = l_it_item         " Since you dont have any items to create leave it blank.
            notifcaus          = l_it_caus      " Since you dont have any causes to create leave it blank.
            notifactv          = l_it_act          " Since you dont have any activities to create leave it blank.
            notiftask          = l_it_task         " Since you dont have any tasks to create leave it blank.
            notifpartnr        = l_it_part       "etc ditto
            longtexts          = l_it_text
            return             = l_it_return.
read table it_return index 1 / read table it_return TYPE = 'S'
if sy-subrc = 0.
lv_notNumber = MESSAGE_V1 / MESSAGE_V2 .
message 'Notification created' with lv_notnumber type 'S'.
endif.
The above logic is a Psuedo or a hint only. Hope this helps.
Thanks & regards,
Bhargav.
Finally in the user exit give the message

How to block a material that not to creation of service notification thru-IW51

Hi All,
I have tried in all over areas ( MM02 level and MM06 level ) to block a material that not to create service notification with that material but didn't get a solution.If any one knows solution for this kindly provide me.
"How to block a material that not to create a service notifcation thru IW51?"
Best Regards,
Narendra Konnipati

Narendra,
1. I do not see any possibility without using this exit. It is a very simple and effective thing for your ABAPer and you too.
2. In case of many Materials-Notification type combinations, you can maintain similar code by joining several elseif s.
3. Alternatively, you can maintain a Z Table as under:
QMART
MATNR
S3
10000000099999
S3
10000000099988
S1
10000000088988
S2
12000000088988
Means, for every Notification type there will be one or more prohibited materials. The coding will not be difficult, but will have around 15/20 lines.Finally, if you have to get your issue resolved, I feel this is the way and also easy way through your ABAPer.
Tell me in case of any further opinions.
Best of Luck
KJogeswaraRao

BAPI to update ALNZN while creation of Service Notification

Hi Folks,
I want to update ALNZN ( condition after malfunction in system condition tab of IW22/IW52) using BAPI/FM while NOTIFICATION CREATION.
I tried with most bapi's mentioned below but all of these dont have field for system condition tab.
BAPI_SERVICENOTIFICAT_CREATE.
ALM_PM_NOTIFICATION_CREATE
BAPI_ALM_NOTIF_CREATE
BAPI_ISUSM_NOTIF_CREATEMULTIPLE
BAPI_QNOTIFCAT_CREATE
BAPI_SERVNOT_CREATE
BAPI_QUALNOT_CREATE
IWON_NOTIFICATION_CREATE
Please suggest standard method to create service notif along with QMEL-ALNZN
And also we need to update existing notif with same field, please suggest for NOTIFICATION UPDATE functionality as well
Thanks,
Mozila

Not possible with BAPI.
Use BDC or direct update on QMIH table

Function module for creation of service notification in R/3

hi,
Can anyone plz tell me is there any function module available in CRM that will create service notification in R/3??

Hi Anirban,
Use the bapi BAPI_BUSPROCESSND_CREATEMULTI to achieve the same.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra

Creation of service order and service notification

Hi guys,
Please any one help me how to create service order through service notification, and explain me the process.This is very urgent for me kindly help the same.
Reg
Eswar
[email protected]

hi eshwar
you can create service order by using the service notification,
create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you want to create
hope this will clear you
regards
thyagarajan

Equipments in Service notification

Dear Fnds,
While iam creating Service notification i can enter only one Equipment ...but i want to enter more than one Equipment in Service notification.
We are selling multiple Products lets say X and Y..
If 2 product come for service at a time....so need to enter 2 Equipemt in one service notification.
Thanks in Advance
Regards
raj.

Dear Fnds,
But in my case i need to maintain the 2 or more Products in a single Service notification.
Lets say iam manufacturing Laptops and Mobiles..
In Laptops i have around 100 products and in Mobiles i have around 100 products.
some time iam getting Laptop-123 and laptop-0099
I need to book the notification as two equpments.
Thanks in advance
regards
raj.

Object type for service notification?

Hi guys,
In workflow what is the object type to create service notification (IW51). How can I find it?
thanks in advance.
Regards

The object type for service notifications is BUS2080. You can find it via transaction SWO1 - use the search help on the Object/Interface field. You can also use the Business object repository (Browser) button on SWO1.

IDOC to create service notification

Similar Messages

Maybe you are looking for