Idocs used in WM module

can anyone suggest IDOCs normally used in WM module

Hi,
These are the common IDocs ...
- Message type WMMBXY with IDoc type WMMBID02 for goods movement.
- Message type DESADV with IDoc type DELVRY03 for delivery shipping.
Also check this link for more information.
http://help.sap.com/saphelp_46c/helpdata/en/52/16ac57543311d1891c0000e8322f96/content.htm
Regards,
Ferry Lianto

Similar Messages

Idocs Used in SD module

Friends,
SAP has to receive the following data from Oracle Financials. XI is the interface. So I need to identify the idocs used in SD module.
Can any one help me what idoc / bapi should i use for the below inbound processes.
Customer Credit Limit
Customer credit/debit note - Shall I use INVOIC02 Idoc for this purpose?
Customer Payments
Rebate settlements
Any input is highly thanked
Regards
Raj

Hi there,
Pls go to WE20 --> Logical systems. Select any logical systems that are setup in your company. Press F4 in the inbound parameters. You will see what are the message types that are available by standard & customized.
Select the required 1.
Regards,
Sivanand

Unable to generate IDOCS using IDOC_INPUT_ORDERS Function Module

Hi,
I have written a program to post IDOCS using function module IDOC_INPUT_ORDERS .
In the debugging mode,I found that after the call of this function-module,sy-subrc is set to zero which means that this function-module is getting successfully executed.
But when I go to WE02 transaction code , i do not see any IDOCS being generated for IDOC Type ORDERS05 .
Please could someone help me out with this .
Regards,
Sushanth H.S.

hi
check your ALE configuration:
go thru the links:
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
reward points for useful ans
Regards
Aarti

Inconsistent Errors when processing IDocs using custom Function Module

I am encountering a most perplexing error. Here is the situation.
We have a custom function module to update data in the EH&S system. We are having a bizarre error occurring. This is the basic processing of the function module:
1. IDoc data is read and loaded into an internal table.
2. Data is run through a series of checks to determine if the data is valid for entry into the system.
3. After validation we use function module C1F2_SUBSTANCES_READ_WITH_REF to read characteristic data for the substance. This data is used to validate whether current data exists to allow for loading of the IDoc data. (This is the step where the IDoc is receiving an error even if the data is valid. This only occurs if we are processing a large amount of Idocs and one IDoc contains valid data and another invalid data for the same substance. It occurs even if the Idocs are not processed in sequence. If individually processed or reprocessed after initial failure they pass. This is what is so confusing!) If it exists, a flag is set and the data is loaded using function module BAPI_BUS1077_CHANGE to modify the data.
4. If the flag is set to allow further processing, the function module C1F2_SUBSTANCES_READ_WITH_REF is used again to select different characteristic data for the substance. A similar validation process occurs and if it passes, data is loaded using BAPI_BUS1077_CHANGE to update and BAPI_BUS1077_CREATE to create new data.
Here is the situation:
When processing one valid record for one substance, the record loads successfully. When processing multiple valid records (all are valid) for one substance, they all load successfully. The problem occurs when attempting to load valid and invalid records for the same substance. Some times the program successfully loads the valid data (as expected). Other times, it will not load any records. It is not consistent!
The order of IDoc processing does not have an impact on the success of the load. Whether the valid or invalid record processes first does not have an impact on the success of the valid substance load.
Does anyone have ANY Idea of what is going on? I am clearing all fields in the function module before processing occurs. I cannot find what is causing the error to occur.
HELP!
Jim Hardy

I have some further information. It seems that if data for a substance is sent in two separate Idocs, one with valid and one with invalid data, As long as the two IDocs are processed consecutively, they process correctly. If they are separated by IDocs containing other substance information, they fail.
thanks
Jim

Error in CC while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module

Hi,
We are getting an error in CC monitoring while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module for converting IDoc XML to flat file. Below is the error text:
"Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZDELVRY3>: state=READING_FIELD_VALUE_TAG, charPosition=7404, lineNumber=2, columnNumber=7366"
Any suggestion how to resolve it.
Regards
Pravesh

Please check the OSS note below and install the mentioned patch accordingly:
[Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
If it persists, check if are there any mapping errors on the Audit Logs for the failed message.

Issue In Posting Proof Of Delivery Using Idoc using Message Type STPPOD

Hi ,
(The details I have attached in the below file.)
We are trying to perform proof of delivery with respect to a outbound delivery via IDOC using idoc inbound function module IDOC_INPUT_STPPOD.
Everything is working fine except when it is creating a new stock movement document on confirmation of proof of delivery, the newly created stock movement document is not reflecting the actual received quantity instead it is showing the the Actual Delivery quantity.
For clicking on the button - "Proof of Delivery Confirmation " (green wright symbol) and change the overall POD status as completed ( depending on this status C the stock movement document gets created) we did a custom coding in the customer exit of IDOC_INPUT_STPPOD.
The details I have attached in the below file.
I am not able to understand where I am making mistake due to which, the quantity on the stock movement document after proof of delivery confirmation is not reflecting the actual received quantity.
Can you please suggest what necessary coding changes I need to perform to make it work properly.
Regards
Saifur Rahaman

Hi Thripura,
In DELVRY03 Idoc type,there is a segment E1EDL37 containing Shipment Header Information.As a header segment,there are 6 segments under this,which contains other details.Please see the below details.
E1EDL37                        Shipping unit header
    E1EDL39                        Control segment for shipping units
    E1EDL38                        Shipping unit header descriptions
    E1EDL49                        Express Delivery Company's Tracking Connection Data
        E1EDL50                        Express Delivery Company - Additional Data
    E1EDL44                        IDoc: Shipping unit item (delivery)
        E1EDL46                        Serial Numbers HU
Regards,
VSN

Inbound IDOC using XML

Hi,
I need to create an Inbound IDOC using Function modules using an XML file as Input.
I am using mySAP ERP 2004(WAS 6.4).
IDOC type : HRMD_A05
Message Type : HRMD.
I am using the FM's in an ABAP report for testing, reading the data from the XML File using the FM GUI_UPLOAD .
I tried using the FM IDOC_INBOUND_XML_VIA_HTTP,with import parameters XML_STREAM, CONTENT_LENGTH, CONTENT_TYPE, REMOTE_ADDR.(ALL Type Strings)
This FM creates the IDOC successfully but i do not get the status record for the IDOC as there are no export parameters or tables where i can get the value.
I am trying using the FM IDOC_INBOUND_XML_SOAP_HTTP,with import Parameters as XML_STREAM type XSTRING,and there is the export parameter ASSIGN ,type IDOC_ASSIGN_TAB and i was wondering if this could return the status.
I used the same XML and used the FM "SCMS_STRING_TO_XSTRING", to convert the file input string into XSTRING.
On executing this i get the exception,"NO DATA RECEIVED" .
Can anybody Please Tell me
1)How to get the status of an IDOC if i use the FM IDOC_INBOUND_XML_VIA_HTTP ?
2)How to use the FM IDOC_INBOUND_XML_SOAP_HTTP ?
3)Is there any other way to create an IDOC with XML input?
Thanks,
regards,
Siddhartha Jain

HI Nagarajan,
I had checked the first link mentioned by you and activated the required service from Transacttion SICF,but still it didn't help.
The second link points to the IDOC Adaptor for XI,guess it won't help as i'm not using XI.
I want to pass XML data read from file and call a FM which creates and posts and IDOC into R/3 and returns the IDOC Number and Status.
For this i found the FM's IDOC_INBOUND_XML_SOAP_HTTP and IDOC_INBOUND_XML_VIA_HTTP.
The FM IDOC_INBOUND_XML_VIA_HTTP accepts xml as string and posts IDOC succesully,but i do not get the status and IDOC Number.
The IDOC_INBOUND_XML_SOAP_HTTP accepts xml as xstring,so i used the FM SCMS_STRING_TO_XSTRING to convert the same xml string to xstring and pass it to the FM.But it gives an error 'NO DATA RECEIVED'.
If i make few changes to the XML doc,to include SOAP envelope ,like
<?xml version="1.0" encoding="UTF-8"?><HRMD_A05>.......</HRMD_A05>
to
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><IDOC BEGIN="1">.......</IDOC></soap-env:Body></soap-env:Envelope>
I get the error,the tag <IDOC BEGIN="1"> not found ,the IDOC XML should be of format <IDOC BEGIN="1"> <IDOC>.
Can anybody please help on what to do/how to proceed.
Thanks,
Regards,
Siddhartha

Automate flat IDOC to XML IDOC using one interface

Hello all,
We are currently going through a migration process where XI will be replacing a legacy system. As part of our testing procedure, we are using historical data pairings from the legacy system and using an automated tool to compare if the interfaces we develop in XI match. The catch is we need the data that we are comparing in XML format for the automated tool to be able to do the comparison, and unfortunately the legacy data is a flat format. So now I would like to automate a way to convert this data to XML format.
Specifically for IDOCs, I would like to have an interface which picks up the flat files, transforms them to XML, and then drops them back into another file directory in the XML format. It would need to be able to pick up any kind of IDOC (given that XI has the metadata already imported), recognize what message type it is, then do the conversion.
I have been reading on SDN and found that there is a standard tool to do the conversion, but it appears it can only handle one kind of IDOC at a time, and it appears it only picks up one specifically named file at a time.
Has anybody tried to implement a scenario like this? Any help is appreciated (A walkthrough would be the best!).
Thanks in advance,
Mike

Mike,
What version of PI will you be using? PI 7.11 can now auto-convert Flat File IDocs to XML IDoc and vice versa.
Here is the documentation:
http://help.sap.com/saphelp_nwpi711/helpdata/en/b5/bd93642dd3410f90ebea702399fac4/frameset.htm (flat to XML)
http://help.sap.com/saphelp_nwpi711/helpdata/en/74/a45bc07e2043fb9b63295229178903/frameset.htm (XML to flat)
I have not tried this personally, but seems like you might be able to use a "File to File" scenario with no mapping, and use the "IDOCFlatToXmlConvertor" Module in your File Adapter Comms Channel and it may just work, giving you files that are the IDoc XML version of the flat file it is reading. It looks like it does an RFC call to the back-end SAP system where the IDocs are originally from (or could be any system as long as you know the IDocs in there are identical), and reads the IDoc metadata (which has always included flat file field offsets for each IDoc Segment Field), and applies that either to convert from flat file IDoc to XML IDoc, or XML IDoc to flat file IDoc.
It does mention that there is a limitation that there can only be one IDoc in the source flat file - could be a problem if you have many in one file, which is pretty typical.
Regards,
Brendan

Use of Function Module IDOC_INPUT_CREDITOR

Hi All,
Could you please let me know the use of the function module IDOC_INPUT_CREDITOR. If i customise this function module by copying to Z_IDOC_INPUT_CREDITOR.. is it possible for me to post the vendor classification data by using the function module.
Thank You,
Suresh

Hi,
This function module is used to post Vendor realted information through IDOCs. You can copy the same and can create your own but you need to attach this to your own IDOC message type or you can call through your own customized transaction.
-suresh Revuru

!!URGENT!!HELP REQD!! Transfer of idocs using ABAP port to partner system

I am trying to transfer idocs using an ABAP port (with a FM assigned) from R/3 to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
Is there a background process/event which needs to be run to trigger this ?
This works fine in our QA but not in our Dev. system.

Shankar,
As per my understanding,
IDOCs transferred to Function module& in BD87.
This message your checking in receiving system.
why dont you check the partner profile in receiving end.
there might be the settings here choosed for Background process.
If yes, please check there might be background activity or program scheduled to process at a given time.
As you have the QA system working fine. compare the settings.
that will be the easiest way.
THIS is for my information 
why are you using the ABAP port.
Is there any unique funtionlaity given by this.
if you have info., i would like to know.
Regards
Satheesh

!!URGENT!!HELP!! Transfer of IDOCs using ABAP Port to Partner

I am trying to transfer idocs using an ABAP port (with a FM assigned) to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
Is there a background process/event which needs to be run to trigger this ?
This works fine in our QA but not in our Dev. system.
Message was edited by: shankar krishnamurthy

Shankar,
As per my understanding,
IDOCs transferred to Function module& in BD87.
This message your checking in receiving system.
why dont you check the partner profile in receiving end.
there might be the settings here choosed for Background process.
If yes, please check there might be background activity or program scheduled to process at a given time.
As you have the QA system working fine. compare the settings.
that will be the easiest way.
THIS is for my information 
why are you using the ABAP port.
Is there any unique funtionlaity given by this.
if you have info., i would like to know.
Regards
Satheesh

EDI file to IDOC using Business connector 4.6

Hi Gurus,
We have a requirement of converting the EDI file to IDOC using Business connector 4.6 (943 & 944 ) one Inbound and other is outbound ..
Can any one of you share the document on developing the scensrio ... we have searched couldnt get the same.
Thanks in advance .
Ramamurthy

Hi Raj,
Thanks for the reply , Yes currently we also having the project using PI as rightly said we are using the seeburger and then converting the EDI format to XML and then mapped in IR to the IDOC .
also using Item field conversion we developed some projects , similarly we have developed using modules too .
Since the Business connector is new to us we didnt able to catch hold on where to import the Java program that we write in the Business connector ... from Jothi reply understood the server side configuration.
In case of BC where is that we need to implement the java code if you can share some thing on this would be good .
Could you please share on how to transform and then implement the code in the BC ....
Thanks,
Ramamurthy

Whats the use of function module RSAP_IDOC_SEND?

Hi Gurus,
Can anyone please let me know the use of Function Module - RSAP_IDOC_SEND.
Regards
Avi....

Hi
Check this...
Send IDOC in parallel dialog process.
 CALL FUNCTION 'RSAP_IDOC_SEND'
 STARTING NEW TASK l_task
 PERFORMING callback_parallel_idoc ON END OF TASK
 EXPORTING
 i_mestyp = p_mestyp
 i_rcvprt = p_rcvprt
 i_rcvprn = p_rcvprn
 i_flag_commit_work = sbiwa_c_flag_on
 i_s_rqstprms = l_s_rorqstprms
 TABLES
 i_t_idoc_data = p_t_idoc_data
 EXCEPTIONS
 system_failure = 1
 communication_failure = 2.
reward if Helpful

How to insert WorkBench Request to a domain using a function Module...

Dear ALL,
                    I am creating a program where I have created a domain using a Function Module and assigned the same domain to a package using a Function Module. Now I want to assign the domain to a WorkBench Request...Can anyone tell me of a Function Module to achieve the same??? Please note that the WorkBench Request is entered by the user on the Selection-Screen.
Moderator message: please do not open multiple threads for the same issue, rather follow up (or bump up) on existing ones.
Edited by: Thomas Zloch on Dec 15, 2010 1:18 PM

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

Inbound IDoc using LSMW

Hi..
I am trying To Upload customer master data using LSMW with IDOc.
I am debugging the Inbound IDoc Using BD87 and INPUT_METHOD = 'A'
One segment E1KNB1M data is not passed to transaction 'XD01' due that my company code data is not updated
Pls tell me how to pass segment E1KNB1M data to transaction.
I am using Message type : /SAPSLL/DEBMAS_SLL
           Idoc type    : Debmas03
        Function Module : IDOC_INPUT_DEBITOR

Hi Rishi,
     Thanks for the document. But the document mainly concentrates on LSMW(I'm aware of generic LSMW with BDC), it doesn't explain the inbound IDoc, segment merging, Creation of partner function or Message and Basic types WRT inbound IDoc. Please send any document with that relevance.
Kiran

Idocs used in WM module

Similar Messages

Maybe you are looking for