Idvd encoding problem

now im trying to create a dvd that totals in 151 mins and 8.27 gb. i also went out and purchased some double layer blank dvd's but i am still getting a "your project exceeds the maximum content duration. to burn your DVD, change the encoder setting in the project info window." can someone help me figure out why this wont work because i have more than enough room.

The 8.27GB is meaningless - it's the time - 151 minutes - that counts in iDVD.
151 minutes will require the use of a double layer DVD as well as selecting either 'High Quality' or 'Professional Quality' encoding. 'Best Performance' won't work.

Similar Messages

  • Another ENCODING PROBLEM... Please hellp!

    Hello....this is a long one...gets some coffee.
    Many of you have no doub't seen the movie "Ground Hog Day" with Bill Murry. Great movie. Well, in fact, the sequel is being made right here in front of my very own computer screen, with me waking up every morning with the same iDvD problem. I'm now in the 5th day. The only difference, I haven't come to the part where I kill myself, but it's not far away.
    I have been editing a project for 3 weeks now, and finally finished the editing part in iMovie HD 5.0.2. Last Monday, I started the iDvD encoding to make a disc. And for some reason, it will not encode. It just sits there for hours and hours and hours (6 or so to be exact) I have tried, and re-tried the process using many different ideas to the possible cause. I have scowered the internet, and thought I had some good leads as to the fix, but still nothing. It just sit's there.
    Now, I have authored and made DvD's before, and no problem. But those projects weren't as big as this. However, they encoded and burned fine.
    Actually, the first time that I sent this file to the iDvD program to start the encoding, did the blue progress bar start to move....but only after a looooong wait. It got 3/4 of the way through, and all of a sudden .... it stopped, closed out, shut down, went to heck and everything else. A friendly message came up saying "iDvD unexpectedly quit."
    I figured that out, without them telling me. Since then, I can't even get the blue progress bar to show up.
    I have a G4 mirrored tower (duel 1GHz 1MB L3 per and 80 g drive, and 768 ram. The movie has been edited down to 58min, 35 seconds and 15 frames, from over two and a half hours of imported video. The left over video was trashed to create more space of 25.6G of which is now available before I sent to iDvD.
    I am trying to burn to a 4.7 disc, and no longer use the best performance setting, but the best quality setting. That didn't help. I tried deleting the assets. That didn't help. I tried throwing away the idvd preferences, re-starting, and re-authoring the project. That didn't help. I've tried a local psychic (they've never worked for me - why did I do that?).
    This movie is a wedding with a ton of effects, transitions, edits, music, etc. The whole project folder weighs in at 22.67G, and 21 chapters.
    Some suggestions to me, get more than 768 ram, and some say I need more storage space. A local college teacher tells me that I have plenty of storage space, and thought that 768 ram should do the trick. What the heck?
    One thing I noticed today: I checked the thing called console log, and there are what looks like several hundred entries like this:
    2006-04-22 22:53:20.974 iDVD[390] playlist track 12 contains bad track id
    and a few like this:
    2006-04-22 23:55:53.367 iDVD[480] Path (null) given to -[NSWorkspace iconForFile:] is not a full path.
    Is this some kind of clue as to what's going on?
    One other thing: The video was originally shot in analog, then converted. Someone suggested the time-base signal may be different. But I have shot analog before with no problem.
    I just don't have enough time and knowledge in this area to continue a never ending experiment to find out why this particular project will no longer encode or burn.
    I have done everything I can think of, short of dumping the whole imovie project folder and starting the editing process over again. That is not an option. I have to deliver this next week, or, or... I will have to move to a nearby cave. I guess I could go out and buy a whole bunch of ram and extra space, but if I don't need to, I don't want to.
    Please help! And thanks in advance to anyone!
    - TEXASFLOOD
    P.S. I ran a hardware check, no problemo.
    G4 Mirrored super drive   Mac OS X (10.4.6)   I'm tired now.
    G4 Mirrored super drive   Mac OS X (10.4.6)  

    I'm having similar issues, but the export to tape, reimport trick did not work. I appear to be having a problem with iDVD itself. Even when I trash the preferences, and launch iDVD, and create a new black project, the following appears in my console:
    2006-07-12 20:56:11.485 iDVD[465] playlist track 1 contains bad track id
    2006-07-12 20:56:11.485 iDVD[465] playlist track 2 contains bad track id
    2006-07-12 20:56:11.485 iDVD[465] playlist track 3 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 4 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 5 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 6 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 7 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 8 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 9 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 10 contains bad track id
    2006-07-12 20:56:11.486 iDVD[465] playlist track 11 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 12 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 13 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 14 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 15 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 16 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 17 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 18 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 19 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 20 contains bad track id
    2006-07-12 20:56:11.487 iDVD[465] playlist track 21 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 22 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 23 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 24 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 26 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 27 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 28 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 29 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 30 contains bad track id
    2006-07-12 20:56:11.488 iDVD[465] playlist track 31 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 32 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 33 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 34 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 35 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 36 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 37 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 38 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 39 contains bad track id
    2006-07-12 20:56:11.489 iDVD[465] playlist track 40 contains bad track id
    2006-07-12 20:56:11.490 iDVD[465] playlist track 41 contains bad track id
    2006-07-12 20:56:11.490 iDVD[465] playlist track 44 contains bad track id
    This is not a problem with any specific project. Any help would be appreciated.

  • SuperDrive and Encoding Problems

    Can someone please explain to me why a disk would be
    un useable after the encoding process but before the burn process?
    I thought that the encoding didn't put any data on the disk and it was still blank.
    I'm having problems with my Super Drive again. It stopped burning DL disks and I tested out 3 different disks.
    Last week I burned about 10 DL disks and everything was fine, this week, it won't burn.
    I'm not sure I'm too impressed if this machine keeps puttering out with the burn process.
    Has anyone else experienced this with their drive?
    And why can't disks be used again after the encoding process?
    I don't understand that at all.
    Thanks for your help, if you've got it.

    +And why can't disks be used again after the encoding process?+
    If you don't create a disk image, iDVD encodes and then burns the DVD-R and then spits it out and asks if you'd like to make another copy.

  • Encoding problems in email while on Windows Mail app

    Hello.
    I have a question concerning email and encoding problems in the Windows Mail App in Windows 8.1.  I have encountered a problem with an email I received, while reading, I see strange ASCII characters in one email.  I have never encountered it in
    my web browsers nor Gmail, just the Mail App.
    I was referred to come here when I had asked a similar question there:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-ecoms/strange-foreign-ascii-characters-appearing-in/911f8a44-c302-4fa1-bcaa-3297b32d9120
    I don't know which forum to go to so I picked here.
    Is there any way that it can be resolved.  I tried to troubleshoot, nothing worked; I even synched, to no avail.
    I look forward to a response.
    JB

    Hi JB,
    The responder on answers was a bit confused. The MSDN forums are for developers to discuss writing their own apps. We cannot help with problems using Windows or its built-in apps.
    If the folks on answers cannot help then you may need to open a support incident. See
    http://support.microsoft.com , or the folks on answers may be able to direct you to the specific page for the Windows Mail app.
    --Rob

  • Encoding problem while reading binary data from MQ-series

    Dear all,
    we are running on 7.0 and we have an encoding problem while reading binary data from MQ-series. Because we are getting flat strings from queue we use module "Plain2ML" (MessageTransformBean) for wrapping xml-elements around the incoming data.
    The MQ-Series-Server is using CCSID 850, which we configured in connection parameters in communication channel (both parameters for Queuemanager CCSID and also CCSID of target).If there are special characters in the message (which HEX-values differ from codepage to codepage) we get errors in our adapter while executing, please see stack-trace for further analysis below.
    It seems to us that
    1. method ByteToCharUTF8.convert() expects UTF-8 in binary data
    2. Both CCSID parameters are not used anyway in JMS-adapter
    How can we solve this problem without changing anything on MQ-site?
    Here is the stack-trace:
    Catching com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
        at com.sap.aii.af.modules.trans.MessageTransformBean.throwModuleException(MessageTransformBean.java:453)
        at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:387)
        at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
        at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
        at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
        at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:84)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ConvertBinaryToXiMessageFilter.filter(ConvertBinaryToXiMessageFilter.java:304)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ConvertJmsMessageToBinaryFilter.filter(ConvertJmsMessageToBinaryFilter.java:112)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:87)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:123)
        at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filter(TxManagerFilter.java:59)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.DynamicConfigurationFilter.filter(DynamicConfigurationFilter.java:72)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.PmiAgentFilter.filter(PmiAgentFilter.java:66)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.InboundCorrelationFilter.filter(InboundCorrelationFilter.java:60)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.JmsHeadersProfileFilter.filter(JmsHeadersProfileFilter.java:59)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageInvocationsFilter.filter(MessageInvocationsFilter.java:89)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.JarmMonitorFilter.filter(JarmMonitorFilter.java:57)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ThreadNamingFilter.filter(ThreadNamingFilter.java:62)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.SenderChannelImpl.doReceive(SenderChannelImpl.java:263)
        at com.sap.aii.adapter.jms.core.channel.ChannelImpl.receive(ChannelImpl.java:437)
        at com.sap.aii.adapter.jms.core.connector.MessageListenerImpl.onMessage(MessageListenerImpl.java:36)
        at com.ibm.mq.jms.MQMessageConsumer$FacadeMessageListener.onMessage(MQMessageConsumer.java:399)
        at com.ibm.msg.client.jms.internal.JmsMessageConsumerImpl$JmsProviderMessageListener.onMessage(JmsMessageConsumerImpl.java:904)
        at com.ibm.msg.client.wmq.v6.jms.internal.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4249)
        at com.ibm.msg.client.wmq.v6.jms.internal.SessionAsyncHelper.run(SessionAsyncHelper.java:537)
        at java.lang.Thread.run(Thread.java:770)
    Caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
        at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:714)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:538)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:528)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:471)
        at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:364)
        ... 36 more
    Caused by: sun.io.MalformedInputException
        at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:270)
        at sun.nio.cs.StreamDecoder$ConverterSD.convertInto(StreamDecoder.java:287)
        at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java:337)
        at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:223)
        at java.io.InputStreamReader.read(InputStreamReader.java:208)
        at java.io.BufferedReader.fill(BufferedReader.java:153)
        at java.io.BufferedReader.readLine(BufferedReader.java:316)
        at java.io.LineNumberReader.readLine(LineNumberReader.java:176)
        at com.sap.aii.messaging.adapter.Conversion.convertPlain2XML(Conversion.java:310)
        at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:709)
        ... 40 more
    Any ideas?
    Kind regards, Stefan

    Hi Stefan,
    for the first MTB now we are using only one parameter: Transform.ContentType = text/plain;charset="ISO-8859-1"
    The second MTB, which does the XML-Wrapping, is configured like this:
    Transform.Class = com.sap.aii.messaging.adapter.Conversion
    Transform.ContentType = application/xml
    xml.conversionType = SimplePlain2XML
    xml.fieldNames = value
    xml.fieldSeparator = §%zulu§%
    xml.processFieldNames = fromConfiguration
    xml.structureTitle = payload
    Both CCSID configuration parameters from the "Source"-Tab we've set to 850.
    Now, we don't get an error anymore - sun.io.malformedInputException - , but, unfortunately, now special character conversion succeeded (we need an "ß" and we get an ISO-HEX-E1 -> á).  E1 is (different from ISO) an "ß" in 850.
    Any ideas?

  • IDVD 08 - problem with scene selection tabs not working after "burn"

    I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
    The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
    I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
    Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
    Thanks.

    I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
    If this is it:
    Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
    The following points are concerning iDVD'08 using any of the 7.0 Themes:
    - Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
    - Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
    Quick and dirty workaround:
    You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
    But this is of course not the clue...
    It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
    This may also be a thread you could be interested in:
    http://discussions.apple.com/thread.jspa?threadID=1203323
    Cheers,
    Roland

  • Encoding problem in call-back to hook URL (post parameters)

    Hello all,
    I'm encountering a character encoding problem while retrieving the content of the shopping basket from one of our provider.
    After the POST request is made by the provider to our system using the hook url, when debbuging I can see that some special characters are represented with the sign '#' (after the call the ITS_IMPORT_CONTEXT).
    In our case using the parameter http_content_charset with various values, including UTF-8, did not change the result.
    Inspecting the HTTP traffic has highlighted the following: the encoding received from the provider is related to UTF-8, but while we are expecting the hexadecimal values, we are receiving the "Unicode code points", which are not recognized by our SAP system. For more details look at the UTF-8 encoding table found here and compare the values under column "Unicode code point" with the one under column "UTF-8 (hex.)".
    As an example, for the character 'é', we are receiving the value "%E9" (the code point) instead of receiving the the hexa value : "%C3%A9".
    Do you have any idee if this can be corrected on our side or if the provider must addapt the way it's sending the POST parameters?
    Many thanks in advance for you help.
    Best regards,
    Jerome.

    Hi Jason,
    Indeed I had contacted the provider and informed them about the encoding problem and the fact that passing the parameter http_content_charset had no effect on the sent back encoding.
    They have taken into account my request and have changed the encoding used during the request to the HOOK_URL.
    Thanks to all of your for your help.
    Regards,
    Jerome.

  • Character encoding problem using XSLT and Tomcat on Linux

    Hi,
    I have an application running on a Tomcat 4.1.18 application server that applies XSLT transformations to DOM objects using standard calls to javax.xml.transform API. The JDK is J2SE 1.4.1_01.
    It is all OK while running on a development enviroment (which is Windows NT 4.0 work station), but when I put it in the production enviroment (which is a red hat linux 8.0), it comes up with some kind of encoding problem: the extended characters (in spanish) are not shown as they should.
    The XSL stylesheets are using the ISO-8859-1 encoding, but I have also tried with UTF-8.
    These stylesheets are dynamicly generated from a JSP:
    // opens a connection to a JSP that generates the XSL
    URLConnection urlConn = (new URL( xxxxxx )).openConnection();
    Reader readerJsp = new BufferedReader(new InputStreamReader( urlConn.getInputStream() ));
    // Gets the object that represents the XSL
    Templates translet = tFactory.newTemplates( new StreamSource( readerJsp ));
    Transformer transformer = translet.newTransformer();
    // applies transformations
    // the output is sent to the HttpServletResponse's outputStream object
    transformer.transform(myDOMObject, new StreamResult(response.getOutputStream()) );Any help would be appreciated.

    Probably you need to set your LANG OS especific environment variable to spanish.
    Try adding this line:
    export LANG=es_ES
    to your tomcat/bin/catalina.sh, and restart tomcat.
    It should look like this:
    # OS specific support.  $var _must_ be set to either true or false.
    cygwin=false
    case "`uname`" in
    CYGWIN*) cygwin=true;;
    esac
    export LANG=es_ES
    # resolve links - $0 may be a softlink
    PRG="$0"
    .(BTW, keep using ISO-8859-1 encoding for your XSL)
    HTH
    Un Saludo!

  • C# GWTypeLibrary - AddressBook Entry encoding problem

    Hello.
    I am using C#(Visual Studio 2005) and GroupWareTypeLibrary to develop for
    GroupWise Client 7.0.
    Working with AddressBook I have faced some problems.
    I am getting display name (AddressBookEntry.DisplayName) for all entries
    of AddressBook. Almost all DisplayNames are correct but there are some
    problems with two or three of them (there are some illegal char displayed
    instead of some char of real user DisplayName). I think it is local
    encoding problem bekause I see the same problem with the same users in
    GroupWise Client AddressBook.
    I thought display name is building not correctly but when I tried to get
    these users first and last name I have got the same problem with encoding
    in them.
    Please advice how to decide this problem.
    Regards,
    Alex.

    Sounds like a GW Client problem and not an API problem if you see it in the client address book. Technical Support should be able to help you.
    Glade,
    Novell Developer Support

  • Encoding Problems with WRT300N V2

    Hello guys,
    i have following problem:
    I have a WRT300n Router and it seems to have problems with WPA2 encoding. I have 2 different deviceses (a SMC Ethernet Bridge and a PS3) trying to connect to my Linksys wireless router. No chance in WPA2 mode but when I try in WEP-Mode, both devicec can connect to it.
    Are there known encoding problems?
    Any idea what i can do?

    It is able to use. But my router always drops the connection. WEP is no problem, but ... what about low security and Wirless N is not enabled ??

  • Encoding problem (via ORB)

    Hello,
    I posted this problem few months ago, but still havent been able to solve this.
    I have a Client Server program which communicates via ORB, i.e. using CORBA, with server running on Solaris OS and Client running on windows.
    The server returns string containing chinese characters to the client.
    However, my chinese characters dont appear properly on the client side.
    If i run the client on the Solaris OS there is no problem with it.
    I tried converting the encode of the string by getting its byte and creating
    a new string with encoding parameter. None of this seems to work.
    I can see the chinese character when the server is writing to OutputStream of CORBA, but on the InputStream of CORBA it does not
    show properly.
    Any ideas on how i can overcome this encoding problem where the C/S is
    communicating via CORBA (ORB)?
    Thanks in advance.

    Thanks for your reply
    Yes, i know the BIG5 is for Traditional Chinese and japansese is using like Shift-JIS or EUC.
    So when i try to post japanese in a BIg5 web page, i think it's normal that i can't see it in BIG5 encoding.
    But then i change the Safari default decoding to BIG5 HKSCS, the japanese appers! At the same time i can see the traditional chinese too!
    And if i use Firefox, i can both see the japanese and chinese at the default BIG5 encoding.
    So i simple think maybe safari translate my japanese into BIG5 HKSCS,not Shift-JIS. But if i use Firefox, i can get the same result with only BIG5 encoding, not BIG5 HKSCS. So i am just wondering why it's different between Safari and Firefox with the same BIG5 encoding.
    Following is a example URL
    It's a MAC discussing froum with BIG5 encoding in Taiwan.
    http://ubb.frostyplace.com.tw/viewtopic.php?t=19162
    It's a froum topic posted by me. I input some japanese into this topic
    If you browse this page with Safari BIG5 encoding, you can see a lot of question mark instead of the original japanese word that i and other people posted.
    But if you change the encoding to BIG5 HKSCS, the japanese appears. And if you using Firefox with BIG5 encoding, the japanese appears too.
    So is it someing wrong with Safari's BIG5 encoding or some other reason makes this happen?

  • View Object Encoding problem

    I'm using Jdeveloper version 11.1.2.1. I have a encoding problem when creating View Object based on a query. This is my query:
    select id, DECODE(id,'11','Индивидуално,'13','Semejno','14','Grupno') naziv
    from ins_type
    where class_id = '14' and id in ('11', '13', '14')
    It is a simple LOV query with cyrilic letters. When I save the ViewObject and re-open it im getting question marks(???????) instead of the cyrilic letters. This only happens in the view object. I dont have other encoding issues when working with cyrilic letters only when im trying to build a View Object based on a query that has cyrilic letters. If i read those values from the database everything is fine
    Thanks,

    Change the encoding of your application to UTF-8 which appears to be sufficient for cyrilic chars. Here is a quick guide on how to do this http://docs.oracle.com/cd/E17984_01/doc.898/e14693/appa_configuring_jdev.htm
    You may also need to update any pages that have encoding explicitly set

  • Czech characters encoding problem in RTFTemplate with Velocity engine

    Hi,
    I am trying to use your RTFTemplate project but I have trouble displaying Czech characters in the generated RTF document. Instead of characters like �čř� I get only questionmarks ????. I thought that this could be related to setting a wrong encoding in the velocity.properties file, so I set it to windows-1250 (support for Czech characters) but it didn�t help. Do you have any idea, what could be the problem? If this is not the right place to ask such question, please let me know about a better one.
    Thank you for your time,
    Ivo Jansky

    Hi Jason,
    Indeed I had contacted the provider and informed them about the encoding problem and the fact that passing the parameter http_content_charset had no effect on the sent back encoding.
    They have taken into account my request and have changed the encoding used during the request to the HOOK_URL.
    Thanks to all of your for your help.
    Regards,
    Jerome.

  • Urgent , encoding problem

    Hi ,
    i have received very important msg from ministry , but i cannot read it
    its be like this : 爀椀愀氀∀㸀
    i want to convert it to arabic chars ,
    any ideas ?

    Yes, it's an encoding problem. And no, the damagehas
    already been done by applying an incorrectencoding.
    This cannot be reversed.so there is no solution for this ?Yep you're fucked.
    The Ministry of Double Ungood Codings will be coming to collect you shortly so that you might be educated with the double plus good ways.

  • AC3 audio encoding problems

    Have been encoding ac3 without any problems until recently. Now all ac3 encodes just play back as digital "noise", and the problems exists with default as well as modified versions of the standard ac3 preset.
    I'm using latest versions of Compressor and Quicktime. Anyone seen this issue and know how to solve? I'm considering reinstalling Compressor, but that seems to entail a complete FCS2 reinstall...

    UPDATE: I rebooted my mac using my backup system disk, which has quicktime 7.1.6 installed. I found that under this configuration my ac3 files could be played back. So it's NOT an encoding problem after all. It seems to be a decoding problem. So next up I'll try reinstalling my current version of Quicktime on the main system disk (that's QT 7.2 of course.) If that doesn't work, I'll have to try reverting to Quictime 7.1.6 I guess...

Maybe you are looking for