IDVD: 'ME BROK'N' Message in series 5 and 6 Theme Previews

When Deciding on what theme to use after just installing iLife '08, the themes under 5.0 and 6.0 have a preview message saying 'Me Brok'n' in purple writing with a lime background, it looks very childish writing however all the other themes work fine. Although it makes it difficult to choose, and well it shouldn't be there anyway.
If some one can help it would be mostly appreciated, and if you need to have a screenshoot I have one available.
Thanks

Delete the iDVD preference file, com.apple.iDVD.plist, that resides in your User/Library/Preferences folder. See if that will help.
You might have to do a custom install of the iLife 08 and select the older themes to reinstall. Then try again.

Similar Messages

  • I purchased a tv series and downloaded the first episode, when I went to download the next episode a message popped up saying "this computer is already associated with an apple id" and won't let me download the rest of the shows

    I purchased a tv series and downloaded the first episode, when I went to download the next episode a message popped up saying "this computer is already associated with an apple id.....You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 41 days" and won't let me download the rest of the shows even though I haven't changed accounts and I'm using the same account I purchased the shows with.

    It's been months, so you may not care anymore, but you can't download songs from multiple Apple IDs over a 90 days period.  Sorry, it's not allowed for legal reasons.

  • I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    Hi
    And if You change view - in main "window/view field" so that You see the box-plot structure.
    No exclamation marks there either ?
    and non at the front page ?
    iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
    Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
    Yours Bengt W

  • This content is not authorized, message in my rentals,and purchased Series and Movies

    I keep geting this message, This content is not authorized, on my series and movies

    I have this exact issue.  I am running 7.1.1 and it all worked perfectly when just running 7.0 back in February.  I have the problem on both my iPhone 4 and my iPad mini (1G).  The content I have imported myself from DVD's works fine.  The only content that doesn't work is what I purchased on iTunes. Movies, and TV shows, SD and HD. Nothing purchased works. It comes up as "Cannot Open: This content is not authorised." I've checked. I am logged in with the correct iTunes account for home sharing on both the iDevices and the Macbook.  I am running the latest iTunes and iOS versions... w. t. f.
    I have airvideo and have used it. I would prefer if this worked as advertised as it did mere months ago. 
    Things haven't changed on my tablets except for the upgrades...

  • I tried to download a tv series and only 2 of the episode actually downloaded (the others have an error message).  I can't figure out how to try to download them again.  Thanks for any help

    I tried to download a tv series and only 2 of the episode actually downloaded (the others have an error message).  I can't figure out how to try to download them again.  Thanks for any help

    Open the Disk Utility in the /Applications/Utilities/ folder, click on it in the sidebar, select the Erase tab, and reformat it.
    (103900)

  • I have downloaded a serie and now i want it to put on a dvd . can you make a dvd with menu in idvd from the serie

    i have downloaded a  serie and now i would like to put them on dvd with a menu so each plot can play separatetly

    split the show into parts
    add each episode to your iDVD project ..
    (Just curiosity: Kurt, are you from Stuttgart? )

  • Broker/Cluster Message Persistence and Replication

    I am evaluating the Sun JMS MQ implementation and I am trying to determine if messages sent to a Broker within a Cluster are replicated to different Brokers and as such the different Brokers' persistence message stores?
    I what a HA solution that has no single point of failure within a site (and ultimately across sites, but let's focus on a single site to start with). I need the replication to ensure that if Broker-A goes down the message is still available and can be consumed via Broker-B; and not relying on Broker-A being restarted.
    There is a statement within the Technical Overview document that might suggest that what I am looking for is not possible. It says...
    "Note that broker clusters provide service availability but not data availability. If one broker in a cluster fails, clients connected to that broker can reconnect to another broker in the cluster but may lose some data while they are reconnected to the alternate broker."
    If I am not asking to much already any cases studies, blue prints etc. would be nice. But simple answers to this question will also get my deep thanks.
    Regards
    Paul

    "Note that broker clusters provide service
    availability but not data availability. If one broker
    in a cluster fails, clients connected to that broker
    can reconnect to another broker in the cluster but
    may lose some data while they are reconnected to the
    alternate broker."Yes, that's clustering. Messages are stored-and-forwarded. If the broker where the message is stored goes down, it is not available until the broker restarts.
    What you are looking for is high availability where messages from the active instance are synchronously replicated to a standby instance. In the failover case the JMS clients tranparently reconnect and operation continues.
    I don't know if Sun IMQ provides that but I do know that SwiftMQ does that very well:
    http://www.swiftmq.com/products/harouter/introduction/index.html
    Full docs start here:
    http://www.swiftmq.com/products/harouter/index.html
    -- Andreas

  • 1600 all-in-one series printer error message to remove and check color cartridge will not go away

    Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled).  Any help would be appreciated.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • Why does iDVD keep giving me a multiplexing error and ejects my DVD?

    I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
    dennis

    Hi
    Multiplex Error - is one of the most complex error to run into - can be so much
    see (especially new info at end of list)
    MULTIPLEX ERROR !
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev. (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Max Mccarty
    Mar 29, 2013 7:55 PM
    I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
    Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD  burned the disk perfectly.
    The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
    Yours Bengt W

  • What is the difference between E-Series and Commun...

    Both E-series and Communicators are business phones,then what is the difference between them?
    What is so special that there are two types of smartphones.

    Communcatiors is just a name that nokia used to describe it's larger fold open business phones.
    The last (and still the current) communicator was the E90 which uses the S60 operating system, so it is both an E series and a communicator.  It was also the first (and only) communicator to use S60.
    The long discontinued communicators of the past used a different operating system, S80. S80 and S60 are not cross compatible with each other.
    S80 was dropped in favour of S60 when the E90 launched.  This was a cost saving exercise so that nokia only had one smartphone OS to concentrate resources on.
    Message Edited by psychomania on 18-Aug-2009 03:12 PM

  • Integration Broker Application Messages Issue

    Hi Gurus,
    We are having an issue with the Integration Broker Application Messages.
    Here's the issue, when we run Dynrole it process Application Messages. All messages go to Done status, but checking the instance, the Footer comes first, where the header should comes first. This issue happens from time to time, we only run 8 application messages at a time (header and footer included). BTW, failover is enabled on our server.
    We are trying to find a solution on this, please help us.
    Thanks,
    Red

    Hi,
    Did it resolved? If yes, please share here if possible.
    Cheers,
    Elvis.

  • Installed hp100 d410 series and cant connect to scanner

    Installed hp10 d410 series and cannot connect to scanner

    @WhiteLotus1
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Bgm.ser and jaxb.properties not created

    Is there a particular reason to why the bgm.ser and jaxb.properties files are not created when a schema only consists of a simpletype and I run the binding compiler???
    The two files seem to be created when I include a 'dummy' complextype in the schema. Is a complextype needed in order for the files to be created?
    Cheers.
    Anders
    <simpleType name="Values">
        <restriction base="string">
            <enumeration value="ValueOne"/>
            <enumeration value="ValueTwo"/>
            <enumeration value="ValueThree"/>
            <enumeration value="ValueFour"/>
        </restriction>
    </simpleType>

    I've had the same exact problem! I had the property file in my JAR file properly, but the JAXBContext.newInstance( "package.name" ) call was failing - while at the same time I could load the property file via the ClassLoader just fine, by hand.
    I played around with source for the jaxb beta a bit and I think I found the problem. I recompiled the JAR file after changing the "fileSep" variable in the "searchforcontextPath" method from "file.separatorChar" to "/".
    This seemed to fix the problem. Well, the problem of it not finding the properties file that is... now I've got some kinda non-marshalable exception (but I haven't even spent 3 minutes on that problem yet, as opposed to the hours wasted on this bug).
    I'm not sure if this bug only cropped up when running under a Windows env or not (my test was running under JBoss on XP... though I was building/compiling under Linux).
    Anyway... to fix this just change that variable.. it's on line 228 (i think... i might have added some debug lines of my own in the code) of the javax/xml/bind/ContextFinder.java file. Then just re-jar it over the old JAR -- oh yeah, you'll need a few Message.property files from the jaxb-api.jar file for the new jar file to work (so make sure you unjar the old file 1st or back it up or whatnot).

  • Whats the difference between sending messages via socket and MQs?

    Whats the difference between sending messages via socket and MQs?

    Soph wrote:
    Whats the difference between sending messages via socket and MQs?With JMS (and the like) your application uses a socket to connect to a central server called a "*Message Broker*". Over this connection it can send or receive messages.
    A Message Broker is somewhat analogous to a database server. Multiple clients connect to it to exchange messages. As with a database a client first establishes a connection, then requests specific facilities like subscriptions.
    It creates a strong decoupling between sender and receiver and handles stuff like allowing multiple receivers for the same message, queuing of messages for applications not currently running and so on.
    (And don't worry, you can get perfectly good message brokers for free such as openMQ and activeMQ.)

  • Broker/Cluster Message Replication

    I am trying to determine if messages sent to a Broker within a Cluster are replicated to different Brokers and as such the different Brokers' persistence message stores?
    I what a HA solution that has no single point of failure within a site (and ultimately across sites, but let's focus on a single site to start with). I need the replication to ensure that if Broker-A goes down the message is still available and can be consumed via Broker-B; and not relying on Broker-A being restarted.
    There is a statement within the Technical Overview document that might suggest that what I am looking for is not possible. It says...
    "Note that broker clusters provide service availability but not data availability. If one broker in a cluster fails, clients connected to that broker can reconnect to another broker in the cluster but may lose some data while they are reconnected to the alternate broker."
    If I am not asking to much already any cases studies, blue prints etc. would be nice. But simple answers to this question will also get my deep thanks.
    Regards
    Paul

    Thank you for the response. I think you have confirmed my fears, but I will ask some more questions, just to make sure I am 100% clear...
    Can 2 brokers share the exact same JDBC message store? From what you are saying we could do that but Broker-B would have to be passive. But to be clear could both Brokers be active and using the same store at the same time?
    I am baffled as to how guaranteed message order can be provided if a Broker and its store is unavailable. Is it that new messages are processed out of order? ie, new messages are processed ignoring the failed broker's messages? Are there known issues with guaranteed message order when a Broker fails?
    Thank you again for the response.
    Regards
    Paul.
    Message was edited by:
    paularmstrong

Maybe you are looking for