Installed hp100 d410 series and cant connect to scanner

Installed hp10 d410 series and cannot connect to scanner

@WhiteLotus1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • Just bought my ipad and cant connect to my home wifi. Any ideas?

    Just bought my ipad and cant connect to my home wifi trying to do initial set up.
    My wifi is working as my macbook runs off it..any ideas?

    1. Turn router off for 30 seconds and on again, this will refresh the IP address of the iPad.
    2. Settings>General>Reset>Reset Network Settings
    3. Try changing router security e.g. WEP/WPA/WPA2
    4. Have you updated router firmware?

  • HT4061 My Ipad2 has a message Ipad disabled  connect to itunes.  The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with.  What can I do?  I cant even access the serial number to contact apple.  Help!

    My Ipad2 has a message: Ipad disabled  connect to itunes.  The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with.  What can I do?  I cant even access the serial number to contact apple.  Help!

    Call Apple anyway. If the device was ever registered with then they will have the serial # on file and can look you up by other info such as your name or phone number.
    To re-enable an iPad any computer with iTunes should work. However, if your data was not backed up to iCloud you will not be able to access it until you get back to your home computer.

  • I some how deleted iphoto. i have since tried to install 9.1.1 and cant because i says i need to install 4.0 first which i cant find. can somebody please tell me what to do and where to go. my mac is a 3,1 and am running version 10.5.1

    can some body help me please!!!
    i some how deleted iphoto. i have since tried to install 9.1.1 and cant because i says i need to install 4.0 first which i cant find. can somebody please tell me what to do and where to go. my mac is a 3,1 and am running version 10.5.1

    reinstall iPhoto - go to your receipts folder ("Your hard drive" ==> library ==> receipts) and remove any iPhoto receipts and reinstall from the restore disks that came with your computer - do a custom install of bundled software only
    For more information  <a href="http://www.macworld.com/article/132243/2008/02/pacifist.html"> click here for the MacWorld article on reinstalling OS X applications.</a>
    9.1. is an update and can only be installed if you have purchased iLife '11 on DVD or iPhoto '11 from the App store - and iPhoto '11 will not run on OS 10.5.8 - or 10.5.1
    LN

  • I just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

    i just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

    Hi..
    Try this support article > Can't connect to the iTunes Store

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • Cant get DTS Connect to show when I install the DD Live and DTS connect pack

    Whats up with this?
    I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
    This is what it is showing.

    Exactly the same problem for me.
    I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
    I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
    [img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
    Thank you for help ...
    Message Edited by didierh on 05-26-2009 06:3 AM

  • Downloaded iOS 7 on my iPhone 4S and cant connect to airport utility.  speakers still work wirelessly from computer so i know it isnt the wiifii connection.  shows everything is connected but when i play a song on itunes the icon doesnt show up for airpor

    I downloaded ios 7 on my iphone 4s and cant play itunes from my iphone to my speakers through airport utility.  it shows im connected thro wifii.  i can play the speakers wirelessly from itunes on my computer so i know its my phone since ios 7 downloaded.  even the icons on the song that turn on the speakers are missing.  what do i have to do to get it back?  Ive deleted airport utility and reinstalled it.  i shutdown my phone and the airport base and wifii and restarted everything.  nothing seems to b helping.

    I just encountered this problem for the first time and stumbled upon this forum to find a solution.  I played around with it a bit and it seems that if you slide your finger from the bottom up, you will come upon that new screen that will allow you to do various functions with your phone (put it in airport mode, lock, etc.), you can select your Airport from this screen and play your music wirelessly from your phone; at least this was my experience. Hope this helps!

  • Error message when trying to do an update on itunes and cant connect my iphone anymore

    My itunes says that i need to update it. So i click the update button but it comes up with a error message and wont update it but now i cant connect my iphone to my computer either. can someone please help me. i have restarted my phone and my computer and still nothing...

    your phone is in recovery mode, which means your data is already lost.  hopefuly you've been keeping regular backups

  • XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

    Okay folks, I need your help out there.
    So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
    I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
    Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
    I know it seems confusing, but thats the best i can describe it.
    tthanks all

    Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
    So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
    You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
    OR
    Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
    I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
    This is a good basic post for older xbox.
    https://discussions.apple.com/thread/5385065?tstart=0

  • I recently updated my iphone 4 to the os5 upgrade and cant connect to wifi

    I recently updated my iphone4 with the os5 upgrade and now cant connect to my network.

    did you get this working if so how??
    cheers

  • Cant see my iPod in Itunes and cant connect to store

    When I open my iTunes my iPod touch dosnt appear under Devices.It is fine when I plug in my iPod Nano (it recognises that no problem).Also when I try to connect to the iTunes store it comes up "the network connection was refused.Make sure your network settings are correct and your network connection is active,then try again".
    I have turned off my Firewalls and I have allowed access in my Macafee before trying it again but to no avail. I have tried it on my friends PC and it worked perfectly. I have uninstalled and installed the 7.5 version of iTunes umpteen times but still nothing.
    Please someone help me.I have paid £199 for something that dosnt want to play !!!

    I forgot to mention that i have tried everything on the apple website and nothing works.

  • Iphone 3gs stuck in recovery mode , power button dosent work, and cant connect to itunes.

    Well This Is Bad.
    So today i used my iphone 3gs.. and then it had a problem so i restored it. then during the restore it gave me error 20. i tried looking at apple support but it didnt help.
    so heres what it has:
    1. broken power button
    2. cant be seen on itunes.. not even the mac!
    3. stuck in recovery mode.
    4. dosent sence a computer.
    now i hear theres a "freezer trick" to get it out of this mode. but i tried it and no luck.
    i also looked on youtube, google,and apple support and stores. but theres nobody who had this problem.
    im trying to wait till the battery runs out but that will take long.
    what should i do?!?

    You are right there as a weard issue try with the battery comes out and then try to connect to the itunes should be working properly, if not fix the power on/off button because are escential to do it.

  • Hi i installed firefox 4 beta and cant uninstall 3.6 on windows 7 64 bit

    i have firefox 4 beata installed but cant get rid of firefox 3.6 i have tried control panel uninstall program and nothing happens i am on windows 7 64 bit

    If the add/remove programs option did not work, you can manually remove any versions that you no longer want. For details of how to remove them see http://kb.mozillazine.org/Uninstalling_Firefox
    Typically, you just need to delete the installation directory to remove Firefox. user data and settings are stored in the [[profiles|profile folder]], so will not be touched when you delete the other versions of Firefox.

  • Installed a television series and one show will not play

    I feel like I am getting the run around...
    I downloaded to my itunes and installed on my ipod the tv series Big Bang Theory season one. Out of the 17 shows one will not play. I have tried uninstalling it and reinstalling it several times with no sucess. I have sent itunes the problem and they allowed me to redownload that show. Still with the same problem, I have installed the new download on my ipod and it will not play. After writing to itunes with my problem they tell me I need Apple ipod support, and gave me the telephone number to call...After calling and waiting on hold for 5 minutes I am being told it is an itunes problem not an ipod problem...I then decided to install it to my husbands ipod and the one eposide will not play on his ipod either. Any idea's on how I can get this to play?

    hmmm, did you get 2 versions? With some moveies you get an HD version for your TV/PC, and an SD version for the iPod. I've only gotten the free TV episodes they give away, so don't know if this is normal for TV shows.
    All I can think of, is make sure it's an SD version that goes on the iPod.
    edit - on 2nd thought, you obviously know what you're doing if you can get the other shows to play. I would just keep after them. If you have an email with an Apple case number, keep replying to that.
    Message was edited by: Katrina S.

Maybe you are looking for