IE page refresh when using an accordion menu

Hi, I have a page which has a jquery CSS styled nested accordion plug in. It's all working just so sweet, opening up menus and submenus which link to relevant pages. When the user navigates onto another page, and then goes back to the page with the accordian on it, it's should all remain open in the same state as it was when they left so they know where they were. That's what it does in Firefox. But in IE, when the user clicks the back button, the page seems to refresh and the accordian is all closed up again. Is there any way to make IE behave as Firefox does? Can I code a ''go back" link which returns them to the page exactly as it was when they left it?

Here it is >>> http://www.comraderysportstours.com.au/indextest.html

Similar Messages

Pages disappear when using xoffset

Can anyone tell me why my pages disappear when using "crop pages xoffset" in Acrobat Pro XI? It works fine in Acrobat Pro 9.

The system has 4GB of memory. The processor is Intel Core i5 - 2400.
As per your suggestion, I updated the driver for the integrated graphics
card (Intel Graphics HD 2000). The new driver is dated January 2014. The
old driver was dated June 2011.
I tried to replicate the blank pages situation, and none went blank. Will
continue to test over the next week or so, but this looks very promising.
Many, many thanks, Pat!

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

"Type mismatch" error in IE7/8 when using custom Actions Menu Image

Hi all,
in APEX 4.2: when using a custom image in the "Actions Menu Image" attribute in an interactive report, I get a "Type mismatch" error in IE7/8 when refreshing the report through PPR (filtering, sorting, paginating etc.). When I leave the "Actions Menu Image" field empty, everything works fine. The error doesn't seem to happen in IE9 (unless using compatibility mode), or in any non-IE browser.
I've been able to reproduce the issue in an application on apex.oracle.com:
http://apex.oracle.com/pls/apex/f?p=69347:1
Some debugging seems to indicate that the following line in widget.interactiveReport.js is the culprit:
lTemp.parentNode.replaceChild($x('apexir_WORKSHEET'), lTemp);Does anybody know if this is a known issue, or if there is some workaround?
Thanks,
Tobias

Hi,
Great solution Paul! It cost me a while before I found out the Action Menu Image was causing my interactive reports to stop refreshing in IE10 and not other browsers. Your solution works great, I've implemented it with a few minor adjustments:
- Put the css in report template (for some reason it didn't work in our own application stylesheet)
- replace 'url("/c/action_dropdown.gif")' with 'url("&APP_IMAGE_PREFIX./<path_to_image>")'
- place one dynamic action on page 0: after refresh of '#apexir_DATA_PANEL' , set event scope to "Dynamic".
- Let the Dynamic action also fire on page load.
- To make sure the dynamic action only works for pages with an interactive report add condition of type 'Exists' with expression:
select 1
from   dual
where :APP_PAGE_ID in (select page_id
                                        from   apex_application_page_ir
                                        where application_id = :APP_ID
Best regards,
Vincent Deelen

Is there a way to control "push" page transitions when using up/down keys to navigate a PDF?

I have a multi-page PDF designed with push page transitions. When using the forward/back arrow keys or the interactive buttons I have designed on the page, the push navigation direction changes whether one is moving forward in the PDF or back. However, if I use the mouse scroll button or up/down arrow keys to navigate, the push navigation only animates from the same direction...and therefore makes it look as if the user is only moving "forward" in the book. Is there a way to control this effect more precisely?
I am creating the document with InDesign CC 2014, adding the page transitions within the file, and exporting to interactive PDF using the setting "Page Transitions: From Document".

I don't think the iPad has it in it to control another device. Unless there's an app for it to be a remote control, but I'd imagine that it woudl be very brand specific.
You can certainly experiment with the VGA or HDMI adapters, but I wouldn't put total faith in them unless you had the ability to experiment prior to your presentation. I'd definitely have a backup plan.

Is there anyway to stop the auto-refresh when using HsGetValue?

Hi there
I am just wondering if there is a way to stop the automatic refresh when opening a workbook that has HsGetValue functions? The issue I am having is that when you create a report in Smart View using the HsGetValue function, save it down, disconnect from Smart View then open it up again, it automatically tries to refresh the data. If you do not type your login, it just changes to #NEED REFRESH and you cant see the data anymore. This only happens when you have Smart View installed, if you are on a vanilla computer you can see the numbers no problems.
The reason we dont want it to refresh is that we want to be able to view data at a point in time, instead of always refreshing to the latest data.
I know that I can stop the refresh by changing Excel to Manual Calculation, instead of auto-calculation on formulas, but this isnt a viable solution as users arent used to manually pressing the Calculate button in Excel for their non Hyperion work.
We are using 11.1.1.3 Planning and Essbase.
Thanks!

See this post Smart view first refresh
Aside from turning auto-calculation off, you would need to copy the cells and paste them as values to get a static worksheet. This will eliminate any future refreshes.

Preview glitch when searching for words on page and when using text tools to write comments/notes on .pdf slides, why?

When using Preview to access my class notes as .pdf files, I have encountered extremely frustrating glitches when trying to search for specific words or phrases within the .pdf files and when trying to use 'text tools' to write notes on the .pdf slides. Preview did not behave in this manor with Mountain Lion OS. This seems to correlate with my recent upgrade to Mavericks OS.
When using the search function you should be able to type in any number of letters or words and press enter to continually cycle through the highlighted findings that match what you have typed in. Instead it now, typically, stops tracking what I type in after about 3-4 letters and the yellow highlight turns grey. Once it does this if you try to press enter to cycle through what it has found it no longer cycles. It never did this in Mountain Lion using the very same .pdf files I had previously used in the old OS, and it does this despite there being multiple matches for what I am searching.
When clicking 'show edit tool bar' button and then 'text tools' button to be able to free text notes on the .pdf file I have to exit out of the 'text tools' mode to be able to advance to the next page. This is extremely inconveneint and, again, Preview did not do this in Mountain Lion.
These are my two major complaints about Preview that I have discovered so far in my short time using it with the new Mavericks OS.
Any help would be very much appreciated.

I have this issue too and was pleased to find this thread. Did either of you find the source of the problem or how to fix it?
I've tried using Wondershare PDF Editor as well and wondered that had messed some settings up. Have either of you used that?
If so, how would I revert to a clean version of Preview?
Hope we can get this sorted.

Using the Accordion Menu - Expand All Option

Hello,
I was wondering if there was any way possible to expand all the options for the accordion menu. I understand there is a 'Collapse All' option but it would be really helpful if there was a way to expand all the options on the accordion menu. If there is no way to do this directly, are there any other options, either via creating a button or a link that would all direct the accordion to expand all the options. Please help! Thank you.

Please feel free to add your suggestion in our ideas section.
Thanks,
Sanjit

New page not being opened in new window when using a dynamic menu

I have read an earlier post about this but I didn't really see a solution I could implement there. I have a dynamic menu, and I want one item on it to open a new frame. Here is the module code from the template.
{module_menu, version="2", menuId="901683", moduleTemplateGroup="Default"}
It is the main template menu from the Tribeca site template.
I have tried inserting (_blank) into the appropriate target frame, and still it opens in the same window. I gathered from the previous post that it was a version issue, but as you can see, the code says "version 2"... or am I mis-reading that?
I couldn't find where to make changes. The previous post suggested I look for the CSS on the home template, but I am not using a home template.
Any thoughts?
Chuck

Thanks Liam, it worked. I need a clarification if you can... I don't need all the items in the menu to open in a new window, so under the menu itself, under the individual items, I would set the target frame to "_self" for the items I need to remain in the same window? Or is it an all or none thing?
I really have appreciated the help you've given me.
Chuck

Page refreshes to top of accordion in IE

I've built an accordion in which the tabs hold data sets that
determine what shows in the content areas. The result is that the
accordion is pretty tall. I use a laptop to test, and the accordion
widget--6 tabs total--has about 3 tabs below the fold. It's great
in FireFox because the page doesn't move when you click a tab, but
if you click on an item in a tab in one of the lower rows (esp the
bottom two) in IE, the page always snaps back to the top of the
accordion widget. This means the animation happens below the
fold--in fact the user often has no indication that anything on
screen has changed. Is there a way to make IE behave more like FF?
One of the project constraints is that I can't change the
doctype (although I've tested with XHTML doctype and seen the same
problem).
Test page is here:
http://www.milesign.com/test/acc_test.html
Thanks

I addressed this by removing the 'tab index' on the accordion
panel. It no longer jumps to the top of the widget in IE.

How to insert blank page into pages document when using word processing mode?

I've recently created a 50+ page document using Pages '09. I started the document using word processing mode. Now, when I view in thumbnail mode and try to insert a blank page somehwere in the middle of the document, it won't allow me to select where I want. It just selects all the pages, as thought they are one section. I believe this is because I am in word processing mode. My question is, can I convert the document to layout mode so that each page represents it's own section, without losing what work I've already done? And if so, how?
The document is entirely text boxes and images, so I don't have any need for word processing space. I just need new pages to act as blank templates for the text boxes and images I create.
Is it possible to keep all my work as is, and convert the document to layout mode vs. word processing mode?
Thanks!

It just selects all the pages, as thought they are one section.
That's because they are one section. You must insert section breaks to separate them. There is no need to use page layout which does make each page a separate section. You have to manually add each page & use text boxes or other containers for the text & link the text boxes.

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

Difference in PDF page size when using Save versus Save As

I am having a problem when I save PDFs from Illustrator with the page size changing
When saving as a PDF from Illustrator CC (Mac OS 10.6.8) the page size of the resultant PDF should be the size of the artboard.
Create New File
Save as PDF (Illustrator Default setting)
Open PDF in Acrobat
The page size equals the size of the artboard
Open same file back into Illustrtor
Edit the file in some way (draw a box outside of the artboard)
Reopen the file back into Acrobat, now the Page size is different from the artboard.
If I resave the file using save as, essentially overwriting the old file, the artboard is back as it should be.
It is almost as if Save As is using the artboard, but Save uses artwork bounds.
This appears to be a glitch but I have not been able to isolate the cause. Tried trashing prefs, didn't help. Had th same problem in CS5, couldn't figure it out then either, so I don't think this is version specific problem.
This problem is specific to my workstation, as my co-workers do not have the same problem, unless they start working on a file I created. Could be some kind of virus like problem.
Anyone had expeirences with this issue? I had really hoped upgrading to CC would have cleared this up but it seems to be following me, which is why I thought trashing prefs would have cleared it up.

Finally found someone with the exact same problem. Our entire department of 7 people is having this same issue. It is strange becasue we can't isolate where it starts.
If we save our PDF back to .ai file,
close and reopen Illustrator CC,
open the .ai file and save to PDF again,
then the file is "clean" and works as expected.
But then somewhere down the line we get another file that does the same thing. Then any file we open after that will have the same problem, unless we repeat the process I mentioned. This has been consistent between Illustrator CS6 and Illustrator CC.
This started happening about 2-3 weeks ago (mabe longer?) and is killing us when we run our PDF to our step and repeat workflows because they use the trim and bleed size for placement and this is being ignored. I am looking for a solution as well.

Bug report: Controls in the Data Entry property page reset when using relative time

Create a blank VI.
Drop a numeric control.
Right click and select "Display Format".
Change to a relative time.
Switch to the "Data Entry" tab page.
Uncheck the "Use Default Limits" boolean.
Try changing the values and you will see that they return to their previous values (inf, by default). This persists even after pressing OK and opening the dialog again. It looks like the values are held in a cache and put back into the controls, since if you change a page and go back to the limits page, it shows the correct values. I also managed to get it to display the values using the correct format (relative time), which I assume is what it should be doing.
This is in LabVIEW 8.6.
Try to take over the world!
Attachments:
Relative Time Data Entry Bug.vi ‏5 KB

I spent some time playing around with this in 8.6.1, and at this time do not consider it a bug - unless there is something I completely missed.
When you set to relative time, the inputs for data entry are expecting HH:MM or HH:MMS, depending on which display setting you chose. Typing a '7' is undefined - does the user mean hours? Minutes? Seconds? Parsecs ?
Once we type in a value that matches the format and we get the display to change, it is true that from now on if we type '7' in the field, it will automatically coerce it to 7:00, if we type 36 it coerces to 36:00. If we type 7.5, it does not change the value at all. I think at this point, the user knows what is going on, so this behavior is acceptable. After accepting the changes and re-opening the properties window, the limits are persistent.
I was not able to reproduce typing a '7' in the limit, having it automatically coerce back to '-inf', then going to a different tab or clicking ok, and coming back and seeing it as 7:00. It was still '-inf'. If you have some more details on this, maybe I can reproduce it, but from everything I tried, users are be able to enter values and these values are saved.
Edit - I am aware of the other forum post and the CAR filed there...
Message Edited by Robbob on 03-03-2009 11:20 AM
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video
Attachments:
2009-03-03_105522.jpg ‏51 KB
2009-03-03_105336.jpg ‏58 KB

Very long materialized view refresh when using self-referencing table

hi,
I have the following query, that takes 15 sec. to execute. When building a materialized view for it, the refreshing process doesn't stop for hours. The result of the query are about 500 rows and the tables contain not more than some 1000 rows, so it's a really simple query.
   SELECT a.A,
          b.B,
          c.C
     FROM (SELECT *
             FROM (SELECT a
                     FROM TableA)) a,
          (SELECT b
             FROM TableA
            WHERE type = 3) b,
          (SELECT c
             FROM TableA) c
    WHERE TRIM (a.x) = TRIM (b.y) AND b.z = c.w;I think it has something to do with the fact, that the same table is used 3 times in the query. When I look in the trace I see that the following statement is executed:
INSERT   /*+ BYPASS_RECURSIVE_CHECK */
      INTO                                DM.Test_MV
   SELECT ...What is the + BYPASS_RECURSIVE_CHECK / hint doing? Can I deactivate it somehow?
And why is there any difference between the query execution and the query execution when refreshing the mat view?
Thanks for your help!

5 digit version no? lots of bugs with mviews out there.
theres a specific note (not a bug) on support 1115148.1 that references that hint though, so try dropping and recreating the view before refreshing.

IE page refresh when using an accordion menu

Similar Messages

Maybe you are looking for