IE Windows randomly fails to show  swapped images preloaded

if you look at this page in IE6 Windows (did not test in
IE5):
http://ever-together.com/site/product_detail.php
and use the little numbers or next-previous arrows to swap
the main image, randomly (it seems), the
image will just not show up.
Since it seems random, you might have to try several times
before an image does not show.
Even an image that has showed before, sometimes does not show
if you just click on its corresponding
number again.
The images are preloaded using <body
onLoad="MM_PreLoadImages()">
The javascript code to swap the images is different on the
numbers, which use MM_setTextOfLayer and
on the previous-next arrows, which use a custom script, but
both randomly fail to display the images
in IE6, so I assume it is an IE bug?
Anybody encountered this problem before?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

<a href="#" onClick="...;return false;">
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:e3tolh$4i$[email protected]..
> (_seb_) wrote:
>> if you look at this page in IE6 Windows (did not
test in IE5):
>>
>>
http://ever-together.com/site/product_detail.php
>>
>> and use the little numbers or next-previous arrows
to swap the main
>> image, randomly (it seems), the image will just not
show up.
>> Since it seems random, you might have to try several
times before an
>> image does not show.
>> Even an image that has showed before, sometimes does
not show if you just
>> click on its corresponding number again.
>>
>> The images are preloaded using <body
onLoad="MM_PreLoadImages()">
>>
>> The javascript code to swap the images is different
on the numbers, which
>> use MM_setTextOfLayer and on the previous-next
arrows, which use a custom
>> script, but both randomly fail to display the images
in IE6, so I assume
>> it is an IE bug?
>>
>> Anybody encountered this problem before?
>>
>>
>
> ok I just remember I had the same problem before and
"solved" it by using
> <a href="#" onClick="...">
> instead of
> <a href="javascript:;" onClick="...">
> The later does NOT swap images in IE, the former does.
> Why, I am still wondering.
> And I would like it to work with "javascript:;", so that
on smaller
> screens my page is not going to jump back to the top
each time the buttons
> are pressed...
>
> Anybody knows a real solution?
>
>
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
> Downloads: Slide Show, Directory Browser, Mailing List

Similar Messages

  • Ipad randomly failing to show videos inside webpages

    I just updated my ipad to the new OS 4.2.1, and since then some vimeo videos embedded in webpages are failing to appear.
    I was able to strem them untill one hour ago when i upgraded, now the ipad randomly fails showing some of those.
    This webpage is an example:
    www.frame.it/page/Portfolio/op/view/id/175/LogoRai1
    This videos still work on ipads with the old OS, so is not an encoding issue.
    On the new OS, the player mask is actually generated, but remains transparent.

    mmmikele wrote:
    Hi Michael,
    of course is supposed to play those and sometimes plays fine on my ipad too.
    I will try explaining myself a bit better:
    There are 5 or 6 videos on this page.
    The ipad randomly fails to show some of these, sometimes it shows 4 sometimes 2.
    And i mean it fails "to show the video box in the page". If you see the play button and the background image it will work fine, but you will notice some blank spaces beetween one video and another, those are not loaded videos.
    The mask just remains transparent.
    Yes, I see the same behavior with 4.2.1. It's probably a Safari bug. If you haven't already done so report it at: http://www.apple.com/feedback/ipad.html
    I couldn't find a work-around for it. The bug is probably in common rending code since it also appears in the iCab browser as well.

  • Preview fails to show embedded images

    Hi,
    Preview.app fails to display certain embedded images, such as throughout the article <http://www.claymath.org/library/seniorscholars/zaslowphysmatics.pdf>. Adobe Reader shows them with aplomb. For what it's worth, Manfred Shubert's PDF plug-in (within Safari) also fails to show the embedded images.
    This failure consistently occurs on all Macs at the Physics Department at Howard University, using the latest Mac OS X 10.4.8 and Preview v.3.0.8, accross a large variety of hardware (PowerMacs, PowerBooks, iMacs and iBooks).
    Is this a bug, or a prorietary PDF feature of Adobe's? Can anyone reproduce it?
    Thanks, Tristan
    G4 PowerBook   Mac OS X (10.4.8)  

    Hi, Tristan.
    I can reproduce the problem with Mac OS X 10.4.8 and Preview Version 3.0.8 (409), i.e. the latest version of Preview.
    The images display correctly in Adobe Acrobat 7.0.8 (latest).
    Checking its the Document Properties in Acrobat, the document is PDF Version 1.3 (Acrobat 4.x), so it should work in Preview. However, it also notes that the PDF was produced by AFPL Ghostscript 8.0, so something in the document's PDF formatting with Ghostscript may not be copacetic with Preview.
    I notice when I open the file in Preview, I see a number of the following messages appear in console.log:
    invalid image /ColorSpace value.
    invalid image /ColorSpace value.
    invalid image /ColorSpace value.
    There may be a specific color space or Colorsync profile embedded in the images or the PDF that is causing the problem in Preview.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Browser should show ALL images, in all formats.

    I recently opened an image for editing from Lightroom to Photoshop, corrected some perspective distortion, and saved the result as a PNG.  Lightroom then failed to show the new image, even after I synchronized the folder.  A respondent in the Lightroom forum said that Lightroom doesn't support PNG, to which I ask, WTF?
    Lightroom should support any format supported by Photoshop.  It displays JPEGs, which aren't a raw format.  Exactly how many products should we have to run concurrently to simply manage images?  Lightroom is supposed to be the product that does it, but if it fails to show all images in each directory, it fails at its purpose.

    MikeLeone wrote: So you think LR should support BMP? PCX? How many cameras store their
    photos in these formats? PS supports them, but why should LR?
    I'll agree with support for PNG, at least as far as exporting, as some
    web sites like using this format rather than JPEG (although the
    reasons for using PNG aren't technical, but legal, AFAIK - licensing
    for using the JPG format - rather than something technical, like
    smaller file size, etc).
    Very true, though I am more arguing that LR should be able to leverage formats available to other Adobe products installed on the same machine more than anything.
    BMP and PCX, no most cameras don't use those formats *anymore*. But I remember having an old camera that took photos in BMP format (it may have been a webcam, but still a camera) which I have in my library from a long time ago. In my day job we still actually use applications that suprisingly enough can only display PCX images; though I never would intentionally keep anything in PCX.
    I think anything it is able to import it should be able to export; but again if you have it natively supported in the Adobe product or universally supported by the OS without additional codec installation it should be supported, even if it is something obscure as PCX.
    MikeLeone wrote:
    That should be a feature request for the camera manufacturers, then,
    shouldn't it? Ask them to share their non-published, proprietary
    drivers with Adobe? Or at the very least, publish an API so LR (and
    presumably, other programs) can call the code (presuming that the code
    is modular enough to be called by other programs, of course).
    Yeah, I understand that neither Canon nor Nikon are supporting DNG files straight out of the camera yet and both still maintain a propreitary formated RAW file, but I would suspect that generally a Canon .CR2 file doesn't change all that much if at all other than the camera identifier from a 20D to a 5D Mk II to the 7D for example.
    Why do current Lightroom users need to wait until Adobe releases 2.6 or 3.0 to be able to use Lightroom with their 7D?
    Why if Adobe releases a Camera RAW update for PS that includes the 7D does it still not work in LR?
    Yes the mfg. need to be more open or pick a standard and run with it, but it just seems excessive for Adobe not to play nice too.
    It is in Canon/Nikon/Adobe's best interest to play nice and share this information with Adobe. So I am betting they are not withholding it. I was getting Canon SDK notifications for the longest time and sometimes months before a Camera was available, and sometimes it was even annouced this information was made available to developers on new camera models. I am sure Nikon does the same thing and Adobe is getting this information from all mfg.
    Christopher

  • Preview app shows png image as transparent window

    When I open a PNG file in Preview.app, it doesn't show the image.  it just shows a transparent window the size of the image.  I can preview the image in the Finder fine. Note the transparent window in the screenshot:
    Is there a cache or preference file I should delete?
    Thanks,
    -Scott

    Here is another thread on similar issue
    Preview - Outline only appears?
    There are at least two different solutions within it - one involves a separate (free) program called Etrecheck, the other possible solution does not.
    Did you recently update? And what system are you having this issue with? On the MBP or Mac Mini?

  • Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open.  The it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

  • Medruck new window for terms failing to show next page

    Dear Experts
    I have created a new form from MEDRUCK and have created a new window for terms and conditions but its failing to show on next page. My terms and conditions are almost half a page hence i want them printed at the back of the purchase order.
    << Moderator message - The answers in the forum are provided by volunteers. Please do not ask for help "urgently". >>
    Have searched but not yet get the answer now.
    Thanks in advance
    Regards
    William Mutero
    Edited by: Rob Burbank on Dec 2, 2011 10:01 AM

    Hi
    The text am using are english like statement for terms and conditions simple text because they are almost half a page i created a window for them so that they will be printed at the back of the purchase order. When i print the report its not being seen. what else could i have done wrong?
    Regards
    William

  • Task Sequence Failing after Stating Boot Image and Restart in WinPE - Windows XP to Windows 7

    Good Morning,
    I am trying to upgrade an XP Machine to Windows 7 (x86). I was using the boot image inbuilt with SCCM 2012 R2 but read that it wont work correcltly. I am using Windows PE 3.1 boot image to boot.
    The TS fails after trying to restart in Windows PE when staging the boot image.
    From the Logs in CCM\Logs\SMSTSLog
    I am still getting the same issue as when i am using the Boot image from ADK 8.1.
    Anybody has an idea on how to solve this issue ? I have read a workaround about replacing the bootsect from the boot image but funily i am using an older boot image.
    Kind Regards,
    Mathieu 

    http://support.microsoft.com/kb/2910552
    Torsten Meringer | http://www.mssccmfaq.de

  • Windows setup failed to open distribution share d:\ds when trying to run the windows embedded standard 7 image builder wizard

    The wizard fails with: windows setup failed to open distribution share d:\ds (..etc)
    I am running it from a USB disk that has over 4GB free space, all the other files and folders are shown in the DS folder ok
    Please advise what i should do here?
    Does the drive need to be a certain format? its FAT32 at the moment (not NTFS, so no security)
    I have tried copying the contents of the wes7-ibw iso to another USB drive and the same thing happens.

    I solved it : setup failed to open distribution share d:\ds  ... error 0x8007000    /0x8007003
    the cause I assume there is something strange about the CD file format on that disk.
    I first created a bootable usb (diskpart) then as i didnt had software to do it all in once
    i converted the original CD to iso, and used other software to burn an ISO as bootable CD on usb.
    ( i used iso to usb for that its free )
    i ve tried it with the usb as fat32 and (using convert converted fat32 to NTFS (stayed bootable).
    I even tried different hard disks no difference same error.
    Each time same error.
    Then in the end i noticed the folder content of the DS folder on USB and CD wasn't equally.
    So then i copied directories one by one over their existing USB counterparts
    After that it worked...
    Maybe the CD isnt folowing some CDrom standards, or uses a rarely used format; not wel recognized by common CDrom tools

  • Aperture 3 Import Dialog Doesn't Show Any Images

    Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
    Screenshot:
    http://dl.dropbox.com/u/1250153/a3.png
    Any ideas or fixes?

    Hello qua
    You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
    I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
    The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
    Regards,
    Gary

  • Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

    Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
    Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
    I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
    I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

    Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

  • HT2531 Spotlight lists items and shows preview images.  BUT what about showing the location address of an item in my computer. Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS 10.5 was more u

    Spotlight lists items and shows preview images.  BUT what about showing the path/location address of an item in my computer.
    Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS X 10.5 was more useful.
    Old OSX Spotlight function automatically displayed path/location within the machine:  e.g. desktop/folder/sub-folder/item.
    Can I make Spotlight show the path?

    Press option-command and the path is displayed at the bottom of the little preview window.  Press command-return and the enclosing folder opens. 

  • Swap Image Behavior with Text

    I am trying to figure something out but can't seem to find
    it. I'm sure it must be pretty simple, but I'm stumped. Basically,
    I have a main image and a few thumbnail images below it. I've
    attached the Swap Image behavior to each thumb to change the main
    image to a different photo and then changed the onMouseOver to
    onClick.
    The problem is I want to also have some photo text or caption
    below the main image to change. Does anyone know how to do this
    with more or less stock DW behaviors? Or if not, how to do it in
    the most efficient way possible?
    Thanks in advance.
    -Bill

    You could always embed the caption information in the image,
    you know? That
    would be the simplest way. Is that possible?
    Alternatively you could create a series of stacked
    containers, each hidden,
    in the location where you want your captions. Then you would
    make your
    onclick event do both the image swap and the Show/Hide on the
    associated
    caption container (*and* a hide on all the rest of the
    caption containers).
    This can be pretty tedious when there are lots of images, and
    you are using
    only the DW User interface (as opposed to Code view). It will
    also take you
    into the realm of positioned elements (probably) which can be
    troublesome
    themselves.
    Finally, if this is all too much for you, there are EXCELLENT
    alternatives
    over at projectseven ($) for doing something like this right
    out of the box.
    http://www.projectseven.com/
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "captcashew" <[email protected]> wrote in
    message
    news:[email protected]...
    >I am trying to figure something out but can't seem to
    find it. I'm sure it
    >must
    > be pretty simple, but I'm stumped. Basically, I have a
    main image and a
    > few
    > thumbnail images below it. I've attached the Swap Image
    behavior to each
    > thumb
    > to change the main image to a different photo and then
    changed the
    > onMouseOver
    > to onClick.
    >
    > The problem is I want to also have some photo text or
    caption below the
    > main
    > image to change. Does anyone know how to do this with
    more or less stock
    > DW
    > behaviors? Or if not, how to do it in the most efficient
    way possible?
    >
    > Thanks in advance.
    >
    > -Bill
    >
    > <p><img src="images/215-suite-2.jpg" alt="Main
    Photo" name="mainImage"
    > width="300" height="225" id="mainImage" /></p>
    > <p> </p>
    > <p> </p>
    > <p><img src="images/215-suite-2.jpg"
    alt="Thumbnail Photo 1"
    > name="thumb1"
    > width="100" height="75" id="thumb1"
    >
    onclick="MM_swapImage('mainImage','','images/215-suite-2.jpg',1)"
    />
    > <img src="images/renovations_02-after.jpg"
    alt="Thumbnail Photo 2"
    > name="thumb2" width="100" height="75" id="thumb2"
    >
    onclick="MM_swapImage('mainImage','','images/renovations_02-after.jpg',1)"
    > />
    > <img src="images/renovations_03-after.jpg"
    alt="Thumbnail Photo 3"
    > name="thumb3" width="100" height="75" id="thumb3"
    >
    onclick="MM_swapImage('mainImage','','images/renovations_03-after.jpg',1)"
    > /></p>
    >

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

  • Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV. Any suggestions?

    Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV.
    Any suggestions?

    silvergc
    Thanks for your comments
    Several of our iPhone users in the UK reported the problem this morning, and as the Apple fan in the office I've got the job of resolving the issue
    The original Excel was an old .xls file, but I have saved it as a .xlsx and the problem still appears
    I haven't spoken with our developer yet, but I assume he has created the Excel file using some programming tools rather that directly using Excel
    In the meantime I have created a simply spreadsheet with 8 cells contain values
    In the first 4 cells, I have formatted them using Currency, and have used the currencies USD, DEM, GBP and CHF
    In the remaining cells I have formatted them using the Accounting option, using the same currencies
    When I review the spreadsheet on the iPhone (or iPad), the first 4 remain the same yet the last four all show the £ symbol
    I have now changed the Region Format of the iPhone to United States, and when viewing on the iPhone the bottom 4 values are now all showing the $ sign!
    If I had created the spreadsheet I would have put the Currency code in a seperate cell and purely used a numeric format for the number, and there would be no issue.  That might be the only solution
    Yes, the Director has the full MS Excel app on his Windows 8 device, but I can't expect all of our clients to go and do the same, in business many of them will have the iPhone
    We may have to change the way we produce the report because of Apple's failings here, and it's not the first time that we have had to change something because Apple devices can't display them properly
    In business, submitting a potential job contract only for the recipient to get the wrong idea of the costs is a major concern

Maybe you are looking for

  • Different issues on Satellite L450D.

    Hi, I bought this laptop a couple of months ago and im having major problems! First of all my first problem was that when i first tried to activate my mcafee trial it said it had expired even though i only started up the laptop! But this problem didn

  • Open items also show all cancelled documents

    Hi Gurus, When the business users review all open items, it also shows any associated cancelled documents (S1, S2). Is there a way to prevent cancelled documents from showing?

  • Preview (7.0.826.4) freezing in OSX 10.9.3

    Dear Apple Experts About a week ago my preview program has not been working properly.  Whenever i try and put text into my pdf documents the preview program shows the 'spinning wheel of death' at the point of saving-(sorry i don't know what else to c

  • Ipod crashes all the time

    why does my ipod crash all the time maybe I am charging it wrong??  it plays a few songs and than says it needs to be charge?? please help

  • Some items in finder windows have gray dots after file names

    When I open a finder window for the current directory, some of the file name shave little gray dots after the file names, off to the right at the end of the name field.  What do they mean?  Mavericks 10.9.4 on a 2009 Mac Pro.