IE9 Page Setup Not Pulling from LaserJet P1102 Preferences

I am running IE9 on Windows 7 Home Premium with a LaserJet P1102 printer attached. Software and drivers are all current. I also have an Epson SX218 and Adobe Distiller 8 installed as printers.
When the Epson printer is set as the default, any changes I make to the printing preferences of that printer appear in the IE9 Page Setup, including the paper size -- especially the paper size (we use A4 paper here, not Letter), and orientation.
The same is true for Adobe 8 PDF and Adobe 8 PDF Converter -- preferences pass right through to IE9 Page Setup when either are set as the default.
When the HP LaserJet P1102 is set as the default, IE9 defaults to "Letter" and "Portait".
I have tried every possible configuration -- removing all printers, reinstalling just one, reinstalling all, reinstalling in a different order, changing the defaults, changing the preferences, warm booting, cold booting, different computers, and even additional printers from Canon and Epson -- and the results are always the same.
There is something about the HP LaserJet P1102 drivers -- and possibly other drivers -- that is not updating the registry correctly for IE9 to read it and it is therefore falling back to some sort of defaults (which I can't find, either).
It is very annoying that even when I have the HP LaserJet P1102 set as the default and the printing preferences set to A4, I still have to go into IE9 Page Setup and change the paper size to A4 in order to get the output to print correctly.
As a note, I believe the same problem may exist with Word 2007 -- it only prints correctly to A4 when the Epson printer is either the destination or the default. If the P1102 is the default and A4 is the preference AND I print to it from an A4 document to A4 paper, it is automatically shrunk down as if to be fitting on Letter-sized paper. If I set the Epson as the default with A4 paper as the preference and then select the P1102 as the destination with A4 paper, everything prints fine.
I would leave the Epson as the default with A4 as the preferred paper -- which would solve the problem, only we use the Epson for printing on Letter-size labels sheets and don't want to have to constantly change the print settings.
Does anyone have any suggestions as to how I can correct this problem with the HP driver so that printing preferences from the P1102 will properly populate page setup in IE9 (and possibly Word 2007)?

Tom, when you are printing are you setting the printing preferences to match what you are wanting the printer to do? This would be done through Devices and Printers by right clicking on the printer and changing the defaults through Printing Preferences.
Beyond this, if you have already set this up beforehand, the browser you are using might not be correctly interpreting the information and may be sending band data to your machine. I would recommend "uninstalling" IE9 which will replace it with IE8 which has better compatibility with devices and programs.
Let me know! And happy New Year!

Similar Messages

How do I change page setup print margins from Milileters to inches?

How do I change page setup print margins from Milileters to inches?

This has to do with selecting the paper size in the print setup. If you select a (European) paper format that uses millimeters then the margins are in millimeters. To get inches just select an American paper format.

Pages will not open from iCloud since Maverick update

Pages will not open from iCloud since Maverick update

I have a similar problem. I upgrated to Maverick a couple weeks ago and at that time I saw a very different appearance to my Pages documents, especially my book lists. Numbers appeared at the left side of the pages. All seemed well. Now the last few times I've tried to open those documents, I get the message that "YOU NEED A NEWER VERSION OF PAGES TO OPEN THIS DOCUMENT. YOU CAN DOWNLOAD THE LATEST VERSION OF PAGES FROM THE MAC APP STORE". I can't figure out how or why the version reverted back to the way it was. That message doesn't always come though. Some documents I can open but some I can't open at all. If I click LEARN MORE, I am directed to the APP STORE where I can buy Pages 5.0.1 for $19.99!!!!! What the heck is going on????? Am I going to have to pay for pages where Maverick was FREE.

**Help** Page Setup Printers differ from actual printer selected

Hi everybody I am an newbie to this forum so please be Gentle
i have an end user with a curious Issue in Adobe Photoshop Only, all other adobe packages correctly
The problem
User goes to print Selects his printer from the List
then selects page setup and up pops a with a different printer "properties"
does not happen to all printers in the list
I have confirmed the following
Printer Page properties are not listing the default printer.
is not isolated to one single printer from the list
Page properties produce different models from printer list
Happens under a restricted account and administrator accounts
Have tried re-installing package
Additional information
Computers are part of a Windows 2003 Domain
Computers are running Windows XP Sp3 and are Updated to current patched
This one has me Stumped.
Cheers
Frenchwalker

FYI, this is a user-user help forum, and while some Adobe personnel drop by here occasionally, you may have better luck contacting Adobe support directly.
Perhaps another XP user in a domain environment will see this message (now freshly bumped to the top courtesy moi) and let you know whether they see similar issues.
I have heard that with Photoshop CS5 a fundamentally different printing interface is being used by the application, and this has yielded a whole host of new printing problems, from color management issues to multiple copy settings not being honored until the second attempt to print. I don't know how much of this applies to XP though.
-Noel

The Report Server page comes up on local server, but the page does not open from clients

Hello,
The Report Server Page opens up just fine on the local server, but page does not open up from desktops and client PCs. SSRS is installed on a Windows Server 2008 R2 server and with SQL Server 2008 R2 SP2
Clients are using IE 11 and they see:
Oops! Internet Explorer could not connect to tumdv-fsql01
How can make this site accessible from clients?
Thanks
Paul

That did not work.
What port numbers specifically does SSRS use? I will check the firewall.
http://100.100.100.100/CengeaReports/Pages/Folder.aspx
When I add the IP Address and try the link again, IE says "This page can not be displayed". When I try the Fix connection problems, IE says:
"The website is online, but it is not responding to connection attempts."
Paul

Work Items are not pulled from SRM into SAP Fiori

Hi Friends,
We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
When I click on the same to go in, I am getting the below error.
A problem occurred while reading the data
Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition.
Tags edited by: Michael Appleby

Hi Sasi,
It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
Regards,
Amrutha

Page Setup not saved

I like my audience handouts and my speaker notes to be printed in Portrait rather than Landscape format. However, I am finding that Keynote does not save my page setup preferences: I change the Page Setup to Portrait orientation and then save my document, but the next time I open the document it is back in landscape format (even if I open a document that I just closed).
Any suggestions on how I can remedy this situation?

I could solve my problem. I had to import the CA certificate in "ACS Certification Authority Setup".

Default page setup not matching with document size.

working on Acrobat X 10.1.4, windows7 64bit, have created lots of boards in AI saved as PDF in Legal size but when opening to print thru Acrobat it always defaults to Letter, why cant Acrobat detect size? this is very annoying.
I did try using "choose paper source by PDF page size", same problem,
Can anyone please help me.
Thanks

Use Page Setup to set what you would like as defaults. Before clicking OK, choose Save As Default from the Settings popup. If you have more than one printer, I suggest selecting your default printer, as well.

Records not pulling from Pervasive database

We just recently upgraded to Crystal Reports 2008 from Crystal Reports 7. We have some reports that pull from a pervasive database. After some looking I found that in the reports that we have already made that I needed to set up a Btrieve database (It is pulling from a pervasive database) connection and update it and all the reports loaded fine. I was able to update all the reports that use this database and they all seemed to be working great. Now, a couple days later when we run the report it acts like it is pulling the information but never displays it. Once we hit the refresh button, it pops up with the parameters box, we enter the values and then at the bottom it acts like it is running thru all the records. Except saying 1 of 1 and 2 of 2...ending at 10 of 10 like it always has done before, it goes 0 of 1, 0 of 2...ending at 0 of 10.
I also go to the old version of Crystal Reports and it comes up with the same problem.
I tried redoing the connection, but that didn't help either.
Please Help!

I have finally had a chance to go to the computer with crystal reports to try your sql test. When I go to database menu the "Show SQL Query" is grayed out. So I am unable to select it. I tried this in design and preview view, with no luck.
I was able to play around some more to try to pinpoint the problem and here is a couple things that stood out to me. Maybe that will be helpful to you to help me determine my problem.
After running the report I went to Dependency checker and it came back with "Data Source: There was an unknown problem detected when checking table Vendor, on server M:\FB\AP\FILE.DDF. Please verify your report." and "Data Source: There was an unknown problem detected when checking table Invoices, on server M:\FB\AP\FILE.DDF. Please verify your report." I have verified my database under the database menu and that has always come back with database updated. I never did see a verify report button to do what the error message says.
The other thing is I found what parameter is causing me problems. There are 4 parameters..status, month, day, year. In status we always put S, but the values in that field could be S, C, or X. If I change the status to the C or X, it will pull and display data. So, I initially thought they maybe there was not "S" that is statisfying the rest of the parameters. However, after looking thru the reports in the program this database was made for and using, there is in fact "S"s that would satisfy the rest of the parameters and should be showing this data.
So my next question why would the report run correctly for some values but not others?

New installations not pulling from Adobe Update Server?

Hello,
I have an Adobe Update Server v3 running on a Mac 10.7.5 that is working fine for 5 Macs in our office.
This weekend I nuked one of the Macs and installed the OS fresh as the machine was having terrible crashing problems.
After installing the OS fresh and installing all OS updates, I
- downloaded the Creative Cloud App and installed it
- put the overrides file where it needs to go.
But all the Apps still pulled from Adobe's servers instead of our own. Is this by design? Is there something different I need to do for initial installations so I don't kill the internet bandwidth and my sanity waiting for the downloads to happen?
Thanks,
-John

Hi @keatonj
I am nearly certain we can fix this quickly!
Please leave the printer on and unplug the power cable, then shut down the computer for a minuter, please do don't do a restart, do a full shut down. Then plug the printer back in, turn the computer on add the printer!
I trust this will do the trick
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Dial-In Conferencing page does not open from Lync 2013 client

Hello Everyone,
I am facing this strange issue with my Lync Clients. All the users started experiencing the same behavior. So, I think this has something to do at the Server side.
Earlier, when trying to open the Dial-in conferencing settings from the Lync Client (Tools --> Dial-in conferencing settings), it would automatically open the Dial-In conferencing settings in a new web page. But, recently this is not happening. The strange
thing is I will be able to open the dial-in conferencing settings manually from a web browser by typing in the URL.
Has anyone experienced similar issues in the past? I would appreciate any ideas regarding this from your part so that I can try to resolve this. Thanks in advance.

Hi,
Try to rerun Step 2-Setup or Remove Lync Server Components and then test again.
Check if Lync Address Book update to the latest status.
Make sure all Lync 2013 client update to the version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Sound setup not available from setup disk

System under discussion
AMD Athlon II x3 450 Regor 3.2 Ghz
MSI 880GM-E41 mainboard
Kingston DDR3 Hyperx/fb 2x2Gb
Maxtor 100G HD
Logisys 480w Power supply
corded mouse
corded keyboard
using onboard video by ATI
The setup disk has several things greyed out on it. I was able to establish lan communication and get the video drivers since those icons were lit.
But I have not been able to open the install icon for Audio.
On this XP install, even the usual start > all programs > entertainment > mixer
doesn't find the device. The error says go to Printers and other but all that does is ask for or show a printer.
What I want to do is establish that Line In is working to play audio.
Is there an alternative location to get Sound drivers for this board and its audio?

Quote
Now maybe someone can explain to me where the MSI Control Center, "the most user friendly software ever in system monitoring overclocking and power saving" is?
Over these weeks, I've never seen it anywhere.
If you really want to use it, and its not essential, you can download it from here:
http://eu.msi.com/product/mb/880GM-E41.html#/?div=Utility&os=All
Quote
One detail I did not mention in this discussion was the barrier I had in installing the hdaudio driver given higher up in this thread. I ran the package and in previous instances the error message came back that the wizard was looking for something with a different name and this caused all the delays in solution.
Obviously you didn't read the instructions clearly in the FAQ article I linked to. It mentions nothing about running an .EXE file (though true there is one in the attached ZIP file).
Quote
1) I have attached the HD Audio bus driver from the KB888111 hotfix to this article (see below).
2) Download and extract the files to a handy location (eg C:\HDAudioBus)
3) Open Device Manager, search for the Unknown PCI device
4) Right click on the Unknown PCI device to update the driver
5) Point the driver path to this C:\HDAudioBus folder, or wherever you may have extracted the files
6) The UAA audio bus driver will be installed

Page animations not happening from ID- Acrobat.

Hello,
I've got a 67-page InDesign document and there are about 20 pages therein that have animations. It's a custom animation I made where a chunk of text is simply enlarged 160%. I named the animation and used the same one for all these 20 pages. Anyway, I make a PDF from this InDesign file. I choose PDF Interactive, not Print. But, in the resulting PDF, those pages are simply displayed as is with no animation. I've told the animations to execute upon "page load."
Thanks,
Peter

InDesign animations are supported only if you exported as SWF. You can kind of use them in PDFs, if you export your animations as SWF, delete original animation and place that SWF instead. Then you will see your animation also in interactive PDF.
You may want to use new export selection feature when you export your animation as SWF.
Or then publish your file as SWF... you will get lot´s of other benefits too. And if InDesign´s native features are not enough for you, try eDocker for extending them.... (sample >>)

I have a question for you. How can i print only a few pages (so not everything) from a bookmarked page? Please send your answer to peterdoornaar@***.nl THANKS !!!

I bookmarked a website and wanted to print it. It is about a book. Somehow firefox crashed, and recovered. Now i want to print the the last 8 pages but it prints EVERYTHING AGAIN. I tried copying and pasting, didn't work. I really hope you can help me.
with regards
Peter Doornaar
''no email support from forum threads, all responses are posted here in the forum''

The option should be visible here: http://support.mozilla.com/en-US/kb/Printing%20a%20web%20page#w_print-window-settings
Print range section - Lets you specify which pages of the current web page are printed:
* Select '''All''' to print everything.
* Select '''Pages''' and enter the range of pages you want to print. For example, selecting "from 1 to 1" prints the first page only.
* Select '''Selection''' to print only the part the page you've highlighted.
Does it work for you?

Oracle APEX page is not working from cloned APPS

Dear Gurus
The APEX page is working fine in our PROD APPS, but having done the successfull cloning of APPS, now if we try to access the APEX page , it is not coming up, is there any config change we need to make???
following is the APEX which is working fine...
http://appsprod.test.com:7778/pls/apex
and following in cloned APPS is not working at all....
http://clonedapps.test.com:7778/pls/apex
please help to resolve this issue..........
thanks

Hi
What is being recorded in your Apache log files (I'm using you're using Apache due to the port number you have)?
Remember, the more information you can give us the better armed we are to help you.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

IE9 Page Setup Not Pulling from LaserJet P1102 Preference​s

Similar Messages

Maybe you are looking for

IE9 Page Setup Not Pulling from LaserJet P1102 Preferences