Records not pulling from Pervasive database

We just recently upgraded to Crystal Reports 2008 from Crystal Reports 7. We have some reports that pull from a pervasive database. After some looking I found that in the reports that we have already made that I needed to set up a Btrieve database (It is pulling from a pervasive database) connection and update it and all the reports loaded fine. I was able to update all the reports that use this database and they all seemed to be working great. Now, a couple days later when we run the report it acts like it is pulling the information but never displays it. Once we hit the refresh button, it pops up with the parameters box, we enter the values and then at the bottom it acts like it is running thru all the records. Except saying 1 of 1 and 2 of 2...ending at 10 of 10 like it always has done before, it goes 0 of 1, 0 of 2...ending at 0 of 10.
I also go to the old version of Crystal Reports and it comes up with the same problem.
I tried redoing the connection, but that didn't help either.
Please Help!

I have finally had a chance to go to the computer with crystal reports to try your sql test. When I go to database menu the "Show SQL Query" is grayed out. So I am unable to select it. I tried this in design and preview view, with no luck.
I was able to play around some more to try to pinpoint the problem and here is a couple things that stood out to me. Maybe that will be helpful to you to help me determine my problem.
After running the report I went to Dependency checker and it came back with "Data Source: There was an unknown problem detected when checking table Vendor, on server M:\FB\AP\FILE.DDF. Please verify your report." and "Data Source: There was an unknown problem detected when checking table Invoices, on server M:\FB\AP\FILE.DDF. Please verify your report." I have verified my database under the database menu and that has always come back with database updated. I never did see a verify report button to do what the error message says.
The other thing is I found what parameter is causing me problems. There are 4 parameters..status, month, day, year. In status we always put S, but the values in that field could be S, C, or X. If I change the status to the C or X, it will pull and display data. So, I initially thought they maybe there was not "S" that is statisfying the rest of the parameters. However, after looking thru the reports in the program this database was made for and using, there is in fact "S"s that would satisfy the rest of the parameters and should be showing this data.
So my next question why would the report run correctly for some values but not others?

Similar Messages

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Number of records being pulled from OLAP/ SQL in BPC 5.1

Hello BPC gurus,
                     We are experience performance issues with EVDRE.basically the report errors out and the error log states " Decompressing request failed". We are in BPC 5.1
       We were trying to understand how many number of records the evdre is pulling from from OLAP / database so that we can look into some fine tuning opportunities of the EVDRE.
      In the BI world we have RSRT where in which we can view the number of records from database, number of records transferred. Is there any such feature in BPC, where in which we can information on record counts.
We have turned on the error logs , but none of them give us an idea of the record count.
Appreciate your help in advance.
Thanks
sai

Hi Sorin,
               Thank you very much for getting to me on my clarificaiton on the record count. As per your suggestion, we have already looked into this OSS note, and changed the entries in the table. After making these changes, the queries that normally execute in 1 min, now take 30 minutes to complete. Believe this was the observation also in some of the threads related to this issue.
You had mentioned that there might be an issue with the communication between application server and BPC Client. or SQE generating MDX query. Can you please give us some pointers on how to investigate this. Have turned on error logs evdataserver_debug.txt & EVDATASERVER_TRACE.txt on the file server, but i believe there is an OSS note 1311019, that talks about these logs not workign with SP9.
If you can guide us in the folllowing that would be helpful
1 how to bebug this issue that we are currently facing.
2. How does the concept of compressing / decompressing work in BPC.
Thanks
sai

Info record not updated from PO , PO updated from Info record

Dear Gurus,
I want to restrict Base price in PO will be copied from Valid info record. User does not permitted to change the Base price once info record not maintained.
Kindly tell me the configuration steps to adopt the process ?
I don't want to update infor record from PO also.
I know while making PO i can untick infor record not update, but that is user specific.
Thanks in advance
With regards
SD

Dear Sidi,
Thanks . Problem solved.
When info record is maintained the price condition will get from there. for this change in condition type P001 , set "D" in manual entries column.
When info record is not maintained, then the system will try to get the price from last PO, if not present, it will throw an error u201CNet price must be greater than 0u201D and sets price condition PBXX (manual entry) to manually enter the price you want.
What you can do:
Is make the condition type P000 as automatic only (option D as below) and also same for condition type PBXX.
Regards
Soumen

Work Items are not pulled from SRM into SAP Fiori

Hi Friends,
We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
When I click on the same to go in, I am getting the below error.
A problem occurred while reading the data
Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition.
Tags edited by: Michael Appleby

Hi Sasi,
It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
Regards,
Amrutha

Binding a JSF table to a list of data that does not come from a database

Retrieving data from a database I can just use the jDev wizard to "Create EJB from table" and bind the EJB to a JSF table through a NamedQuery.
However, in this instance I am retrieving a list of data from an existing API or a WebService.
Does anyone have a good example of how best to do this?

Hi There,
I have make change as you suggested in your post.
But I am getting error that "org.apache.jasper.el.JspPropertyNotFoundException - /presale.jspx(86,56) '#{saveData._nameList}' Property '_nameList' not found on type dbtransaction.SaveData"
Where list is nameList which simply fetch data from Database and send it to the table
Here is my jspx code.
<tr:table var="row" value="#{saveData._nameList}">
                              <tr:column>
                                   <f:facet name="header">
                                        <tr:outputText value="Name" />
                                   </f:facet>
                              </tr:column>
                         </tr:table>
I have just create one ArrayList object in Backing bean i.e. nameList and put getter setter functions for it.
Please help me out for this issue.
Thank You,
Navnath

SUN application server does not read from Derby database

Hello,
I have developed a simple web application in SUN Java Studio Creator 2, and deployed it to the SUN App server 8. It uses a database (PointBase) for some table lookups. It all works OK on my development system. When I try and run the same web application on Production (Sun Java System Application Server Platform Edition 9.0 (build b48)) , with the Derby database, I cannot get it to work. The application looks OK, all web pages get displayed correctly, but none of the fields and tables show any data from the database tables.
The "ping" command from the admin screen in the app server to the Derby connection pool is successful, and there are no error messages in any logs, it is just that the data from the tables does not get displayed on the web pages. Very strange.
At first I thought it was a database issue, so I ported the database to mySQL, but the problem was not fixed. In development the web application works OK, but on production the data in the tables do not get displayed.
Anyone has any ideas?
Thanks!!

Are you able to access the data in the tables using standalone java client. ( java program through JDBC api )
Can you post the code snippet of getting connection ( URL, other db parameters)

Condition record not pulled for all material

Hi,
I have three materials in sales order. now, for each material , I am maintaining some condition record in VK11. the problem i face is, if in case I don't maintain condition recrod for condtion ZCD1 for the first material A in sales order, the condtion records that I have maintain for the same condtion ZCD1 for the following materials are also not getting pulled. that's true for all conditiond in my pricing procedure. only those conditions for which system could find records for the first material, it pulls it for all other materials that follow material A in sales order. otherwise, system gives the messgae " condition record has been found but not set "
what could be the reason? this is certainly not the standard behavior.
Thanks,
Binita

I have checked this with creating new records for all material for all condtions. but, it is possible that a particular price condtion may not be maintained for the first material and which can very well be maintained for the folllowing materials. in that case, they are not pulled. the records are there for sure for other materials as 1) i could see them in VK13 and 2) the condition analysis tells me that condtion record is found but not set. no clue what it has got anything to do with first material..as soon as i maintain that condtion for first material (even zero value in Vk11), they start appearing for other materials as they are maintained.
Thanks,
Binita

Some records not transfer from ODS to infocube

Hello BW folks ,
We have an ODS which stores the various sales doc. types.
We are transfering all the data from this ODS to infocube. We do not have any routine or filter conditions while loading data from ODS to infocube.
In the update rules of infocube we do not have any routine written .
Also no start routine is present in Infocube.
The data is loaded successfully from ODS to infocube.
But still a particular 'sales doc type' is not transfer from ODS to infocube.
While this 'sales doc type' is present in ODS.
The Sales doc type is maintained with respect to the Ordernumber. So If I check the Ordernumber of that sales doc type in ODS then the same Order Number is not present in infocube.
Means some / few Ordernumbers also getting deleted while transfering data from ODS to infocube.
We do not have any object in update rules as master data attribute of.
Please suggest me what to do in this case.
Amol.

hello VC,
I have checked that in ODS update rules , for key figures we have update type as Addition and the data from ODS to infocube is INIT and then delta.
Is this the reason for Overwritting the particular sales doc type ?
I thing we should do full upload only from ODS to infocube in this case.
Regards,
Amol.

New installations not pulling from Adobe Update Server?

Hello,
I have an Adobe Update Server v3 running on a Mac 10.7.5 that is working fine for 5 Macs in our office.
This weekend I nuked one of the Macs and installed the OS fresh as the machine was having terrible crashing problems.
After installing the OS fresh and installing all OS updates, I
- downloaded the Creative Cloud App and installed it
- put the overrides file where it needs to go.
But all the Apps still pulled from Adobe's servers instead of our own. Is this by design? Is there something different I need to do for initial installations so I don't kill the internet bandwidth and my sanity waiting for the downloads to happen?
Thanks,
-John

Hi @keatonj
I am nearly certain we can fix this quickly!
Please leave the printer on and unplug the power cable, then shut down the computer for a minuter, please do don't do a restart, do a full shut down. Then plug the printer back in, turn the computer on add the printer!
I trust this will do the trick
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Dynamic table pulled from SQL database, Need to Search

My table results are not static, they are pulled into a
dynamic table from a SQL database. Each table displays 10 records
with an option at the bottom to display additional records
(next/previous), for my query. I also have an option set up to
allow users to click for a detail view of a record in the table. If
the table data was static, I would be able to set up a search
option and a results page for it, but I'm dealing with dynamic data
on an .ASP page. I'd like to set up a search box to limit the
records displayed in the table. I haven't found any code samples
that are designed for dynamic data.
Here is a copy of the code from my table.

Hi,
I think the code on this URL will get you the solution
http://www.asp.happycodings.com/Array/code3.html
Cheers,
~Maneet

Delta Records not coming from sm13 to rsa7

Hi,
We have found that for the application 02, delta records are coming in RSA7(delta queue) even if these are coming in sm13.
It appears that some protocol responsible for bringing the delta records from sm13 to rsa7 is failed.
Fact is that for the data sources related to application 02 (purchasing: LO Cockpit), we did some enhancements through LBWE.
But before transporting the relavant requests to production, we did not delete sm13 and rsa7 entries and also at the time of transpoting the requests in production, postings were made by several users and the entries for those were appearing in sm13.
Thing to notice is that whatever fields were shifted in LBWE, those changes have successfully appeared in production after transporting ( LBWE and relavant Extract Structure in Production are containing the required changes)
Now each time to load the data in BW, we have to delete and refill the set up tables and schedule full update which is taking a lot of time and not advisable.
Each time when we are running job control in LBWE, it is throwing dump in ST22 with the heading CONNE_IMPORT_WRONG_STRUCTURE.
It appears that some internal problem has occured in the structure of rsa7/sm13 for application 02.
Also it is written in the dump that:--
When attempting to import data, the structure of the complex object
"MC02M_0ITM_TAB"
was not compatible with the target object. The error occurred with
component no. 24.
Try to find out why the structure of the object is unsuitable.
There are several possible reasons:
|
--- In the ABAP Dictionary, the structure of the imported
|   object has changed. Make sure that the structure of the imported
|   object matches that of the Dictionary structure.
|
|   If the data could not be restored from another source, this data
|   must be read with the "old" structure, then converted and exported
|   back with the new structure, so that future IMPORTs always work
|   with the new structure.
|
--- A new program version is active, and it no longer matches the
    dataset. Try to solve the error by generating the program "SAPLMCEX" again
    as follows:
    In the SAP System, choose the transaction SE38. Enter the program
    name "SAPLMCEX". Then choose the "Activate" function.
Now how to make the things back on track so that delta records come in rsa7 from sm13 so that we schedule delta update in info package.
Is there any OSS Note or Standard SAP Report which we have to run for getting the solution.
If not, please suggest the solution.
Thanks in advance,
Tarun Brijwani.

Hi,
1. Check whether your Extractor will support Early Delta Inti or not..
See this link for Early Delta Initia...
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Minimize downtime for delta intia..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
Perform this activity on Weekends,
Also see 436393 - Performance improvement for filling the setup tables
Note 753654 - How can downtime be reduced for setup table update
2. Obviously Background job.
BG jobs can be monitored thru SM37 and maintain Logs thru SM21 and can be easier for administration
Thanks

Can you schedule a report to send to a email address that is pulled from a database field?

Post Author: huber.molly
CA Forum: Crystal Reports
Currently, we are collecting email addresses in a database field. We want to send the generated reports to only these email addresses. Is there a way to add a dynamic value to the "To:" field when scheduling a report?
The goal is to schedule the reports and let them be sent to these addresses so it removes the step of manually entering the addresses.

Post Author: IdoMillet
CA Forum: Crystal Reports
It's not clear what tool you are using to schedule your reports.This may require a 3rd-party tool. See list of such tools at: http://www.kenhamady.com/bookmarks.html. My Visual CUT software allows you to drag & drop an email field/formula from the report itself into the "Email To" option, to dynamically drive email options by the data in the report. Alternatively, it allows you to use an SQL Query or a Text file to specify email addresses.- Ido

Determining what site(s) has not refreshed from master database

Is there a way to determine what sites have refreshed at the master level ? Is there a system table or v$view that contains this information ?
I have a master read-only snapshot setup with an oracle 8i master and oracle 8.04 snapshot sites(54). I want to prevent my mlogs from getting too large and determine which sites have not refreshed as an aid to keeping the system healthy.
Any hints/help/pointers to documentation will be greatly appreciated !
Thanks in advance !
Darrell

hi
Working with flex involves learning at least 2 languages, the
flex language both mxml and actionscript and usint it in a
combination, but to have a dynamic site you also need to know a
backend language like C# or VB.NEt, PHP , also is useful to know a
little about Databases, because if you want a dynamic site it will
involve data for sure and where do youget data from? A database.
You will build much of your site in actionscript that is a certain,
because mxml is very good but itself is not sufficent to do
everything you want.

IE9 Page Setup Not Pulling from LaserJet P1102 Preferences

I am running IE9 on Windows 7 Home Premium with a LaserJet P1102 printer attached. Software and drivers are all current. I also have an Epson SX218 and Adobe Distiller 8 installed as printers.
When the Epson printer is set as the default, any changes I make to the printing preferences of that printer appear in the IE9 Page Setup, including the paper size -- especially the paper size (we use A4 paper here, not Letter), and orientation.
The same is true for Adobe 8 PDF and Adobe 8 PDF Converter -- preferences pass right through to IE9 Page Setup when either are set as the default.
When the HP LaserJet P1102 is set as the default, IE9 defaults to "Letter" and "Portait".
I have tried every possible configuration -- removing all printers, reinstalling just one, reinstalling all, reinstalling in a different order, changing the defaults, changing the preferences, warm booting, cold booting, different computers, and even additional printers from Canon and Epson -- and the results are always the same.
There is something about the HP LaserJet P1102 drivers -- and possibly other drivers -- that is not updating the registry correctly for IE9 to read it and it is therefore falling back to some sort of defaults (which I can't find, either).
It is very annoying that even when I have the HP LaserJet P1102 set as the default and the printing preferences set to A4, I still have to go into IE9 Page Setup and change the paper size to A4 in order to get the output to print correctly.
As a note, I believe the same problem may exist with Word 2007 -- it only prints correctly to A4 when the Epson printer is either the destination or the default. If the P1102 is the default and A4 is the preference AND I print to it from an A4 document to A4 paper, it is automatically shrunk down as if to be fitting on Letter-sized paper. If I set the Epson as the default with A4 paper as the preference and then select the P1102 as the destination with A4 paper, everything prints fine.
I would leave the Epson as the default with A4 as the preferred paper -- which would solve the problem, only we use the Epson for printing on Letter-size labels sheets and don't want to have to constantly change the print settings.
Does anyone have any suggestions as to how I can correct this problem with the HP driver so that printing preferences from the P1102 will properly populate page setup in IE9 (and possibly Word 2007)?

Tom, when you are printing are you setting the printing preferences to match what you are wanting the printer to do? This would be done through Devices and Printers by right clicking on the printer and changing the defaults through Printing Preferences.
Beyond this, if you have already set this up beforehand, the browser you are using might not be correctly interpreting the information and may be sending band data to your machine. I would recommend "uninstalling" IE9 which will replace it with IE8 which has better compatibility with devices and programs.
Let me know! And happy New Year!

Records not pulling from Pervasive database

Similar Messages

Maybe you are looking for