If I have a 4 decimal values in a field, then I want 2 only on the output.

Hi,
If I have a 4 decimal values in a field, then I want 2 only on the output of the smartform. what I have to do. Also I have to condense the value of that.
Thanks,
BSV

Hi,
Define one packed number with 2 decimals and move the four decimals number to decimal 2 variable.
Ex:
Data:P(13) type P decimals 2,
t(13) type P decimals 4.
P = T.
write P.
Thanks ,CSR.
****Please reward if helpful.

Similar Messages

OAF PO Page Entry - User enter value in particular field - Then want to check it should be unique othewise Message

OAF PO Page Entry - User enter value in particular field - Then want to check it should be unique othewise Message must be displayed so that user will select the non unique value in the entry filed. Please let me know will it be possible using personalization? Or I have to customize the controller extend it?

Hahaha..
Every tools have its own pros and cons.. There are much more things which you do in OAF (which is a web based solution) which you can't even imagine in Forms
Cheers
AJ

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
Usually, you should do like this:
- while in win, restart
- immediately after chime, press option or alt key
- wait for 2-3 seconds, you should see the boot options
- select Mac OS partition
If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
Thanks

CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon

HT203167 I have a few songs that I purchased from iTunes store that now only play the first 2 or 3 words of the song. How do I get the whole song back?

I have a few songs that I purchased from iTunes store that now only play the first 2 or 3 words of the song. How do I get the whole song back?

Hello hmcc44,
You may need to delete the items from your iTunes Library, then redownload them.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/HT3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If the issue persists beyond that point, I would recommend reporting an issue with the tracks to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

How to check decimal value in numeric field

Is there any way to find number of decimal digit is being used.
999.444
444.45
344.23
33.666666666666
Query provide rusult after the decimal value.
thanks.

user-Keen wrote:
Query provide rusult after the decimal value.
thanks.
your_col - trunc(your_col)Do you have negative numbers?
For negative values what do you want to display?
If just the decimal part, you could use ABS(col) - trunc(ABS(col))
Edited by: jeneesh on Apr 4, 2013 3:29 PM

Decimal values for a field in ALV

Hi,
I created an ALV report.
It has a field which will display the calculated value as '103,839,389'. This should be dispalyed as '103,839,389.00' with decimal value, I mean with 2 decimal places, how can this be achieved?
Thanks,
Kumar

hi check this..
use these in populating the fieldcat..
it_fieldcat-decimalsfieldname = fieldname
it_fieldcat-decimalstabname = tabname
it_fieldcat- decimals_out = 2.
regards,
venkat

I have an iphone 4 (ios 4.3.1). I want to update to the latest ios, but it wouldn't load onto my iphone, I got error message code 3014. I tried again and it said I would lose all the contents on my iphone if I continued - help!

I have an iPhone 4 (IOS 4.3.1) and it was synced and backed up today.
I wanted to upgrade to the latest ios on iTunes (today's date is 3rd Jan 2013), it seemed to download ok (it took about 30 minutes or so), but when it tried to update onto the iPhone (I think this was what it was doing!) I got an error message that had code 3014 in it. Nowhere on Apple's website can I find a way to resolve this error code.
I then thought I would just try again from the beginning, but I then got an error message saying that if I continued I would lose all the contents on my iPhone so I cancelled it as I don't want to lose everything on my phone.
Can anyone help me as I am not very good at technical things and I really want to upgrade the ios on my iPhone without losing all the data I have on there already. An idiots guide would be great.
Thanks.

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

I have an issue syncing my iPhone 4 with itunes. This has only happened the last few times i have tried but don't know how to resolve it. Please help.

Hi, the last few times i have tried to sync my iPhone 4 to my itunes it won't work. I plug my phone into my computer, to sync any new pictures i have taken or add my new music i have bought on my phone, and hit sync. It appears to start syncing then an error message appears saying the following:
The iPhone 'my iPhone' cannot be synced. You do not have enough access privileges for this operation.
I'm not sure what this means or why this keeps happening. I have the latest iTunes and i have not done anything different. It appears to have wiped some of my music from my iPhone and a number of my photo albums off. Please can someone help or advise how i resolve this issue. Thanks.

When you set up iOS7 the second screen specifically asks that you create a four digit code .
That's what you now need to re-enter in your phone.
Once entered you can go to system/general/Passcode lock
Re-enter the same code and choose turn Passcode off
iOS 7 has been designed to enforce minimum passcode security by default or in the case of the new 5s use of finger print level security.

Since I have upgrade from Firefox 3 to 4 and then 5 I know longer get the Padlock or Keylock Icon indicating the needed a secure session when logging on to sites such as my bank account, what is the problem?

The padlock or key Icon that indicates a secure session no longer appears when I sign into a site such as my bank or any site requiring security for financial or other transaction. Since this security is no longer available in the Firefox browser, I use Internet Explorer for SECURE Browser functions.

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

Setting up a static value in a field then saving it

if i have the case of a field, and i add a dynamic action to set a static value for it (e.g. a status field and when accessing a certain form it should change the STATUS field to CONFIRMED as a static text), how do i make sure that this value gets saved into the database?
meaning, when i create the assigned form and set the dynamic action to display the status (as a display only field) as "confirmed", when pressing the apply changes button nothing happens and the CONFIRMED status does not get saved into the database.

Make sure the printer is at least 3 feet away from the router. Now try here.
Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
first if needed. More Wireless Printing help is here.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

I get an error message when I try to empty the trash in order to clear up an external hard drive. I had been using it for time machine, have shifted that to a larger external hard drive, and want to free up the space for photographs. Any suggestions?

What should I do when I get an error message (error code - 8003) when I'm trying to empty the trash to clear up additional space on an external hard drive?

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

I have an old iBook running 10.3.9 and I want to wipe/erase the disk and get rid of it. Problem is Disk Utility doesn't allow me to erase, it has everything grayed out. And I don't have the original startup CD. Any ideas?

Need to wipe 10.3.9 iBook with no OSX cd and disk utility not allowing me to do it.

You need to use an alternate system; this can be a Mac OS X install disk or a system on an external drive. If needed, buy one from a source such as Amazon or eBay, or phone Apple and ask if they have replacement original disks in stock.
(122593)

Hello i have ps cs6 already installed on my Windows pc, i Want now to do the Installation on my Mac book. Error wring Aktivation Code. Is it Not possible to Use both?.

Any Ideals?

A creative Suite license is only good for the type of platform it is assigned for (PC versus Mac). If you want to use a Windows version on a Mac you need to install some form of Windows emulator on the Mac.

If I have a 4 decimal values in a field, then I want 2 only on the output.

Similar Messages

Maybe you are looking for