If shutdown immediate hangs database waits one hour for shutdown abort

we have schedules cold backup for our 11g database on redhat 5.3.
there is a shell script written with shutdown immediate command.
If database hangs during shutdown immediate database waits one hour for auto shutdown abort.
but this happens once or twice in a month
can we do this auto shutdown abort earlier than one hour ??

user13376823 wrote:
we have schedules cold backup for our 11g database on redhat 5.3.
Since you're shutting down the database for cold backup so ensure it should be shutdown properly by shutdown or shutdown immediate cmd not by abort cmd.
Consistent backup:-
A backup taken when the database is mounted (but not open) after a normal shutdown. The checkpoint SCNs in the datafile headers match the header information in the control file. None of the datafiles has changes beyond its checkpoint. Consistent backups can be restored without recovery.
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmconc1.htm#i1007616

Similar Messages

HT1645 I did step 2 but my computer isn't giving me the pop-up in step 3 so i can't push an OK button. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no

I did step 2 in the "iDVD: Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.

You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck?

HT201317 I have been waiting 2 hours for photos in photo stream to upload

I have been waiting 2 hours for photos to go from my iphone 4s to photo stream so i can turn on iPhoto in my computer and view them. they still have not appeared. this seems ridiculous to me. Can anyone impart to me what i am doing wrong?

I have rebooted both the computer(s) and the iOS devices. I have checked to make sure the IDs that i am signed in to the cloud with are the same. I keep thinking it must be some mis-set preference but all the info i find about setting it up seems to suggest i have done that part right too. Very frustrating.....

I am having trouble with the email that is confirming my security questions, it says it has sent it to my gmail but i have checked the email account and nothing has been sent, i have waited 24 hours for it and still nothing

i am having trouble with the email that is confirming my security questions, it says it has sent it to my gmail but i have checked the email account and nothing has been sent, i have waited 24 hours for it and still nothing.

Hi Cara154,
If you are having issues receiving the email verification for your security questions, you may find the following article helpful:
When you provide a rescue email address during Apple ID creation, you will receive an email from Apple to verify that the email address provided is accurate. If you don't see an email from Apple asking you to verify your rescue email address, you may want to check your SPAM folder. If you still haven't received the email from Apple, you can sign in to My Apple ID (appleid.apple.com) to resend your rescue email address. To resend your verification email, click on Password & Security. Then, click the Resend link located in the Rescue Email Address section.
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

I need help because I can't read my redemption code on my iTunes giftcard and I can't wait 48 hours for a response via e-mail.

I need help because I can't read my redemption code on my iTunes gitfcard and I can't wait 48 hours for a response via e-mail.

How can i help you?

Workflow sending 20 email notifications every one hour for the same event

Hi Experts,
We had an issue on a clientu2019s prod system that the workflow triggered the same event 20 times in one hour. Later, a client has resolved the issue by removing the information from the workflow administration and reentering it back again. The workflow administration contains email settings, web settings, workflow roles, and active workflow maintenance. Although, the issue has been resolved but a client still needs to know how that happened. I would like to get some helpful opinions on how this happened because I am very new to the workflow. I would really appreciate your opinions.
Thank you
Don P.

Hi Sue,
Thank you for your response. I am not sure if the event has been triggered erroneously. The client told us that it didn't happen in the dev system when he tested it, but it only happen in the prod system. This project went live a little bit over a year ago without any issues, but it just happened the first on 6/22.
The event is about to notify the user to review a new incident report (EHS), and it's same event id for all 20 email notifications. We will a client to look into their system about how this event raised?, what does the event log reveal? and if he uses the event queue. Again, thanks for your response.
-Don P.

Appointments are showing off by one hour for Yahoo users

Ok, I know there have been a few responses to this, but none seem to fit the exact issue I am having, so I'm going to ask again.
I have two users in particular, one on Outlook 2010 and one on Outlook 2013. They have hosted Exchange, and the Exchange server is 2007. The Exchange host provider is located in the Central Time Zone. Computers for my users are all set to correctly to Eastern
Time Zone. Windows 7 and 8.1 machines with all updates installed are what the users are using. I also logged into the hosted OWA option and set the time zone to EST there as well.
When I send an invite from Outlook 2010 user to another Exchange server, meeting time in the email invite BEFORE accepting shows the correct time zone for that user, and stays correct when accepting. When I send an invite to Gmail, again, shows
correct time before and after accepting. When I send to a Yahoo account, it shows the time one hour behind before accepting - essentially shows the CST time. Once I accept the meeting in Yahoo, it shows the correct time in the Yahoo calendar, but the email
with the invite still shows the wrong time, one hour earlier. And obviously if the user doesn't accept the invite but just uses it as a guide, they will show up one hour earlier.
Is this an issue for Yahoo, or Exchange 2007? It might be possible to move my client from Exchange 2007 to 2010 or 2013, but I don't want to do that if it won't fix the problem.

Should be an issue with the time zone settings on all Outlook clients involved.
Has Gmail/Yahoo account mentioned here been configured into Outlook clients?
If you are using Outlook 2010 you need to use a time zone with the correct DST settings for your location. If your location does not observe DST, do not choose a time zone that does then deselect the option to automatically update for daylight saving time.
You need to use a time zone that does not observe DST.
http://www.slipstick.com/outlook/calendar/meeting-requests-and-appointments-are-off-by-one-hour/
Kapaal

WAIT ONE HOUR

THEN TRY AGAIN THERE ARE 7.0 BILLION PEOPLE TRYING TO CLICK ON THE BUTTON AT ONCE STOP CLICKING APPLE WILL RESLOVE THE PROBELM IF EVERY ONE STOPS!!!

Yeah, I'm going to have to leave my house soon so I stop clicking it... the assumption being that when people stop clicking, I can swoop back in and spend three hours downloading it (stupid fscking Bell Sympatico...)
Here's a question: how does waiting till tomorrow fix anything? All of us wake up at 0800 tomorrow, rush to our computers, and start downloading. Apple's servers crash again; mayhem ensues. Cycle continues until fifteen days have passed or until golden brown.

After 3 years, I got a new iphone5 and ran into the security question issue. Because of the questions apple chose, I have no idea what the answers are. I did the iTunes email thing and waited 36 hours for a response. I

After waiting the 36 hours, I received an email advising me. To contact a phone support number. After waiting 15 minutes on hold, the helpful person asked me for the answers to the security questions and said that answering them was the only way to reset the questions. I said, WHAT? You don't see any cyclic logic there? Apple (the inovator!) has not foreseen this? I was livid. I was advised I could leave a comment on Apple.com. I think I'll leave my comment on every Apple contract that crosses my desk. I'm IT Systems at a large US university. If anyone from Apple wishes to address this, PM me.

Thanks! I'm a little leery of attaching a credit card to itunes again because of all the apple database jacking in the past. I had a bunch of unauthorized purchases charged to my account for devices that I never owned. Took me weeks to replace the credit card even though it was never compromised but apple was impotent to fix the issue. On this issue, I finally got the working key to the system. Even though there are BAZILLIONS of ways to verify a person's identity via two forms, using the security questions forgotten as one of them seems to be circular (failed) logic. Seriously, it's like requiring someone's password to reset a forgotten password. My take on the issue fixed by this workflow, that I noticed from the 3 sets of calls and 20 minute wait on each is this.... iTunes was racked by all the fraudulent purchases I (and thousands of others) experienced and people (like me) had to go through all the credit card issues because Apple "would not" fix the issues in iTunes and pursue the fraudulent purchasers (even though Apple had the device IDs!). So we ripped out our credit card info in iTunes. On this security question reset issue, if they can require people to re-enter their credit card info under the guise of "identification ...because your security is so important!) and then take 60 minutes to create a high intensity customer interaction, there is a high probability that the average customer will temporarily forget all about removing their credit card info. It's actually brilliant! ...but very underhanded.... but also very Apple. I don't expect this reply to have a long life-span, but thanks for your response. If I can log into iTunes, I can add any credit card. therefore IF I CAN LOG INTO ITUNES APPLE HAS THE SECOND METHOD ALREADY! Thanks.

I waited one month for purchasing a BROKEN laptop of Lenovo!

Hi everyone,
I have placed a U310 laptop last month.
For some strange reasons, this laptop has been sent to Lenovo warehouse and it takes around another two weeks for me to get it!
However, when I opened the UPS package received yesterday, then I found
THIS LAPTOP HAS A BROKEN TOUCHPAD! please enjoy pictures. Is this the laptop I waited for more than one month!? **bleep**!?
Link to picture
Link to picture
Now, what makes more me angry is the retarded Lenovo service.
The story is, I need to wait more than half hour to get online representative, then they will tell you to call someone.
That takes another half hour! So, after I fininshed this, I am still waiting for this POST SALE TEAM answering my phone.
I am sorry I cannot afford so much time on this.
Here is Order Number - 4242135568. Hope someone comes to help me with this.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

haha **bleep**. i wonder how that happened with the lid down.
that's what you get for have extra fancy glass trackpad.
Y580 3610qm

HT201263 ok, I did the above, and I waited 2 hours for this to download the "update." Then I try it again on the ipod, and it starts to redo the same download all over again !

I started the update, and in the middle of it, the same previous screen pops up that it can't connect to the ipod,and the ipod screen goes back to "disabled." I waited it out, let the download finish. Then I had to try the process over again, and it started the download all over again, even though I just did that. Another two hours??? This is driving me mad. All for a stupid password ! How do I reset this dang thing, so I can open it. Bad enough I have to re do everything, because I have to restore it. PLEASE HELP !
Just wanted to add that apparently the ipod is disconnecting and reconnecting to the computer somehow. I know because when you plug in the ipod, the computer makes a noise, as with any hardware. Well I click on "restore," agree to the restore, then it starts to download the update. A few minutes later, I hear the computer make the same noise, as if I have disconnected the ipod, even though I haven't even touched the cord. Then it makes the sound again, as being reconnected or plugged in, then the message pops up that it can't be connected, because a password has to be entered. The ipod screen then goes from the restore picture ( the itunes logo with usb cord) to the same "disabled, connect to itunes."
I am not trying a different cord and seeing if that helps the plugged in portion.

Do a manual install using the instructions here.
have you download the update/firmware, place the iPod in recovery mode and then update/restore using the instructions in the article.
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Is there anyway to not wait 24 hours for your payment plan to be updated

Hi,
I recently updated the payment details for my Creative Cloud plan since it's been a year and it has expired. I was wondering if it is possible to somehow override the 24 hour waiting period since I have a very pressing deadline.
Thanks

Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Been waiting an hour for my iphone 4 to activate....

So i called to activate it, it said turn it off for 5 minutes and turn it on. i did so and nothing. then it deactivated my iphone 3gs and i have no phone. And due to a crazy problem with my imac i dont have ios 10.5 right now. Should my phone just turn on and work or do i need to sync it first? Should i just wait for a text saying its working? Turn the iphone 4 back off? Help!!!

You are wrong.
Copied from AT&T:
"In order to activate your iPhone and utilize the entire suite of features included in your service you MUST follow these steps IN ORDER:
Step 1 - Charge your iPhone.
Step 2 - Download and install iTunes.
Step 3 - Connect your iPhone to your PC or MAC and follow the instructions on iTunes.
Step 4 - Activate your iPhone online at att.com/Activations or by calling 1-866-895-1099 from another phone.
• Be ready to give the wireless number you want to activate, the account holder's SSN and shipping ZIP code.
Step 5 - Turn your new iPhone ON and make a test call."

HT201210 I FORGOT MY PASSCODE FROM MY IPOD TOUCH 5G AND I CONNECTED MY IPOD TO MY LAPTOP USING THE USB CABLE THAT CAME WITH THE IPOD.....I WAITED 4 HOURS THEN IT SAID ERROR. IM LIKE WHAT I WAITED FOUR HOURS FOR NOTHING... AND IM NOT GONNA HAVE AN IPOD AN

Please what do i do to unlock my ipod passcode i forgot!

iHelper 007, the poster said he tried to restore and go an error.

DROPINDEX in process chain takes nearly one hour fo a single cube

Hi there,
does anyone has a suggestion, why a DROP INDEX takes nearly one hour for a single cube ? Ok, the cube contains a lot of uncompressed data, but could this be the only reason?
Kind regards
Stefan

Hi Stefan,
Uncompressed request definately is one of the reason but there could be another possibilites:
1) Incosistency in cube, do the RSRV test on the cube and remove the inconsistency if there is any.
Call transaction RSRV.
- Choose "All Elementary Tests" - "Database."
- Double-click the line "Database Information about InfoProvider Tables."
- In the window on the right, choose "Database Information about InfoProvider Tables."
- Enter the InfoCube name and choose "Execute Tests."
- After the analysis finishes, choose "Display Messages" and open the analysis tree with the correct time stamp.
If the figures displayed seem unreasonable, this may be because the optimizer statistics are not up-to-date.
2) Check in DB01 are there any locks on the system while indexex are droped.
3) Most important and very usual reason is Database parameters.Ensure you you follow SAP recommendations for Database parameters for example if you are using Oracle 10, check for SAP Note 830576 and execute the report mention in this note (do not forget to change the text for OLAP as mentioned in Note)
4) Statistics should be updated also as sometimes this causes high time while droping indexes.
5) You can also do an St12 trace or St05 trace to check where the time is going.

If shutdown immediate hangs database waits one hour for shutdown abort

Similar Messages

Maybe you are looking for