If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.
If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.
Hi,
Each and every tool has its own flexibility to run. Coming to your question, the use of dashboards is to view the data by more interactive other tool cannot comprise it. when you say, if i want to develop the same sort of requirement in other BO tool, then you need to check with positive and negative of the tool to accommodate your logic.
--SumanT
Similar Messages
-
I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?
iTunes is quite friendly, and very powerful.... You probably just need to set up automatic syncing in iTunes.
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select the iPod there.
To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This setting enables automatic syncing for music. If your iTunes music library is small enough to fit on the iPod's storage, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. From the lists below, select (checkmark) what you want to sync to the iPod.
Here's one convenient way to set this up. In your iTunes library, create one or more playlists. Add the ALL the songs you want on the iPod to those playlists. OR, you can use existing playlists. Back on the iPod's Music screen, select those playlists under Playlists. (You can select other items on those lists, if desired.)
When you click Apply, the songs in your selection sync to the iPod. Going forward, to update your iPod (add/remove songs), just update those playlists in your iTunes library. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates the iPod with the same changes.
NOTE: On the bar of buttons that starts with Summary, click on the other buttons (such as Movies, Podcasts, Audiobooks, etc.) to set up syncing for those iTunes media categories. -
There is no selected print page range in the print box. Only selected PDF file and all PDF files. Any suggestions?
Well, I looked for where to delete this but didn't see it.
NEVERMIND; I forced iPhoto to quit and restarted and everything seems fine.
BTW, I did get one thing wrong. When I looked at both iPhoto libraries with FINDER, the active one and the archived one both showed content as far as file size goes.
It was because I was viewing the files through Adobe Bridge that it was showing 0 GB's; for whatever reason. -
If someone has wiped my ipad and changed passwords on icloud how do i get my data back
if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks
How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it? -
HT4009 someone has used my account to buy a product how can i get a refund
someone has used my account to buy a product how can i get a refund
Contact iTunes Customer Service and request assistance
Apple Support iTunes Store Contact Us -
My keyboard failed to put accents spelling.
Through the system can not recognize the keyboard. This keyboard has one year and has always worked well and suddenly became this way, what to doHi ,
Do you remember if you have installed some software prior to this issue?
Delete programs you never use.
If the issue reoccurs in Clean Boot, but works fine in Safe Mode, the cause may be the disabled hardware drivers. You may narrow down the
causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices
such as video adapter are not available to be disabled.
Tracy Cai
TechNet Community Support -
Someone has used my id to purchase an app .how do I cancel payment
i have been contacted by Apple that someone has used my id to purchase an app . How can I cancel payment u
I checked my purchase history and it wasn't there I was very suspicious when they asked for my bank details and apple already have it.The worrying part it did not come in my junk mail it was in my inbox marked 100% secure.
Many thanks -
I have recieved an e-mail seemingly from Apple that has gone straight into my spam. It says that someone has used my Apple ID to sign into iClous on an iPhone 4. There is a lionk to follow to check my details. I am assuming that I should not so this?
You can forward the email to Apple at the link below.
[email protected]
Also check out the article below.
http://support.apple.com/kb/ht2075 -
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
-
Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.
read this and see if it helps: http://support.apple.com/kb/ht2090
-
Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.
Not sure why that was unchecked but good to know!
Apple's new default (since at least a couple of OS releases back) is to have it off so OS X matches the behavior of an iPhone or iPad.
I almost never need a scroll bar, and when I do, I just move over to the edge of the window when scrolling and a larger scroll bar appears.
Yes, for the most part, users don't really need the scroll bar. That's what the scroll wheel on almost all mice is for. Saves the trip over to bar to physically grab and move it. But, I do like it on all the time regardless. That way (especially with a long article) I can just take a quick glance over to the bar to see about where I am on the page (a third of the way down? halfway?). Otherwise, I have to move the page just to make it appear to give me the same information. -
Someone has hacked my account and changed my security questions. How do I change these questions to my own security questions and answers?
Contact the ExpressLane at: https://expresslane.apple.com then iTunes and iTunes Store and see if they can help. You might also try http://www.apple.com/support/itunes/contact
-
iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?
Hi Ken,
Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
All of these options do not seem too great to me.
I am open to any ideas.
Thanks,
Rob -
If someone has my apple account and password, would they be able to read my text messages also?
I know that if someone has your apple account and password, they would be able to track where you are, but are they also able to check your messages?
No.
-
I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?
Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike
Maybe you are looking for
-
A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql
Hello everybody, SQL> SELECT * FROM v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production PL/SQL Release 11.2.0.1.0 - Production CORE 11.2.0.1.0 Production TNS for Linux: Version 11.2.0.1.0 - Production NL
-
Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was
-
Setting focus to new instance of a field...need help.
Hi there, I have a flowed form which consists of multiple subforms. I have one subform which is basically one textfield that is set to a min of 1 and a max of 5. These are to correspond to fields in our system of record that have 5 fields for company
-
Files that can be retrived while playing through a DVD-ROM
I have a client that wants to be able to retrive picture (jpeg) files off of the DVD while running it in a computer. This DVD will also have a video on it and the client wants the main menu to have a button to play the video and a buttom that will li
-
I have a website in iWeb, and the photos of my jewelry that is for sale are done using the photo grid. I followed the instructions found elsewhere on these forums for using HTML snippets to do the Pay Pal buttons, and they worked great - except the b