If value is 200,000

I have a form which asks the user to enter a value in a numeric field, if the value is greater than 200,000 then I would like an additional text box to appear to allow them to answer a further question.

I dont think this is the problem with ABAP. Try changing the customising settings for excel from control panel.
Ankur Bhandari
p.s Rewqard appropriate points if the answer helped
Message was edited by: Ankur Bhandari

Similar Messages

H/w requirements for DIrectory server for 200,000 users

Hi,
I would like to implement Directory services for 200,000 users. How can I know whether iPlanet Directory 5.1 will support this many users or not? If supports, Which h/w I have to use?
If any one can let me know the formula to calculate users and h/w
Thanks

The directory server can handle many more users than 200K. The hardware requirements calculations are amply explained in the book "Solaris and LDAP Naming Services" by Bialaski. If you have iPlanet support contract they can provide you tuning information which includes this info.
You should remember the possibility of growth and load in terms of number of clients and peak requests per second. With your needs, my gut feeling is that even a Netra can host it. However, if it's an enterprise service you may want to go with at least 220 machines in a replicated configuration for load balancing and availability.
DISCLAIMER: Use these opinions at your own risk. You must do your own analysis and calculations to design a suitable physical/logical architecture.

Customer Exit Variable - Variable Value Error BRAIN 000

I created a variable which is processed by 'Customer Exit'. This variable is 'optional' and NOT user input required.
And i have written my code in customer exit under I_STEP EQ 1.
I used the variable in my query as a default value for a free characteristic.
The query runs fine and return me the correct result.
The problem is when i used the same variable as a default value of a free characteristic in another query which has another user input variable for another characteristic, i got a warning message after input a value for another variable.
Variable Value Error BRAIN 000 <<i>my variable name</i>>
How to make it work in the second query?
Please help as I am new to this.
Thanks,
CH

Hi Fernanda,
Try this:
DATA: LS_RA_SID TYPE   RSR_S_RANGESID.
DATA: fst_date LIKE sy-datum.
   CASE i_vnam.
          WHEN 'ZRANGE_PREVMONTH'.
fst_date = sy-datum - 1.
concatenate fst_date(6) '01' into ls_ra_sid-low.
      ls_ra_sid-sign = 'I'.
      ls_ra_sid-opt = 'BT'.
      ls_ra_sid-high = fst_date.
      APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
   ENDIF.
Just post here for any queries..
Regards,
Loed

No SOAP Envelope but 1 {'}Values; HTTP 200 OK

Hi Experts,
I am configuring a scneario IDOC to SOAP , Asynchronous call to an https url that is available through internet.
When I try to post message to this url. I am getting following error:
SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 {'}Values; HTTP 200 OK
in SOAP Adapter Log. Due to this error the message is set to NDLV.
I am using PI7.1
My Receiver Channel configurations are as contain
the third party url https://target with username password authentication. I have also imported client certificates.
Webservice host says its a problem with PI system and SAP says that its issue with Webservice.
Please let me know how can I resolve this issue. Am I missing something in my configuration. This is kind of a burning issue currently any help will be appreciated.
Regards,
Raj

Hi Raj,
This looks strange. If the error text is telling the truth, your SSL connection was working and you could even reach some service that returned HTTP 200 OK. But this service didn't return a SOAP response. I don't know what 1 {*} Values means. It sounds broken to me. You can open a ticket.
But the reason why you didn't get a valid SOAP response (either a good one or a fault) is probably that your target URL is incorrect. Verify the URL and run the scenario with the relevant components (refer to the SOAP adapter FAQ note) on DEBUG. The default trace file should give you more information about this apparently corrupted response.
Best regards, Yza

How to make labview program to get average value of 200 reading from multimeter (by using loop)

Hello
How to make labview program to get average value of 200 reading from multimeter (I using using loop) to read voltage from mulmeter but I like to get average value of all of 200 reding how can I do that?
Thanks
Wee
Solved!
Go to Solution.

Another idea with less programming - take advantage of the "free" array that comes with a Chart - i.e. the History Data.
1) Wire your DMM data to a Chart. (You can set the chart to invisible if you don't plan on using it in the GUI).
2) Set the Chart History Length to 200 (right click on the chart, click on Chart History Length...)
3) On the block diagram, use the History Data Property Node, wire it to Mean.vi, and you're done.
Easiest running average ever.
Message Edited by Broken Arrow on 04-07-2010 11:36 AM
Richard
Attachments:
EasyAvg.jpg ‏8 KB

Why is Firefox is running at 200,000+ KB on Windows 7/Windows XP?

My last machine was a Dell with 2 GB of ram, Pentium M processor, and Windows XP SP3. After working with an Intel dual-core, 4 GB ram, 250 GB hard drive, 2010 MSI notebook laptop with Windows 7 professional and limited programs running on it, my machine seemed quite slow while using Firefox. I've discovered that (thru Task Manager) Firefox constantly runs at 200,000+ kilobytes at all times. My performance jumps up and forces my machine to freeze. Then, Firefox freezes... then crashes. Most of the time, I only have 3 tabs open. It takes at least 60 seconds to open up Google.com using Firefox 4, 3.5, etc. (this is while connected via Ethernet through a cable line). For this, I cannot run Firefox anymore on my computer. It slows my machine down miserably, as it slows down my work computer, and my boyfriends super dual-quad core machine also shows it running at the same 200 MB. Will this ever be fixed? I love Firefox, as I am a website designer. Working with Google Chrome seems to be my only option at this point.

Hello Dawyne.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs

Time Machine always copying 200,000 files, taking 2 hrs.

I'm using Time Machine Buddy to monitor my backup sessions. I've noticed that every single time, Time Machine is backing up more than 200,000 files and is taking between 1½ ~ 2 hours to complete. Obviously, that doesn't seem right. Not sure how 200,000 files are getting modified on my Mac every hour! And those 200,000 files are only 126MB!
Is there any log I can see what files Time Machine thinks it needs to backup (and then perhaps exclude that folder)?

Navarro Parker - wrote:
ITime Machine is backing up more than 200,000 files......And those 200,000 files are only 126MB!
Hmm. Have you any Adobe applications installed? A while ago I installed Photoshop Elements and discovered it had set off a rogue process that was generating thousands of tiny files every minute *even when I wasn't using any Adobe applications*.
I only discovered this one day whilst making a clone with Carbon Copy Cloner and I happened to be reading the CCC log when it was cloning all those thousands of files and was taking much too long (because my system was creating those files faster than CCC could clone them!)
Thus I was able to see their names and where they were (hidden away somewhere deeply nested inside a series of folders in the Library).
So I trashed them all, trashed all my Adobe applications and related files (the process of doing so was fairly laborious) and started over, but NOT installing Photoshop Elements.
Things seem to be OK now.
I wonder if that helps ?

Firefox uses 100,000 K - 200,000 K memory even in safe mode; hangs and freezes periodically

In the past week or so I've been experiencing regular freezing and hanging, but only when Firefox is open. The freezing and hanging can affect other programs, but it always starts with Firefox. It can be either a) the browser stops responding, dims white, and the spinning circle appears, b) browser stops responding as does the task bar, can't click on any other open windows and sometimes the task bar dims as well, or c) the screen freezes entirely, with mouse movement not shown (although the mouse does move--it appears to freeze, but if I move it and wait, it'll be wherever I moved it) and if I was loading a page, the loading circle in the tab stops moving as well; it's as if a screenshot has been taken and replaced the screen.
I'm thinking this has to do with memory usage; Firefox uses 200,000 K memory normally, and starting in safe mode only drops it by 20,000 K - 30,000 K.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Time machine estimate to take 200,000 days

I have a WD 1TB usb 2 external drive which I have recenlty reformatted to use as time machine. I have a 2011 imac 21.5"with mountain lion 10.8.2 running.
First start of time machine is estimating 200,000 days to back up! I have seen on the internet to run sudo tmdiagnose and close dropbox, but not making any difference. The external drive is formatted for max os journalled. I can transfer files to external very quickly still. Its just time machine. Any ideas on what is wrong?

Try visiting the Great Pondoni's site - http://www.pondini.org/TM/D2.html - for 'slow or hung backups'.
If I were you, I would just erase the external drive, again, and setup TM anew... but read what Pondoni has to say first.
Good luck,
Clinton

Switzerland: 200'000 IPhones, BUT NO TV SHOWS for the APPLE STORE!!!

Switzerland has got about 200'000 IPhones. But *We can't have TV-Shows and Movies in the Itunes Store*, That is terrible.
My Question is simple:
WHY?

This is a user to user forum, no one here would know why any particular store has the content (or lack of content) that it has. One can presume that at this point in time no license agreements have been struck with any Swiss TV channels or Movie license holder to supply TV show or movies in your region.
You can send your feedback/requests directly to apple at this link: iTunes Requests

Is it really possible to go from $0 to $200,000 in credit in 2 years?

I was reading a post on another forum where a member said that they went from $0 to $200k in credit in just two years. This was in the form of credit cards only; no loans. It was also implied that they started from scratch with no prior credit at all. They briefly detailed how they did it, which seems to have involved opening a lot of secured cards in the beginning. So, is it really feasible to obtain that much credit in just two years starting from scratch?

gen-specific wrote:
I would say yes My AAoA is a little over 2 years right now. but I have data from further. I believe if I was reporting the income I have now and was aggressive then it would have been possible. I'm currently stress testing how FICO reporting works, and I realize I have been very skittish in the past. Like all the guides so "don't do too many apps" but what is too many? I thought having 1, 2 or 3 were the limit, before I noticed a 8 point drop in my credit score. OMG NOT 8 POINTS, I'LL NEVER REACH 763 WHICH I ANECDOTALLY HEARD WAS GOOD when really the low 700s and high 600s are just as fine in the age of easy credit. You can always renegotiate lower interest rates on cards when your credit # improves. I was at around $30k credit across all my cards for a while, before I started really stretching my desired CLI #s. Then one time I told Citibank to increase my credit limit to $60,000 and it was immediate. I was totally expecting a second lower offer, in the mail, 10 business days later. Sometimes I opened a new card, and got an instant $30,000 . Even with a brand new institution I had no relationship with.Congrats on your success!

Fastest way to read a 5MB textfile (200,000 lines)?

My current code:
String file = "";
BufferedReader in = new BufferedReader(new InputStreamReader(new FileInputStream(filename)));
while(in.ready()) file = file.concat(in.readLine());Unfortunately it is awfully slow (starting with 2,000 lines per second but dropping to like 100 lines per second over time). What is the fastest way to load the content of that file in a string and out of curiosity, why are my lines per second dropping?
Thank you for your help!

tjacobs01 wrote:
This is exactly what I've done - it's the fastest thing out there. One thing to comment on though: Using a BufferedInputStream is not necessary; BufferedInputStream only improves performance if you're doing inefficient reading (such as reading blocks by newlines). If you doubt what I'm saying set up a quick performance test bed and test it... I did this a while back which is why I know the truth :)I believe you. Thanks for the tip.
In my case I needed the BIS because I only wanted to load the 40 MB audio file in 1 MB chunks at a time
to process it and store it in my own representation.

How do I extend the functionality of the hp34420a driver so I can modify the NPLC (integration time) parameter to a value of 200??

I am trying to configure this meter for DC volt mode and 7.5 digit and NPLC 200 settings with hp34420a 2.0 drivers in LabView 5.1. The drivers appear to limit the configuration to 6.5 digit and NPLC 10 (default) maximums.
An attempt at modifying the strings in the HP34420A Config Measurement.vi with the string "ENS:VOLTC:NPLC 200" caused a timeout failure in the HP34420A Read Meas.vi, which was not recoverable by simply removing the offending sub-string in the first VI.
This program is in the latter stages of development, so a method or technique that will allow the incorporation this configuration of the HP 3
4420A, and that will extend the default timeouts in HP34420A Read Meas.vi so that readings can be obtained in the program under this configuration, is sorely needed.
Thanks.

Bill,
We normally do not support modifications to our instrument drivers, but we can give suggestions. The driver that you describe in your question must be one of our Legacy drivers, and unfortunately we do not have those available any longer. I would recommend downloading the updated IVI driver for the HP34420A from our Developer Zone site at
http://zone.ni.com/idnet97.nsf/browse/
Just do a search for 34420A and you will bring up the link to the download. You will need our IVI Engine 1.5 and VISA 2.0.1, which you will find links to there as well. The IVI driver should allow you to make the adjustments to the NPLC and DC volt mode.
Ryan Tamblin
Applications Engineer
National Instruments

FS: PCI-6024E DAQ card for sale - 200,000 samples/sec - 16 inputs - GREAT DEAL!

Hello everyone,
I have a PCI-6024E DAQ card for sale.
If you want more information, please contact me - I have the following items, selling as a set:
* PCI-6024E Multi I/O and PCI DAQ card, low-Cost E Series Multifunction DAQ, 12-Bit, 200 kS/s, 16 Analog Inputs ($595/list)
Thanks,
Dave M
[email protected]

I'm sorry, I should have put in the post that I will entertain offers. Please make an offer.
Regards,
Dave M.
"DaveM" wrote in message news:RJErb.7470$[email protected]..
> Hello everyone,
>
> I have a PCI-6024E DAQ card for sale.
>
> I am sorry if this is off topic - if someone knows what forum to sell NI hardware please let me know.
>
> If you want more information, please contact me - I have the following items, selling as a set:
>
> * PCI-6024E Multi I/O and PCI DAQ card, low-Cost E Series Multifunction DAQ, 12-Bit, 200 kS/s, 16 Analog Inputs ($595/list)
>
> * CB-68LPR (184700B) connector block ($95/list)
>
> * 182482A-01 type R6868 1meter cable ($40/list)
>
> Thanks,
>
> Dave M
> [email protected]

Best way to run about 200,000 update statements?

Just throw them all in SSMS all at once? That doesn't seem like the best way especially since something may fail part way through. What would you suggest? Do it in code?

Some samples:
update XC01_CLME_MEMBER set CLME_LAST_NAME='BRAINARD' where RUN_DATE_KEY=287 and CLMS_CLCL_KEY=483584 and CLME_LAST_NAME = 'OFTEDAHL'
update XC01_CLME_MEMBER set CLME_LAST_NAME='BRAINARD' where RUN_DATE_KEY=297 and CLMS_CLCL_KEY=796073 and CLME_LAST_NAME = 'OFTEDAHL'
update XC01_CLME_MEMBER set CLME_LAST_NAME='BRAINARD' where RUN_DATE_KEY=297 and CLMS_CLCL_KEY=796074 and CLME_LAST_NAME = 'OFTEDAHL'
update XC01_CLCL_CLAIM set MEME_CK=6652504 where RUN_DATE_KEY=461 and CLMS_CLCL_KEY=1645516 and MEME_CK = 6652503
update XC01_CLCL_CLAIM set MEME_CK=6652504 where RUN_DATE_KEY=461 and CLMS_CLCL_KEY=1645517 and MEME_CK = 6652503
update XC01_CLCL_CLAIM set MEME_CK=6652504 where RUN_DATE_KEY=461 and CLMS_CLCL_KEY=1645518 and MEME_CK = 6652503
update XC01_CLCL_CLAIM set MEME_CK=6652502 where RUN_DATE_KEY=921 and CLMS_CLCL_KEY=2413143 and MEME_CK = 6652503
update XC01_CLCL_CLAIM set MEME_CK=3334351 where RUN_DATE_KEY=297 and CLMS_CLCL_KEY=819206 and MEME_CK = 3334352

If value is 200,000

Similar Messages

Maybe you are looking for