If youare not wanting to eat, recall, youare not increasing

Do not forget that you need lots of extra calories to create Nitro X Pros. There are many calculators available, some even online. They could enable you to know what your consumption ought to be centered on your Nitro X Pro mass targets. Let these resources
enable you to design the Nitro X Pro Building Diet that is best.
Use some Nitro Focus NO3 products however not to surplus. They are a good way to have the vitamins you should the body rapidly. I would advise to start off with whey protein products after which I would slowly transfer onto creatine and glutamine. The best
situations to get supplements is in the morning, before/ before bed and after teaching. 4. Keep away from fats and salts that are excessive. However, you do require some fat for a nutritious diet. Some things that have excellent fat are peanut butter oil and
fish. Additionally, consume lots of water, fuel up before you workout and when you workout have a dinner /move, which can be a significant nutrition boost.
http://anradrol.com/nitro-focus-no3-review/

I agree... I am trying not to whine... but be helpful to others if they experience the same while get input before I make the decision to return (which I am leaning towards)… It’s still a great phone – but I expected something different. I also have been coming the internet and forums to see what other people think as well to make sure I am not being oversensitive about it. $300 for a 16gb is not buyers remorse kicking in… it’s just I am not sure if I see much of a difference from my perfectly good (8month old) iPhone 1st generation…
But yes… if all iPhone 3G were problematic it would be in the news… so I err on the side that I may be a unique situation or simply did not make a well informed decision when going to 3G.
Still… the idea of turning 3G off to get a full day of use out of an iPhone… even moderate use that most of us would expect w/o charging midway or multiple times is a bit much to swallow.
I don’t want to bash and just looking for peoples reaction. I still really like Apple and the iPhone in general.

Similar Messages

Net value of Credit memo must not increase, but accountingdoc must generate

HI All
This is my sales- return process
Sales order has been created for
Material : Ax001:   10 Qty : Total price : 100$   Per unit = 10$
Sales order has been created : for 10 units        (sales doc number:AAAAS)
Billing has been done : 10 units for the value 100$
Accounting documents posted : Credit :100$   Debit accout: 100$
Returns sales order:
This is done with reference to the sales order
Return Sales order has been created with reference to sales order : (sales doc number:AAAAS)
Qty :1 Value of the product =10$   Material: Ax001
A manual condition type is defined to reduce the value of the actual price .. The company is planning to give only 5$ for the return material
Manual condition has been included in the Return saels order Total net Value = 5$ qty = 1
Credit memo has been created : for 5$
Accounting doc: Credit account = 5$ debit account =5$
Issue: The account team wants one more account document to be created for the original value of the product i.e 10$
The net value in the billing document must not increase, but the account document must be created for the value=10$
This is for nullifying the original value of the product from the book of accounts
Solution tried : Manual condition for the original value =10$ keeping it as statically condition type : issue: account doc will not generate if it is statically . CND ref: 100% discount it did not work the net value in the order/billing is increasing
Please let me know how to generate the Accounting document with out increasing the net value.. Using standard SAP. we can create a routine and we can do this .. but we are looking for the Standard SAP solution if any,.....
Thanks for your help in Advance
Chandra

Hi Chandra,
In your scenario create new condition type and update that condition type with accruals at control data 2 section and create relevant access sequence and update the condition type in your return pricing procedure and create new account key one for regular posing and one for accruals and take help from FI /CO to create new two accounts one for regular updates and one for accruals posting ,
in your pricing procedure mark this condition as statistics relevant it will create automatically accountancy document for reference,
Try this and let me know if you have any questions.
Regards
Nishad

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Losing Z10 Storage Capacity / Free Space not increasing after file deletion in BB Link?

If anyone has tried adding and removing items to the z10 via blackberry link and noticed that once items are deleted the space that should be freed up completely disappears from BB link.... don't panic. I checked on my phone and the storage space is still free 11.4GB But on BB Link I now only show 3.9GB free space so I cannot add all the files that I want to. I restarted the phone. No change. I restarted BB Link and it now shows all my free space - obviously just a minor bug.
'LIKE' me if it makes sense...
PS. The BlackBerry Z10 & PlayBook rock with the QED uPlay!

I had read something about this else where so I thought i'd share my findings as it looks like I'm not the only one and someone may have a panic attack.
I uploaded around 7gb of mp3 data that i later deleted. My free space stayed at 3.9gb and did not increase but my overall space went down to around 4gb showing 3 photos and a movie trailer as my only stored items.
'LIKE' me if it makes sense...
PS. The BlackBerry Z10 & PlayBook rock with the QED uPlay!

Why the applied_scn can not increase?

I use the Oracle stream while I find the change of the source databse can apply in the remote database,but the applied_scn can not increase for a long time after the change has success.If this scn can not increase,I can not delete some logfile,which may be full of my disk one day.
Who has suggestion?

you say you want delete some logfile , destination's logfile , is it right ?
i think that's no problem because the change of LCR is kept in Stream Queue but not in logfile. that means you can drop some archivelog as you want. it dosn't matter! :)

HT201318 On 12/19/2014 I added 20 MG of ICloud storage using my credit card. The charge is still pending and my storage has not increased. I am planning on upgrading my phone and I need to update ICloud on my phone. Thank you

On 12/19/2014 I added 20 MG of ICloud storage using my credit card. The charge is still pending and my storage has not increased. I am planning on upgrading my phone and I need to update ICloud on my phone. Thank you

This is a user-to-user support forum. You may want to report the problem using the following link: https://www.apple.com/emea/support/itunes/contact.html

Broadcast/multicast counters does not increase on vlan interface

Hi,
on a Cat6500 we try to monitor interface packet statistics via snmp, in detail we want to get information about the relation between unicast, multicast and broadcast packet counter.
What we found out is that while on physical l2 interfaces all counters (ifHCInUcastPkts, ifHCInMulticastPkts, fHCInBroadcastPkts, ifHCOutUcastPkts, ifHCOutMulticastPkts, ifHCOutBroadcastPkts) are filled, on vlan interfaces multicast in/out and broadcast out packets stay zero whole the time. We use arp, hsrp, ospf and other well know broadcast and multicast based protocols.
Does anybody know why this counters do not increase?
Attached you find an excel sheet which shows an example of interface counter vs. vlan counter.
many thanks in advance,
Thorsten Steffen

Hi jon,
belown the result of sh sdm prefer,so need i a licence ip service to apply the route-maap on the interface vlan,or just entrer the config"sdm prefer routing" and reboot the switch?
SWBB0#sh sdm prefer
The current template is "desktop default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:                  6K
number of IPv4 IGMP groups + multicast routes:    1K
number of IPv4 unicast routes:                    8K
    number of directly-connected IPv4 hosts:        6K
    number of indirect IPv4 routes:                 2K
number of IPv6 multicast groups:                  64
number of directly-connected IPv6 addresses:      74
number of indirect IPv6 unicast routes:           32
number of IPv4 policy based routing aces:         0
number of IPv4/MAC qos aces:                      0.5K
number of IPv4/MAC security aces:                 0.875k
number of IPv6 policy based routing aces:         0
number of IPv6 qos aces:                          0
number of IPv6 security aces:                     60

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

I cannot sort my songs using the "plays" column (also known as the number of plays column). The number of "plays" is not increasing as a song finishes.

The "plays" column (also known as the number of plays column) is not saving not saving the number of plays (v 11.0).

My number of 'Plays' was not increasing anymore at some point after updating to Version 11. I had iTunes rev 11.0.1.12. Today I updated to the latest rev 11.0.2.26, and now the numer of plays is increasing, so they must have fixed the bug!

Volume buttons on side are not increasing/decreasing the volume on my iphonr

The volume buttons on side of iPhone are not increasing/decreasing the volume on the iPhone 4s

Hello Chloelovescole,
I'm sorry to hear you are having these issues with your iPad. If you are having issues with the side buttons either not responding or appearing to be stuck in a pressed state, you may find the information and troubleshooting steps outlined in the following article, up to and including contacting Apple Support for service if necessary:
Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden

Importing classes does not increases SWF size

Hi, there!
I was doing tests, and realized that the some classes of AS3
does not increases the size of the SWFs. In AS2 UIComponent class,
for sample, the SWF increases 4 kbytes importing this class
(UIComponent).
So, I ask you: which classes does increase files size?
Thank you in advance.
CaioToOn!

Hi, Andrei!
I've already tested instancing then. And the SWF file became
636 BYTES, not even 1 Kb. I believe that this size (636 bytes) are
only about the bytes of the characters of the Class. Look the code
below:
package
import flash.display.MovieClip;
import flash.filters.BevelFilter;
import flash.filters.BlurFilter;
import flash.filters.ColorMatrixFilter;
import flash.filters.DropShadowFilter;
import flash.display.Loader;
import flash.filters.GlowFilter;
import flash.text.TextField;
public class Main extends MovieClip
private var e:BlurFilter;
private var e1:DropShadowFilter;
private var e2:TextField;
private var e3:GlowFilter;
private var e4:BevelFilter;
private var e5:ColorMatrixFilter;
private var load:Loader;
public function Main()
load = new Loader();
e = new BlurFilter();
e1 = new DropShadowFilter();
e3 = new GlowFilter();
e4 = new BevelFilter();
e5 = new ColorMatrixFilter();
te.filters = [e, e1, e3, e4, e5];
e2 = new TextField();
e2.text = "CaioToOn!";
addChild(e2);
It really don't increases the file size. Only because of the
extra characters.
CaioToOn!

Int not increased when incremented in method call

Hi,
Could someone please explain why my int value is not increased in value when the increment is performed within a method call?
private void printString(int i)
if( i > 5)
System.out.println("Greater than 5!");
else
printString(i++);
}Thanks

jverd wrote:
masijade. wrote:
It is incremented, just after the print, as pointed out above.No, it's incremented before the printString method is recursively called, but after the argument's value (the value of the expression i++) has been determined.
As it stands, if he calls that method with i <= 5, it will recursively call itself with the same value until the stack blows up.Yes, yes, I know. Stupid me. The print just simply doesn't get the incremented value.
P.S. I didn't realise it was a recursive method. I saw "print" and thought it was simply an SOP (you know what they say, that you see what you expect to see). ;-)

MB990 and SL - Fan speed is not increasing automatically

Hi Guys,
Two days ago I changed my macbook's hard drive to a bigger one and did a fresh install of Snow Leopard.
As soon as I installed the SL I noticed my computer was running hotter than the previous installation. Without doing anything, my macbook is reaching 75C (167F).. I have already checked the activity monitor and no process is using the CPU. Now I realized that the fan speed is not increasing automatically, it is always fixed at 2000rpm even if the temperature reaches 72C.. I have already tried a SMC reset but the problem persists..
Does anyone know a solution for this? The problem is the fan speed that is not increasing..
I'm having to use smcFanControl to control de fan speed manually. Before the fresh install I was using Snow Leopard updated from the Leopard and I was not facing this problem.
Thanks a lot!

Hi there... i have the same problem. my temperature gets up to 75C with just one window open in safari or google chrome. I have downloaded smc Fancontrol but ...its not enough. have u solved this problem yet? i'm going in to the Genius Bar tomorrow to see if they can help.

Total purchase value should not increase beyound certain value.

Dear Sirs,
The requirement from my client is-
The total value of certain materials purchase should not increase beyond certain value.
Here vendor is not constant. Can any body help me in this respect.
regards,
Anup.

Dear Mr Anupkumar,
Please use release strategy to monitor PO value. Beside that value contract, source list & quota arrangement is other option to control vendor's activity. TQ
rgds,
nanthakumar

Hello I have a problem related to synchronization. When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt. How to make the section "Other" did not increase? Thank you.

Hello
I have a problem related to synchronization.
When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt.
How to make the section "Other" did not increase?
Thank you.

DOCUMENTS AND DATA IS ALSO WHERE YOUR MAIL INFORMATION IS STORED SO IF YOU ARE A "HOARDER" IN EMAIL, GO INTO THE GMAIL, HOTMAIL, ICLOUD ETC WHATEVER YOU USE, AND DELETE YOUR TRASH, SENT, DRAFTS, ETC.
THAT SHOULD HELP A LOT.

If youare not wanting to eat, recall, youare not increasing

Similar Messages

Maybe you are looking for