Import into Consolidation system failed

Hello,
We are on NW04s and tryign to import ESS component and other standard components like SAP_JEE,SAP_BUILDT into the Consolidation system and import fails in between with the CBS Log as:
Build number assigned: 7851
Change request state from QUEUED to PROCESSING
INTERNAL BUILD request in Build Space "D77_ESS11ADC_C" at Node ID: 778,177,350
     [id: 7,845; parentID: 7,539; type: 32]
REQUEST PROCESSING started at 2007-12-14 23:25:37.149 GMT
===== Pre-Processing =====
Calculate all combinations of components and variants to be built...
     "sap.com/ess/jp/fam" variant "default"
Prepare build environment in the file system... started at 2007-12-14 23:25:37.227 GMT
     Synchronize development configuration... finished at 2007-12-14 23:25:37.227 GMT and took 0 ms
Development line state verification started at 2007-12-14 23:25:41.336 GMT
Verification of the development line [ws/ESS11ADC/sap.com_SAP_ESS/cons/active/] SUCCEEDED
Development line state verification finished at 2007-12-14 23:25:41.352 GMT and took 16 ms
Cache verification, level 2 (Comparison of attributes) started at 2007-12-14 23:25:41.352 GMT
Verification of the following object:
     [DC: sap.com/ess/jp/fam, group: 0] SUCCEEDED
Cache verification finished at 2007-12-14 23:25:41.368 GMT and took 16 ms
     Synchronize component definitions... finished at 2007-12-14 23:25:41.446 GMT and took 4 s 219 ms
     Synchronize sources...
===== Pre-Processing ===== finished at 2007-12-14 23:25:50.227 GMT and took 13 s 78 ms
Change request state from PROCESSING to FAILED
ERROR! The following error occurred during request processing:java.lang.OutOfMemoryError
Unknown reason (java.lang.OutOfMemoryError)
REQUEST PROCESSING finished at 2007-12-14 23:25:50.243 GMT and took 13 s 94 ms
What can be dome to fix the OutOfMemory Error...?
Any help would be highly appreciated..

Hi Shikhil,
Please do the follwoing
1. Incrrease the memory size by navigating to Check the CBS settings in the Visual Administrator->Services->Component Build Service-> Tab 'Properties'
2.Refer to this thread
CMS Error importing into Consolidation System
3.SAP NOTE 723909
Thanks
Pankaj

Similar Messages

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

CTS+: Automate Imports into Quality system

Hi,
We have recently configured CTS+ in our lanscape and we have been successfully moving the non-abap objects.
In a demo on CTS+ which was posted in sdn, i had seen that as soon as transport is released from Transport organizer Web UI, it triggers the import job in quality system automatically....
We are unable to achieve it......can anyone help us out on this...any specific configurations need to carried out.
Both Dev and Qua are having SPS17.
Regards,
K S Srinivas Reddy.

Hi,
can check this
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58]
Regards,
Muralidhar

Transport to consolidation system doesnot reflect in components

Hi There,
We have configured a separate Consolidation system for our WebDynpro developments. and we are using TCS for deployment. After import to consolidation system and TCS deployment , changes are not reflecting in Consolidation system.
We defined new track and its components and after initial imports we got development configuration in Development studio and made changes.
Thereafter we have followed these steps
1) We released and transported all our changes from Webdynpro Studio.
2) started Import on Consolidation tab and all components were successfully imported.
3) started TCS deployer for selected track_c and that also completed, without any error messages
4) test in consolidation system shows webdynpro changes have not been moved.
This is first round of imports on this track, if there is anything we might have missed out.
Please suggest.
Thanks a lot for your time.
Rgds

Solved this..
Created one more request with application files and followed the cycle.. and this time it deployed application. Weird though worked.
Cheers

Transport Request is not flagged for import into production.

When I try to migrate a CR from the quality system to the acceptance system, through solution manager system, the status flag still remains to be "To be tested" which normally does not happen.
I get 4 warnings as below:
1) Status was reset by system
2) No import into test system has taken place.
3) Transport request is not flagged for import into production
4) The tester role cannot be the same as the developer role.
Usually when a CR is selected for migration to Acceptance, the status flag automatically sets to "productive", which in turn depicts that the CR has been migrated to acceptance and is ready for import into production.
But when I check the Transport log in the acceptance system, it is evident that the CR has been migrated to acceptance with errors.

I guess these errors you mentioned are the reason why ChaRM reports your transprot request as
2) No import into test system has taken place.
1) Status was reset because 2) is not fullfilled.
3) did not get flagged because status was not set due to previous errors.
4) business partner of user with function "tester" (apparently the one who tries to set status) is the same as the business partner assigned to function "developer". If it should be the same person you can switch off the warning in customizing.
Try to correct import errors and repeat status switch.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

Error While importing SAP query into quality system

Hi,
When Itried to import the dataset(Transport Request) generated in develoment system into Quality system I am getting the following error.
Query already exists and Infoset contains a structures which is not there in data dictionary .
How to oversome this error to import successfully into quality system
thanks

hi,
You need to transport your Z tables to the quality.
Make sure you transport all the data elements , domain.. etc to the quality.
Thats why its giving you the error.
It does not find the Z tables in Quality
Regards,
Vinod

What's Happening?? Some days after installing latest security up date for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes.No other CD or DVD disk will mount.

What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?

Hello Robert,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

CHARM activation check failing on "consolidation system for development system SSA-200 in project ZTEST2

Hello,
We are implementing Charmlite and want to activate in project landscape.
We are Solution Manager 7.1 SP11 and testing this scenario in sandbox.
Steps completed:
1. in sandbox domain controller, created two virtual systems and made 3 system landscape, where, I can release the transport and see it in QA system (Virtual system buffer)
2. The LMDB has been updated with Virtual system and in SMSY, the entries of virtual system shows up. The logical components have the client information.
Issue:
in /nsolar_project_admin ->System landscape -> change management, When consistency check is performed, we get error message saying
Virtual RFC is miising (I am guessing, it should be okay)
The logical component is incosistent (This might be the reason the CHARM is not getting activated.
"No consolidation system for development system SSA-200 in project ZTEST2
No track for project ZTEST2 with log. system SSA/200"
For me, when i look in satellite system, the consolidation system is a virtual system and it should be fine.
Please advise
Regards,
Durga PK Saitana

Thank you Karthik. Still the problem persists
I went through the blog earlier. I created l ABAP instance manually in SLD and moved into LMDB and can see the entry in SMSY. (I did not see any option of putting virtual flag)
We were trying harmonization of RFC from note 1384598 and since we had virtual systems, went with domain links.
After domain links, the virtual systems are read. the Dev ABAP system is not able to find the consolidated system. In the satellite system, I can release transport and move the transport.
Not sure, why this issue is persistent.

HT201342 i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and fai

i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and failed. Something might i doing wrong

I just had the same problem, I've updated to 10.6.8 yesterday, and since then the browsing are very slow, no matter what broswer I am using, the upload download speed are still the same. But browsing just take forever, It takes for example google.com 30 seconds to load. I have Extream high speed internet connection, 3 other computers, and the only one is having this problem is the Mac after the update.
Something in this update screwed my browsing capabitilties, I tried downloading Crome browser, same issue.
I hope there is a way beside TimeMachine to revert the latest update. I don't want to reformat as I am sure as soon as I am going to do the update it will cause the same problem.
Model Name:    iMac
Model Identifier:    iMac11,3
Processor Name:    Intel Core i7
Processor Speed:    2.93 GHz
Number Of Processors:    1
Total Number Of Cores:    4
L2 Cache (per core):    256 KB
L3 Cache:    8 MB
Memory:    12 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    IM112.0057.B00

PSD files created using export data set fail to import into lightroom

If I create a set of files using variables in a data set, the PSD files won't import into LightRoom. LR says to resave with maximum compatibility, but I already have that set in Photoshop. If I open one of the files and resave it, it will import. Perhaps PS isn't honoring the maximize compatibility setting when exporting.

Hi,
I downloaded 10g database ver 10.2.0.1.0 from oracle site and installed it on my laptop. I took an export of schema which was on my 9i database ver 9.2.0.1.0 using 9i exp, created tablespace and user in the 10gdb and tried to import the same to 10gdb using 10g imp using the following.
imp system/pswd@10gdb fromuser=test touser=test file=expdat.dmp log=expdat.log
it displays
.importing SYSTEM'S objects into SYSTEM
.importing TEST'S objects into TEST
and it doesnt import any objects just hangs. The Log file does'nt have any entries.
Can anyone help me.
Thanks in advance
Smdas

Applet fails to load after loging into the system

Hi
I'm developing a web application for playing multi-player games. The game is played in an applet. I've written the applet and all worked well when embeding it in an ordinary jsp page. The problem starts when I try to start the applet as after logging into the system - it doesn't load and in java console I get:
load: class pl.cardq.applet.ChatApplet not found.
java.lang.ClassNotFoundException: pl.cardq.applet.ChatApplet
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:183)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
 at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:127)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
 at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:626)
 at sun.applet.AppletPanel.createApplet(AppletPanel.java:778)
 at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2045)
 at sun.applet.AppletPanel.runLoader(AppletPanel.java:707)
 at sun.applet.AppletPanel.run(AppletPanel.java:361)
 at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.IOException: open HTTP connection failed.
 at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:286)
 at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:44)
 at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:173)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:170)
 ... 9 more
I guess tit's because some sort of security restriction...
Any help more than welcome

Thanks for the reply.
The connection is ok but I figured out that it's not about the logging in.
The applet stops loading when I add jsf to an ordinary jsp page. (in jsp it works fine)
Can you help me with that?
My page code is:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<f:view>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h:form>
<f:verbatim escape="false">
<applet code="pl.cardq.appletChatApplet" archive="CardQApplet.jar" height=450 width=400>
<PARAM name="USER" value="cama">
</applet>
</f:verbatim>
</h:form>
</body>
</f:view>
</html>

How to Import ifo cube into BW system

Hi Experts,
I have issue regarding to cube import.
The cube is available in DATA WAREHOUSING system, We have any mechanism to import the cube format into SAP BW system.
If the InfoCube is available into another BW system, simple transport InfoCube into BW system. Other than this situation how it's be possible.
Please let me know the details.
Thanks in Advance,
Chandra

Hello Chandra Sekhar,
How r u ?
I believe it is not possible, may be data could be pulled from ur other Data Warehousing system, but not the objects. You have to use only BW objects (InfoCube). Bw follows a different architecture.
Best Regards....
Sankar Kumar
+91 98403 47141

Transport to consolidation system

Hi ,
A scenario, where multiple developers have worked on multiple DCs. If, we want to release only 3 Dcs (1 Dc + 2 used Dcs) into a consolidation system, we are faced with a very peculiar problem.
The developers have worked with no naming conventions on large number of Dcs. And, now we want to transport only 3 Dcs from them to the Consolidation system.
The approach we are taking is: Synch the latest copy of these 3 DCs from active space, using NWDS open all possible files for edit, associate them with new activity name. (No modifications are done on these files). Check it in again, activate , release this activity from the Transport View of the NWDS.
If in the CMS - Transport Studio, we import only this activity in the Import queue to the Consolidation system, will these 3 DCs get imported Consolidation system?
Or, should we go into all the developer's NWDS, open all checked in activity from the Transport Studio of NWDS, identify all activities related to these 3 Dcs , release them individually and then go to CMS - Transport Studio and import all these activities into the consolidation system to get these 3 Dcs into the consolidation system.
Which approach will work?

1. Will the 3 dcs get imported only if all activities (1st to last) related to them are released from NWDS Transport studio and then Imported from CMS - Transport Studio ?
2. Will single activity in the end which has opened all files for edit, work???
Regards,
Sandeep

Hi Pascal,
I do know that for ACTIVATION (after checkin), if the current activity has predecessor activities, then they will tagged along with this last activity, for the Activation process.
Is this the same case for Activities Transport Release as well (In NWDS-Transport View)?
So, In NWDS, Transport View under Waiting section, when my last checked out for Edit Activity, which has been activated already, and is awaiting release, is Released, all predecessor activities (which has been activated & awaiting release as well) will get associated automatically???
Therefore,
1. I do not have to ask all developers to go open their NWDS-Transport View and hunt for activities pertaining to the DCs to be released.And, then ask them to release it? RIGHT?
2. All I need to do is to release the last activity under Waiting and the rest of all activities by other developers will get automatically attached??? RIGHT?
Thanks,
Sandeep

Error with SAPDFACT during import. (BW System Export / Import)

Hi,
I'm performing an import into an Oracle DB using an export from an Oracle DB of a BW system.
I'm getting the following errors from SAPDFACT, it proceeds if I "ign" the indexes of the affected tables but there are 100s of indexes, must I do this for all?
L:\usr\sap\EAD\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.log -stop_on_error -k 1Wegd5M50Dp01eqtd1M80Ae2
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "EAD20090719090758                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "MYBWESSDEV02                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "MYBWESSDEV02"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 33 Step 2)"
DbSl Trace: Error 2158 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-2158 occurred when executing SQL statement (parse error offset=244)
(DB) ERROR: DDL statement failed
(   CREATE            INDEX "/BI0/E0FIAA_C13~P" ON "/BI0/E0FIAA_C13"        ("KEY_0FIAA_C13P",         "KEY_0FIAA_C13T",         "KEY_0FIAA_C13U",         "KEY_0FIAA_C132")        PCTFREE 10        INITRANS 002        TABLESPACE         STORAGE (INITIAL     0000000016 K                 NEXT        0000000016 K                 MINEXTENTS 0000000001                 MAXEXTENTS UNLIMITED                 PCTINCREASE 0000                 FREELISTS   001) )
DbSlExecute: rc = 99
(SQL error 2158)
error message returned by DbSl:
ORA-02158: invalid CREATE INDEX option
(DB) INFO: disconnected from DB
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: job finished with 1 error(s)
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: END OF LOG: 20090720171142
Any help is greatly appreciated.
Thanks!
- Ahmad M.

Hi Eric,
I updated the R3load binary but I'm still facing the same issue. I also tested OPS$ as per previous suggestions but I'm still facing problems with SAPDFACT.
Extract of the log
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Jul 5 2009 21:29:44
L:\usr\sap\EAD\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\IMPORT\SYSTEM\ABAP\ORA\NUC\DB/SAPDFACT.log -stop_on_error -k 1Wegd5M50Dp01eqtd1M80Ae2
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "EAD20090720060750                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "MYBWESSDEV02                                                    "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "MYBWESSDEV02"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 33 Step 2)"
DbSl Trace: Error 2158 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-2158 occurred when executing SQL statement (parse error offset=174)
(DB) ERROR: DDL statement failed
(   CREATE BITMAP            INDEX "/BI0/E0FIAA_C11~01" ON "/BI0/E0FIAA_C11"        ("KEY_0FIAA_C11P")        PCTFREE 10        INITRANS 002        TABLESPACE         STORAGE (INITIAL     0000000016 K                 NEXT        0000000016 K                 MINEXTENTS 0000000001                 MAXEXTENTS UNLIMITED                 PCTINCREASE 0000                 FREELISTS   001) )
DbSlExecute: rc = 99
(SQL error 2158)
error message returned by DbSl:
ORA-02158: invalid CREATE INDEX option
(DB) INFO: disconnected from DB
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: job finished with 1 error(s)
L:\usr\sap\EAD\SYS\exe\run/R3load.exe: END OF LOG: 20090721001150
Tried to search for SAP Notes related to this error but no luck so far.
Can any one advise if I could "ign" all the indexes in the TSK file then later on use the BW indexes repair program to fix the missing indexes?
Any help is greatly appreciated.
- Ahmad M.

Import into Consolidation system failed

Similar Messages

Maybe you are looking for