Ifplugd(eth0)[540]: Program execution failed, return value is 1.

May 14 17:17:11 localhost ifplugd(eth0)[540]: client: Profile "1" does not exist
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading ipv6
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading JBH_Rooms_3
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading foobar
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading heng_lc@tp
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading MYNE
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: Profile "MYNE" does not exist
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: loading RESORT
May 14 17:17:11 localhost ifplugd(eth0)[540]: client: Profile "RESORT" does not exist
May 14 17:17:11 localhost ifplugd(eth0)[540]: Program execution failed, return value is 1.
Whenever I plug into a network, I don't know what does this, but Archlinux oddly seems to go through profiles in /etc/network.d. Why it doesn't simply call dhclient on the wired interface ??
My workaround is to manually setup the wired network everytime.
x220:~$ grep -v '^ *#' /etc/rc.conf | grep . | tail
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="x220"
interface=eth0
NETWORK_PERSIST="no"
WIRELESS_INTERFACE="wlan0"
WIRED_INTERFACE="eth0"
DAEMONS=(syslog-ng @network @net-auto-wireless @net-auto-wired @crond @cpufreq @alsa @sshd @httpd)
Be great how if someone would be kind enough to hint how I should move this to /etc/conf.d/netcfg.
Also it would be great if http://projects.archlinux.org/netcfg.git/ was on github so I could sanely report bugs.
Thanks in advance,

The fink version ( /sw/bin/which ) does what you're looking as well--it doesn't recognize aliases though. tcsh and OS X's csh (which happens to be a duplicate of the tcsh executable) do recognize aliases.
I guess the script (/usr/bin/which) is there to either echo one's path when a command's not found or give a different response to aliases. Otherwise one could change the script to:
#! /bin/csh -f
which $arg
exit($?)
Note the added -f...this prevents aliases from being set by csh when they don't exist in the bash shell. But neither script will recognize aliases set in a bash shell.
TiBook G4 Mac OS X (10.3.9)

Similar Messages

How to trap null return values from getters when using Method.invoke()?

Hi,
I am using Method.invoke() to access getters in an Object. I need to know which getters return a value and which return null. However, irrespective of the actual return value, I am always getting non-null return value when using Method.invoke().
Unfortunately, the API documentation of Method.invoke() does not specify how it treats null return values.
Can someone help?
Thanks

What do you get as a result?I think I know what the problem is.
I tested this using following and it worked fine:
public class TestMethodInvoke {
public String getName() {
return null;
public static void main(String args[]) throws SecurityException, NoSuchMethodException, IllegalArgumentException, IllegalAccessException, InvocationTargetException {
Object o = new TestMethodInvoke();
Class cls = o.getClass();
Method m = cls.getMethod("getName", (Class[]) null);
Object result = m.invoke(o, (Object[])null);
if (result == null) {
System.err.println("OK: Return value was null as expected");
else {
System.err.println("FAILED: Return value was NOT null as expected");
However, when I use the same technique with an EJB 3.0 Entity class, the null return value is not returned. Instead, I get a String() object. Clearly, the problem is the the EJB 3.0 implementation (Glassfish/Toplink) which is manipulating the getters.
Regards
Dibyendu

RE: (forte-users) Reading return value from Javaprogram

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Job scheduling error : The return value was unknown. The process exit code was -1073741819. The step failed.

I am working in Sqlserver 2008 R2, SSIS 64 bit version
I am getting the below error while scheduling the job in the development server Database.
The return value was unknown. The process exit code was -1073741819. The step failed.
The SSIS front end execution runs fine.
Have anyone faced this issue before?

Hi Venkat,
If you already changed to 64bit and still doesn't work then create proxy account..
To create a proxy account
In Object Explorer, expand a server.
Expand SQL Server Agent.
Right-click Proxies and select New Proxy.
On the General page of the New Proxy Account dialog, specify the proxy name, credential name, and
description for the new proxy. Note that you must create a credential first before you create a proxy if one is not already available. For more information about creating a credential, see How
to: Create a Credential (SQL Server Management Studio) or CREATE CREDENTIAL (Transact-SQL).
Check the appropriate subsystem for this proxy.
On the Principals page, add or remove logins or roles to grant or remove access to the proxy account.
Thanks

How to call a dialog program with return value in another dialog program

Dear All,
How can I call a dialog program with return value from another dialog program?
Regards,
Alok.

Hi Alok,
You can you SET/GET parameters to do this.
This is some information about this.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETERstatements.
To fill one, use:
SET PARAMETER ID pid FIELD f.
This statement saves the contents of field f under the ID pid in the SAP memory. The ID pid can be up to 20 characters long. If there was already a value stored under pid, this statement overwrites it. If you double-click pid in the ABAP Editor, parameters that do not exist can be created as a Repository object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID pid FIELD f.
This statement places the value stored under the pid ID into the variable f. If the system does not find any value for pid in the SAP memory, sy-subrc is set to 4. Otherwise, it sets the value to 0.
Thanks,
SriRatna

Display pass or fail in Report based on return value

Hi,
I'm trying to integrate TestStand with TestComplete using the ActiveX/COM server adapter. I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete return a string value (true|false) to TestStand.
Now I need to get the TestStand report to display "pass" or "fail" text for this sequence call,  based on the return string from TestComplete.
Is there someplace in Expressions or Post Actions that I can state and how:
return value "True" = pass
return value "false" = fail
Thanks.
Solved!
Go to Solution.

Hi,
Option 1.) Use a String Value Test.   The Limits.String would be 'True'. This would be the easiest because you already returning strings from your ActiveX call.   You could make your ActiveX calls a String Value Test.
Option 2.) Use a Pass/Fail Step.   You could set the returned string to a local variable and then create another Pass/Fail step that would have the Pass/Fail criteria as Locals.StringReturned == 'True'
These are two options that hopefully can get you started....
Thanks,
PH

Sending a return value without pass/fail message

Hi,
I'm using the COM adapter to talk TestComplete application.
I have a string value test step to evaluate a return value and determine if it's pass or fail (e.g. return 0 = pass, return 1 = fail). This works perfectly.
However, I have added another return value (e.g. return 2), the code executed fine, but it keeps displaying that step as "Failed", which is annoying. Is there a way to suppress this failed message?
Basically, here's what I need to do, return 0= display pass, return 1 = display fail, return 2 = display no message or just display done.
Thanks so much!
Solved!
Go to Solution.

The String Value Test step type only evaluates to Passed or Failed. It does not do a tristate. In fact any of the step types in the Tests (Pass/Fail Test, Numeric Limit Test, Multiple Numeric Limit Test, String Value Test) will always be pass or fail. They never evaluate to just done.
The Status Expression is what makes a step Pass or Fail. Unfortunately with the default steps you cannot change the Status Expression. You have to create a custom step type to do that.
What are you setting your Step.Result.String to? Or did you change the Data Source?
Here are 3 options:
1- Create a custom step based on the String Value Limit test and change the Status Expression such that you get your desired behavior
2- Use and Action step and change the Status Expression such that you get your desired behavior.
3- Continue using the step you are using but in the Post-Expression place some logic which turns off the Step.StepFailCausesSequenceFail if you are in return 2 state
http://zone.ni.com/devzone/cda/tut/p/id/4302
Hope this helps
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

Hi,
I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
Steps done:
1) DB instance prepared
2) Created Siebel installation image
3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
Here are the errors I got in the log files sw_cfg_util*.log
<EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
Does anybody know what is the reason?
Searching in Metalink and Google were fruitless..
Thank you in advance.

Just in case anybody bumps in this thread:
The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
Applies to:
+Siebel CRM - Version: 8.1.1 SIA [21111] and later [Release: V8 and later ]+
Linux x86
Symptoms
Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
The error on sw_cfg_util_xx.log is as follows,
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
Reproduce steps:
- confirm that siebel server was created before, and is stopping.
- create sh env and enter the following command to remove the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "3 - Remove Existing Configuration".
- complete the configuration wizard.
- enter the following command to create the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "1 - Create New Configuration".
- continue inputs to finish and execute the configration.
+==> you'll find "Execution Failed".+
Cause
AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
Solution
You can do either of follows,
+(1) Uninstall and Install the Siebel Server again.+
+(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
+[Step]+
Name = AddSrvrRegistryEntry
Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
Edited by: mmango on Jan 31, 2012 12:21 AM

Execution flow doesn't wait for return values

I have created JNI wrappers for existing dlls. However I'm getting weird behavior. My Java function calls a c function which communicates with an old mainframe. If I retrieve one row at a time its fine but if I do a loop the virtual machine crashes. Sometimes, if I add an empty loop for (30000 iterations) then its fine. Its like java is already trying to retrieve the next row while the first row is still being printed on my screen. I've tried adding synchronized in case the dlls where multi-threaded but it has not made a difference. Is there any way to control the execution flow so that it can't go to the next line until the values are truly returned from the c dll.
thanks
MA

There are many function being called on the native side. Since I didn't want to modify the native side
(because the old dlls are used by another application), I added my own dll as an intermediary between the old c dlls and the java side.
To fix the problem I am having, I've heard of another project where the native side would write the returned values to a file and only once the file is written can the Java side continue. Is this the only way to control the execution flow?
Right now I have about 5 empty loops which run to 100000 and things work most of the time. But I would prefer to find a way to say wait until the values are returned correctly.
Essentially, what I'm doing is
for (int i=1;i<10; i++){
   test.init(Integer.toString(i),Integer.toString(i),"english desc"+ Integer.toString(i),"french desc"+ Integer.toString(i));
   test.execute(test.ActionAdd);
}This is supposed to add one row with four fields. I'm just putting junk for the test. If I call the two main lines
test.init(Integer.toString(i),Integer.toString(i),"english desc"+ Integer.toString(i),"french desc"+ Integer.toString(i));
test.execute(test.ActionAdd);just once it works fine but if I loop them then it crashes after a few loops. If I put a loop as shown below then it works fine. This is part of the code when I'm adding. Is it being looped 10 times from the code above.
jsession.scanTable(table,errorlist);
            rtc = table.getRecordCount(errorlist);
            if (rtc > 0)
            publish(rtc+" records found.");
                for(int i = 1; i <= rtc; ++i)
                    for (int j = 0; j < ElementName.size();j++)
                        publish((String)ElementName.get(j)+ ": " + table.getFieldByName((String)ElementName.get(j),i,errorlist));
                        for (int k = 0; k<100000;k++);
            else
                publish("No records found.");
            }In the code, when the rows are added, I print them out just to make sure they were added correctly. This is where I got the idea that the Java code was not in synch with the native side because it would crash while writting out a line but it didn't happen every time at the same place.
This is the function getFieldByName
public String getFieldByName (String p_FieldName, int p_LineNum, ErrorList p_Errors)
          String retval = "";
          int ret;
          try
               p_FieldName = prepareFieldName(p_FieldName);
               retval = new String();
               ret    = 0;
               if (this.ptrTableView == NOT_SET)
                    p_Errors.addMessage(p_Errors.SEV_SYSTEM_ERROR(), "Table View Pointer not set");
                    throw (new Exception());
               // allocating string buffer for value returned
               StringBuffer m_FieldValue = new StringBuffer();
               // determining length of value
               int m_length[] = {0};
               ret = gti.GetFieldLen(this.ptrTableView, p_FieldName, m_length, eb.getErrorBlockPtr());
               if (m_length[0] == 0) m_length[0] = 100;
               m_FieldValue = new StringBuffer(m_length[0]);
               // get line field
               ret = gti.GetLineField(this.ptrTableView, p_FieldName, p_LineNum, m_FieldValue, eb.getErrorBlockPtr());
               if (ret != 0)
                      p_Errors.addMessage(p_Errors.SEV_ERROR(), "Error retrieving field value ("+p_FieldName+")");
               else
                      retval = m_FieldValue.toString();
          catch (Throwable t)
               p_Errors.addMessage(p_Errors.SEV_ERROR(), "Error retrieving field value ("+p_FieldName+")");
          return retval;
    }The main functions are
GetFieldLen
GetLineField
They go to the native side through my dll which wraps the old dlls.
Here are is one of the main functions in my dll. I also have the source for the functions they are calling but they are calling other functions which are calling other functions. There is a lot of code . Yes, they use arrays.
JNIEXPORT jint JNICALL Java_advantagewrapperspk_GtiNative_GtiGetLineField
(JNIEnv *env, jclass cls, jint p_tableViewPtr, jstring VIEWFIELDNAME, jint VIEWFIELDNUM, jobject VIEWFIELDVALUE, jint iErrBlockPtr)
     //printf("\n\nGtiGetLineField in C:\n");
     jint iResult = 0;
     char *temp1 = (*env)->GetStringUTFChars(env,VIEWFIELDNAME,0);
     char *temp2 = (*env)->GetStringUTFChars(env,VIEWFIELDVALUE,0);
     iResult = GtiGetLineField(p_tableViewPtr,temp1,VIEWFIELDNUM,temp2,iErrBlockPtr);
     //printf("VIEWFIELDNUM %d ",VIEWFIELDNUM);
     //printf("\ntemp1 %s ",temp1);
     //printf("\ntemp2 %s ",temp2);
     (*env)->ReleaseStringUTFChars(env,VIEWFIELDNAME,temp1);
     if (temp2 == 0)      return iResult;
    if (temp2 != NULL)
            cls = (*env)->GetObjectClass(env,VIEWFIELDVALUE);
            jmethodID mid = (*env)->GetMethodID (env,cls,"append","(Ljava/lang/String;)Ljava/lang/StringBuffer;");
             if (mid == 0) return iResult;
             jstring sfinal = (*env)->NewStringUTF (env, temp2);
            (*env)->CallObjectMethod(env,VIEWFIELDVALUE,mid,sfinal);
          if (VIEWFIELDVALUE != NULL) (*env)->ReleaseStringUTFChars(env,VIEWFIELDVALUE,temp2);
     //(*env)->ReleaseStringUTFChars(env,VIEWFIELDVALUE,temp2);
     return iResult;
}This calls
* Function Name : GtiGetLineField()
* Description   : Retrieves the value of a line field in a table view
* Parameters    : pTableViewPtr pTableView--the table view from which to
*                                           retrieve the value of a line
*                                           field
*                 VIEWFIELDNAME szFieldName--the name of the line field
*                                            whose value is returned
*                 VIEWLINENUM iLineNum--number of line from which to retrieve
*                                       field value. Lines are numbered
*                                       beginning with 1.
*                 VIEWFIELDVALUE szFieldValue--returns the value of the
*                                              line field
*                 ErrBlockPtr sourceeb--error context info from calling
*                                       function
* Return values : int--returns RCT_RETURNOK, RCT_WARNCORECONNECT, or
*                      RCT_FAILCORECONNECT
* Modifications : REH - 05/25/93
int GtiGetLineField ( TableViewPtr pTableView,
                      VIEWFIELDNAME szFieldName,
                      VIEWLINENUM iLineNum,
                      VIEWFIELDVALUE szFieldValue,
                      ErrBlockPtr sourceeb )
   int iRc ;      /* return code */
   ELOG_INIT( sourceeb,
              "GtiGetLineField",
              "retrieving the value of a line field in a table view" ) ;
   /* in Gti, we start numbering lines from 1, because that is the way a user
      sees them on the screen. In Ldm, following C conventions, we start
      numbering lines at 0. So in LdmSetField, we subtract 1 from iLineNum */
   iRc = LdmGetField( pTableView->pTran,
                      szFieldName,
                      szFieldValue,
                      iLineNum - 1,
                      0,                  /* map occurrence = 1 */
                      ELOG_ERRBLOCK ) ;
   /* in case Ldm returned a warning, indicate so to the calling function */
   iRc = ( iRc == LDM_RETURNOK ) ? RCT_RETURNOK : RCT_WARNCORECONNECT ;
   return( iRc ) ;
   /* if exception was raised, it was due to COREConnect */
   ELOG_END( RCT_FAILCORECONNECT ) ;
}which calls
/****************************** API Header *********************************\
* API Name: LdmGetField
* This function copies the string value of a specified FIELDNAME into a
* buffer specified by FIELDVALUE. The string is NULL terminated.
* The first OCCUR determines which occurrence of the field in the map.
* The second OCCUR determines which occurence of the map in the transaction
* area. Remember that occurrences are numbered like C arrays: a transaction
* with ten occurrences of a field will have fields numbered zero through
* nine.
* It is assumed that FIELDVALUE has enough space to accommodate the field's
* value.
int LdmGetField( HTRAN       htran,
                 FIELDNAME   fieldname,
                 FIELDVALUE fieldvalue,
                 FIELDOCCUR fieldoccur,
                 MAPOCCUR    mapoccur,
                 ErrBlockPtr seb )
   ELOG_INIT ( seb, "LdmGetField", "getting transaction field value" ) ;
   if ( htran->Occurrence <= mapoccur ) {
      ElogFail1( LDM_FAILOCCNOTFOUND, htran->TranName ) ;
   } /* END if. */
   /* Since 'blank' values for field or map occurrences are zero, there
      is no need to set a default. */
   LdmsGetField( htran->Map->CCMap,
                 htran->TranData,
                 fieldname,
                 fieldvalue,
                 fieldoccur,
                 mapoccur,
                 ELOG_ERRBLOCK ) ;
   return( LDM_RETURNOK ) ;
   ELOG_END ( ELOG_ERRBLOCK->Rc ) ;
} /* END LdmGetField. */which calls
/****************************** API Header *********************************\
* API Name: LdmsGetField
* Put the value of FIELDNAME into FIELDVALUE. The field must be an element
* of the specified map. The new value will be set in the specified data
* buffer. The occurrences refer to the occurrence of the field in the map
* and the occurrence of the map in the data buffer.
int LdmsGetField ( CCMapPtr    rcmap,
                   char        *dataarea,
                   FIELDNAME   fieldname,
                   FIELDVALUE fieldvalue,
                   FIELDOCCUR fieldoccur,
                   MAPOCCUR    mapoccur,
                   ErrBlockPtr seb )
   ElementPtr element ;
   char       *fieldoffset ;
   ELOG_INIT ( seb, "LdmsGetField", "getting a field of a map" ) ;
   /* Search the transaction definition area (map) for matching
      FIELDNAME. If found, copy FIELDVALUE to defined offset in
      transaction buffer. */
   element = LdmsFindField( rcmap, fieldname, fieldoccur, &localeb ) ;
   /* Copy the value from the transaction data area into FIELDVALUE. */
   fieldoffset = dataarea +
                 ( ( rcmap->BufferLength * mapoccur ) + element->Offset ) ;
   strncpy( fieldvalue, fieldoffset, element->Length ) ;
   fieldvalue[ element->Length ] = '\0' ;
   return( LDM_RETURNOK ) ;
   ELOG_END ( ELOG_ERRBLOCK->Rc ) ;
} /* END LdmsGetField. */and on it goes
I gather from your question about arrays that they might be the source of the problem. Could it be that the pointer to the array is returned while the array is not completed? Any information would help. Thanks.

Not getting the return value of a program though it has no errors

public static String giroReturnFileDate(String strType)throws IOException{
          try{
               SimpleDateFormat getFormatDate = new SimpleDateFormat("yyMM");
               Date date = new Date();
               String str = getFormatDate.format(date);
               System.out.println("Current Date is : "+ str);
               System.out.println("Fetching the Giro file now");
               if(strType.equalsIgnoreCase("WPD") || strType.equalsIgnoreCase("ISTD")) {
               FileReader inputFileReader = new FileReader("giro2itcs_"+strType+".txt");
               ArrayList list = new ArrayList();
               ArrayList list1 = new ArrayList();
               System.out.println("Reading the file");
               BufferedReader inputStream = new BufferedReader(inputFileReader);
               String inLine = null;
               String str1 = null;
               while((inLine = inputStream.readLine()) != null && inLine.length() < 2)
                    list.add(inLine);
               System.out.println("Control Record for giro2itcs_"+strType+"is:"+ inLine);
               inputFileReader.close();
               inputStream.close();
               for (int i=0; i<inLine.length(); i++ )
                    str1 = inLine.substring(19,23);
               System.out.println("date of the transaction is:"+str1);
               if (str .equals(str1)){
                    System.out.println("giro2itcs_"+strType+".txt file is created today");
                    return "true";
               else{
                    System.out.println("giro2itcs_"+strType+".txt file is not created today");
                    return "false";
               }// end of if
               return "test";
          }// end of try
          catch(Exception e) {
          System.out.println("The Exception is ::::::::::::::"+e);
return "one";
}//end of giroReturnFileDate(...) method
}//end of of the class
main method is seperate. this program compiles fine but am not getting the return value for this. none of the return values. plzzz help me.

can you send me the code complete one ...
i will debug and solve the problem
[email protected]
By publishing your email address you are likely to get loads of spam.

PROBLEM IN GIVING RETURN VALUES IN SECOND PROGRAM GROUPING IN BENEFITS MODU

HI EXPERTS..
what could be the return values for the bstat if we define 2 nd progarm grouping as different geographical locations?
Is it possible to use geographical locations in defining first program grouping or second program grouping?
Please give u r valiuable advice..
thanks in advance.
sairam

HI EXPERTS..
what could be the return values for the bstat if we define 2 nd progarm grouping as different geographical locations?
Is it possible to use geographical locations in defining first program grouping or second program grouping?
Please give u r valiuable advice..
thanks in advance.
sairam

[svn:fx-trunk] 11523: Fix return values for ASyncListView/setItemAt(), removeItemAt(): return failed items if they exist.

Revision: 11523
Author:   [email protected]
Date:     2009-11-06 11:58:50 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix return values for ASyncListView/setItemAt(),removeItemAt(): return failed items if they exist.
QE notes:
Doc notes:
Bugs: sdk-24078
Reviewer: Evtim
Tests run: AsyncListView Mustella tests pass
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24078
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

How to get return value from java and read by other application?

i want to read return value from java and the other application read it.
for example:
public class test_return {
    test_return(){
    public int check(){
        return 1;
    public static void main(String args[]){
       new test_return().check();
}from that class i make as jar file. How to read the return value (1) by other application?
thx..

If your installer is requiring some process it invokes to return a particular value on failure, then the installer is seriously broken. There are a bazillion commands your installer could invoke, and any of them could fail, which in turn could invalidate the entire install process, and any of them could return any value on failure. The only value that's consistent (in my experience) is that zero means success and non-zero means failure, with specific non-zero values being different in different programs.
About the only control you have over the JVM's exit code is that if your main method completes without throwing an exception, the JVM will have an exit code of 0, and if main throws an exception (either explicitly or by not catching one thrown from below), it will be non-zero. I'm not even sure if that's guaranteed, but I would guess that's the case.
EDIT: I'm kind of full of crap here. If you're writing the Java code, you can call System.exit(whatever). But nonetheless, if your installer requires certain exit codes from any app--java or otherwise--you have a problem.
Edited by: jverd on Oct 29, 2009 1:27 AM

Formatting the return value of: File(myFile).lastModified()

I'm checking file date and time stamps:
myDate = File(myFile).lastModified()Is there a way to format the return value?
myDate equals: 1205166439145I'd like to see something like:
03/10/2008 12:27 PMI'm using the following code to print the value:
System.out.println(myDate);

Awesome! I really, really appreciate the help and the sample code!
Successful Output:
K:\COMMON\ITS\STEVEB\java\CompareFileDates>java CompareFileDates
execution continuing...
test1.steve (3/10/08 12:27 PM) is older than test2.steve (3/10/08 1:33 PM)Error free code:
import java.io.File;
import java.lang.Object;
import java.util.Date;
import java.text.Format;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
public class CompareFileDates {
public static void main(String[] args) {
    String file1_stat = null;
    String file2_stat = null;
    String file1 = "test1.steve";
    String file2 = "test2.steve";
    long date1 = 0;
    long date2 = 0;
    String finalDate1 = null;
    String finalDate2 = null;
    boolean file1Exists = (new File(file1)).exists();
    if (file1Exists) {
        // File or directory exists
        file1_stat = "does exist";
        // Get the timestamp from file 1 and format it
        date1 = (new File(file1)).lastModified();
     Date newDate1 = new Date(date1);
     DateFormat df = new SimpleDateFormat();
     finalDate1 = df.format(newDate1);
     //System.out.println(file1 + " date: " + finalDate1);
    else {
        // File or directory does not exist
        file1_stat = "does not exist";
    boolean file2Exists = (new File(file2)).exists();
    if (file2Exists) {
        // File or directory exists
        file2_stat = "does exist";
        // Get the timestamp from file 2 and format it
        date2 = (new File(file2)).lastModified();
     Date newDate2 = new Date(date2);
     DateFormat df = new SimpleDateFormat();
     finalDate2 = df.format(newDate2);
     //System.out.println(file2 + " date: " + finalDate2);
    else {
        // File or directory does not exist
        file2_stat = "does not exist";
    if ((file1Exists == false) || (file2Exists == false)) {
            System.out.println("aborting program...");
    else {
       System.out.println("execution continuing...");
       String relation;
       if (date1 == date2)
         relation = "the same age as";
       else if (date1 < date2)
         relation = "older than";
       else
         relation = "newer than";
       System.out.println(file1 + " (" + finalDate1 + ")" + " is " + relation + ' ' + file2 + " (" + finalDate2 + ")");
}

Ifplugd(eth0)[540]: Program execution failed, return value is 1.

Similar Messages

Maybe you are looking for