IFS message no longer working in version 1.1.9

The following code worked correctly with version 1.1. I am wondering if the API has changed for the ifsMessage class. If so, where can I find the javadocs for the newer API?
public void sendMail(String subject) {
try {
allocateConnection();
ifsSession.setAdministrationMode(true);
IfsMessage msg = new IfsMessage(ifsSession);
msg.setToHeader(new String[] {SSU_NOTIFY_EMAIL});
msg.setFromHeader(SSU_FROM_EMAIL);
msg.setSubject(subject);
msg.setContentType("text/plain");
msg.send();
releaseConnection();
catch(Exception e){
System.out.println("Error in mail message = " + e);
}// end sendMail
Thanks,
Tony

There are no error messages. If I take out the call to this method everything works fine. When I leave in the call to this method I get a blank screen and no mail sent. Just before the version change the mail worked with the exact same code.
Thanks,
tony

Similar Messages

  • IPad messages no longer works after ios7 upgrade

    After upgrading to ios7 on my iPad messages no longer works.
    After I enter To: I am unable to get to the message field to enter the message.
    Reboot does not solve the issue,

    This issue has been resolved!

  • TS2755 Messages no longer works with iOS 6.

    Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

    Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on  iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att  take techline 15 minutes and imessage and text messages working ok

  • I recently downloaded iOS 6 and since then, my shortcuts for messaging no longer work, I've tried resetting it, and deleting and re-entering them.

    I recently downloaded iOS 6 and since then, my shortcuts for messaging no longer work, I've tried resetting it, and deleting and re-entering them.

    Use the yahoo app if available?

  • Scroll Wheel no longer works in version 4.4 RC

    My scroll wheel no longer works after installing Lightroom 4.4. In all previous versions, I was able to use my Logitech scroll device to adjust the sliders in the development panel.  In the 4.4 version, the scroll wheel no longer works and instead of adjusting an individual slider, it scrolls the whole development panel up and down. I did uninstall the mouse driver and reinstalled but that did not work. The mouse works just fine in all other programs. I think it is a bug with the 4.4 version. I am operating in Windows 7. Any suggestions for a fix?

    Ah....
    http://feedback.photoshop.com/photoshop_family/topics/you_broke_4_4_part_of_it_anyway

  • Instant Messaging no longer works for me..why?

    Instant Message came pre-loaded on my iPad 2 when purchased over 2 years ago.  Always worked.  Ever since downloading IOS7 and related fix-packs, no longer works.  Ive gone to Settings and what I see does NOT match the directions apple.support.  What is going on?  Do I need a reloaded app from the Appke Store?  If so, which one?  Maybe I need an appt with my local apple store for a look-see.  Yes, I've shut the iPad down altogether and brought it back up but it still is not working.  So annoying,

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • JNI Calls to Native Methods No Longer Work: Possible Versioning Issue ?

    Hello, all. Just a quick question... is it possible that invoking a method in a JNI-compliant DLL from Java 6 will fail if the DLL's source was compiled against the JNI header files from Java 4 or 5 ? I have a DLL with methods that used to be called successfully (and now fail outright and don't even seem to be getting inside the native method), but it seems that the only thing that could have changed in the environment is the installed JRE. Even stranger, I don't get the hs_err* files anymore to indicate that the JVM crashed. Does anyone know why this might happen ? Thanks !

    Cthulhu76 wrote:
    Hello, all. Just a quick question... is it possible that invoking a method in a JNI-compliant DLL from Java 6 will fail if the DLL's source was compiled against the JNI header files from Java 4 or 5 ? Solely? No.
    You could of course be doing something in the JNI code in terms of working with Java which no longer works. Just as it is at least possible that java code from one version might not work with another.
    Correct error checking in the JNI code would at least correctly identify this problem however.
    I have a DLL with methods that used to be called successfully (and now fail outright and don't even seem to be getting inside the native method), but it seems that the only thing that could have changed in the environment is the installed JRE.The only thing that you assume changed was the JRE.
    You seem unsure whether the JNI is being called at all, so verifying that first would be a good idea.

  • Messages no longer working on Macbook Air

    since the latest software update on my Macbook Air my messages no longer functions. No incoming messages even when they are there on my iPhone. Jabber showed up and i disabled that and ensured imessage account was enabled.

    Hello sirrobert,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Messages (Mavericks): Set up your accounts
    http://support.apple.com/kb/PH15055?viewlocale=en_US
    Messages (Mountain Lion): Fix iMessage issues
    http://support.apple.com/kb/PH12065
    Have a nice day,
    Mario

  • Noscript no longer works with version 8.01

    Addon "noscript" no longer runs with version 8.01, why?

    Can you please let us know the configuration details? Which
    OS/webserver/install mode (mutliserver etc)?
    Thanks,
    Praveen.

  • Messages no longer working after 10.9.2 update

    Hello.
    I ran the 10.9.2 update last night. Immediatly after rebooting, Messages on my Mac was no longer functioning properly in that it is no longer in sync with my iphone. People I have been chatting with can no longer send me text via iMessage but now must send via standard SMS text. Additionally, their texts no longer show up on my Mac (althouth they are coming through on my iPhone), but whatever I send via Messages still shows up immediately on my iPhone. Messages is now totally jacked and I use it a ton for both work and friends. Any thoughts?
    MacBook Air, Mavericks 10.9.2
    Messages 8.0
    IOS 7.0.6 on a iPhone 4
    Verizon Wireless

    Please sign out of iMessage and sign back in. Test.

  • My auto-scale background photo on my site no longer works since version 14 it also depends on scrollbar!

    Please have a look at my site www.roosboum.nl and try ctrl- and ctrl+ to zoom. If you compare this with any version of IE or Chrome you'll find that since version 14 FF has stopped properly outlining the backgroundimage.
    Also I noticed in other pages, it sometimes works better if you add and remove(!) the searchbar with Ctrl F, that it's suddenly adapts to what it should have been in the first place.
    Also when using a vertical taskbar in windows, FF does not see this and a horizontal scrollbar is displayed which I find highly unworkable. I now have to zoom out to see the page with scrollbar :-(
    I've seen these issues on three totally different pc's and can't resolve the issue cause it was working well for years! This is a major setback cause I always advertise for using FF and now my main site is no longer displayed well.
    I'm not far away from going back to chrome which I can't emphasize enough is pure disapointment.
    I'm a technician and programmer, you can ask me for any detail as you feel fit. I'm glad to be of any help. Awaiting your reply,
    Erwin van Dijk

    Note that you use &lt;br> tags to position the menu bar, so increasing the font size or otherwise make changes that effect the text zoom can move that menu bar down.<br />
    I also see a repeat of the top background image if full page zoom is disabled (i.e. Zoom > Zoom Text Only is selected).
    You should find a better way to position that part of the page.
    A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the MozillaZine forum site in order to post at that forum.

  • Javascripting no longer works on version 23 breaks ckeditor

    My website ZenCart uses CKEditor in the admin to update product and web pages. I just replaced my hard drive and download the newest version of Firefox. The new version 23 breaks CKEditor - it no longer shows up and allows me to edit my products and pages within ZenCart. I put the old hard drive back in my machine with version 22 and CKEditor is working. I went to the content page it shows "Load Images automatically" and "Enable Javascript". I unchecked "Enable JavaScript" in version 22 and CKEditor did the same thing that it does in version 23. So I know the problem is with Version 23 because "Enable JavaScript" is now missing from the Content page under Options. This issue has basically could put me out of business because I can't add or change produce without CKEditor.
    I've been working and searching the internet for a solution for 3 days. Please help me.

    I found the solution without upgrading CKEditor. To the left of the address bar was a small icon. I double clicked on it. It said something about security issue with javascripting. I said to allow on this website. The CKEditor interface showed up. This fixed my problem.
    Thanks for everyone's help.

  • Correlation of AQ messages no longer working in 10.1.3.3

    Does anyone have the same problem as we do in correlating an outbound (enqueued) and an inbound (dequeued) AQ message in BPEL? This is the functionality as demonstrated in example 124.AQAdapter/AQOutboundCorrelation where the request and response wsdl's are combined into a single wsdl and the adapter can correlate the response message to the request message....
    We have a number of BPEL processes where a request is enqueued and the response to that specific request has to be dequeued for further processing.
    This used to work fine in the 10.1.2 version but since version 10.1.3.3 we get this error:
    Failed get wsdl service definition.
    Failed to get a WSDL service that support the portType "{http://xmlns.oracle.com/pcbpel/adapter/aq/RequestIn/}Enqueue_ptt" in WSDL definition "{http://xmlns.oracle.com/pcbpel/adapter/aq/inbound/}aqAdapter".
    Please verify that WSDL portType "{http://xmlns.oracle.com/pcbpel/adapter/aq/RequestIn/}Enqueue_ptt" is supported by a service in WSDL file.
    it looks like the request port type is to be available in the inbound (ie response) AQ adapter wsdl?!
    does anyone have a clue?

    i don't have any ideas abt load condition and threads etc.
    but i have found the answer to the question i posed above where i wanted help regarding AQ correaltion to work with correlation headers.
    for native adapter correlation to work the send and receive should point tot he same aprtner link also the header values are mapped in such a way that outbound header of messageId should be smae as the correlation header of incoming message. IF such is the case adapter framework correlates the 2 messages.
    the exampls 124 works fine in 10.1.3.1 alonwith use of sql scripts.
    we can also model another BPEL process whihc shall do the job being done by sql script in the example above.
    in the exampls bpel\samples\tutorials\124.AQAdapter\AQOutboundCorrelation
    The AQOutboundCorrelation is the sender process where the native adapter correlation works. This project also contains the sql scripts to create the AQ queues and to transfer data from out queue to in queue.
    The receiver BPEL is designed pick from “out” queue process the message and put it in “in” queue also it extracts message id from in message and copies it to correlation of out message.

  • Copy and Paste function no longer works in version 3.6

    Ever since I upgraded to version 3.6 (finally after waiting for all of the crash bugs to be fixed after having to downgrade last fall) now the simple copy & paste function won't work when copying from one webpage to put link or paragraph of text into the body of an e-mail, through any of my web based mail services (Yahoo, Onebox, etc.)
    So, when doing all of this version updating how could Mozilla allow such a simple function used in every program since the invention of the computer... to be disabled?

    Im having this problem, and although it took time to tell because it is intermittent, it still happens when all add-ons & theme are manually disabled.
    I would have to test safe mode a little bit longer to be sure it didnt happen there.
    It also affects other programs (like my metapad- notepad replacement) as long as firefox is open, but does not when the browser is closed, as far as I can tell.
    (version 3.6.12)
    It may or may not be related, but there's also a flicker
    (black screen in page window for an eyeblink) when firefox
    opens or returns from maximized state, and when it opens a menu.
    Both bugs only recently started.

  • HELP! Delete message no longer works in Hub on Q10

    The touch and hold to highlight and delete a message from within BB Hub (i.e. without opening the message) on my Q10 just suddenly stopped working! Not sure when it stopped working exactly - just in the past week or two - and the only *possible change I made lately is upgrading BBM...but I don't use BBM so I highly doubt it's that. My software is fully up to date and I've tried powering off and on again. No luck. I've looked at all the guidance and manuals and forums and can't see any settings I might have inadvertently unset or anyone else with the same issue.
    Anyone have any suggestions? Do we think this is a software or hardware issue? (Except I'm ruling out hardware because there are no other issues with my touch screen functionality).
    Any help more than welcome!!
    Karen
    Solved!
    Go to Solution.

    Try a reboot by removing the battery.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for

  • Videos not opening in iphoto

    hi- i recently transferred everything to a new macbook, and now none of my videos in iphoto will open or play. any help would be much appreciated. -Jenny

  • Bank Recon.

    Hello Sap Guru, My client have maintained two UTI Bank account, One for Reconciliation & One for UTI Current Account .In Reconciliation account so many Open Item are there. Now he wants clear these Open Item ,how it can do this & effected in my UTI C

  • Item 'stored' on the right side of the tool bar of every file

    When I open any file there is a file stored on the right side of the tool bar ( in my case the movie Hotel Translyvania). If I double click it the movie will start, however, I don't want it to be there. How do I remove it? How did it get there in the

  • R/3 - MDM field Mapping

    Hi All, I am looking for latest R/3 and MDM field mapping for Customer, Vendor, material and Product. I already have IDoc to MDM mapping included in SAP business content. But i am looking for R/3 and MDM field mapping. it would be of great help for m

  • Vision Builder 7.1

    Mi programa lo realicé en LabVIEW 7.1 versión estdiantil, y tengo el LabVIEW Signal and Image Processing Add-Ons, igual, versión estudiantil. Las dudas que tengo son del funcionamiento del Visioin Builder 7.1 1.- En la clasificación de imágenes, el V