Ignore 2nd row and 4th row in Excel Sheet in SSIS Package
Hi All,
I have an SSIS package that imports an Excel sheet in which i have to ignore 2nd row and 4th row.
Please help me on this issue.
Hi ShyamReddy,
Based on my test, if second and fourth rows need to be skipped is based on some conditions, we can directly add where conditions in only one Excel Source with Edit Option. Otherwise, we can try to union three Excel sources to work around this issue. For
more details, please refer to the following steps:
Set the FirstRowHasColumnName property to False, so the first row stores the column names in the sheet.
Drag three Excel Sources to the Data Flow Task.
In the Excel Source, use the SQL command below to replace the former(supposing there are three columns in the Excel sheet: col1, col2 and col3):
SELECT F1 AS col1,F2 AS col2, F3 AS col3 FROM
[sheet$A2:C2]
In the Excel Source 1, please type the SQL command below:
SELECT F1 AS col1,F2 AS col2, F3 AS col3 FROM
[sheet$A4:C4]
In the Excel Source 2, please type the SQL command below (note that the ‘n’ means the number of rows in the sheet):
SELECT F1 AS col1,F2 AS col2, F3 AS col3 FROM
[sheet$A6:Cn]
Drag a Union All component to the same task, then union those three Excel Sources.
References:
SSIS Excel import skip first rows
sql command for reading a particular sheet, column
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
In ABAP reports, is there any logic to find number of rows in Excel sheet.
Regards,
Naseer.Hi,
Try this code...
REPORT zreport.
PARAMETER p_infile LIKE rlgrap-filename DEFAULT 'C:TEMPZMPR.xls'.
DATA : lin TYPE i.
DATA: itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_infile
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '1'
i_end_row = '28000'
TABLES
intern = itab
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE text-009 TYPE 'S'. "Problem uploading Excel Spreadsheet
EXIT.
ENDIF.
DESCRIBE TABLE itab LINES lin.
WRITE :/ 'Number of lines: ', lin. -
Customer and Vendor Checktables Mappings Excel sheet
Hi All,
I found buisiness partner and vendor mapping sap excel sheets from service market place.
but,not able to find similar document for vendor and customer repositories.
If anyone prepared,please mail me at [email protected]
Regards,
RamaHi Subbu,
can you pls send the customer and vendor mapping id to my email id also...
[email protected]
thanks a lot!
Jyotika -
Program Will Not Read First Row in Excel Sheet
I am having difficulty getting my program to read the first row of my excel sheet. When I use the next() method the first time it automatically starts at the second row. Here is what I have for my method that reads the data from an excel file.
package excel;
import java.sql.*;
public class Excel
public void readexel(String filename) throws SQLException
Connection c = null;
Statement stmnt = null;
try
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
c = DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Excel Driver (*.xls)};DBQ=" + filename);
stmnt = c.createStatement();
String query = "Select * from [Sheet1$]" ;
ResultSet rs = stmnt.executeQuery( query );
while( rs.next() )
System.out.print("Row #" + rs.getRow() + ": ");
System.out.print( rs.getInt(1) + " " );
System.out.print( rs.getInt(2) + " ");
System.out.println( rs.getInt(3) );
catch( Exception e )
System.err.println( e );
}Thats because the first row typically contains the column headers, and you don't want them read as data. Either insert a blank row, or put in column labels, and than you can get the column labels/names from the ResultSetMetaData.
Message was edited by:
SomeoneElse -
Hi all,
Following the tutorial "Exporting context data into Excel using the WD binary cache" I could export the contents of a webdynpro table to an Excel sheet.I would like to know whether there is any provision to change the color of rows in the generated excel sheet, based on some conditions.
Thanks n regards
Shyam.Hi Shyam,
Check this Excel data formatting
Best regards, Maksim Rashchynski. -
WBS Hirarachy Issue at 2nd , 3rd and 4th Level
Hi ,
I am loading the planning data from 3rd party system using UDC . planning data had wbs element . Planning amount will post some time at 2nd leve or 3rd or 4th or 5th Level .
I am using SAP stadard WBS hirarchy for reporting . If 5th level node has possting stadard hirachy showing perfectly because wbs hierarchy is rollup of 5th level postings and also alwasy posting at 5th level in r/3. but I am loading the data from 3rd party system so 2,3,4th levels also has postings. so 2,3,4 th level amounts are not adding into the standard hierarchy and amounts are displaying under unassigne node in WBS standard Hierarchy . 2,3,4th level amount not adding into the Stadard wbs hirarchy .
If the amount post at 5th level no issues stadard hirarchy working fine
like this
WBS
D-01----
200
D-01-01-02----
200
D-01-01-02-03----
200
D-01-01-02-03-04----100
D-01-01-02-03-04----100
If the amount post at 2nd level 3rd leve
WBS
D-01----
200
D-01-01-02----
200
D-01-01-02-03----
200
D-01-01-02-03-04----100
D-01-01-02-03-04----100
unassign nodes
d02----
300
d0505----
400
r030405----
1000 like this
Please help me how to resolve this issue . How to get 2nd level and 3rd level amounts in standard hirarchy.
Thanks
RohanTo any moderator: could you please move this post to "Desktop Environments", as it is related to Xorg and maybe someone might have an idea in this forum. Thank you. tetrapilot.
-
Identifying text file names and importing on single Excel sheet
Hey!
Does anybody can help me with Excel VBA macro code in order to import data from text files into single Excel spread sheet? I want to create User Form where user can select start and end date of interest and macro code will import
bunch of text files depending on user demands...
My text files are named: 20130619004948DataLog.txt (meaning: yyyy mm dd hh mm ss). Text file contains recordings for each 15 seconds... It would be great to omit time tail (meaning that user can only specify date). Text files for one day of interest (I have
text files covering whole year):
20130619004948DataLog.txt
20130619014948DataLog.txt
20130619024948DataLog.txt
20130619034948DataLog.txt
20130619044948DataLog.txt
20130619054948DataLog.txt
20130619064948DataLog.txt
20130619074948DataLog.txt
20130619084948DataLog.txt
20130619094948DataLog.txt
20130619104948DataLog.txt
20130619114948DataLog.txt
20130619124948DataLog.txt
20130619134948DataLog.txt
20130619144948DataLog.txt
20130619154948DataLog.txt
20130619164948DataLog.txt
20130619174948DataLog.txt
20130619184948DataLog.txt
20130619194948DataLog.txt
20130619204948DataLog.txt
20130619214948DataLog.txt
20130619224948DataLog.txt
20130619234948DataLog.txt
Option Explicit
Sub SearchFiles()
Dim file As Variant
Dim x As Integer
Dim myWB As Workbook
Dim WB As Workbook
Dim newWS As Worksheet
Dim L As Long, t As Long, i As Long
Dim StartDateL As String
Dim EndDateL As String
Dim bool As Boolean
bool = False ' to check if other versions are present
StartDateL = Format(Calendar1, "yyyymmdd")
EndDateL = Format(Calendar2, "yyyymmdd")
' I am using Userform asking user to select the date and time range of interet,
' However, I want to use only the date to filter the files having the name with that particular date
file = Dir("c:\myfolder\") ' folder with all text files
' I need assistance with the following part:
'1) How to filter and select the files between StartDateL and EndDateL_
'(including files with that dates as well)?
While (file <> "")
If InStr(file, StartDateL) > 0 Then 'Not sure if the statements inside parenthesis is correct
bool = True
GoTo Line1:
End If
file = Dir
Wend
Line1:
If Not bool Then
file = "c:\myfolder\20130115033100DataLog.txt" 'Just for a test that the code works as intended
End If
'This part for the selected text files to be loaded on a single Excel Sheet.
Set myWB = ThisWorkbook
Set newWS = Sheets(1)
L = myWB.Sheets(1).Cells(Rows.Count, "A").End(xlUp).Row
t = 1
For x = 1 To UBound(file)
Workbooks.OpenText Filename:=file(x), DataType:=xlDelimited, Tab:=True, Semicolon:=True, Space:=False, Comma:=False
Set WB = ActiveWorkbook
WB.Sheets(1).UsedRange.Copy newWS.Cells(t, 2)
t = myWB.Sheets(1).Cells(Rows.Count, "B").End(xlUp).Row + 1
WB.Close False
Next
myWB.Sheets(1).Columns(1).Delete
Application.ScreenUpdating = False
Rows("1:1").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End Sub- Make a new Excel file
- Open the VBA editor
- Add a Userform
- Place 2 text boxes and 1 command button on that form
- Paste all code below into the code module of the form
- Download this file:
https://dl.dropboxusercontent.com/u/35239054/FileSearch.cls
- In the VBA editor press CTRL-M and import that file
- Save the Excel file in the directory that contain your text files
- Run the form
You can format the columns of the sheet as you like, e.g. column E:H should be a number with 5 decimal places. The top row can contain some headings. My code did not affect the formatting or the headings.
Andreas.
Option Explicit
Private Sub UserForm_Initialize()
'Just a sample
Me.TextBox1.Value = FormatDateTime(Now, vbGeneralDate)
Me.TextBox2.Value = FormatDateTime(Now, vbShortDate)
End Sub
Private Sub CommandButton1_Click()
Dim StartDate As Date, EndDate As Date
Dim FS As New FileSearch
Dim R As Range
Dim ThisFile As Variant
Dim ThisDate As Date
Dim Data As Variant
Dim Count As Long
'Be sure we have 2 dates
If Not IsDate(Me.TextBox1.Value) Then
Me.TextBox1.SetFocus
MsgBox "No start date"
Exit Sub
End If
If Not IsDate(Me.TextBox2.Value) Then
Me.TextBox2.SetFocus
MsgBox "No end date"
Exit Sub
End If
'Convert to real dates
StartDate = CDate(Me.TextBox1.Value)
EndDate = CDate(Me.TextBox2.Value)
'Time part given?
If Fix(EndDate) = EndDate Then
'No include all files for this day
EndDate = EndDate + TimeSerial(23, 59, 59)
End If
'Correct order?
If StartDate > EndDate Then
ThisDate = EndDate
EndDate = StartDate
StartDate = ThisDate
End If
With FS
'Same path as our file
.LookIn = ThisWorkbook.Path
.FileName = "*DataLog.txt"
'Search all files sort by file name
If .Execute(msoSortByFileName, msoSortOrderAscending) = 0 Then
MsgBox "No data files found in " & .LookIn
Exit Sub
End If
'Clear previous data
Set R = Range("A2").CurrentRegion
If R.Row < 2 Then Set R = R.Offset(1)
R.ClearContents
'Show the user that we are working
Application.Cursor = xlWait
DoEvents
For Each ThisFile In .FoundFiles
'Get the date from the file name
ThisDate = Filename2Date(ThisFile)
'Between our dates?
If (ThisDate >= StartDate) And (ThisDate <= EndDate) Then
'Import at the end of the data
Set R = Range("A" & Rows.Count).End(xlUp).Offset(1)
Data = ReadCSV(ThisFile)
R.Resize(UBound(Data) + 1, UBound(Data, 2) + 1) = Data
Count = Count + 1
End If
Next
End With
'Done
Application.Cursor = xlDefault
If Count = 0 Then
MsgBox "No files match your dates"
Else
MsgBox Count & " files imported"
'Hide the form
Me.Hide
End If
End Sub
Private Function Filename2Date(ByVal Fullname As String) As Date
'Convert e.g "C:\20130601142648DataLog.txt" to the date "01.06.2013 14:26:48"
Dim i As Long, j As Long
i = InStrRev(Fullname, "\")
If i > 0 Then Fullname = Mid(Fullname, i + 1)
Fullname = JustNumbers(Fullname)
If Len(Fullname) <> 14 Then Exit Function
Filename2Date = _
DateSerial(Mid(Fullname, 1, 4), Mid(Fullname, 5, 2), Mid(Fullname, 7, 2)) + _
TimeSerial(Mid(Fullname, 9, 2), Mid(Fullname, 11, 2), Mid(Fullname, 13, 2))
End Function
Private Function JustNumbers(ByVal What As String) As String
'Return only numbers from What (by Rick Rothstein)
Dim i As Long, j As Long, Digit As String
For i = 1 To Len(What)
Digit = Mid$(What, i, 1)
If Digit Like "#" Then
j = j + 1
Mid$(What, j, 1) = Digit
End If
Next
JustNumbers = Left$(What, j)
End Function
Private Function ReadCSV(ByVal Fullname As String) As Variant
'Read a CSV file into an array
Const LDelim = vbCrLf 'Line delimiter
Const FDelim = ";" 'Field delimiter
Dim hFile As Integer
Dim Buffer As String
Dim Lines, Line, Data
Dim i As Long, j As Long
'Be sure the file exists
If Dir(Fullname) = "" Then Exit Function
'Open and read all data
hFile = FreeFile
Open Fullname For Binary Access Read As #hFile
Buffer = Space(LOF(hFile))
Get #hFile, , Buffer
Close #hFile
'Split into lines
Lines = Split(Buffer, LDelim)
'Split the first line and prepare the output
'Note: I assume that all lines have the same number of fields
Line = Split(Lines(0), FDelim)
ReDim Data(0 To UBound(Lines), 0 To UBound(Line))
For i = 0 To UBound(Lines)
Line = Split(Lines(i), FDelim)
For j = 0 To UBound(Line)
'Parse the fields
If IsDate(Line(j)) Then
Data(i, j) = CDate(Line(j))
ElseIf IsNumeric(Line(j)) Then
Data(i, j) = CDbl(Line(j))
Else
Data(i, j) = Line(j)
End If
Next
Next
ReadCSV = Data
End Function -
Populate and header for an excel sheet in SALV
Hi,
I want to download an excel sheet with header in SALV.
Please let me know how to do that.
Thanks & Regards
SanthoshHi,
I’m not sure if I understand your question correctly, so please correct me if I have any misunderstandings.
For the defined names, I assume you mean the named range. If so, you can create the binding to the named range through
Bindings.addFromNamedItemAsync method.
For the styles, I think the article below may give you some help.
How to: Format tables in apps for Excel
By the way, there are no methods to iterate the styles and named range through the current Office JavaScript API.
If this is a feature you want to include in future versions of Office JavaScript API, please submit a feedback to
Office Development Platform User Voice.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Not able to download all the rows to excel sheet from alv grid display
Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = p_capid
datuv = sy-datum
ehndl = '1'
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = p_matnr
stlal = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = i_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
SORT i_stb1 BY idnrk.
DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
FOR ALL ENTRIES IN i_stb1
WHERE bmatn = i_stb1-idnrk AND
datuv LE sy-datum AND
datub GE sy-datum.
SELECT
matnr
bwkey
verpr
stprs
bwprh
FROM mbew
INTO TABLE i_mbew
FOR ALL ENTRIES IN i_stb1
WHERE
matnr EQ i_stb1-idnrk AND
bwkey EQ i_stb1-werks.
IF NOT i_stb1[] IS INITIAL.
SELECT matnr werks beskz
dzeit webaz plifz
ekgrp
INTO TABLE i_marc
FROM marc
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_marc BY matnr werks.
ENDIF.
CLEAR i_ekpo.
CLEAR i_vend.
IF NOT i_stb1[] IS INITIAL.
SELECT ebeln ebelp matnr werks loekz aedat
netpr peinh
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_ekpo BY matnr ASCENDING
aedat DESCENDING
ebeln DESCENDING
ebelp DESCENDING.
IF NOT i_ekpo IS INITIAL.
SELECT k~ebeln k~lifnr l~name1
INTO TABLE i_vend
FROM ekko AS k INNER JOIN lfa1 AS l
ON k~lifnr EQ l~lifnr
FOR ALL ENTRIES IN i_ekpo
WHERE ebeln = i_ekpo-ebeln.
SORT i_vend BY ebeln.
ENDIF.
ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
SORT i_ampl1 BY ematn.
DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
FOR ALL ENTRIES IN i_ampl1
WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_stb
WHERE stlty = i_stb-stlty
AND stlnr = i_stb-stlnr
AND stlkn = i_stb-stlkn
AND stpoz = i_stb-stpoz
AND idnrk = i_stb-idnrk.
SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
READ TABLE i_marc INTO wa_marc
WITH KEY matnr = wa_stb-idnrk
werks = wa_stb-werks
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-beskz = wa_marc-beskz.
wa_outtab-dzeit = wa_marc-dzeit.
wa_outtab-webaz = wa_marc-webaz.
wa_outtab-plifz = wa_marc-plifz.
wa_outtab-ekgrp = wa_marc-ekgrp.
ENDIF.
READ TABLE i_ekpo INTO wa_ekpo
WITH KEY matnr = wa_stb-idnrk.
IF sy-subrc = 0.
wa_outtab-netpr = wa_ekpo-netpr.
wa_outtab-peinh = wa_ekpo-peinh.
READ TABLE i_vend INTO wa_vend
WITH KEY ebeln = wa_ekpo-ebeln
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-lifnr = wa_vend-lifnr.
wa_outtab-name_sup = wa_vend-name1.
ENDIF.
ENDIF.
READ TABLE i_stpo INTO wa_stpo
WITH KEY stlty = wa_stb-stlty
stlnr = wa_stb-stlnr
stlkn = wa_stb-stlkn
stpoz = wa_stb-stpoz
idnrk = wa_stb-idnrk
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-potx1 = wa_stpo-potx1.
wa_outtab-potx2 = wa_stpo-potx2.
ENDIF.
READ TABLE i_mbew INTO wa_mbew
WITH KEY
matnr = wa_stb-idnrk
bwkey = wa_stb-werks.
IF sy-subrc IS INITIAL.
MOVE:
wa_mbew-verpr TO wa_outtab-verpr,
wa_mbew-stprs TO wa_outtab-stprs,
wa_mbew-bwprh TO wa_outtab-bwprh.
ENDIF.
wa_outtab-matnr = p_matnr.
wa_outtab-posnr = wa_stb-posnr.
wa_outtab-stufe = wa_stb-stufe.
wa_outtab-idnrk = wa_stb-idnrk.
wa_outtab-ojtxb = wa_stb-ojtxp.
wa_outtab-menge = wa_stb-menge.
wa_outtab-meins = wa_stb-meins.
MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
IF wa_stb-upskz = 'X'.
SELECT * FROM stpu INTO TABLE i_stpu
WHERE stlty = wa_stb-stlty AND
stlnr = wa_stb-stlnr AND
stlkn = wa_stb-stlkn AND
stpoz = wa_stb-stpoz.
ENDIF.
LOOP AT i_stpu INTO wa_stpu.
wa_outtab-upmng = wa_stpu-upmng.
wa_outtab-ebort = wa_stpu-ebort.
wa_outtab-uposz = wa_stpu-uposz.
CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
SEPARATED BY space.
ENDLOOP.
MOVE strlen( v_ebort ) TO v_len.
MOVE: 0 TO x,
128 TO y.
DATA : lt_tab TYPE TABLE OF swastrtab.
DATA : ls_tab LIKE LINE OF lt_tab.
DATA : lv_ebort TYPE string.
CLEAR lv_ebort. CLEAR lt_tab.
MOVE v_ebort TO lv_ebort.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = lv_ebort
max_component_length = 128
TABLES
string_components = lt_tab
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lt_tab[] IS NOT INITIAL.
LOOP AT lt_tab INTO ls_tab.
CLEAR lv_ebort.
MOVE: ls_tab-str TO lv_ebort.
CONDENSE lv_ebort.
MOVE lv_ebort TO wa_outtab-ebort.
APPEND wa_outtab TO i_outtab.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
* wa_outtab-idnrk.
ENDLOOP.
ELSE.
APPEND wa_outtab TO i_outtab.
ENDIF.
CLEAR v_ebort.
CLEAR: wa_stpu.
REFRESH: i_stpu.
LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
IF sy-subrc = 0.
LOOP AT i_outtab INTO wa_outtab
WHERE
idnrk = wa_stb-idnrk AND
flag NE 'X'.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
MOVE 'X' TO wa_outtab-flag.
MODIFY i_outtab FROM wa_outtab
TRANSPORTING mfrpn mfrnr name1 flag.
EXIT.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-ebort,
* wa_outtab-idnrk,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
APPEND wa_outtab TO i_outtab.
ENDIF.
ENDIF.
REFRESH i_stpu.
CLEAR i_stpu.
ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM -
Comparing 2nd gen and 4th gen ipod touch capacities
Hi
I have a 2nd gen Ipod touch that was 29.4Gb capacity with around 2.8gb left of space. I was gifted with a 4th gen ipod touch which has a 29.06 gb capacity. When I was trying to restore it from the backup of the 2nd gen ipod touch, it says I have 1.6gb left? Of course you have the 0.4gb difference but what happened to the 1.2gb???Was your 2nd gen the same iOS verson?
Does your 2nd gen have the FaceTime app?
Does your 2nd gen have the Camera app?
Does your 2nd gen have the ring tones in Settings -> Sounds?
Does your 2nd gen support separate alarm volume vs media volume controls?
I'm sure there are other differences specific to the 4th gen which the 2nd gen can not do, so it would not include those bits. -
How to get OEM 11.1.0.6 to find 2nd, 3rd and 4th instances on host?
First off, I'm an OEM novice, so speak in 1 or 2 syllable words.
I have 11g OEM installed on a server that has 3 RAC databases. OEM only shows info from the last database that was installed.
1) How do I get it to display the other databases?
I also have a 10g Grid Control on another server. I'd like it to find the databases on the 11g RAC. Do I need to install the 10g Agents on the 11g RAC server? If I do, will it destroy the 11g agents (just in case someone tells me how to do #1)?
Thanks - JRAre you using grid control or are you mentioning about dbconsole?
Agent concept is related with grid control. You install a grid control server and it monitors all the databases that has a grid control agent (one for a server) which points out the grid control server.
dbconsole comes with the database installation and you can configure dbconsole to monitor only one database. -
How to change color of rows count dispalyed while debugging ssis packages
Hello,
in visual 2013 ssdt version I have row count displayed in white color on pale background: bit.ly/1oWP1Cm
I'd like to have it in black. I know it should be changeable in Options -> Fonts and Colors, but what option should I change from myriads available?
Thank you in advance.My colleague had the same issue in that we couldn't see the numbers. We couldn't figure out why we couldn't see the numbers and the design screen was white. It looked like the numbers were displaying in white over the connections lines. So
we changed the color scheme to light and the numbers appeared in black. WHen we switched the color scheme back to dark, the canvas turned dark and the text was in white.
So there must be a bug when selecting the color scheme on the first run of Visual Studio 2013 in that it doesn't set the correct canvas color for the SSIS designer. Luckily toggling the color scheme resolves the issue.
Christian Jones Software Developer, former Network/Sys Admin -
I want to execute a stored procedure using ssis.But the problem I am having is that there is a table with 200 rows with only
single column.Now i want to execute stored procedure using value one by one from table .once the stored procedure is executed with top value from table i also want to delete that topmost column value and execute with next table value.and store the result in
text file.
please help me..or provide a package.If you want to do it in SSIS, a way to do this is by using For Each Loop as mentioned above.
Create 1 OBJECT type variable (list of values) and one STRING type variable (one value at a time)
Use EXE SQL Task with ResultSet = FULL RESULT SET and query = SELECT COL FROM TABLE ORDER BY COL ASC...output this to the OBJECT type variable
Next, a For Each loop container with Foreach ADO Enumerator, ADO object source variable = Object type variable and map that to String type variable with index = 0.
Within your for each loop container, select another EXEC SQL Task and pass in an input parameter (the String type variable) and query = EXEC PROC ? -- WHERE ? = String type variable.
This will execute your store procedure just for that one value out of the whole list.
Now within the same For Each loop, select another EXEC SQL Task and again pass in an input parameter (the same String type variable) and query = DELETE FROM TABLE WHERE COL = ? -- WHERE ? = the current value
The above process should A) get the list of values from the table B) pick one value at a time and execute the proc and delete and right after delete that value from the table.
Hope this helps.
-- some further investigation/tweaking may require but it should help you get started. -
Empty rows from imported excel sheet
Hi all
I use Intelligent Explorer 8.3 and have an imported excel sheet in the query.
If I process this file I receive a lot of empty rows on top the data I like receive. But in this excel sheet there are no empty rows. What could be the problem?
Is there a setting which I can change the path to this excel sheet?
The only way I know is to rename the excel file that I get a message box to set the path again.
Thank you very much in advance
MichaelI solved the problem with the empty rows already. The problem was that Brio retrieves empty rows if they are used before. There is obviously a difference between empty rows which are used and which are unused. But I am still trying to find the excel settings where you can change the path to the excel sheet.
Thank you anyway -
i have two ipod touch 2nd gen and 4th gen that my children ''managed'' to lock (they forgot their password .....)
can you give the way to unlock them?
Thanks in advance.......The only way to do that is to connect to iTunes and erase the data. If iTunes will not let you restore by prompting for the passcode, see: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
What is causing my Mac to crash during the sleep mode?
Hello! I would to have your help on this situation that i am having for a month or so... Ok... it started about a month ago, I turned it on and all of the sudden, it shut down, then rebooted on its own... (actually it rebooted like 3 or 4 times befo
-
Have XML with another embedded XML encoded in base64 - how to extract?
Hi guys, I have a XML-RPC web service that returns a response like this: <methodResponse> <params> <param> <value> <base64> PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPHNlYXJjaFJlc3VsdD48bnVtcm93cz4xPC9udW1yb3dzPjxmb3VuZD4xPC9mb3VuZD48d29yZG
-
Unable to delete Business Partners in CRM
I have used TCode BUPA_PRE_DA to mark a certain BP to status "to be deleted". The message said "Business Partner 123 has status 'Flagged for Delettion". When I went to delete the BP using BUPA_DEL, I couldn't do it. The message says, 'no business par
-
[SOLVED] Wireless connection problem!
I cant connect wireless. It waits at stage 4. see the log. Help pls! lspci output: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14) 05:00.0 Network controller: Intel Corporation WiFi Link
-
Update table column with same auto-increment value, via T-SQL stored procedure
Good Evening to every one, I have a table 'Contracts' as we can see in the picture below (I exported my data on An Excel Spreadsheet). Table's primary key is 'ID' column. I am trying to create a stored procedure (i.e. updContractNum), through which I