Ignore Last node

Hi Group,
In the Message Mapping I have created one node only for File name and in Reciever side Communication channel I have given in the file name schems as %var1%.txt .But in the Content conversion how to handle this,as I dont want to write the Filename record in my output file.
Can any body please suggest

Hi Vijayta,
I have included this in my Content Conversion ,but its giving the following Error:
Error: Message processing failed: Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'PAYSW_031106_182505' too long (>0 for 0. column) - must stop', probably configuration error in file adapter (XML parser error)'
I have added
FNAME.fieldFixedLengths 0
FNAME.FixedLengthTooShortHandling Cut
in my Content Conversion.
Can any body suggest

Similar Messages

How to ignore Last node in Receiver side CC

Hi Group,
I need to prevent one node writting into output file which is coming from Target structure.
I have used
FNAME.fieldFixedLengths 0
FNAME.FixedLengthTooShortHandling Cut
in my Content Conversion.
But its not working.Its giving error in adapter level,saying that field length is greated then 0.
Can any body suggest.

> Hi,
> How does it look after mapping i.e xml format ?
>
> Just to check ...
>
> Regards,
> Moorthy
Hi ,
Here I am attaching XML format after Running in Message Mapping.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_BACSPayment xmlns:ns1="urn://SR3_BACS_01/BACS/BACSPayment"><Recordset><VOL1><KEY>VOL</KEY><LN>1</LN><SSN>000004</SSN><AI> </AI><RES1> </RES1><RES2> </RES2><OI>994915 </OI><RES3> </RES3><LSL>1</LSL></VOL1><HDR1><KEY>HDR1</KEY><FI>A994915S 1994915 </FI><SI>000004</SI><FSN>0001</FSN><FSQN>0001</FSQN><GN> </GN><GVN> </GVN><CD>06299 </CD><ED>06301 </ED><AI>0</AI><BC>000000</BC><SC> </SC><RES> </RES></HDR1><HDR2><KEY>HDR2</KEY><RF>F</RF><BL>00000</BL><RL>00100</RL><RES1> </RES1><BO>00</BO><RES2> </RES2></HDR2><UHL1><KEY>UHL</KEY><LN>1</LN><PD>06300 </PD><IDN>999999 </IDN><CUC>00</CUC><COC>000000</COC><WC>1 DAILY </WC><FN>001</FN><RES1> </RES1><API> </API><RES2> </RES2></UHL1><TC><DSC>123456</DSC><DAN>00123456</DAN><DAT>0</DAT><KEY>99</KEY><OSC>123456</OSC><OAN>00123456</OAN><FF> </FF><AMT>00000005700</AMT><ON>06299LG12 17543400</ON><OR>CONTRA </OR><DN>SOUTHERN WATER </DN></TC><TC><DSC>209148</DSC><DAN>61628011</DAN><DAT>0</DAT><KEY>01</KEY><OSC>123456</OSC><OAN>00123456</OAN><FF> </FF><AMT>00000002300</AMT><ON>SOUTHERN WATER </ON><OR>000400011703X </OR><DN>LG2 </DN></TC><TC><DSC>209148</DSC><DAN>61628011</DAN><DAT>0</DAT><KEY>01</KEY><OSC>123456</OSC><OAN>00123456</OAN><FF> </FF><AMT>00000003400</AMT><ON>SOUTHERN WATER </ON><OR>1234567891234 </OR><DN>LG2 </DN></TC><EOF1><KEY>EOF1</KEY><FI>A994915S 1994915</FI><SI>000004</SI><FSN>0001</FSN><FSEQ>0001</FSEQ><GN> </GN><GVN> </GVN><CD>06299 </CD><ED>06301 </ED><AI>0</AI><BC>000000</BC><SC> </SC><RES> </RES></EOF1><EOF2><KEY>EOF2</KEY><RF>F</RF><BL>00000</BL><RL>00100</RL><RES1> </RES1><BO>00</BO><RES2> </RES2></EOF2><UTL1><KEY>UTL</KEY><LNO>1</LNO><DVT>0000000005700</DVT><CVT>0000000005700</CVT><DIC>0000002</DIC><CIC>0000001</CIC><RES> </RES><DDI> </DDI><SU> </SU></UTL1><EOF><ID>END</ID><RES> </RES></EOF><FNAME><Name>PAYSW_061106_164904</Name></FNAME></Recordset></ns1:MT_BACSPayment>

Table error - Context Path Cannot Be Resolved (Last Node Is Empty)

Hi All,
I am dynamically building up a context node called PoList which is used to hold the contents of a table.
My BAPI is called and a routine transfers the contents of the BAPI context node across into the POList context node. This is rendered correctly on the screen. There is a routine which filters the results based on a vendor. The code works fine when some records are found but when no records are found, I get the error "Context Path POLIST.EBELN Cannot Be Resolved (Last Node Is Empty) ".
The cardinality of the PoList node is 0..N. This should mean that 0 records is valid.
The ABAP which fills the context is pasted below :
data:
 Node_Z_Bapi_Po_Combined type ref to If_Wd_Context_Node,
 Node_Changing_Po type ref to If_Wd_Context_Node,
 Node_T_Header type ref to If_Wd_Context_Node,
 Elem_T_Header type ref to If_Wd_Context_Element,
 itab_C_T_Header type If_Componentcontroller=>Elements_Polist,
 stru_C_T_Header like line of itab_C_T_Header,
 Stru_T_Header type If_Componentcontroller=>Element_T_Header .
data:
 Node_Polist type ref to If_Wd_Context_Node,
 Elem_Polist type ref to If_Wd_Context_Element,
 Stru_Polist type If_Componentcontroller=>Element_Polist.
data:
lri_Element type ref to if_Wd_Context_Element,
loa_Elements type Wdr_Context_Element_Set.
navigate from <CONTEXT> to <Z_BAPI_PO_COMBINED> via lead selection
Node_Z_Bapi_Po_Combined = wd_Context->get_Child_Node( Name = IF_COMPONENTCONTROLLER=>wdctx_Z_Bapi_Po_Combined ).
navigate from <Z_BAPI_PO_COMBINED> to <CHANGING_PO> via lead selection
Node_Changing_Po = Node_Z_Bapi_Po_Combined->get_Child_Node( Name = IF_COMPONENTCONTROLLER=>wdctx_Changing_Po ).
navigate from <CHANGING_PO> to <T_HEADER> via lead selection
Node_T_Header = Node_Changing_Po->get_Child_Node( Name = IF_COMPONENTCONTROLLER=>wdctx_T_Header ).
navigate from <CONTEXT> to <POLIST> via lead selection
Node_Polist = wd_Context->get_Child_Node( Name = IF_COMPONENTCONTROLLER=>wdctx_Polist ).
loa_Elements = node_T_Header->get_Elements( ).
loop at loa_Elements[] into lri_Element.
 lri_Element->get_Static_Attributes(
 importing Static_Attributes = stru_C_T_Header ).
Get the vendor number
 if i_lifnr is initial.
 insert stru_C_T_Header into table itab_C_T_Header[].
 elseif i_lifnr = stru_c_t_header-lifnr.
 insert stru_C_T_Header into table itab_C_T_Header[].
 endif.
endloop.
data : W_LINES TYPE I.
describe table itab_c_t_header lines w_lines.
if w_lines eq 0.
 node_Polist->set_lead_selection_index( 0 ).
 CALL METHOD NODE_POLIST->INVALIDATE.
else.
 node_Polist->bind_Table( itab_C_T_Header ).
 clear itab_C_T_Header[].
endif.
I would have though that invalidating the node would blank the context node and mean that the table is empty but instead I get an error.
Please help.
Richard

Hi Richard,
The problem here is that some UI element tries to bind against a node where the parent node is empty. You have to make sure that the last but one node has at least 1 element, otherwise you should hide the UI element (visibility = NONE).
If the lead selection were empty, the corresponding error message would tell you this, but it explicitely says: "Last Node is Empty", and you can trust it.
One possibility to have at least one element in the node is to change the cardinality to 1..n. If you have a supply function for this node, you have to make sure that there is at least 1 element (bind empty structure to the node), otherwise the framework creates the first element for you.
Ciao, Regina

Ignore last lines in a file using FCC

Hello,
can we ignore last two line in a file, when we are using FCC.
in a file uploaded with some special char like $#@..... due to this mapping getting failed.
i want to ignore last two lines in a file.
Regards,
Chinna

Hi Chinna,
you can also use replaceString funtion to remove all special character and then use result for date transformation like shown below.
Hope it will be helpful for you.
Regards
Jitender

Finding the "last node" in a hierarchical query?

I'm presented with an issue - find all parent records for which the "last node" in a hierarchy is not set to some value.
Table structure:
child_id number
parent_id number
type_id number
So, I need to find all parents whose eventual last "children" (could be several levels deep, it varies) do not have a type_id of 29.
I can find the hierarchy easily using connect by prior but I'm stuck on that "last node" bit. Any help out there?

user9937402 wrote:
I'm finding that the CONNECT_BY_ISLEAF is showing all leaves set to 0, even if they themselves are parents (i.e. not the last node in the tree).
Post your code.
I'm not following the 2nd example. Where are you getting those values? This is a really large table, so if that is actual data ... that won't work.Since you did not post data sample, SBH cooked up one on-the-fly using subquery factoring clause - WITH. Below is example on existing table, so I don't need to use WITH:
SQL> select lpad(' ',level*2) || ename ename,
2          connect_by_isleaf
3    from emp
4    start with mgr is null
5    connect by mgr = prior empno
6 /
ENAME                                                                CONNECT_BY_ISLEAF
KING                                                                               0
    JONES                                                                            0
      SCOTT                                                                          0
        ADAMS                                                                        1
      FORD                                                                           0
        SMITH                                                                        1
    BLAKE                                                                            0
      ALLEN                                                                          1
ENAME                                                                CONNECT_BY_ISLEAF
      WARD                                                                           1
      MARTIN                                                                         1
      TURNER                                                                         1
      JAMES                                                                          1
    CLARK                                                                            0
      MILLER                                                                         1
14 rows selected.
SQL> As you can see CONNECT_BY_ISLEAF works as expected.
SY.

Ignoring last 2 lines while reading the file

Hi All,
I have a file structure as mentioned below :
ab
ab
ab
ab
=======
=
While reading a file , i need to ignore the last 2 lines . How to achieve this using FCC parameters.
Regards
Vinay P.

Hi,
I am not aware of any parameters in FCC to ignore last lines but work around can be :
You may create one structure to read last 2 lines if depending on file structure and ignore it in mapping (map all records except this structure).
Regards,
Beena.

Find highest order and last node in a tree..

the problem is:-
suposse A is parent node and order 1
A's child is B and order 2
B's child is C and order 3
B's child is D and order 4
D child is E order 5
E child is F order 6
A's child is G and order 7
how can i find the highest order is 7 and last node is F order 6 of above thee?
order is from which tree is sorted assecnding.
Edited by: user1157479 on Aug 24, 2009 10:57 PM

with t as (
select '' par,'A' chi from dual union all
select 'A' par,'B' chi from dual union all
select 'B' par,'C' chi from dual union all
select 'C' par,'D' chi from dual union all
select 'D' par,'E' chi from dual union all
select 'E' par,'F' chi from dual union all
select 'A' par,'G' chi from dual )
select maxlvl,chi,maxorder from (select p.*,max(lvl) over () maxlvl,max(rnum) over () maxorder from (select t.*,level lvl,rownum rnum from t connect by prior chi=par start with chi='A') p) where rnum=maxlvlRavi Kumar
Edited by: ravikumar.sv on Aug 25, 2009 11:45 AM

Sender File Adapter Ignore Last Line

Hi All,
Like in Sender File Adapter configuration like we have Document Offset to specify the number of starting lines to be ignored,
Like the same way can we ignore the last line of a text file .
Regards,
Rahul

Rahul,
>I somehow wait for your answer,
Is that a compliment
I guess there is no standard way to ignore the last line . Like you pointed out, read the line and ignore it in the mapping!
>btw ..
suppose in a flat file..
i just want to read the 4th line??
is there any way i can do this?
Again no straight forward way to do this. You can use KeyFields etc , but there is no direct way to do this and every solution would depend on the exact requirements!
Regards
Bhavesh
PS Are the alerts issues resolved?

How to ignore a node while reading data from XML file

Hi All,
I have a XML file that i am reading that XML file using XMLStreamReader and then i need to create another XML file that has specific nodes(from the database).
I need to ignore nodes(with values) that are not in the database and while creating the XML file, only nodes that are it the database should be written in the new file.*
For eg.
<XML>
<Stud>
<Name>XYZ</Name>
<Roll>1</Roll>
<Class>1</Class>
</Stud>
<Stud>
<Name>ABC</Name>
<Roll>2</Roll>
<Class>1</Class>
</Stud>
</XML>
In database i have only two node :<Name> and <Roll>.
So, my new XML will be
<XML>
<Stud>
<Name>XYZ</Name>
<Roll>1</Roll>
</Stud>
<Stud>
<Name>ABC</Name>
<Roll>2</Roll>
</Stud>
</XML>

Hi gborges,
Since you're new to LabVIEW, I thought I would post a few helpful links. A great way to learn some LabVIEW basics is to look over the introductions --
Three Hour LabVIEW Introduction Course
Six Hour LabVIEW Introduction Course
You might even want to think about signing up for the LabVIEW Basics I & II courses which are taught by Applications Engineers. You can always search for KnowledgeBases and, of course, you already know about our forums!
Happy coding,
Megan B.
National Instruments

How to ignore last four lines in file

Hey All,
We have a requirement where we have to ignore the last four lines of the text file using file sender communication channel. We are using file content conversion and there is no identifier as such which would identify this four lines separately.
Please reply back to me soon.
Thanks and Regards,
Sandeep Maurya

1.you can do that by writing a commondline script if have unix operation system iam not sure if we can do that same by in windows by ingoring the last line of a file.
or
2. wirte a Module Processor code
3. wirte a UDF in mapping and and not map the last four lines but you need to check for every field.
Regards
Sreeram.G.Reddy
Message was edited by:
Sreeram Reddy

Tree control with xml last node!

The question is how to view the tree lastleaf as last
nodename + nodevalue in an xmlobject?
<node1>
<node1a>10
</node1a>
</node1>
<node2>
<node2a>
<node2b>20
</node2b>
</node2a>
</node2>
I want the tree structure like:
Node1 (folder icon)
Node1a = 10 (doc icon)
Node2
Node2a
Node2b = 20 (doc icon)
In Flex the tree views:
Node1 (folder icon)
Node1a (folder icon)
10 (doc icon)
Node2
Node2a
Node2b (folder icon)
20 (doc icon)
in my app I get a result from a webservice that returns some
nodes that can have one or more values. Say Node1a can have 10, 34,
43, so in the tree leaf I it should view Node1a = 10, 34, 43.
Any suggestions?

The problem is when the value is between xml tags (
<node>value</node>) the node name gets folder icon and
value gets doc. icon.
With lot of last elements, one has to click every node to see
the values.
With labelFunction every leaf gets null value:
If hasComplex return localname
Else
Return localname + children
When I try to pars xml to new one, hasChildren returns true
for las element, and if there is no value the node shows null.
Then walking the xml recursively how do I insert the nodes in
new xml with the same structure but tags like (<node
data=”value” />)? (to XMLListCollection)
Hope it’s clearer

Create Abstract List from Node contains repeat of last node element

My custom controller is giving me fits.
I have a structure (Empl_Pernr) in my model that needs to be part of the input before calling a second BAPI. The source of this input is the output of another BAPI - thus a structure. The structure that is input is found in wdContext.node<NODENAME> contains 5 distinct entries. When I run the following code the abstract list created is 5 long but only contains the LAST element in the node I was "unloading".
AbstractList emplList = new Zhr_Empl_Pernr.Zhr_Empl_Pernr_List();
Zhr_Empl_Pernr emplItem = new Zhr_Empl_Pernr();
for(int i = 0; i < wdContext.node<NODENAME>().size(); i++)
emplItem.setLastName(wdContext.node<NODENAME>().getOrg_OutElementAt(i).getLastName());
emplItem.setPersNo(wdContext.node<NODENAME>().getOrg_OutElementAt(i).getPersNo());
emplList.add(i,emplItem);
inputMangHours.setEmpl_Pernr(emplList);
INPUT
Last name PersNo
Last1 02600174
Last2 02600176
Last3 02600265
Last4 02600266
Last5 02600268
OUTPUT
Last name PersNo
Last5 02600268
Last5 02600268
Last5 02600268
Last5 02600268
Last5 02600268
What did I miss?

Diane,
You are not creating the object inside the loop. You are just changing the same object again and again. Because of object references its updating all previous entries. Simple to say you are adding same element 5 times.
Change the code this way...
AbstractList emplList = new Zhr_Empl_Pernr.Zhr_Empl_Pernr_List();
Zhr_Empl_Pernr = null;
for(int i = 0; i < wdContext.node<NODENAME>().size(); i++)
emplItem = new Zhr_Empl_Pernr();
emplItem.setLastName(wdContext.node<NODENAME>().getOrg_OutElementAt(i).getLastName());
emplItem.setPersNo(wdContext.node<NODENAME>().getOrg_OutElementAt(i).getPersNo());
emplList.add(i,emplItem);
Regards
Abhilash

Force Crawler in Maint Mode to Ignore Last Modified Data and Re-Index All

We are running SES 10.1.8.4 with the Siebel 7.8 data source patches 8533402 and 8624308 to index documents (PDF, XLS, DOC, PPT) via RMI and Decompression Tool in Siebel. This data source is virtually identical to the database data source.
The crawler will not "fail" if the actual indexing of the attachment file itself fails. For example, if RMI is down on the Siebel server and the crawler runs, SES will index the document metadata returned in the SQL but not the document. If the client then starts the RMI utility and re-runs the crawler, the document that was not indexed will not be re-indexed because the data source's last crawl time is used against the data sources last modified date attribute.
Here is the pseudo SQL for the initial crawler query in maintenance mode....
SELECT .... FROM MY_VIEW WHERE LASTMODIFIEDATE > TIME OF LAST DATA SOURCE CRAWL
We have found a way to update the data source's last crawl time (DS_LAST_CRAWL) in the EQ$_DATA_SOURCE table. For now, we simply are using SYSDATE - 1.
This will allow the missed document to be returned in the initial query.
However, it's the crawler's document-level last modified date check within the crawler that is preventing the re-index. Since the document's last modified date is the same as what SES has, SES skips over it thinking it has not changed. True, it has not changed but it was missed during the last re-crawl and we want it to be indexed again.
The client does NOT want to perform a full re-index because of the anticipated volume of attachments.
Is there any way to tell the crawler to ignore the document-level last modified date and re-index everything returned from the initial query? Perhaps one of the other columns in the EQ$_DATA_SOURCE (DS_STATUS, DS_CRAWLING_MODE) holds the key?
Thanks!

I think it might be possible to set ENQUEUE_STATUS = 'Y' in the table EQ_TEST.EQ$URL. You may need to call eq_adm.use_instance(1) before doing so.
However I'm not sure of the full implications of doing this - DON'T DO IT ON A PRODUCTION SYSTEM without carefully testing on a development system.

Appendchildxml appending to the last node

Hi,
VERSION: 10.2.0.1.0
This is the description of appendchildxml;
appendChildXML Insert XML nodes of any kind as the[b] last child nodes of a given element node.
How would I append a xmlnode to the first child of a given xmlnode using the xpath?
Thank you.
Ok, maybe the question is wrong but, this is what I need using sqlx functions (not dbms_xmldom)...
SELECT appendchildxml
(XMLTYPE
('<root><Record Index="1"><ValueMark Index="11"><SubValueMark Index="1" Name="CC" Value="01" /></ValueMark></Record><Record Index="2"><ValueMark Index="22"></ValueMark></Record></root>'
'/root/Record[@Index=1]',
xmltype('<ValueMark Index="1"><SubValueMark Index="1" Name="TK" Value="!" /></ValueMark>')
FROM DUAL;
I want the childxmlnode to be appended to the parent BEFORE the ValueMark=11 attribute.
Message was edited by:
rputtagunta
Message was edited by:
rputtagunta
Message was edited by:
rputtagunta

Does this help
SQL> select insertChildXML
2 (
3 xmltype('<FOO><BAA/></FOO>'),
4 '/FOO/BAA',
5 'CHILD',
6 xmltype('<CHILD/>')
7 )
8 from dual
9 /
INSERTCHILDXML(XMLTYPE('<FOO><BAA/></FOO>'),'/FOO/BAA','CHILD',XMLTYPE('<CHILD/>'))
<FOO>
<BAA>
 <CHILD/>
</BAA>
</FOO>
SQL> select insertXMLBefore
2 (
3 xmltype('<FOO><BAA><CHILD/></BAA></FOO>'),
4 '/FOO/BAA/CHILD',
5 xmltype('<SIBLING/>')
6 )
7 from dual
8 /
INSERTXMLBEFORE(XMLTYPE('<FOO><BAA><CHILD/></BAA></FOO>'),'/FOO/BAA/CHILD',XMLTYPE('<SIBLING/>'))
<FOO>
<BAA>
 <SIBLING/>
 <CHILD/>
</BAA>
</FOO>
SQL> select appendChildXML
2 (
3 xmltype('<FOO><BAA><CHILD/></BAA></FOO>'),
4 '/FOO/BAA',
5 xmltype('<SIBLING/>')
6 )
7 from dual
8 /
APPENDCHILDXML(XMLTYPE('<FOO><BAA><CHILD/></BAA></FOO>'),'/FOO/BAA',XMLTYPE('<SIBLING/>'))
<FOO>
<BAA>
 <CHILD/>
 <SIBLING/>
</BAA>
</FOO>
SQL>

Expanding Tree till Last Node, in one shot, in WebDynPro ABAP

Hi Colleagues,
I am working on this tree structure of technical objects where i need to Expand ALL the nodes of the tree in one click. Please let me know if this is posible.
Regards,
Anoop

Hi Anoop,
U have expand_node --> Use this method to expand a particular node
expand_nodes --> Use this method to expand a list of nodes
get_expanded_nodes -->This method returns a node table containing the keys of all expanded nodes
Check on to this link for further details hoe to implement inside ur coding.
http://help.sap.com/saphelp_erp2005/helpdata/en/1b/2a7536a9fd11d2bd6f080009b4534c/frameset.htm
Hope this helps u,
Regards,
Nagarajan.

Ignore Last node

Similar Messages

Maybe you are looking for